Etienne: Somewhat strangely the sound card started working with the older kernel when I used modprobe to install the snd_via82xx module, insmod gave error about unknown symbol in the module (some kind of a problem with new module-init-tools?) ... and then used alsamixer to remove the mutes from Master and PCM.
Here is a dmesg, it seems that one of the cards (the one integrated to the motherboar) uses skge and the one in PCI-slot sk98lin, go figure ... [4294774.165000] sk98lin: Network Device Driver v8.23.1.3 [4294774.165000] (C)Copyright 1999-2005 Marvell(R). [4294774.182000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 36 (level, low) -> IRQ 36 [4294774.199000] PCI: Setting latency timer of device 0000:05:00.0 to 64 [4294774.263000] eth1: Marvell Yukon 88E8053 Gigabit Ethernet Controller [4294774.272000] PrefPort:A RlmtMode:Check Link State [4294785.683000] eth1: network connection up using port A [4294785.683000] speed: 1000 [4294785.683000] autonegotiation: yes [4294785.683000] duplex mode: full [4294785.683000] flowctrl: symmetric [4294785.683000] role: slave [4294785.683000] irq moderation: disabled [4294785.683000] tcp offload: enabled [4294785.683000] scatter-gather: enabled [4294785.683000] tx-checksum: enabled [4294785.683000] rx-checksum: enabled [4294785.683000] rx-polling: enabled [4294794.297000] eth1: no IPv6 routers present [4294814.398000] skge eth0: enabling interface [4294816.828000] skge eth0: Link is up at 1000 Mbps, full duplex, flow control tx and rx [4294824.555000] eth0: no IPv6 routers present I'll try the driver next week (important deadline on Friday and weekend for the last fixes :-). -- [sky2] Marvell ethernet interface doesn' t work after reboot https://launchpad.net/bugs/39862 -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
