I tried the "sudo rmmod ehci_hcd" command at the above referenced site.
Now I'm not getting a response when plugging in the drive. Here's the
output from lsusb and dmesg:
====
lsusb
====
Bus 002 Device 003: ID 0aec:3260 Neodio Technologies Corp. 7-in-1 Card Reader
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
====
dmesg
====
[ 8904.153931] FAT: Directory bread(block 28681) failed
[ 8904.153937] FAT: Directory bread(block 28682) failed
[ 8904.153942] FAT: Directory bread(block 28683) failed
[ 8904.153947] FAT: Directory bread(block 28684) failed
[ 8904.153952] FAT: Directory bread(block 28685) failed
[ 8904.153957] FAT: Directory bread(block 28686) failed
[ 8904.153962] FAT: Directory bread(block 28687) failed
[ 8904.153968] FAT: Directory bread(block 28688) failed
[ 8904.153973] FAT: Directory bread(block 28689) failed
[ 8904.328026] usb 2-8: new high speed USB device using ehci_hcd and address 14
[ 8904.440034] usb 2-8: device descriptor read/64, error -71
[ 8904.656043] usb 2-8: device descriptor read/64, error -71
[ 8904.872029] usb 2-8: new high speed USB device using ehci_hcd and address 15
[ 8904.984496] usb 2-8: device descriptor read/64, error -71
[ 8905.200021] usb 2-8: device descriptor read/64, error -71
[ 8905.419264] usb 2-8: new high speed USB device using ehci_hcd and address 16
[ 8905.828020] usb 2-8: device not accepting address 16, error -71
[ 8905.939284] usb 2-8: new high speed USB device using ehci_hcd and address 17
[ 8906.345025] usb 2-8: device not accepting address 17, error -71
[ 8906.345047] hub 2-0:1.0: unable to enumerate USB device on port 8
[ 8906.801033] usb 1-8: new full speed USB device using ohci_hcd and address 4
[ 8906.985027] usb 1-8: device descriptor read/64, error -62
[ 8907.273026] usb 1-8: device descriptor read/64, error -62
[ 8907.554795] usb 1-8: new full speed USB device using ohci_hcd and address 5
[ 8907.737027] usb 1-8: device descriptor read/64, error -62
[ 8908.021023] usb 1-8: device descriptor read/64, error -62
[ 8908.301055] usb 1-8: new full speed USB device using ohci_hcd and address 6
[ 8908.709021] usb 1-8: device not accepting address 6, error -62
[ 8908.885023] usb 1-8: new full speed USB device using ohci_hcd and address 7
[ 8909.293018] usb 1-8: device not accepting address 7, error -62
[ 8909.293067] hub 1-0:1.0: unable to enumerate USB device on port 8
[ 9140.252018] usb 2-8: new high speed USB device using ehci_hcd and address 18
[ 9140.364016] usb 2-8: device descriptor read/64, error -71
[ 9140.580015] usb 2-8: device descriptor read/64, error -71
[ 9140.796015] usb 2-8: new high speed USB device using ehci_hcd and address 19
[ 9140.908015] usb 2-8: device descriptor read/64, error -71
[ 9141.124034] usb 2-8: device descriptor read/64, error -71
[ 9141.340016] usb 2-8: new high speed USB device using ehci_hcd and address 20
[ 9141.748013] usb 2-8: device not accepting address 20, error -71
[ 9141.860015] usb 2-8: new high speed USB device using ehci_hcd and address 21
[ 9142.268021] usb 2-8: device not accepting address 21, error -71
[ 9142.268044] hub 2-0:1.0: unable to enumerate USB device on port 8
[ 9142.724014] usb 1-8: new full speed USB device using ohci_hcd and address 8
[ 9142.908015] usb 1-8: device descriptor read/64, error -62
[ 9143.192021] usb 1-8: device descriptor read/64, error -62
[ 9143.472015] usb 1-8: new full speed USB device using ohci_hcd and address 9
[ 9143.656015] usb 1-8: device descriptor read/64, error -62
[ 9143.940014] usb 1-8: device descriptor read/64, error -62
[ 9144.220021] usb 1-8: new full speed USB device using ohci_hcd and address 10
[ 9144.628014] usb 1-8: device not accepting address 10, error -62
[ 9144.804014] usb 1-8: new full speed USB device using ohci_hcd and address 11
[ 9145.212024] usb 1-8: device not accepting address 11, error -62
[ 9145.212047] hub 1-0:1.0: unable to enumerate USB device on port 8
[ 9342.604017] usb 2-8: new high speed USB device using ehci_hcd and address 22
[ 9342.738218] usb 2-8: configuration #1 chosen from 1 choice
[ 9342.738995] scsi17 : SCSI emulation for USB Mass Storage devices
[ 9342.739235] usb-storage: device found at 22
[ 9342.739237] usb-storage: waiting for device to settle before scanning
[ 9347.736202] usb-storage: device scan complete
[ 9347.737303] scsi 17:0:0:0: Direct-Access WDC WD80 0JB-00JJA0 1C05
PQ: 0 ANSI: 2 CCS
[ 9347.738659] sd 17:0:0:0: [sdg] 156301488 512-byte hardware sectors (80026 MB)
[ 9347.742556] sd 17:0:0:0: [sdg] Write Protect is off
[ 9347.742563] sd 17:0:0:0: [sdg] Mode Sense: 00 38 00 00
[ 9347.742565] sd 17:0:0:0: [sdg] Assuming drive cache: write through
[ 9347.753573] sd 17:0:0:0: [sdg] 156301488 512-byte hardware sectors (80026 MB)
[ 9347.756911] sd 17:0:0:0: [sdg] Write Protect is off
[ 9347.756919] sd 17:0:0:0: [sdg] Mode Sense: 00 38 00 00
[ 9347.756921] sd 17:0:0:0: [sdg] Assuming drive cache: write through
[ 9347.756926] sdg: sdg1 sdg2 <<6>usb 2-8: USB disconnect, address 22
[ 9347.775693] sd 17:0:0:0: [sdg] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[ 9347.775701] end_request: I/O error, dev sdg, sector 58701504
[ 9347.775706] Buffer I/O error on device sdg, logical block 7337688
[ 9347.775758] sd 17:0:0:0: [sdg] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[ 9347.775761] end_request: I/O error, dev sdg, sector 58701504
[ 9347.775764] Buffer I/O error on device sdg, logical block 7337688
[ 9347.775774] >
[ 9347.776034] sd 17:0:0:0: [sdg] Attached SCSI disk
[ 9347.776164] sd 17:0:0:0: Attached scsi generic sg7 type 0
[ 9348.048018] usb 2-8: new high speed USB device using ehci_hcd and address 23
[ 9348.160016] usb 2-8: device descriptor read/64, error -71
[ 9348.376015] usb 2-8: device descriptor read/64, error -71
[ 9348.592015] usb 2-8: new high speed USB device using ehci_hcd and address 24
[ 9348.704015] usb 2-8: device descriptor read/64, error -71
[ 9348.921012] usb 2-8: device descriptor read/64, error -71
[ 9349.136016] usb 2-8: new high speed USB device using ehci_hcd and address 25
[ 9349.544015] usb 2-8: device not accepting address 25, error -71
[ 9349.656016] usb 2-8: new high speed USB device using ehci_hcd and address 26
[ 9350.064015] usb 2-8: device not accepting address 26, error -71
[ 9350.064028] hub 2-0:1.0: unable to enumerate USB device on port 8
[ 9350.520015] usb 1-8: new full speed USB device using ohci_hcd and address 12
[ 9350.704014] usb 1-8: device descriptor read/64, error -62
[ 9350.988014] usb 1-8: device descriptor read/64, error -62
[ 9351.268014] usb 1-8: new full speed USB device using ohci_hcd and address 13
[ 9351.448014] usb 1-8: device descriptor read/64, error -62
[ 9351.732021] usb 1-8: device descriptor read/64, error -62
[ 9352.012015] usb 1-8: new full speed USB device using ohci_hcd and address 14
[ 9352.420014] usb 1-8: device not accepting address 14, error -62
[ 9352.596015] usb 1-8: new full speed USB device using ohci_hcd and address 15
[ 9353.005012] usb 1-8: device not accepting address 15, error -62
[ 9353.005020] hub 1-0:1.0: unable to enumerate USB device on port 8
====
lsb_release -a
====
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 8.10
Release: 8.10
Codename: intrepid
====
lsusb -v
====
Bus 002 Device 003: ID 0aec:3260 Neodio Technologies Corp. 7-in-1 Card Reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0aec Neodio Technologies Corp.
idProduct 0x3260 7-in-1 Card Reader
bcdDevice 1.8a
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
can't get hub descriptor: Operation not permitted
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 003: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc019 Optical Tilt Wheel Mouse
bcdDevice 43.01
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 55
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0005 1x 5 bytes
bInterval 10
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
-- end --
--
External FAT32 Hard Drive USB Connection Dies
https://bugs.launchpad.net/bugs/321207
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
