I have dmesgs for the case of working (in Mandriva) and not working (in Ubuntu dapper).
Working: [17179598.448000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [17179598.448000] Yenta: CardBus bridge found at 0000:00:0a.0 [104d:80f6] [17179598.448000] Yenta: Enabling burst memory read transactions [17179598.448000] Yenta: Using CSCINT to route CSC interrupts to PCI [17179598.448000] Yenta: Routing CardBus interrupts to PCI [17179598.448000] Yenta TI: socket 0000:00:0a.0, mfunc 0x012c1222, devctl 0x66 [17179598.680000] Yenta: ISA IRQ mask 0x0808, PCI irq 9 [17179598.680000] Socket status: 30000006 [17179598.692000] ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [17179598.692000] Yenta: CardBus bridge found at 0000:00:0a.1 [104d:80f6] [17179598.692000] Yenta: Using CSCINT to route CSC interrupts to PCI [17179598.692000] Yenta: Routing CardBus interrupts to PCI [17179598.692000] Yenta TI: socket 0000:00:0a.1, mfunc 0x012c1222, devctl 0x66 [17179598.924000] Yenta: ISA IRQ mask 0x0808, PCI irq 10 [17179598.924000] Socket status: 30000010 [17179599.872000] cs: IO port probe 0xc00-0xcff: clean. [17179599.872000] cs: IO port probe 0xc00-0xcff: clean. [17179599.872000] cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f 0x4d0-0x4d7 [17179599.876000] cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f 0x4d0-0x4d7 [17179599.880000] cs: IO port probe 0xa00-0xaff: clean. [17179599.880000] cs: IO port probe 0xa00-0xaff: clean. [17179599.920000] cs: memory probe 0xa0000000-0xa0ffffff: clean. [17179600.732000] eth1: 3Com 3c589, io 0x300, irq 3, hw_addr 00:00:86:1A:4E:A8 [17179600.732000] 8K FIFO split 5:3 Rx:Tx, auto xcvr [17179600.776000] ttyS1 at I/O 0x2f8 (irq = 10) is a 16550A Not working (ubuntu dapper): [17179598.628000] Yenta: CardBus bridge found at 0000:00:0a.0 [104d:80f6] [17179598.628000] Yenta: Using CSCINT to route CSC interrupts to PCI [17179598.628000] Yenta: Routing CardBus interrupts to PCI [17179598.628000] Yenta TI: socket 0000:00:0a.0, mfunc 0x012c1222, devctl 0x66 [17179598.788000] **** SET: Misaligned resource pointer: d961bb22 Type 07 Len 0 [17179598.788000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [17179598.788000] PCI: setting IRQ 5 as level-triggered [17179598.788000] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [17179598.788000] PCI: Setting latency timer of device 0000:00:07.5 to 64 [17179598.860000] Yenta: ISA IRQ mask 0x0808, PCI irq 9 [17179598.860000] Socket status: 30000068 [17179598.860000] ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [17179598.860000] Yenta: CardBus bridge found at 0000:00:0a.1 [104d:80f6] [17179598.860000] Yenta: Using CSCINT to route CSC interrupts to PCI [17179598.860000] Yenta: Routing CardBus interrupts to PCI [17179598.860000] Yenta TI: socket 0000:00:0a.1, mfunc 0x012c1222, devctl 0x66 [17179598.940000] parport_pc: VIA parallel port: io=0x378, irq=7 [17179599.008000] Real Time Clock Driver v1.12 [17179599.092000] Yenta: ISA IRQ mask 0x0808, PCI irq 10 [17179599.092000] Socket status: 30000059 .... [17179600.324000] cs: IO port probe 0x100-0x3af: clean. [17179600.324000] cs: IO port probe 0x3e0-0x4ff: clean. [17179600.324000] cs: IO port probe 0x820-0x8ff: clean. [17179600.328000] cs: IO port probe 0xc00-0xcf7: clean. [17179600.328000] cs: IO port probe 0xa00-0xaff: clean. [17179600.328000] cs: IO port probe 0x100-0x3af: clean. [17179600.332000] cs: IO port probe 0x3e0-0x4ff: clean. [17179600.332000] cs: IO port probe 0x820-0x8ff: clean. [17179600.332000] cs: IO port probe 0xc00-0xcf7: clean. [17179600.336000] cs: IO port probe 0xa00-0xaff: clean. [17179600.336000] cs: memory probe 0xa0000000-0xa0ffffff: clean. [17179600.340000] pcmcia: registering new device pcmcia1.0 [17179600.620000] rtl8180: Setting SW wep key [17179600.724000] eth1: 3Com 3c589, io 0x300, irq 3, hw_addr 00:00:86:1A:4E:A8 [17179600.724000] 8K FIFO split 5:3 Rx:Tx, auto xcvr ... [17180448.512000] pccard: card ejected from slot 1 [17180487.964000] pccard: PCMCIA card inserted into slot 1 [17180487.964000] pcmcia: registering new device pcmcia1.0 [17180488.016000] eth1: 3Com 3c589, io 0x300, irq 3, hw_addr 00:00:86:1A:4E:A8 [17180488.016000] 8K FIFO split 5:3 Rx:Tx, auto xcvr [17180498.796000] eth1: no IPv6 routers present ...and no modem (well, serial) detected. -- Multi-function pcmcia card: only function 0 detected. https://launchpad.net/bugs/52510 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
