I just wanted to say that I may have made a little bit of progress with this. I was playing around with loading/unloading different kernel modules to see if it affected anything. It appears to be kind of flaky, but I'm able to get it to detect my sensor sometimes. For this, I did: sudo modprobe gspca_sonixj sudo rmmod gspca_sonixj
This leaves gspca_main on, but not gspca_sonixj. Unfortunately, I don't think it was working with just loading gspca_main. Here's a little more info from dmesg: [24427.409166] usb 2-1: USB disconnect, address 5 [24431.700197] usb 2-1: new full speed USB device using uhci_hcd and address 6 [24431.857444] usb 2-1: configuration #1 chosen from 1 choice [24431.944081] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49 [24431.946202] usb 2-1: SN9C120 PC Camera Controller detected (vid:pid 0x0C45:0x613C) [24432.070179] usb 2-1: No supported image sensor detected for this bridge [24432.070216] usbcore: registered new interface driver sn9c102 [24701.273384] gspca: main v2.2.0 registered [24701.287301] usbcore: registered new interface driver sonixj [24701.287315] sonixj: registered [24704.920119] usb 2-1: USB disconnect, address 6 [24711.732136] usb 2-1: new full speed USB device using uhci_hcd and address 7 [24711.891428] usb 2-1: configuration #1 chosen from 1 choice [24711.896186] usb 2-1: SN9C120 PC Camera Controller detected (vid:pid 0x0C45:0x613C) [24712.047202] usb 2-1: No supported image sensor detected for this bridge [24764.729937] usbcore: deregistering interface driver sonixj [24764.733141] sonixj: deregistered [24766.424141] usb 2-1: USB disconnect, address 7 [24772.397129] usb 2-1: new full speed USB device using uhci_hcd and address 8 [24772.552444] usb 2-1: configuration #1 chosen from 1 choice [24772.558177] usb 2-1: SN9C120 PC Camera Controller detected (vid:pid 0x0C45:0x613C) [24772.614152] usb 2-1: HV7131R image sensor detected [24772.936189] usb 2-1: Initialization succeeded [24772.940713] usb 2-1: V4L2 device registered as /dev/video0 [24772.940724] usb 2-1: Optional device control through 'sysfs' interface disabled jonat...@jonathan-ubuntu:~$ lsmod | grep gspca gspca_main 33536 0 compat_ioctl32 18304 2 gspca_main,sn9c102 videodev 46720 3 gspca_main,sn9c102,compat_ioctl32 usbcore 175888 6 gspca_main,sn9c102,btusb,uhci_hcd,ehci_hcd Previously, that command didn't bring up anything because gspca wasn't loading at all. Unfortunately even though the sensor is detected, I can't get any apps to recognize it. Cheese and Ekiga both just hang like they're trying to use it, but can't. I also tried using the LD_PRELOAD stuff, but that didn't seem to help. So I'm thinking this is just a waste of time, but I thought I'd offer it up just in case anyone can make more sense of it than I can. Also, I tried loading a few other modules, like gspca_sonixb, without much luck. If anyone has any other suggestions for things to try, I'll do it! -- Intrepid kernel 2.6.27-6 no supported image sensor dected for SN9C105 (045e, 00f7) https://bugs.launchpad.net/bugs/280657 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
