@Andy -- OK, I rebooted with the new Kernel and connected with ssh: christ...@gobuchul:~$ ssh 192.168.1.33 [email protected]'s password: Linux Jandraligeli 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686
Then I watched via ssh in /var/log/messages and /var/log/kern.log as the notebook went to sleep. These are the results: christ...@jandraligeli:~$ tail -f /var/log/messages Feb 10 21:22:31 Jandraligeli kernel: [ 41.398446] tg3: eth0: Flow control is on for TX and on for RX. Feb 10 21:22:31 Jandraligeli kernel: [ 41.398652] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 10 21:22:33 Jandraligeli kernel: [ 42.966881] [drm] Initialized drm 1.1.0 20060810 Feb 10 21:22:33 Jandraligeli kernel: [ 42.981785] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Feb 10 21:22:33 Jandraligeli kernel: [ 42.984666] [drm] Initialized i915 1.6.0 20060119 on minor 0 Feb 10 21:22:40 Jandraligeli pulseaudio[6044]: ltdl-bind-now.c: Failed to find original dlopen loader. Feb 10 21:22:40 Jandraligeli pulseaudio[6046]: pid.c: Stale PID file, overwriting. Feb 10 21:22:40 Jandraligeli pulseaudio[6046]: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted Feb 10 21:22:40 Jandraligeli pulseaudio[6046]: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted christ...@jandraligeli:~$ tail -f /var/log/kern.log Feb 10 21:31:48 Jandraligeli kernel: [ 76.440173] CPU1 attaching sched-domain: Feb 10 21:31:48 Jandraligeli kernel: [ 76.440177] domain 0: span 0-1 level MC Feb 10 21:31:48 Jandraligeli kernel: [ 76.440182] groups: 1 0 Feb 10 21:31:54 Jandraligeli kernel: [ 84.175932] wlan0: authenticate with AP 00:21:29:66:21:b0 Feb 10 21:31:54 Jandraligeli kernel: [ 84.177860] wlan0: authenticated Feb 10 21:31:54 Jandraligeli kernel: [ 84.177872] wlan0: associate with AP 00:21:29:66:21:b0 Feb 10 21:31:54 Jandraligeli kernel: [ 84.180300] wlan0: RX AssocResp from 00:21:29:66:21:b0 (capab=0x411 status=0 aid=1) Feb 10 21:31:54 Jandraligeli kernel: [ 84.180310] wlan0: associated Feb 10 21:31:54 Jandraligeli kernel: [ 84.190007] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Feb 10 21:32:05 Jandraligeli kernel: [ 95.032120] wlan0: no IPv6 routers present When the notebook resumed it cut off/crashed again and I have to boot it pressing the power button. Then I tried it with WLAN disabled: christ...@jandraligeli:~$ tail -f /var/log/messages Feb 10 21:35:00 Jandraligeli pulseaudio[6035]: ltdl-bind-now.c: Failed to find original dlopen loader. Feb 10 21:35:00 Jandraligeli pulseaudio[6037]: pid.c: Stale PID file, overwriting. Feb 10 21:35:00 Jandraligeli pulseaudio[6037]: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted Feb 10 21:35:00 Jandraligeli pulseaudio[6037]: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted Feb 10 21:35:39 Jandraligeli kernel: [ 103.990529] iwlagn: WARNING: Requesting MAC access during RFKILL wakes up NIC Feb 10 21:35:40 Jandraligeli kernel: [ 105.596810] iwlagn: WARNING: Requesting MAC access during RFKILL wakes up NIC Feb 10 21:35:40 Jandraligeli kernel: [ 105.597258] psmouse.c: TouchPad at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away. Feb 10 21:35:40 Jandraligeli kernel: [ 105.606983] iwlagn: WARNING: Requesting MAC access during RFKILL wakes up NIC Feb 10 21:35:40 Jandraligeli kernel: [ 105.617195] iwlagn: WARNING: Requesting MAC access during RFKILL wakes up NIC Feb 10 21:35:40 Jandraligeli kernel: [ 105.627531] iwlagn 0000:04:00.0: PCI INT A disabled Then with WLAN disabled and logged off from GNOME I tried pm-suspend from VT1: christ...@jandraligeli:~$ tail -f /var/log/messages Feb 10 21:40:46 Jandraligeli kernel: [ 44.713839] [drm] Initialized i915 1.6.0 20060119 on minor 0 Feb 10 21:40:47 Jandraligeli kernel: [ 45.749971] tg3: eth0: Link is up at 100 Mbps, full duplex. Feb 10 21:40:47 Jandraligeli kernel: [ 45.749981] tg3: eth0: Flow control is on for TX and on for RX. Feb 10 21:40:47 Jandraligeli kernel: [ 45.750304] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 10 21:40:53 Jandraligeli pulseaudio[6043]: ltdl-bind-now.c: Failed to find original dlopen loader. Feb 10 21:40:53 Jandraligeli pulseaudio[6045]: pid.c: Stale PID file, overwriting. Feb 10 21:40:53 Jandraligeli pulseaudio[6045]: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted Feb 10 21:40:53 Jandraligeli pulseaudio[6045]: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted Feb 10 21:41:23 Jandraligeli kernel: [ 82.279059] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Feb 10 21:41:32 Jandraligeli bonobo-activation-server (christian-6350): could not associate with desktop session: Failed to connect to socket /tmp/dbus-zrM9XGC639: Connection refused Feb 10 21:43:04 Jandraligeli kernel: [ 183.461583] iwlagn: Radio Frequency Kill Switch is On: Feb 10 21:43:04 Jandraligeli kernel: [ 183.461589] Kill switch must be turned off for wireless networking to work. Finally I switched to VT1 logged in there and tried pm-suspend. This said /var/log/messages while I am logged in vie ssh: christ...@jandraligeli:~$ tail -f /var/log/messages Feb 10 21:47:29 Jandraligeli kernel: [ 45.864189] [drm] Initialized i915 1.6.0 20060119 on minor 0 Feb 10 21:47:29 Jandraligeli kernel: [ 45.902028] NET: Registered protocol family 17 Feb 10 21:47:30 Jandraligeli kernel: [ 46.955850] tg3: eth0: Link is up at 100 Mbps, full duplex. Feb 10 21:47:30 Jandraligeli kernel: [ 46.955857] tg3: eth0: Flow control is on for TX and on for RX. Feb 10 21:47:30 Jandraligeli kernel: [ 46.956060] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 10 21:47:36 Jandraligeli pulseaudio[6056]: ltdl-bind-now.c: Failed to find original dlopen loader. Feb 10 21:47:36 Jandraligeli pulseaudio[6058]: pid.c: Stale PID file, overwriting. Feb 10 21:47:36 Jandraligeli pulseaudio[6058]: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted Feb 10 21:47:36 Jandraligeli pulseaudio[6058]: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted Feb 10 21:48:16 Jandraligeli kernel: [ 93.214539] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready In all these cases the notebook wakes up and cut off/crashed again and I have to boot it pressing the power button. Finally, this happens with Kernel 2.6.27-9-generic. The notebook went to sleep and woke up normally: christ...@gobuchul:~$ ssh 192.168.1.33 [email protected]'s password: Linux Jandraligeli 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686 [...] Last login: Tue Feb 10 21:53:47 2009 christ...@jandraligeli:~$ tail -f /var/log/messages Feb 10 22:00:58 Jandraligeli kernel: [ 41.480552] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Feb 10 22:00:58 Jandraligeli kernel: [ 41.480836] [drm] Initialized i915 1.6.0 20060119 on minor 0 Feb 10 22:00:59 Jandraligeli kernel: [ 42.322005] tg3: eth0: Link is up at 100 Mbps, full duplex. Feb 10 22:00:59 Jandraligeli kernel: [ 42.322016] tg3: eth0: Flow control is on for TX and on for RX. Feb 10 22:00:59 Jandraligeli kernel: [ 42.322385] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 10 22:01:06 Jandraligeli pulseaudio[6025]: ltdl-bind-now.c: Failed to find original dlopen loader. Feb 10 22:01:06 Jandraligeli pulseaudio[6027]: pid.c: Stale PID file, overwriting. Feb 10 22:01:06 Jandraligeli pulseaudio[6027]: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted Feb 10 22:01:06 Jandraligeli pulseaudio[6027]: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted Feb 10 22:01:37 Jandraligeli kernel: [ 79.726023] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Feb 10 22:02:24 Jandraligeli kernel: [ 127.302115] iwlagn 0000:04:00.0: PCI INT A disabled Feb 10 22:02:24 Jandraligeli kernel: [ 127.421332] PM: Syncing filesystems ... done. Feb 10 22:02:34 Jandraligeli kernel: [ 127.423062] Freezing user space processes ... (elapsed 0.00 seconds) done. Feb 10 22:02:34 Jandraligeli kernel: [ 127.424323] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Feb 10 22:02:34 Jandraligeli kernel: [ 127.424401] Suspending console(s) (use no_console_suspend to debug) Feb 10 22:02:34 Jandraligeli kernel: [ 127.425456] pci 0000:00:02.0: PCI INT A disabled Feb 10 22:02:34 Jandraligeli kernel: [ 127.443497] sd 0:0:0:0: [sda] Synchronizing SCSI cache Feb 10 22:02:34 Jandraligeli kernel: [ 127.686256] sd 0:0:0:0: [sda] Stopping disk Feb 10 22:02:34 Jandraligeli kernel: [ 128.724259] ata_piix 0000:00:1f.1: PCI INT A disabled Feb 10 22:02:34 Jandraligeli kernel: [ 128.724424] ehci_hcd 0000:00:1d.7: PCI INT A disabled Feb 10 22:02:34 Jandraligeli kernel: [ 128.740169] uhci_hcd 0000:00:1d.2: PCI INT C disabled Feb 10 22:02:34 Jandraligeli kernel: [ 128.740221] uhci_hcd 0000:00:1d.1: PCI INT B disabled Feb 10 22:02:34 Jandraligeli kernel: [ 128.740273] uhci_hcd 0000:00:1d.0: PCI INT A disabled Feb 10 22:02:34 Jandraligeli kernel: [ 128.772144] HDA Intel 0000:00:1b.0: PCI INT A disabled Feb 10 22:02:34 Jandraligeli kernel: [ 128.788196] ehci_hcd 0000:00:1a.7: PCI INT C disabled Feb 10 22:02:34 Jandraligeli kernel: [ 128.804167] uhci_hcd 0000:00:1a.1: PCI INT B disabled Feb 10 22:02:34 Jandraligeli kernel: [ 128.804219] uhci_hcd 0000:00:1a.0: PCI INT A disabled Feb 10 22:02:34 Jandraligeli kernel: [ 128.804373] PM: suspend devices took 1.384 seconds Feb 10 22:02:34 Jandraligeli kernel: [ 128.916075] ACPI: Preparing to enter system sleep state S3 Feb 10 22:02:34 Jandraligeli kernel: [ 129.644100] Disabling non-boot CPUs ... Feb 10 22:02:34 Jandraligeli kernel: [ 129.748041] CPU 1 is now offline Feb 10 22:02:34 Jandraligeli kernel: [ 129.748045] SMP alternatives: switching to UP code Feb 10 22:02:34 Jandraligeli kernel: [ 129.759257] CPU1 is down Feb 10 22:02:34 Jandraligeli kernel: [ 129.759392] Extended CMOS year: 2000 Feb 10 22:02:34 Jandraligeli kernel: [ 129.759392] Extended CMOS year: 2000 Feb 10 22:02:34 Jandraligeli kernel: [ 129.759392] Enabling non-boot CPUs ... Feb 10 22:02:34 Jandraligeli kernel: [ 129.759392] SMP alternatives: switching to SMP code Feb 10 22:02:34 Jandraligeli kernel: [ 129.771020] Booting processor 1/1 ip 6000 Feb 10 22:02:34 Jandraligeli kernel: [ 129.648276] Initializing CPU#1 Feb 10 22:02:34 Jandraligeli kernel: [ 129.648276] Calibrating delay using timer specific routine.. 3325.04 BogoMIPS (lpj=6650083) Feb 10 22:02:34 Jandraligeli kernel: [ 129.648276] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 10 22:02:34 Jandraligeli kernel: [ 129.648276] CPU: L2 cache: 2048K Feb 10 22:02:34 Jandraligeli kernel: [ 129.648276] CPU: Physical Processor ID: 0 Feb 10 22:02:34 Jandraligeli kernel: [ 129.648276] CPU: Processor Core ID: 1 Feb 10 22:02:34 Jandraligeli kernel: [ 129.860491] CPU1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d Feb 10 22:02:34 Jandraligeli kernel: [ 129.868544] CPU1 is up Feb 10 22:02:34 Jandraligeli kernel: [ 129.868547] ACPI: Waking up from system sleep state S3 Feb 10 22:02:34 Jandraligeli kernel: [ 131.544899] ACPI: EC: non-query interrupt received, switching to interrupt mode Feb 10 22:02:34 Jandraligeli kernel: [ 131.780489] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Feb 10 22:02:34 Jandraligeli kernel: [ 131.780556] usb usb1: root hub lost power or was reset Feb 10 22:02:34 Jandraligeli kernel: [ 131.780578] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Feb 10 22:02:34 Jandraligeli kernel: [ 131.780639] usb usb2: root hub lost power or was reset Feb 10 22:02:34 Jandraligeli kernel: [ 131.796119] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 Feb 10 22:02:34 Jandraligeli kernel: [ 131.812204] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Feb 10 22:02:34 Jandraligeli kernel: [ 131.812611] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Feb 10 22:02:34 Jandraligeli kernel: [ 131.812673] usb usb4: root hub lost power or was reset Feb 10 22:02:34 Jandraligeli kernel: [ 131.812693] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Feb 10 22:02:34 Jandraligeli kernel: [ 131.812756] usb usb5: root hub lost power or was reset Feb 10 22:02:34 Jandraligeli kernel: [ 131.812776] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Feb 10 22:02:34 Jandraligeli kernel: [ 131.812839] usb usb6: root hub lost power or was reset Feb 10 22:02:34 Jandraligeli kernel: [ 131.828114] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Feb 10 22:02:34 Jandraligeli kernel: [ 131.828405] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Feb 10 22:02:34 Jandraligeli kernel: [ 131.996083] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out Feb 10 22:02:34 Jandraligeli kernel: [ 131.996086] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out Feb 10 22:02:34 Jandraligeli kernel: [ 132.012479] ata4.00: configured for UDMA/33 Feb 10 22:02:34 Jandraligeli kernel: [ 132.164149] ata3: SATA link down (SStatus 0 SControl 300) Feb 10 22:02:34 Jandraligeli kernel: [ 132.164176] ata2: SATA link down (SStatus 0 SControl 300) Feb 10 22:02:34 Jandraligeli kernel: [ 132.172119] usb 3-1: reset high speed USB device using ehci_hcd and address 2 Feb 10 22:02:34 Jandraligeli kernel: [ 132.424118] usb 3-3: reset high speed USB device using ehci_hcd and address 3 Feb 10 22:02:34 Jandraligeli kernel: [ 132.992750] sd 0:0:0:0: [sda] Starting disk Feb 10 22:02:34 Jandraligeli kernel: [ 133.116129] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 10 22:02:34 Jandraligeli kernel: [ 133.117157] ata1.00: _GTF unexpected object type 0x1 Feb 10 22:02:34 Jandraligeli kernel: [ 133.143985] ata1.00: _GTF unexpected object type 0x1 Feb 10 22:02:34 Jandraligeli kernel: [ 133.144162] ata1.00: configured for UDMA/133 Feb 10 22:02:34 Jandraligeli kernel: [ 133.160143] ata1: hard resetting link Feb 10 22:02:34 Jandraligeli kernel: [ 133.884131] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 10 22:02:34 Jandraligeli kernel: [ 133.884896] ata1.00: _GTF unexpected object type 0x1 Feb 10 22:02:34 Jandraligeli kernel: [ 133.933387] ata1.00: _GTF unexpected object type 0x1 Feb 10 22:02:34 Jandraligeli kernel: [ 133.933565] ata1.00: configured for UDMA/133 Feb 10 22:02:34 Jandraligeli kernel: [ 133.933570] ata1: EH complete Feb 10 22:02:34 Jandraligeli kernel: [ 133.933656] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) Feb 10 22:02:34 Jandraligeli kernel: [ 133.933694] sd 0:0:0:0: [sda] Write Protect is off Feb 10 22:02:34 Jandraligeli kernel: [ 133.933763] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 10 22:02:34 Jandraligeli kernel: [ 133.933827] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) Feb 10 22:02:34 Jandraligeli kernel: [ 133.933862] sd 0:0:0:0: [sda] Write Protect is off Feb 10 22:02:34 Jandraligeli kernel: [ 133.933930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 10 22:02:34 Jandraligeli kernel: [ 133.972149] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Feb 10 22:02:34 Jandraligeli kernel: [ 133.973892] PM: resume devices took 2.932 seconds Feb 10 22:02:34 Jandraligeli kernel: [ 133.974021] Restarting tasks ... done. Feb 10 22:02:36 Jandraligeli kernel: [ 135.705847] ADDRCONF(NETDEV_UP): eth0: link is not ready Feb 10 22:02:36 Jandraligeli kernel: [ 135.708549] iwlagn 0000:04:00.0: enabling device (0000 -> 0002) Feb 10 22:02:36 Jandraligeli kernel: [ 135.708565] iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Feb 10 22:02:36 Jandraligeli kernel: [ 135.917273] Registered led device: iwl-phy0:radio Feb 10 22:02:36 Jandraligeli kernel: [ 135.926378] Registered led device: iwl-phy0:assoc Feb 10 22:02:36 Jandraligeli kernel: [ 135.927319] Registered led device: iwl-phy0:RX Feb 10 22:02:36 Jandraligeli kernel: [ 135.928267] Registered led device: iwl-phy0:TX Feb 10 22:02:36 Jandraligeli kernel: [ 135.972493] ADDRCONF(NETDEV_UP): wlan0: link is not ready Feb 10 22:02:37 Jandraligeli kernel: [ 137.358595] tg3: eth0: Link is up at 100 Mbps, full duplex. Feb 10 22:02:37 Jandraligeli kernel: [ 137.358608] tg3: eth0: Flow control is on for TX and on for RX. Feb 10 22:02:37 Jandraligeli kernel: [ 137.358969] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready I hope, this will help you. -- Notebook crashes after suspend with new Kernel 2.6.27-11-generic https://bugs.launchpad.net/bugs/322886 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
