/lib/partman/recipes.sh: line 31: local: `-': not a valid identifier
Henrik, this is actually just a harmless difference between shell
implementations; you can ignore it. The real problem is:
Nov 14 04:17:18 ubuntu kernel: [17180526.744000] hdg: dma_timer_expiry: dma
status == 0x25
Nov 14 04:17:28 ubuntu kernel: [17180536.744000] hdg: DMA interrupt recovery
Nov 14 04:17:28 ubuntu kernel: [17180536.744000] hdg: lost interrupt
Nov 14 04:17:28 ubuntu kernel: [17180536.744000] attempt to access beyond end
of device
Nov 14 04:17:28 ubuntu kernel: [17180536.744000] hdg3: rw=1, want=4073509578,
limit=3727080
Nov 14 04:17:28 ubuntu kernel: [17180536.836000] attempt to access beyond end
of device
Nov 14 04:17:28 ubuntu kernel: [17180536.836000] hdg3: rw=1, want=2830417410,
limit=3727080
Nov 14 04:17:30 ubuntu kernel: [17180538.860000] Aborting journal on device
hdg3.
Nov 14 04:17:31 ubuntu kernel: [17180539.484000] ext3_abort called.
Nov 14 04:17:31 ubuntu kernel: [17180539.484000] EXT3-fs error (device hdg3):
ext3_journal_start_sb: Detected aborted journal
Nov 14 04:17:31 ubuntu kernel: [17180539.484000] Remounting filesystem read-only
... i.e. your disk drive starts to return errors at some point during
the installation. More recent versions of the installer (Ubuntu 6.10 and
later) will respond to this with a message along the following lines:
"This particular error is often due to a faulty hard disk. It may help
to check whether the hard disk is old and in need of replacement, or to
move the system to a cooler environment."
** Changed in: ubiquity (Ubuntu)
Status: Confirmed => Rejected
--
I was attempting to install the program on a hard drive which is attached to
the MoBo via a HighPoint Rocket 133SB IDE controller card. It showed up as /hdg
https://launchpad.net/bugs/71728
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
