The default network is set to be autostarted but the start fails. The
libvirt-bin package tries to install a NAT network, is it desirable
considering the fact that many users will use a physical shared device
in a bridged configuration and will have to deconfigure this default
network?
The default network should be installed with 'autostart' disabled, and
left in tha package as an example.
~$ sudo virsh net-list --all
Connecting to uri: qemu:///system
Name State Autostart
-----------------------------------------
default inactive no
~$ sudo virsh net-start default
Connecting to uri: qemu:///system
error: Failed to start network default
error: internal error 'brctl setfd virbr%d 0' exited with non-zero status 1 and
signal 0: set forward delay failed: No such device
~$ sudo virsh net-start default
j...@j:~$ sudo virsh net-start default
~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
[ ... ]
7: virbr0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether e6:84:07:b8:86:ae brd ff:ff:ff:ff:ff:ff
8: virbr1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 0e:ce:30:f3:d8:fa brd ff:ff:ff:ff:ff:ff
9: virbr2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether ae:d0:f3:36:d8:34 brd ff:ff:ff:ff:ff:ff
--
libvirt fails work if virbr0 exists when it is started
https://bugs.launchpad.net/bugs/185598
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
