Hi, thank you for your help. I think there're no logs were written to these files after resuming after suspend. Before doing hibernate and suspend i did cleared my logs. Then I did hibernate, and then suspend. After hibernate my pc was turned off, then when i powered it up, it was booting, i saw splash, and then splash disappered and nothing more. CTRL+ALT+DEL doesn't reboots my pc. I only can power off it by pressing power button for about 5 secs. Then i did suspend. It gone to sleep, sleeping led was blanking. When i turn it on, it doesn't resume at all. And, by the way after suspend my laptop doesn't boot at all, even if i power off it and then power on. No picture on the screen, even no bios posts. To boot it i have to take off a battery and power cable, then plug it back, and then it boots normally. Sorry for bad english :) -------------------- acpid [Wed Jan 3 22:46:14 2007] starting up [Wed Jan 3 22:46:14 2007] 56 rules loaded [Wed Jan 3 22:46:16 2007] client connected from 4088[0:0] [Wed Jan 3 22:46:16 2007] 1 client rule loaded [Wed Jan 3 22:46:38 2007] client connected from 4403[0:0] [Wed Jan 3 22:46:38 2007] 1 client rule loaded [Wed Jan 3 22:46:45 2007] client connected from 4442[108:108] [Wed Jan 3 22:46:45 2007] 1 client rule loaded [Wed Jan 3 23:04:14 2007] received event "button/lid LID 00000080 00000001" [Wed Jan 3 23:04:14 2007] notifying client 4088[0:0] [Wed Jan 3 23:04:14 2007] notifying client 4403[0:0] [Wed Jan 3 23:04:14 2007] notifying client 4442[108:108] [Wed Jan 3 23:04:14 2007] executing action "/etc/acpi/lid.sh" [Wed Jan 3 23:04:14 2007] BEGIN HANDLER MESSAGES ERROR: Couldn't attach to DCOP server! [Wed Jan 3 23:04:15 2007] END HANDLER MESSAGES [Wed Jan 3 23:04:15 2007] action exited with status 1 [Wed Jan 3 23:04:15 2007] executing action "/etc/acpi/fglrx-powermode.sh" [Wed Jan 3 23:04:15 2007] BEGIN HANDLER MESSAGES fglrx: setting low power [Wed Jan 3 23:04:15 2007] END HANDLER MESSAGES [Wed Jan 3 23:04:15 2007] action exited with status 0 [Wed Jan 3 23:04:15 2007] completed event "button/lid LID 00000080 00000001" [Wed Jan 3 23:08:09 2007] starting up [Wed Jan 3 23:08:09 2007] 56 rules loaded [Wed Jan 3 23:08:10 2007] client connected from 4005[0:0] [Wed Jan 3 23:08:10 2007] 1 client rule loaded [Wed Jan 3 23:08:20 2007] received event "battery BAT0 00000001 00000001" [Wed Jan 3 23:08:20 2007] notifying client 4005[0:0] [Wed Jan 3 23:08:20 2007] executing action "/etc/acpi/power.sh" [Wed Jan 3 23:08:20 2007] BEGIN HANDLER MESSAGES [Wed Jan 3 23:08:20 2007] END HANDLER MESSAGES [Wed Jan 3 23:08:20 2007] action exited with status 0 [Wed Jan 3 23:08:20 2007] completed event "battery BAT0 00000001 00000001" [Wed Jan 3 23:08:20 2007] received event "battery BAT0 00000080 00000001" [Wed Jan 3 23:08:20 2007] notifying client 4005[0:0] [Wed Jan 3 23:08:20 2007] executing action "/etc/acpi/power.sh" [Wed Jan 3 23:08:20 2007] BEGIN HANDLER MESSAGES [Wed Jan 3 23:08:21 2007] END HANDLER MESSAGES [Wed Jan 3 23:08:21 2007] action exited with status 0 [Wed Jan 3 23:08:21 2007] completed event "battery BAT0 00000080 00000001" [Wed Jan 3 23:08:30 2007] client connected from 4326[0:0] [Wed Jan 3 23:08:30 2007] 1 client rule loaded [Wed Jan 3 23:08:37 2007] client connected from 4402[108:108] [Wed Jan 3 23:08:37 2007] 1 client rule loaded
----------------- dmesg [17179569.184000] Linux version 2.6.17-10-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic) [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000004ffd0000 (usable) [17179569.184000] BIOS-e820: 000000004ffd0000 - 000000004ffdf000 (ACPI data) [17179569.184000] BIOS-e820: 000000004ffdf000 - 0000000050000000 (ACPI NVS) [17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [17179569.184000] 383MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] found SMP MP-table at 000ff780 [17179569.184000] On node 0 totalpages: 327632 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 98256 pages, LIFO batch:31 [17179569.184000] DMI 2.3 present. [17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f7090 [17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x01000521 MSFT 0x00000097) @ 0x4ffd0000 [17179569.184000] ACPI: FADT (v002 A M I OEMFACP 0x01000521 MSFT 0x00000097) @ 0x4ffd0200 [17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x01000521 MSFT 0x00000097) @ 0x4ffd0390 [17179569.184000] ACPI: OEMB (v001 A M I AMI_OEM 0x01000521 MSFT 0x00000097) @ 0x4ffdf040 [17179569.184000] ACPI: DSDT (v001 258KA 258KA000 0x00000000 INTL 0x02002026) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x808 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [17179569.184000] Processor #0 15:4 APIC version 16 [17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] ACPI: IRQ10 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 60000000 (gap: 50000000:aff80000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=UUID=54c0c515-9e1a-4157-b9f4-40f287ef1b0c ro quiet splash vga=792 rootflags=data=writeback acpi_sleep=s3_bios,s3_mode [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Enabling fast FPU save and restore... done. [17179569.184000] Enabling unmasked SIMD FPU exception support... done. [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes) [17179569.184000] Detected 798.340 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour dummy device 80x25 [17179572.996000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179572.996000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179573.060000] Memory: 1287800k/1310528k available (1910k kernel code, 21484k reserved, 1070k data, 308k init, 393024k highmem) [17179573.060000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179573.140000] Calibrating delay using timer specific routine.. 1597.90 BogoMIPS (lpj=3195805) [17179573.140000] Security Framework v1.0.0 initialized [17179573.140000] SELinux: Disabled at boot. [17179573.140000] Mount-cache hash table entries: 512 [17179573.140000] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 [17179573.140000] CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 [17179573.140000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17179573.140000] CPU: L2 Cache: 1024K (64 bytes/line) [17179573.140000] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000 [17179573.140000] Checking 'hlt' instruction... OK. [17179573.156000] SMP alternatives: switching to UP code [17179573.156000] Freeing SMP alternatives: 16k freed [17179573.156000] checking if image is initramfs... it is [17179574.500000] Freeing initrd memory: 6663k freed [17179574.500000] ACPI: Core revision 20060707 [17179574.500000] ACPI: Looking for DSDT ... not found! [17179574.504000] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 08 [17179574.504000] Total of 1 processors activated (1597.90 BogoMIPS). [17179574.504000] ENABLING IO-APIC IRQs [17179574.504000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179574.648000] Brought up 1 CPUs [17179574.648000] migration_cost=0 [17179574.648000] NET: Registered protocol family 16 [17179574.648000] EISA bus registered [17179574.648000] ACPI: bus type pci registered [17179574.648000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 [17179574.648000] PCI: Using configuration type 1 [17179574.648000] Setting up standard PCI resources [17179574.664000] ACPI: Interpreter enabled [17179574.664000] ACPI: Using IOAPIC for interrupt routing [17179574.668000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179574.668000] PCI: Probing PCI hardware (bus 00) [17179574.676000] Uncovering SIS963 that hid as a SIS503 (compatible=0) [17179574.676000] Enabling SiS 96x SMBus. [17179574.676000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 [17179574.676000] Boot video device is 0000:01:00.0 [17179574.676000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179574.748000] ACPI: Embedded Controller [EC0] (gpe 11) interrupt mode. [17179574.768000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) [17179574.768000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15) [17179574.768000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) [17179574.768000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) [17179574.768000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 7 10 11 12 14 15) [17179574.768000] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15) [17179574.768000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [17179574.768000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15) [17179574.772000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179574.772000] pnp: PnP ACPI init [17179574.772000] pnp: PnP ACPI: found 10 devices [17179574.772000] PnPBIOS: Disabled by ACPI PNP [17179574.772000] PCI: Using ACPI for IRQ routing [17179574.772000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179574.780000] PCI: Bridge: 0000:00:01.0 [17179574.780000] IO window: c000-cfff [17179574.780000] MEM window: dfe00000-dfefffff [17179574.780000] PREFETCH window: cfd00000-dfcfffff [17179574.780000] PCI: Bus 2, cardbus bridge: 0000:00:09.0 [17179574.780000] IO window: 00001000-000010ff [17179574.780000] IO window: 00001400-000014ff [17179574.780000] PREFETCH window: 60000000-61ffffff [17179574.780000] MEM window: 62000000-63ffffff [17179574.780000] PCI: Bus 6, cardbus bridge: 0000:00:09.1 [17179574.780000] IO window: 00001800-000018ff [17179574.780000] IO window: 00001c00-00001cff [17179574.780000] PREFETCH window: 64000000-65ffffff [17179574.780000] MEM window: 66000000-67ffffff [17179574.780000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 169 [17179574.780000] ACPI: PCI Interrupt 0000:00:09.1[A] -> GSI 17 (level, low) -> IRQ 169 [17179574.780000] NET: Registered protocol family 2 [17179574.812000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [17179574.812000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [17179574.816000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [17179574.816000] TCP: Hash tables configured (established 262144 bind 65536) [17179574.816000] TCP reno registered [17179574.816000] audit: initializing netlink socket (disabled) [17179574.816000] audit(1167865658.816:1): initialized [17179574.816000] highmem bounce pool size: 64 pages [17179574.816000] VFS: Disk quotas dquot_6.5.1 [17179574.816000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179574.816000] Initializing Cryptographic API [17179574.816000] io scheduler noop registered [17179574.816000] io scheduler anticipatory registered [17179574.816000] io scheduler deadline registered [17179574.816000] io scheduler cfq registered (default) [17179574.844000] isapnp: Scanning for PnP cards... [17179575.196000] isapnp: No Plug & Play device found [17179575.232000] Real Time Clock Driver v1.12ac [17179575.232000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [17179575.236000] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177 [17179575.236000] ACPI: PCI interrupt for device 0000:00:02.6 disabled [17179575.236000] mice: PS/2 mouse device common for all mice [17179575.236000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179575.236000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179575.236000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179575.236000] PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179575.240000] i8042.c: Detected active multiplexing controller, rev 1.0. [17179575.240000] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [17179575.244000] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [17179575.244000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [17179575.244000] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [17179575.244000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179575.244000] EISA: Probing bus 0 at eisa.0 [17179575.244000] Cannot allocate resource for EISA slot 1 [17179575.244000] EISA: Detected 0 cards. [17179575.244000] TCP bic registered [17179575.244000] NET: Registered protocol family 1 [17179575.244000] NET: Registered protocol family 8 [17179575.244000] NET: Registered protocol family 20 [17179575.244000] Using IPI No-Shortcut mode [17179575.244000] ACPI: (supports S0 S1 S3 S4 S5) [17179575.244000] Freeing unused kernel memory: 308k freed [17179575.356000] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 4608k, total 131072k [17179575.356000] vesafb: mode is 1024x768x24, linelength=3072, pages=55 [17179575.356000] vesafb: protected mode interface info at c000:55fd [17179575.356000] vesafb: scrolling: redraw [17179575.356000] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [17179575.428000] Console: switching to colour frame buffer device 128x48 [17179575.428000] fb0: VESA VGA frame buffer device [17179575.648000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179576.568000] Capability LSM initialized [17179576.640000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [17179576.640000] ACPI: Thermal Zone [THRM] (75 C) [17179577.548000] SIS5513: IDE controller at PCI slot 0000:00:02.5 [17179577.548000] SIS5513: chipset revision 0 [17179577.548000] SIS5513: not 100% native mode: will probe irqs later [17179577.548000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller [17179577.548000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA [17179577.548000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA [17179577.548000] Probing IDE interface ide0... [17179577.840000] hda: FUJITSU MHT2060AH, ATA DISK drive [17179578.512000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179578.512000] Probing IDE interface ide1... [17179579.252000] hdc: PIONEER DVD-RW DVR-K16, ATAPI CD/DVD-ROM drive [17179579.924000] ide1 at 0x170-0x177,0x376 on irq 15 [17179579.936000] hda: max request size: 128KiB [17179579.964000] hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33) [17179579.964000] hda: cache flushes supported [17179579.964000] hda: hda1 hda2 < hda5 hda6 hda7 > hda3 [17179580.064000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(33) [17179580.064000] Uniform CD-ROM driver Revision: 3.20 [17179580.792000] usbcore: registered new driver usbfs [17179580.796000] usbcore: registered new driver hub [17179580.800000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 185 [17179580.800000] ehci_hcd 0000:00:03.3: EHCI Host Controller [17179580.800000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [17179580.800000] PCI: cache line size of 64 is not supported by device 0000:00:03.3 [17179580.800000] ehci_hcd 0000:00:03.3: irq 185, io mem 0xdffff000 [17179580.800000] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179580.824000] usb usb1: configuration #1 chosen from 1 choice [17179580.824000] hub 1-0:1.0: USB hub found [17179580.824000] hub 1-0:1.0: 6 ports detected [17179580.848000] ieee1394: Initialized config rom entry `ip1394' [17179580.948000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 193 [17179581.004000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [17179581.040000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193] MMIO=[dfffb800-dfffbfff] Max Packet=[2048] IR/IT contexts=[4/8] [17179581.040000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 201 [17179581.040000] ohci_hcd 0000:00:03.0: OHCI Host Controller [17179581.040000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [17179581.068000] ohci_hcd 0000:00:03.0: irq 201, io mem 0xdfffd000 [17179581.124000] usb usb2: configuration #1 chosen from 1 choice [17179581.124000] hub 2-0:1.0: USB hub found [17179581.124000] hub 2-0:1.0: 3 ports detected [17179581.228000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 209 [17179581.228000] ohci_hcd 0000:00:03.1: OHCI Host Controller [17179581.228000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [17179581.244000] ohci_hcd 0000:00:03.1: irq 209, io mem 0xdfffe000 [17179581.300000] usb usb3: configuration #1 chosen from 1 choice [17179581.300000] hub 3-0:1.0: USB hub found [17179581.300000] hub 3-0:1.0: 3 ports detected [17179581.500000] Attempting manual resume [17179581.516000] EXT3-fs: INFO: recovery required on readonly filesystem. [17179581.516000] EXT3-fs: write access will be enabled during recovery. [17179581.532000] usb 2-2: new low speed USB device using ohci_hcd and address 2 [17179581.744000] usb 2-2: configuration #1 chosen from 1 choice [17179581.768000] usbcore: registered new driver hiddev [17179581.776000] input: Cypress Semi. Cypress Ultra Mouse as /class/input/input1 [17179581.776000] input: USB HID v1.10 Mouse [Cypress Semi. Cypress Ultra Mouse] on usb-0000:00:03.0-2 [17179581.776000] usbcore: registered new driver usbhid [17179581.776000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [17179582.312000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d532581d062] [17179583.296000] kjournald starting. Commit interval 5 seconds [17179583.296000] EXT3-fs: hda3: orphan cleanup on readonly fs [17179583.296000] ext3_orphan_cleanup: deleting unreferenced inode 463344 [17179583.296000] ext3_orphan_cleanup: deleting unreferenced inode 463343 [17179583.296000] ext3_orphan_cleanup: deleting unreferenced inode 463373 [17179583.296000] EXT3-fs: hda3: 3 orphan inodes deleted [17179583.296000] EXT3-fs: recovery complete. [17179583.316000] EXT3-fs: mounted filesystem with writeback data mode. [17179594.180000] ieee80211_crypt: registered algorithm 'NULL' [17179594.184000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [17179594.184000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> [17179595.112000] input: PC Speaker as /class/input/input2 [17179595.224000] Linux agpgart interface v0.101 (c) Dave Jones [17179595.668000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 169 [17179595.668000] Yenta: CardBus bridge found at 0000:00:09.0 [1584:3005] [17179595.668000] Yenta O2: res at 0x94/0xD4: 00/ea [17179595.668000] Yenta O2: enabling read prefetch/write burst [17179595.708000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008 [17179595.752000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [17179595.868000] Yenta: ISA IRQ mask 0x0ab8, PCI irq 169 [17179595.868000] Socket status: 30000006 [17179595.896000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq [17179595.896000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [17179595.896000] Driver 'ipw2200' needs updating - please use bus_type methods [17179595.940000] sis900.c: v1.08.09 Sep. 19 2005 [17179596.080000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179596.276000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [17179596.276000] ACPI: PCI Interrupt 0000:00:09.1[A] -> GSI 17 (level, low) -> IRQ 169 [17179596.276000] Yenta: CardBus bridge found at 0000:00:09.1 [1584:3005] [17179596.404000] Yenta: ISA IRQ mask 0x0ab8, PCI irq 169 [17179596.404000] Socket status: 30000006 [17179596.416000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 193 [17179596.424000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [17179596.588000] ts: Compaq touchscreen protocol output [17179597.572000] cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f [17179597.572000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7 [17179597.572000] cs: IO port probe 0x820-0x8ff: excluding 0x828-0x837 0x840-0x84f 0x858-0x89f [17179597.572000] cs: IO port probe 0xc00-0xcf7: clean. [17179597.576000] cs: IO port probe 0xa00-0xaff: clean. [17179597.576000] cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f [17179597.576000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7 [17179597.580000] cs: IO port probe 0x820-0x8ff: excluding 0x828-0x837 0x840-0x84f 0x858-0x89f [17179597.580000] cs: IO port probe 0xc00-0xcf7: clean. [17179597.580000] cs: IO port probe 0xa00-0xaff: clean. [17179597.772000] ipw2200: Radio Frequency Kill Switch is On: [17179597.772000] Kill switch must be turned off for wireless networking to work. [17179597.772000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [17179597.772000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 193 [17179597.772000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [17179597.784000] 0000:00:04.0: Using transceiver found at address 1 as default [17179597.784000] eth1: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 193, 00:03:0d:1a:e7:a3. [17179597.784000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179597.784000] agpgart: Unsupported SiS chipset (device id: 0755) [17179597.828000] agpgart: Detected AGP bridge 0 [17179597.836000] agpgart: AGP aperture is 128M @ 0xe0000000 [17179597.864000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177 [17179598.688000] intel8x0_measure_ac97_clock: measured 55461 usecs [17179598.688000] intel8x0: clocking to 48000 [17179599.608000] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] [17179599.736000] parport0: irq 7 detected [17179599.832000] lp0: using parport0 (polling). [17179599.932000] SCSI subsystem initialized [17179599.948000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179599.948000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179600.036000] fuse init (API version 7.6) [17179600.348000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2) [17179600.348000] ACPI: Invalid package argument [17179600.348000] ACPI Exception (acpi_processor-0275): AE_BAD_PARAMETER, Invalid _PSS data [20060707] [17179600.352000] powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x12 (1100 mV) [17179600.352000] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6 (1400 mV) [17179600.352000] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x2 (1500 mV) [17179600.352000] cpu_init done, current fid 0x0, vid 0x12 [17179600.576000] Adding 313232k swap on /dev/hda7. Priority:-1 extents:1 across:313232k [17179600.852000] EXT3 FS on hda3, internal journal [17179601.264000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [17179602.428000] NET: Registered protocol family 17 [17179604.740000] CSLIP: code copyright 1989 Regents of the University of California [17179604.748000] PPP generic driver version 2.4.2 [17179604.844000] NET: Registered protocol family 10 [17179604.844000] lo: Disabled Privacy Extensions [17179604.844000] ADDRCONF(NETDEV_UP): eth1: link is not ready [17179604.844000] IPv6 over IPv4 tunneling driver [17179606.960000] Bluetooth: Core ver 2.8 [17179606.960000] NET: Registered protocol family 31 [17179606.960000] Bluetooth: HCI device and connection manager initialized [17179606.960000] Bluetooth: HCI socket layer initialized [17179607.004000] Bluetooth: L2CAP ver 2.8 [17179607.004000] Bluetooth: L2CAP socket layer initialized [17179607.128000] Bluetooth: RFCOMM socket layer initialized [17179607.128000] Bluetooth: RFCOMM TTY layer initialized [17179607.128000] Bluetooth: RFCOMM ver 1.7 ----------------------- boot Jan 4 02:07:50 rcS: Setting preliminary keymap.... Jan 4 02:07:53 rcS: Preparing restricted drivers.... Jan 4 02:07:54 rcS: Starting basic networking.... Jan 4 02:07:54 rcS: Starting kernel event manager.... Jan 3 23:07:59 rcS: Loading hardware drivers.... Jan 3 23:07:59 rcS: Starting kernel log.... Jan 3 23:08:00 rcS: Loading manual drivers.... Jan 3 23:08:02 rcS: Mounting local filesystems...done. Jan 3 23:08:02 rcS: Activating swapfile swap...done. Jan 3 23:08:04 rcS: Starting DHCP server: dhcpd3. Jan 3 23:08:05 rcS: Configuring network interfaces...done. Jan 3 23:08:05 rcS: Starting portmap daemon.... Jan 3 23:08:06 rcS: Loading the saved-state of the serial devices... Jan 3 23:08:07 rcS: Setting up console keymap.... Jan 3 23:08:07 rcS: Starting Bluetooth services: hcid sdpd sdp_options. Jan 3 23:08:08 rcS: Starting periodic command scheduler.... Jan 3 23:08:08 rcS: Checking battery state.... Jan 3 23:08:09 rc2: Loading ACPI modules.... Jan 3 23:08:09 rc2: Starting ACPI services.... Jan 3 23:08:09 rc2: Starting K Display Manager: kdm. Jan 3 23:08:19 rc2: Starting domain name service...:. Jan 3 23:08:21 rc2: Starting HP Linux Printing and Imaging System: hpiod hpssd. Jan 3 23:08:22 rc2: Starting Common Unix Printing System: cupsd. Jan 3 23:08:28 rc2: Starting MySQL database server: mysqld . . .. Jan 3 23:08:28 rc2: Checking for corrupt, not cleanly closed and upgrade needing tables.. Jan 3 23:08:30 rc2: Starting apt index watcher: apt-index-watcher. Jan 3 23:08:30 rc2: Starting atieventsd: done. Jan 3 23:08:32 rc2: Starting system message bus: dbus. Jan 3 23:08:43 rc2: Starting Hardware abstraction layer: hald. Jan 3 23:08:43 rc2: Starting DBUS aware dhcp client: dhcdbd. Jan 3 23:08:45 rc2: Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. Jan 3 23:08:46 rc2: Starting System Tools Backends: system-tools-backends. Jan 3 23:08:46 rc2: Starting gnump3d: gnump3d. Jan 3 23:08:49 rc2: Exporting directories for NFS kernel daemon.... Jan 3 23:08:49 rc2: Starting NFS kernel daemon: nfsd mountd. Jan 3 23:08:49 rc2: Starting powernowd... . Jan 3 23:08:52 rc2: Starting Samba daemons...:. Jan 3 23:08:53 rc2: Setting sysfs variables...done. Jan 3 23:08:53 rc2: Starting NFS common utilities: statd. Jan 3 23:08:55 rc2: Starting DHCP server: dhcpd3. Jan 3 23:08:56 rc2: Starting anac(h)ronistic cron: anacron. Jan 3 23:08:56 rc2: Starting Bluetooth services: hcid sdpd sdp_options. Jan 3 23:08:57 rc2: Setting disc parameters.... Jan 3 23:08:57 rc2: Starting NTP server.... Jan 3 23:08:59 rc2: Enabling additional executable binary formats: binfmt-support. Jan 3 23:09:02 rc2: Starting apache 2.0 web server.... Jan 3 23:09:05 rc2: Starting DHCP server: dhcpd3. Jan 3 23:09:05 rc2: Daemon already running on PID 4448 Jan 3 23:09:05 rc2: Running local boot scripts (/etc/rc.local). -- Uniwill 258KA doesn't resume after suspend/hibernation https://launchpad.net/bugs/72417 -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
