Public bug reported:
Binary package hint: acpi-support
I have a AMD2 computer with a M3N78 Mainboard.
Running Kernel 2.6.17 on UBUNTU 8.10
The IDE Interface is a GeForce 8200 running in SATA mode.
Attached is a 1GIG sata disk
After resuming from S3 sleep the system isn't able to access the drive.
I get I/O errors an have to restart. According to the noise the board
re-enables the drives correctly.
I tried to disable DMA in /etc/default/acpi-support and I switched into AHCI
mode via BIOS-Settings.
btw: S3 sleep and resume on windows works
Lsmod:
--------------
00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1)
HWinfo --disk
--------------
32: IDE 00.0: 10600 Disk
[Created at block.234]
UDI:
/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD10EACS_65D6B0_WD_WCAU41771461
Unique ID: 3OOL.GRWJc_NePi6
Parent ID: WL76.yE7770eiVn1
SysFS ID: /class/block/sda
SysFS BusID: 0:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:09.0/host0/target0:0:0/0:0:0:0
Hardware Class: disk
Model: "WDC WD10EACS-65D"
Vendor: "WDC"
Device: "WD10EACS-65D"
Revision: "01.0"
Serial ID: "WD-WCAU41771461"
Driver: "ahci", "sd"
Driver Modules: "ahci"
Device File: /dev/sda
Device Files: /dev/sda,
/dev/disk/by-id/scsi-1ATA_WDC_WD10EACS-65D6B0_WD-WCAU41771461,
/dev/disk/by-id/ata-WDC_WD10EACS-65D6B0_WD-WCAU41771461,
/dev/disk/by-path/pci-0000:00:09.0-scsi-0:0:0:0, /dev/block/8:0
Device Number: block 8:0-8:15
BIOS id: 0x81
Geometry (Logical): CHS 121601/255/63
Size: 1953525168 sectors a 512 bytes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (IDE interface)
Any suggestions?
** Affects: acpi-support (Ubuntu)
Importance: Undecided
Status: New
--
sata drive error after resume from sleep
https://bugs.launchpad.net/bugs/354462
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
