Martin, The Acer TravelMate 4500 no longer works. I purchased a new laptop and I am running 8.04 with everything working fine. I can no longer be a test for this bug. Sorry.
Don On Tue, Apr 14, 2009 at 1:32 PM, Martin Kossick < [email protected]> wrote: > Could you test with 9.04? > Jaunty will be released next week. > > -- > Smart Battery not working in Hardy Heron > https://bugs.launchpad.net/bugs/234653 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “linux” source package in Ubuntu: Incomplete > > Bug description: > I am using an Acer TravelMate 4500 which has a SmartBattery. The Smart > Battery was not working in Dapper, but was working very nicely in Fiesty. > However, it seems to be broken again in Hardy. It seems to think I have > two batteries and battery 2 is working. In fact, I have one battery which > is battery 1. Here is the output of 'dmesg | grep acpi': > > [ 0.000000] BIOS-e820: 000000001eee0000 - 000000001eeec000 (ACPI data) > [ 0.000000] BIOS-e820: 000000001eeec000 - 000000001ef00000 (ACPI NVS) > [ 0.000000] ACPI: RSDP signature @ 0xC00F62E0 checksum 0 > [ 0.000000] ACPI: RSDP 000F62E0, 0014 (r0 ACER ) > [ 0.000000] ACPI: RSDT 1EEE66D8, 0030 (r1 ACER Kestrel 20020806 LTP > 0) > [ 0.000000] ACPI: FACP 1EEEBF2C, 0074 (r1 ACER Kestrel 20020806 PTL > 50) > [ 0.000000] ACPI: DSDT 1EEE6708, 5824 (r1 ACER Kestrel 20020806 MSFT > 100000E) > [ 0.000000] ACPI: FACS 1EEFCFC0, 0040 > [ 0.000000] ACPI: HPET 1EEEBFA0, 0038 (r1 ACER Kestrel 20020806 PTL > 0) > [ 0.000000] ACPI: BOOT 1EEEBFD8, 0028 (r1 ACER Kestrel 20020806 LTP > 1) > [ 0.000000] ACPI: DMI detected: Acer > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid > [ 7.680819] ACPI: Core revision 20070126 > [ 7.680891] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml > not found. > [ 7.682998] ACPI: setting ELCR to 0200 (from 0440) > [ 7.700317] ACPI: bus type pci registered > [ 7.718228] ACPI: EC: Look up EC in DSDT > [ 7.721140] ACPI: Interpreter enabled > [ 7.721144] ACPI: (supports S0 S3 S4 S5) > [ 7.721155] ACPI: Using PIC for interrupt routing > [ 7.721415] ACPI: EC: non-query interrupt received, switching to > interrupt mode > [ 7.742459] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = > 0x62 > [ 7.742462] ACPI: EC: driver started in interrupt mode > [ 7.742500] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 7.742941] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO > [ 7.743447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 7.743669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > [ 7.746090] ACPI: PCI Interrupt Link [LNKA] (IRQs *6) > [ 7.746182] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) > [ 7.746272] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) > [ 7.746360] ACPI: PCI Interrupt Link [LNKD] (IRQs *6) > [ 7.746449] ACPI: PCI Interrupt Link [LNKE] (IRQs *10) > [ 7.746538] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. > [ 7.746627] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled. > [ 7.746717] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) > [ 7.746832] ACPI: Power Resource [PFN0] (off) > [ 7.746867] ACPI: Power Resource [PFN1] (off) > [ 7.746943] pnp: PnP ACPI init > [ 7.746950] ACPI: bus type pnp registered > [ 7.750580] pnp: PnP ACPI: found 11 devices > [ 7.750582] ACPI: ACPI bus type pnp unregistered > [ 7.750585] PnPBIOS: Disabled by ACPI PNP > [ 7.750803] PCI: Using ACPI for IRQ routing > [ 7.810088] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 > [ 7.810094] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKE] -> GSI 10 > (level, low) -> IRQ 10 > [ 9.024310] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 > [ 9.024314] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 > (level, low) -> IRQ 10 > [ 9.024324] ACPI: PCI interrupt for device 0000:00:1f.6 disabled > [ 10.279606] ACPI: Transitioning device [FAN0] to D3 > [ 10.279609] ACPI: Transitioning device [FAN0] to D3 > [ 10.279613] ACPI: Fan [FAN0] (off) > [ 10.279711] ACPI: Transitioning device [FAN1] to D3 > [ 10.279713] ACPI: Transitioning device [FAN1] to D3 > [ 10.279716] ACPI: Fan [FAN1] (off) > [ 10.287168] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > [ 10.287173] ACPI: Processor [CPU0] (supports 8 throttling states) > [ 10.290989] ACPI: Thermal Zone [THRM] (56 C) > [ 11.033152] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 > [ 11.033159] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 > (level, low) -> IRQ 6 > [ 11.136814] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6 > [ 11.136820] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 > (level, low) -> IRQ 6 > [ 11.240821] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6 > [ 11.240826] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 > (level, low) -> IRQ 6 > [ 11.344728] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 > [ 11.344733] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 > (level, low) -> IRQ 10 > [ 11.470107] ACPI: PCI Interrupt 0000:02:06.2[A] -> Link [LNKE] -> GSI 10 > (level, low) -> IRQ 10 > [ 11.526759] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 > (level, low) -> IRQ 6 > [ 11.584304] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 > (level, low) -> IRQ 6 > [ 11.584351] ACPI: PCI interrupt for device 0000:00:1f.1 disabled > [ 11.608855] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 > (level, low) -> IRQ 6 > [ 28.575467] ACPI: WMI-Acer: Mapper loaded > [ 28.925340] parport_pc 00:08: reported by Plug and Play ACPI > [ 29.268748] acer_acpi: Acer Laptop ACPI Extras version 0.11.1 > [ 29.500554] ACPI: Power Button (FF) [PWRF] > [ 29.517963] ACPI: Lid Switch [LID] > [ 29.544517] ACPI: Sleep Button (CM) [SLPB] > [ 30.367823] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: > no) > [ 32.398230] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 10 > (level, low) -> IRQ 10 > [ 32.585921] ACPI: SBS HC: EC = 0xdc9ab480, offset = 0x18, query_bit = > 0x20 > [ 32.956936] ACPI: Smart Battery System [SBS0]: AC Adapter [AC0] > (on-line) > [ 33.359727] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] > (battery present) > [ 33.396254] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT1] > (battery present) > [ 34.839311] ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKE] -> GSI 10 > (level, low) -> IRQ 10 > [ 34.839463] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 > (level, low) -> IRQ 10 > [ 39.673962] ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: found ejectable bay > [ 39.673968] ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: Adding notify handler > [ 39.674002] ACPI: Error installing bay notify handler > [ 39.674005] ACPI: Bay [\_SB_.PCI0.IDE0.SECN.BAY1] Added > [ 45.871613] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 6 > (level, low) -> IRQ 6 > dbo...@dbortz-laptop:~$ > > > Here is the output of sudo lspci -vvnn: > > 00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV > Processor to I/O Controller [8086:3580] (rev 02) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort+ <MAbort+ >SERR- <PERR- > Latency: 0 > Region 0: Memory at <unassigned> (32-bit, prefetchable) > Capabilities: [40] Vendor Specific Information > > 00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 > GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > > 00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 > GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > > 00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM > Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA > controller]) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 6 > Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] > Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K] > Region 2: I/O ports at 1800 [size=8] > Capabilities: [d0] Power Management version 1 > Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated > Graphics Device [8086:3582] (rev 02) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] > Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K] > Capabilities: [d0] Power Management version 1 > Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) (prog-if 00 > [UHCI]) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 6 > Region 4: I/O ports at 1820 [size=32] > > 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) (prog-if 00 > [UHCI]) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 6 > Region 4: I/O ports at 1840 [size=32] > > 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03) (prog-if 00 > [UHCI]) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 6 > Region 4: I/O ports at 1860 [size=32] > > 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) > USB2 EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI]) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin D routed to IRQ 10 > Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port > > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge > [8086:2448] (rev 83) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort+ > <TAbort- <MAbort- >SERR- <PERR+ > Latency: 0 > Bus: primary=00, secondary=02, subordinate=06, sec-latency=64 > I/O behind bridge: 00003000-00003fff > Memory behind bridge: e0200000-e05fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- <SERR- <PERR+ > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC > Interface Bridge [8086:24cc] (rev 03) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR+ > Latency: 0 > > 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE > Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP]) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 6 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at 1810 [size=16] > Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K] > > 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin B routed to IRQ 10 > Region 4: I/O ports at 1880 [size=32] > > 00:1f.5 Multimedia audio controller [0401]: Intel Corporation > 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev > 03) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 10 > Region 0: I/O ports at 1c00 [size=256] > Region 1: I/O ports at 18c0 [size=64] > Region 2: Memory at e0100c00 (32-bit, non-prefetchable) [size=512] > Region 3: Memory at e0100800 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME+ > > 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03) (prog-if 00 > [Generic]) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin B routed to IRQ 10 > Region 0: I/O ports at 2400 [size=256] > Region 1: I/O ports at 2000 [size=128] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME+ > > 02:02.0 Ethernet controller [0200]: Broadcom Corporation BCM4401 100Base-T > [14e4:4401] (rev 01) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ > <TAbort- <MAbort- >SERR- <PERR+ > Latency: 64 > Interrupt: pin A routed to IRQ 6 > Region 0: Memory at e0204000 (32-bit, non-prefetchable) [size=8K] > [virtual] Expansion ROM at e020c000 [disabled] [size=16K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 02:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG > Network Connection [8086:4220] (rev 05) > Subsystem: Intel Corporation Unknown device [8086:2701] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR+ > Latency: 64 (750ns min, 6000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at e0208000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > > 02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus > Controller [104c:8031] > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 168, Cache Line Size: 128 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at e0209000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 > Memory window 0: 34000000-37fff000 (prefetchable) > Memory window 1: 38000000-3bfff000 > I/O window 0: 00003000-000030ff > I/O window 1: 00003400-000034ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ > PostWrite+ > 16-bit legacy interface ports at 0001 > > 02:06.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE > 1394 Host Controller [104c:8032] (prog-if 10 [OHCI]) > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR+ > Latency: 64 (750ns min, 1000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at e020a000 (32-bit, non-prefetchable) [size=2K] > Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME+ > > 02:06.3 Mass storage controller [0180]: Texas Instruments PCIxx21 > Integrated FlashMedia Controller [104c:8033] > Subsystem: Acer Incorporated [ALI] Unknown device [1025:0064] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR+ > Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at e0206000 (32-bit, non-prefetchable) [size=8K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > dbo...@dbortz-laptop:~$ > -- Smart Battery not working in Hardy Heron https://bugs.launchpad.net/bugs/234653 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
