*** This bug is a duplicate of bug 350609 ***
https://bugs.launchpad.net/bugs/350609
this seems as dupe from bug #350609 .. failed to IDENTIFY (I/O Error...
Feb 13 21:06:09 blubug kernel: [ 963.713392] sd 0:0:0:0: [sda] Starting disk
Feb 13 21:06:09 blubug kernel: [ 963.928189] ata4: SATA link down (SStatus 0
SControl 300)
Feb 13 21:06:09 blubug kernel: [ 964.181340] ata5.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Feb 13 21:06:09 blubug kernel: [ 964.181341] ata5.00: revalidation failed
(errno=-5)
Feb 13 21:06:09 blubug kernel: [ 966.065176] ata1: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Feb 13 21:06:09 blubug kernel: [ 966.079720] ata1.00: configured for UDMA/133
Feb 13 21:06:09 blubug kernel: [ 966.092226] sd 0:0:0:0: [sda] 625142448
512-byte hardware sectors: (320 GB/298 GiB)
Feb 13 21:06:09 blubug kernel: [ 966.092250] sd 0:0:0:0: [sda] Write Protect
is off
Feb 13 21:06:09 blubug kernel: [ 966.092253] sd 0:0:0:0: [sda] Mode Sense: 00
3a 00 00
Feb 13 21:06:09 blubug kernel: [ 966.092283] sd 0:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Feb 13 21:06:09 blubug kernel: [ 967.140178] usb 7-6: reset high speed USB
device using ehci_hcd and address 3
Feb 13 21:06:09 blubug kernel: [ 967.396176] usb 1-1: reset full speed USB
device using uhci_hcd and address 2
Feb 13 21:06:09 blubug kernel: [ 967.660175] usb 5-1: reset full speed USB
device using uhci_hcd and address 2
Feb 13 21:06:09 blubug kernel: [ 967.881391] gl860: Release: 0103
Feb 13 21:06:09 blubug kernel: [ 967.881393] gl860: Number of interfaces : 1
Feb 13 21:06:09 blubug kernel: [ 967.881394] gl860: Version Hulkie/Iceman/Soro
(c)
Feb 13 21:06:09 blubug kernel: [ 967.881395] gl860: Genesys USB2.0 - GL860
based webcam found.
Feb 13 21:06:09 blubug kernel: [ 967.881396] gl860: Genesys USB2.0 2.0M WebCam
- Product ID 0x0503.
Feb 13 21:06:09 blubug kernel: [ 969.344373] ata5.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Feb 13 21:06:09 blubug kernel: [ 969.344375] ata5.00: revalidation failed
(errno=-5)
** This bug has been marked a duplicate of bug 350609
WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177
suspend_test_finish+0x7c/0x80() with kern.log mesages ata2: softreset failed
(device not ready), ata2.00: qc timeout (cmd 0xec), ata2.00: failed to IDENTIFY
(I/O error, err_mask=0x4)
--
WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177
suspend_test_finish+0x7c/0x80()
https://bugs.launchpad.net/bugs/329254
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
