Public bug reported:
I upgraded to Jaunty, and now the USB sticks cannot be mounted.
the contents of /etc/fstab are:
proc /proc proc defaults
0 0
/dev/sda2
UUID=6120e91d-2f93-4d84-aa1a-0e78227a8bf0
/ ext3 relatime,errors=remount-ro 0 1
/dev/sda1
UUID=760053060052CCAD /media/OldWindowsBackup ntfs
defaults,umask=007,gid=46 0 1
# /dev/sda3
UUID=d2f6883d-da29-420d-822c-858270b74e97 none swap sw
0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0
0
/dev/scd1 /media/cdrom1 udf,iso9660 user,noauto,exec,utf8 0
0
/dev/sda1 /media/OldWindowsBackup ntfs
ro,user,fmask=0111,dmask=0000 0 0
/dev/sdb1 /media/WinXP ntfs
ro,user,fmask=0111,dmask=0000 0 0
/dev/sdb2 /media/Linux#2 ext3 nonauto,relatime
0 0
/dev/sdb4 /media/Linux#3 ext3 nonauto,relatime
0 0
/dev/sdb5 /media/Linux#4 ext3 nonauto,relatime 0
0
/dev/sdb6 /media/Linux#5 ext3 nonauto,relatime 0 0
/dev/sdc1 /mnt/usbdrive vfat rw,user,noauto,umask=0000 0 0
/dev/sdg /media/usb1 rw,user,noauto 0 0
/dev/sdh /media/usb2 rw,user,noauto 0 0
# 1001 is the USB group ID
none /proc/bus/usb usbusers devgid=1001,devmode660 0 0
the command :
uname-a > uname-a.log
bash: uname-a command not found
The command:
lspci-vnvn > lspci-vnvn.log asks for the sudo password, then says:
sudo: lspci-vnvn: command not found
The contents of dmesg.log is:
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (bui...@palmer) (gcc version
4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
(Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe7e000 (usable)
[ 0.000000] BIOS-e820: 000000007fe7e000 - 000000007fee9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee9000 - 000000007feed000 (usable)
[ 0.000000] BIOS-e820: 000000007feed000 - 000000007feff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007feff000 - 000000007ff00000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x7ff00 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fe7e000 (usable)
[ 0.000000] modified: 000000007fe7e000 - 000000007fee9000 (ACPI NVS)
[ 0.000000] modified: 000000007fee9000 - 000000007feed000 (usable)
[ 0.000000] modified: 000000007feed000 - 000000007feff000 (ACPI data)
[ 0.000000] modified: 000000007feff000 - 000000007ff00000 (usable)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378ca000 - 37fef0c6
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fa60c6
[ 0.000000] Move RAMDISK from 00000000378ca000 - 0000000037fef0c5 to
00881000 - 00fa60c5
[ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )
[ 0.000000] ACPI: RSDT 7FEFDE48, 0038 (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: FACP 7FEFCF10, 0074 (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: DSDT 7FEF8010, 3FE8 (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: FACS 7FEE5C40, 0040
[ 0.000000] ACPI: APIC 7FEFCE10, 0078 (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: WDDT 7FEF7F90, 0040 (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: MCFG 7FEF7F10, 003C (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: ASF! 7FEFCD10, 00A6 (r32 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1163MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000
- 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000
- 0000881000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000
- 0000012000]
[ 0.000000] #7 [0000881000 - 0000fa60c6] NEW RAMDISK ==> [0000881000
- 0000fa60c6]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000
- 0000019000]
[ 0.000000] found SMP MP-table at [c00fe680] 000fe680
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007ff00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x0007fe7e
[ 0.000000] 0: 0x0007fee9 -> 0x0007feed
[ 0.000000] 0: 0x0007feff -> 0x0007ff00
[ 0.000000] On node 0 totalpages: 523784
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map
c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3941 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2327 pages used for memmap
[ 0.000000] HighMem zone: 295278 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
7ff00000:80100000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 519689
[ 0.000000] Kernel command line:
root=UUID=6120e91d-2f93-4d84-aa1a-0e78227a8bf0 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.856 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 10480640 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2051684k/2096128k available (4126k kernel code, 42668k
reserved, 2208k data, 532k init, 1190420k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5999.71 BogoMIPS (lpj=11999424)
[ 0.004031] Security Framework initialized
[ 0.004038] SELinux: Disabled at boot.
[ 0.004058] AppArmor: AppArmor initialized
[ 0.004070] Mount-cache hash table entries: 512
[ 0.004227] Initializing cgroup subsys ns
[ 0.004232] Initializing cgroup subsys cpuacct
[ 0.004235] Initializing cgroup subsys memory
[ 0.004240] Initializing cgroup subsys freezer
[ 0.004260] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004264] CPU: L2 cache: 2048K
[ 0.004268] CPU: Physical Processor ID: 0
[ 0.004270] CPU: Processor Core ID: 0
[ 0.004273] using mwait in idle threads.
[ 0.004286] Checking 'hlt' instruction... OK.
[ 0.023336] ACPI: Core revision 20080926
[ 0.025514] ACPI: Checking initramfs for custom DSDT
[ 0.314344] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.354035] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
[ 0.356001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 6000.42
BogoMIPS (lpj=12000847)
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.440540] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
[ 0.440558] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.444031] Brought up 2 CPUs
[ 0.444035] Total of 2 processors activated (12000.13 BogoMIPS).
[ 0.444086] CPU0 attaching sched-domain:
[ 0.444089] domain 0: span 0-1 level CPU
[ 0.444092] groups: 0 1
[ 0.444100] CPU1 attaching sched-domain:
[ 0.444102] domain 0: span 0-1 level CPU
[ 0.444105] groups: 1 0
[ 0.444173] net_namespace: 776 bytes
[ 0.444173] Booting paravirtualized kernel on bare hardware
[ 0.444382] Time: 18:05:03 Date: 05/04/09
[ 0.444382] regulator: core version 0.5
[ 0.444382] NET: Registered protocol family 16
[ 0.444382] EISA bus registered
[ 0.444382] ACPI: bus type pci registered
[ 0.444382] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory
Controller Hub without MMCONFIG support.
[ 0.448123] PCI: Using configuration type 1 for base access
[ 0.449304] ACPI: EC: Look up EC in DSDT
[ 0.454318] ACPI: Interpreter enabled
[ 0.454324] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.454351] ACPI: Using IOAPIC for interrupt routing
[ 0.459389] ACPI: No dock devices found.
[ 0.459403] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.459522] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.459527] pci 0000:00:01.0: PME# disabled
[ 0.459601] pci 0000:00:1b.0: reg 10 64bit mmio: [0x92100000-0x92103fff]
[ 0.459637] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.459642] pci 0000:00:1b.0: PME# disabled
[ 0.459696] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.459701] pci 0000:00:1c.0: PME# disabled
[ 0.459758] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.459763] pci 0000:00:1c.2: PME# disabled
[ 0.459818] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.459823] pci 0000:00:1c.3: PME# disabled
[ 0.459878] pci 0000:00:1d.0: reg 20 io port: [0x2080-0x209f]
[ 0.459933] pci 0000:00:1d.1: reg 20 io port: [0x2060-0x207f]
[ 0.459987] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
[ 0.460051] pci 0000:00:1d.3: reg 20 io port: [0x2020-0x203f]
[ 0.460111] pci 0000:00:1d.7: reg 10 32bit mmio: [0x92104000-0x921043ff]
[ 0.460155] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.460161] pci 0000:00:1d.7: PME# disabled
[ 0.460296] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.460303] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
[ 0.460307] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.460340] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.460348] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.460356] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.460363] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.460371] pci 0000:00:1f.1: reg 20 io port: [0x20b0-0x20bf]
[ 0.460416] pci 0000:00:1f.2: reg 10 io port: [0x20c8-0x20cf]
[ 0.460423] pci 0000:00:1f.2: reg 14 io port: [0x20e4-0x20e7]
[ 0.460430] pci 0000:00:1f.2: reg 18 io port: [0x20c0-0x20c7]
[ 0.460437] pci 0000:00:1f.2: reg 1c io port: [0x20e0-0x20e3]
[ 0.460444] pci 0000:00:1f.2: reg 20 io port: [0x20a0-0x20af]
[ 0.460465] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.460469] pci 0000:00:1f.2: PME# disabled
[ 0.460520] pci 0000:00:1f.3: reg 20 io port: [0x2000-0x201f]
[ 0.460580] pci 0000:01:00.0: reg 10 32bit mmio: [0x91000000-0x91ffffff]
[ 0.460592] pci 0000:01:00.0: reg 14 64bit mmio: [0x80000000-0x8fffffff]
[ 0.460603] pci 0000:01:00.0: reg 1c 64bit mmio: [0x90000000-0x90ffffff]
[ 0.460614] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 0.460671] pci 0000:00:01.0: bridge 32bit mmio: [0x90000000-0x91ffffff]
[ 0.460677] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x8fffffff]
[ 0.460727] pci 0000:00:1c.0: bridge 32bit mmio: [0x92200000-0x922fffff]
[ 0.460781] pci 0000:00:1c.2: bridge 32bit mmio: [0x92300000-0x923fffff]
[ 0.460836] pci 0000:00:1c.3: bridge 32bit mmio: [0x92400000-0x924fffff]
[ 0.460882] pci 0000:05:01.0: reg 10 32bit mmio: [0x92005800-0x920058ff]
[ 0.460891] pci 0000:05:01.0: reg 14 io port: [0x1140-0x1147]
[ 0.460899] pci 0000:05:01.0: reg 18 io port: [0x1000-0x10ff]
[ 0.460933] pci 0000:05:01.0: supports D2
[ 0.460936] pci 0000:05:01.0: PME# supported from D2 D3hot D3cold
[ 0.460941] pci 0000:05:01.0: PME# disabled
[ 0.460985] pci 0000:05:05.0: reg 10 32bit mmio: [0x92005000-0x920057ff]
[ 0.460994] pci 0000:05:05.0: reg 14 32bit mmio: [0x92000000-0x92003fff]
[ 0.461034] pci 0000:05:05.0: supports D1 D2
[ 0.461036] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.461042] pci 0000:05:05.0: PME# disabled
[ 0.461083] pci 0000:05:08.0: reg 10 32bit mmio: [0x92004000-0x92004fff]
[ 0.461091] pci 0000:05:08.0: reg 14 io port: [0x1100-0x113f]
[ 0.461129] pci 0000:05:08.0: supports D1 D2
[ 0.461131] pci 0000:05:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.461136] pci 0000:05:08.0: PME# disabled
[ 0.461177] pci 0000:00:1e.0: transparent bridge
[ 0.461182] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
[ 0.461187] pci 0000:00:1e.0: bridge 32bit mmio: [0x92000000-0x920fffff]
[ 0.461218] bus 00 -> node 0
[ 0.461224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.461657] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.462147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.462305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.462461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.465922] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.466071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.466216] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.466361] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.466506] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.466651] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0,
disabled.
[ 0.466798] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.466943] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.467159] ACPI: WMI: Mapper loaded
[ 0.467214] SCSI subsystem initialized
[ 0.467214] libata version 3.00 loaded.
[ 0.467214] usbcore: registered new interface driver usbfs
[ 0.467214] usbcore: registered new interface driver hub
[ 0.467214] usbcore: registered new device driver usb
[ 0.467214] PCI: Using ACPI for IRQ routing
[ 0.472015] Bluetooth: Core ver 2.13
[ 0.472032] NET: Registered protocol family 31
[ 0.472032] Bluetooth: HCI device and connection manager initialized
[ 0.472032] Bluetooth: HCI socket layer initialized
[ 0.472032] NET: Registered protocol family 8
[ 0.472032] NET: Registered protocol family 20
[ 0.472045] NetLabel: Initializing
[ 0.472047] NetLabel: domain hash size = 128
[ 0.472049] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.472065] NetLabel: unlabeled traffic allowed by default
[ 0.472158] hpet clockevent registered
[ 0.472162] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.472168] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.472174] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.476074] AppArmor: AppArmor Filesystem Enabled
[ 0.484013] pnp: PnP ACPI init
[ 0.484030] ACPI: bus type pnp registered
[ 0.487604] pnp: PnP ACPI: found 12 devices
[ 0.487607] ACPI: ACPI bus type pnp unregistered
[ 0.487611] PnPBIOS: Disabled by ACPI PNP
[ 0.487624] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.487628] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 0.487631] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.487634] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.487637] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.487640] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.487643] system 00:01: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.487647] system 00:01: iomem range 0xc0000-0xdffff could not be reserved
[ 0.487650] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.487660] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.487663] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.487666] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.522423] pci 0000:01:00.0: BAR 6: can't allocate mem resource
[0x90000000-0x8fffffff]
[ 0.522428] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.522430] pci 0000:00:01.0: IO window: disabled
[ 0.522435] pci 0000:00:01.0: MEM window: 0x90000000-0x91ffffff
[ 0.522440] pci 0000:00:01.0: PREFETCH window:
0x00000080000000-0x0000008fffffff
[ 0.522446] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.522448] pci 0000:00:1c.0: IO window: disabled
[ 0.522454] pci 0000:00:1c.0: MEM window: 0x92200000-0x922fffff
[ 0.522458] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.522465] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.522467] pci 0000:00:1c.2: IO window: disabled
[ 0.522473] pci 0000:00:1c.2: MEM window: 0x92300000-0x923fffff
[ 0.522478] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.522485] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[ 0.522487] pci 0000:00:1c.3: IO window: disabled
[ 0.522492] pci 0000:00:1c.3: MEM window: 0x92400000-0x924fffff
[ 0.522497] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.522504] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.522508] pci 0000:00:1e.0: IO window: 0x1000-0x1fff
[ 0.522514] pci 0000:00:1e.0: MEM window: 0x92000000-0x920fffff
[ 0.522518] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.522534] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.522539] pci 0000:00:01.0: setting latency timer to 64
[ 0.522550] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.522555] pci 0000:00:1c.0: setting latency timer to 64
[ 0.522565] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.522570] pci 0000:00:1c.2: setting latency timer to 64
[ 0.522580] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.522585] pci 0000:00:1c.3: setting latency timer to 64
[ 0.522593] pci 0000:00:1e.0: setting latency timer to 64
[ 0.522597] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.522600] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.522602] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.522605] bus: 01 index 1 mmio: [0x90000000-0x91ffffff]
[ 0.522607] bus: 01 index 2 mmio: [0x80000000-0x8fffffff]
[ 0.522610] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.522612] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.522614] bus: 02 index 1 mmio: [0x92200000-0x922fffff]
[ 0.522616] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.522618] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.522621] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.522623] bus: 03 index 1 mmio: [0x92300000-0x923fffff]
[ 0.522625] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.522627] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.522629] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.522632] bus: 04 index 1 mmio: [0x92400000-0x924fffff]
[ 0.522634] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.522636] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.522639] bus: 05 index 0 io port: [0x1000-0x1fff]
[ 0.522641] bus: 05 index 1 mmio: [0x92000000-0x920fffff]
[ 0.522643] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.522645] bus: 05 index 3 io port: [0x00-0xffff]
[ 0.522648] bus: 05 index 4 mmio: [0x000000-0xffffffff]
[ 0.522656] NET: Registered protocol family 2
[ 0.536080] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.536414] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.536765] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.536941] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.536944] TCP reno registered
[ 0.544100] NET: Registered protocol family 1
[ 0.544251] checking if image is initramfs... it is
[ 0.972648] Switched to high resolution mode on CPU 1
[ 0.976055] Switched to high resolution mode on CPU 0
[ 1.132226] Freeing initrd memory: 7316k freed
[ 1.132431] cpufreq: No nForce2 chipset.
[ 1.132592] audit: initializing netlink socket (disabled)
[ 1.132613] type=2000 audit(1241460303.132:1): initialized
[ 1.140912] highmem bounce pool size: 64 pages
[ 1.140919] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.142465] VFS: Disk quotas dquot_6.5.1
[ 1.142538] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.143312] fuse init (API version 7.10)
[ 1.143419] msgmni has been set to 1697
[ 1.143642] alg: No test for stdrng (krng)
[ 1.143659] io scheduler noop registered
[ 1.143662] io scheduler anticipatory registered
[ 1.143665] io scheduler deadline registered
[ 1.143684] io scheduler cfq registered (default)
[ 1.143900] pci 0000:01:00.0: Boot video device
[ 1.143927] pci 0000:05:08.0: Firmware left e100 interrupts enabled;
disabling
[ 1.145951] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.145994] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.146024] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.146037] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.146101] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.146138] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.146166] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.146180] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.146198] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.146265] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.146302] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.146331] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[ 1.146344] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.146362] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.146429] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.146466] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.146494] pcieport-driver 0000:00:1c.3: irq 2300 for MSI/MSI-X
[ 1.146508] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.146525] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.146606] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.146710] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.146868] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.146872] ACPI: Power Button (FF) [PWRF]
[ 1.146931] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.146939] ACPI: Sleep Button (CM) [SLPB]
[ 1.147199] processor ACPI_CPU:00: registered as cooling_device0
[ 1.147252] processor ACPI_CPU:01: registered as cooling_device1
[ 1.148737] isapnp: Scanning for PnP cards...
[ 1.500421] isapnp: No Plug & Play device found
[ 1.508656] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.508758] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.509224] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.510182] brd: module loaded
[ 1.510614] loop: module loaded
[ 1.510699] Fixed MDIO Bus: probed
[ 1.510705] PPP generic driver version 2.4.2
[ 1.510773] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 1.510812] Driver 'sd' needs updating - please use bus_type methods
[ 1.510825] Driver 'sr' needs updating - please use bus_type methods
[ 1.510915] ata_piix 0000:00:1f.1: version 2.12
[ 1.510927] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.510968] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.511047] scsi0 : ata_piix
[ 1.511152] scsi1 : ata_piix
[ 1.511919] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20b0 irq 14
[ 1.511923] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20b8 irq 15
[ 1.868350] ata1.00: ATAPI: SONY DVD RW DW-G120A, MYS2, max UDMA/66
[ 1.868395] ata1.01: ATAPI: SONY DVD-ROM DDU1615, FYS2, max UDMA/33
[ 1.868426] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.900302] ata1.00: configured for UDMA/33
[ 1.916300] ata1.01: configured for UDMA/33
[ 1.917038] ata2: port disabled. ignoring.
[ 1.917941] scsi 0:0:0:0: CD-ROM SONY DVD RW DW-G120A MYS2
PQ: 0 ANSI: 5
[ 1.922043] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 1.922047] Uniform CD-ROM driver Revision: 3.20
[ 1.922184] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.922254] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.922796] scsi 0:0:1:0: CD-ROM SONY DVD-ROM DDU1615 FYS2
PQ: 0 ANSI: 5
[ 1.924639] sr1: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray
[ 1.924715] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1.924767] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.924800] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.924805] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.924856] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.924927] scsi2 : ata_piix
[ 1.925004] scsi3 : ata_piix
[ 1.925167] ata3: SATA max UDMA/133 cmd 0x20c8 ctl 0x20e4 bmdma 0x20a0 irq 19
[ 1.925170] ata4: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e0 bmdma 0x20a8 irq 19
[ 2.088326] ata3.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
[ 2.088329] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.096342] ata3.00: configured for UDMA/133
[ 2.260318] ata4.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
[ 2.260322] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.268346] ata4.00: configured for UDMA/133
[ 2.268439] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10
PQ: 0 ANSI: 5
[ 2.268561] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250
GB/232 GiB)
[ 2.268585] sd 2:0:0:0: [sda] Write Protect is off
[ 2.268588] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.268625] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.268698] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250
GB/232 GiB)
[ 2.268719] sd 2:0:0:0: [sda] Write Protect is off
[ 2.268722] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.268759] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.268763] sda: sda1 sda2 sda3
[ 2.293638] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.293688] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.293783] scsi 3:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10
PQ: 0 ANSI: 5
[ 2.293897] sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250
GB/232 GiB)
[ 2.293918] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.293921] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.293958] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.294024] sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250
GB/232 GiB)
[ 2.294044] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.294048] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.294084] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.294088] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > sdb4
[ 2.330187] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.330236] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.331093] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.331121] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.331148] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.331153] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.331229] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 2.335126] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.335134] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 2.335149] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x92104000
[ 2.348013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.348101] usb usb1: configuration #1 chosen from 1 choice
[ 2.348139] hub 1-0:1.0: USB hub found
[ 2.348149] hub 1-0:1.0: 8 ports detected
[ 2.348287] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.348308] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.348338] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.348344] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.348348] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.348401] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 2.348426] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
[ 2.348521] usb usb2: configuration #1 chosen from 1 choice
[ 2.348555] hub 2-0:1.0: USB hub found
[ 2.348563] hub 2-0:1.0: 2 ports detected
[ 2.348665] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.348672] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.348676] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.348730] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 2.348754] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[ 2.348841] usb usb3: configuration #1 chosen from 1 choice
[ 2.348876] hub 3-0:1.0: USB hub found
[ 2.348890] hub 3-0:1.0: 2 ports detected
[ 2.348996] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.349003] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.349007] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.349059] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 2.349091] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 2.349177] usb usb4: configuration #1 chosen from 1 choice
[ 2.349210] hub 4-0:1.0: USB hub found
[ 2.349218] hub 4-0:1.0: 2 ports detected
[ 2.349320] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.349327] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.349330] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.349389] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 2.349421] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[ 2.349509] usb usb5: configuration #1 chosen from 1 choice
[ 2.349545] hub 5-0:1.0: USB hub found
[ 2.349554] hub 5-0:1.0: 2 ports detected
[ 2.349707] usbcore: registered new interface driver libusual
[ 2.349751] usbcore: registered new interface driver usbserial
[ 2.349765] USB Serial support registered for generic
[ 2.349786] usbcore: registered new interface driver usbserial_generic
[ 2.349789] usbserial: USB Serial Driver core
[ 2.349849] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 2.352665] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.352674] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.356053] mice: PS/2 mouse device common for all mice
[ 2.368082] rtc_cmos 00:03: RTC can wake from S4
[ 2.368126] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.368154] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.368232] device-mapper: uevent: version 1.0.3
[ 2.368356] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-de...@redhat.com
[ 2.368459] device-mapper: multipath: version 1.0.5 loaded
[ 2.368463] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.368565] EISA: Probing bus 0 at eisa.0
[ 2.368572] Cannot allocate resource for EISA slot 1
[ 2.368575] Cannot allocate resource for EISA slot 2
[ 2.368596] EISA: Detected 0 cards.
[ 2.368663] cpuidle: using governor ladder
[ 2.368667] cpuidle: using governor menu
[ 2.369361] TCP cubic registered
[ 2.369454] NET: Registered protocol family 10
[ 2.370014] lo: Disabled Privacy Extensions
[ 2.370462] NET: Registered protocol family 17
[ 2.370483] Bluetooth: L2CAP ver 2.11
[ 2.370486] Bluetooth: L2CAP socket layer initialized
[ 2.370490] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.370492] Bluetooth: SCO socket layer initialized
[ 2.370531] Bluetooth: RFCOMM socket layer initialized
[ 2.370540] Bluetooth: RFCOMM TTY layer initialized
[ 2.370542] Bluetooth: RFCOMM ver 1.10
[ 2.370598] Using IPI No-Shortcut mode
[ 2.370699] registered taskstats version 1
[ 2.370834] Magic number: 9:714:88
[ 2.370901] rtc_cmos 00:03: setting system clock to 2009-05-04 18:05:05 UTC
(1241460305)
[ 2.370905] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.370907] EDD information not available.
[ 2.371228] Freeing unused kernel memory: 532k freed
[ 2.371391] Write protecting the kernel text: 4128k
[ 2.371454] Write protecting the kernel read-only data: 1532k
[ 2.401066] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
[ 2.664525] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 2.705129] ohci1394 0000:05:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.721671] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 2.721675] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.754939] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
MMIO=[92005000-920057ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.757554] e100 0000:05:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.777471] e100 0000:05:08.0: PME# disabled
[ 2.778318] e100: eth0: e100_probe: addr 0x92004000, irq 20, MAC addr
00:16:76:21:01:e1
[ 2.835306] usb 1-2: configuration #1 chosen from 1 choice
[ 2.835626] hub 1-2:1.0: USB hub found
[ 2.835993] hub 1-2:1.0: 4 ports detected
[ 2.956040] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 3.090835] usb 1-3: configuration #1 chosen from 1 choice
[ 3.194063] PM: Starting manual resume from disk
[ 3.194068] PM: Resume from partition 8:3
[ 3.194070] PM: Checking hibernation image.
[ 3.194265] PM: Resume from disk failed.
[ 3.204025] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 3.218573] kjournald starting. Commit interval 5 seconds
[ 3.218583] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.347830] usb 1-5: configuration #1 chosen from 1 choice
[ 3.460019] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 3.593575] usb 1-8: configuration #1 chosen from 1 choice
[ 3.912351] Initializing USB Mass Storage driver...
[ 3.912509] scsi4 : SCSI emulation for USB Mass Storage devices
[ 3.912605] usb-storage: device found at 4
[ 3.912609] usb-storage: waiting for device to settle before scanning
[ 3.912675] scsi5 : SCSI emulation for USB Mass Storage devices
[ 3.912754] usb-storage: device found at 5
[ 3.912756] usb-storage: waiting for device to settle before scanning
[ 3.912769] usbcore: registered new interface driver usb-storage
[ 3.912774] USB Mass Storage support registered.
[ 4.028169] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00902700019e71af]
[ 8.912182] usb-storage: device scan complete
[ 8.912527] usb-storage: device scan complete
[ 8.913282] scsi 5:0:0:0: Direct-Access USB 2.0 Flash Disk 1100
PQ: 0 ANSI: 0 CCS
[ 8.914762] sd 5:0:0:0: [sdc] 3963904 512-byte hardware sectors: (2.02
GB/1.88 GiB)
[ 8.915758] sd 5:0:0:0: [sdc] Write Protect is off
[ 8.915762] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 8.915765] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 8.916155] scsi 4:0:0:0: Direct-Access USB2.0 CF CardReader 9144
PQ: 0 ANSI: 0
[ 8.918260] sd 5:0:0:0: [sdc] 3963904 512-byte hardware sectors: (2.02
GB/1.88 GiB)
[ 8.919258] sd 5:0:0:0: [sdc] Write Protect is off
[ 8.919261] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 8.919263] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 8.919267] sdc:<5>scsi 4:0:0:1: Direct-Access USB2.0 SM CardReader
9144 PQ: 0 ANSI: 0
[ 8.920014] sdc1
[ 8.920139] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 8.920213] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 8.923398] scsi 4:0:0:2: Direct-Access USB2.0 SD CardReader 9144
PQ: 0 ANSI: 0
[ 8.927028] scsi 4:0:0:3: Direct-Access USB2.0 MS CardReader 9144
PQ: 0 ANSI: 0
[ 8.928584] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[ 8.928637] sd 4:0:0:0: Attached scsi generic sg5 type 0
[ 8.929830] sd 4:0:0:1: [sde] Attached SCSI removable disk
[ 8.929883] sd 4:0:0:1: Attached scsi generic sg6 type 0
[ 8.931080] sd 4:0:0:2: [sdf] Attached SCSI removable disk
[ 8.931136] sd 4:0:0:2: Attached scsi generic sg7 type 0
[ 8.932335] sd 4:0:0:3: [sdg] Attached SCSI removable disk
[ 8.932388] sd 4:0:0:3: Attached scsi generic sg8 type 0
[ 9.714799] udev: starting version 141
[ 9.853101] parport_pc 00:07: reported by Plug and Play ACPI
[ 9.853160] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
[ 9.858443] parport0: Printer, Samsung ML-1740
[ 9.907438] Linux agpgart interface v0.103
[ 10.622511] nvidia: module license 'NVIDIA' taints kernel.
[ 10.876232] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.876242] nvidia 0000:01:00.0: setting latency timer to 64
[ 10.877576] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23
14:59:10 PST 2009
[ 10.901043] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid
0x04A9 pid 0x1709
[ 10.901068] usbcore: registered new interface driver usblp
[ 10.974186] intel_rng: Firmware space is locked read-only. If you can't or
[ 10.974189] intel_rng: don't want to disable this in firmware setup, and if
[ 10.974190] intel_rng: you are certain that your system has a functional
[ 10.974191] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 11.049919] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 11.056968] ppdev: user-space parallel port driver
[ 11.147561] iTCO_vendor_support: vendor-support=0
[ 11.149388] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 11.149574] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2,
TCOBASE=0x0460)
[ 11.149681] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.154547] synaptics was reset on resume, see synaptics_resume_reset if you
have trouble on resume
[ 11.541136] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 11.541217] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.627329] psmouse serio1: ID: 10 00 64<6>lp0: using parport0
(interrupt-driven).
[ 11.978612] Adding 4819492k swap on /dev/sda3. Priority:-1 extents:1
across:4819492k
[ 11.985442] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 11.985755] EXT3 FS on sda2, internal journal
[ 12.248354] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
[ 13.510402] EXT3-fs: Unrecognized mount option "nonauto" or missing value
[ 13.525175] EXT3-fs: Unrecognized mount option "nonauto" or missing value
[ 13.525525] EXT3-fs: Unrecognized mount option "nonauto" or missing value
[ 13.525863] EXT3-fs: Unrecognized mount option "nonauto" or missing value
[ 14.023520] type=1505 audit(1241478317.149:2): operation="profile_load"
name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2209
[ 14.081615] type=1505 audit(1241478317.209:3): operation="profile_load"
name="/sbin/dhclient-script" name2="default" pid=2213
[ 14.081719] type=1505 audit(1241478317.209:4): operation="profile_load"
name="/sbin/dhclient3" name2="default" pid=2213
[ 14.081765] type=1505 audit(1241478317.209:5): operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2213
[ 14.081808] type=1505 audit(1241478317.209:6): operation="profile_load"
name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2213
[ 14.168251] type=1505 audit(1241478317.297:7): operation="profile_load"
name="/usr/bin/freshclam" name2="default" pid=2220
[ 14.373247] type=1505 audit(1241478317.501:8): operation="profile_load"
name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2224
[ 14.373412] type=1505 audit(1241478317.501:9): operation="profile_load"
name="/usr/sbin/cupsd" name2="default" pid=2224
[ 14.404236] type=1505 audit(1241478317.533:10): operation="profile_load"
name="/usr/sbin/tcpdump" name2="default" pid=2228
[ 20.583274] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.583278] Bluetooth: BNEP filters: protocol multicast
[ 20.617926] Bridge firewalling registered
[ 26.424267] ppdev0: registered pardevice
[ 26.428943] ppdev0: unregistered pardevice
[ 26.885620] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.888625] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 26.888860] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 37.596506] eth0: no IPv6 routers present
and the contents of version.log is:
Ubuntu 2.6.28-11.42-generic
I am sorry, but I cannot give you a package name, I do not know which package
is supposed to mount USB drives.
None of my USB stick drives mount, including two new ones right out of the HP
package.
** Affects: linux-meta (Ubuntu)
Importance: Undecided
Status: New
--
cannot mount usb sticks after upgrade
https://bugs.launchpad.net/bugs/372496
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
