/etc/fstab now contains:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options>
<dump> <pass>
proc /proc proc defaults
0 0
/dev/sda2
UUID=6120e91d-2f93-4d84-aa1a-0e78227a8bf0
/ ext3 relatime,errors=remount-ro 0 1
/dev/sda1
UUID=760053060052CCAD /media/OldWindowsBackup ntfs
defaults,umask=007,gid=46 0 1
# /dev/sda3
UUID=d2f6883d-da29-420d-822c-858270b74e97 none swap sw
0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0
0
/dev/scd1 /media/cdrom1 udf,iso9660 user,noauto,exec,utf8 0
0
/dev/sda1 /media/OldWindowsBackup ntfs
ro,user,fmask=0111,dmask=0000 0 0
/dev/sdb1 /media/WinXP ntfs
ro,user,fmask=0111,dmask=0000 0 0
/dev/sdb2 /media/Linux#2 ext3 noauto,relatime
0 0
/dev/sdb4 /media/Linux#3 ext3 noauto,relatime
0 0
/dev/sdb5 /media/Linux#4 ext3 noauto,relatime 0 0
/dev/sdb6 /media/Linux#5 ext3 noauto,relatime 0 0
/dev/sdc1 /mnt/usbdrive vfat
rw,user,noauto,umask=0000 0 0
/dev/sdg /media/usb1 vfat rw,user,noauto 0 0
/dev/sdh /media/usb2 vfat rw,user,noauto 0 0
# 1001 is the USB group ID
none /proc/bus/usb usbusers devgid=1001,devmode660 0 0
lsusb produces:
$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 07cc:0500 Carry Computer Eng., Co., Ltd Mass Storage
Bus 001 Device 003: ID 04a9:1709 Canon, Inc. PIXMA MP150 Scanner
Bus 001 Device 002: ID 05e3:0660 Genesys Logic, Inc. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Inserting a Sony stick produces:
$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 054c:0243 Sony Corp. MicroVault Flash Drive
Bus 001 Device 004: ID 07cc:0500 Carry Computer Eng., Co., Ltd Mass Storage
Bus 001 Device 003: ID 04a9:1709 Canon, Inc. PIXMA MP150 Scanner
Bus 001 Device 002: ID 05e3:0660 Genesys Logic, Inc. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
so I know it can see the device (008) but doesn't mount it. In
Nautilus, an additional "USB Drive" appears when looking at the
"computer:///" but clicking on the drive says "unable to mount location,
No media in drive"
there is no unusual output for the command: sudo mount -t vfat
/dev/sdg /mnt
dmesg output:
$ dmesg
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (bui...@palmer) (gcc version
4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
(Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe7e000 (usable)
[ 0.000000] BIOS-e820: 000000007fe7e000 - 000000007fee9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee9000 - 000000007feed000 (usable)
[ 0.000000] BIOS-e820: 000000007feed000 - 000000007feff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007feff000 - 000000007ff00000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x7ff00 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fe7e000 (usable)
[ 0.000000] modified: 000000007fe7e000 - 000000007fee9000 (ACPI NVS)
[ 0.000000] modified: 000000007fee9000 - 000000007feed000 (usable)
[ 0.000000] modified: 000000007feed000 - 000000007feff000 (ACPI data)
[ 0.000000] modified: 000000007feff000 - 000000007ff00000 (usable)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378ca000 - 37fef0c6
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fa60c6
[ 0.000000] Move RAMDISK from 00000000378ca000 - 0000000037fef0c5 to
00881000 - 00fa60c5
[ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )
[ 0.000000] ACPI: RSDT 7FEFDE48, 0038 (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: FACP 7FEFCF10, 0074 (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: DSDT 7FEF8010, 3FE8 (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: FACS 7FEE5C40, 0040
[ 0.000000] ACPI: APIC 7FEFCE10, 0078 (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: WDDT 7FEF7F90, 0040 (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: MCFG 7FEF7F10, 003C (r1 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: ASF! 7FEFCD10, 00A6 (r32 INTEL D945GTP BCD MSFT
1000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1163MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000
- 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000
- 0000881000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000
- 0000012000]
[ 0.000000] #7 [0000881000 - 0000fa60c6] NEW RAMDISK ==> [0000881000
- 0000fa60c6]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000
- 0000019000]
[ 0.000000] found SMP MP-table at [c00fe680] 000fe680
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007ff00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x0007fe7e
[ 0.000000] 0: 0x0007fee9 -> 0x0007feed
[ 0.000000] 0: 0x0007feff -> 0x0007ff00
[ 0.000000] On node 0 totalpages: 523784
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map
c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3941 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2327 pages used for memmap
[ 0.000000] HighMem zone: 295278 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
7ff00000:80100000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 519689
[ 0.000000] Kernel command line:
root=UUID=6120e91d-2f93-4d84-aa1a-0e78227a8bf0 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3000.064 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 10480640 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2051684k/2096128k available (4126k kernel code, 42668k
reserved, 2208k data, 532k init, 1190420k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6000.12 BogoMIPS (lpj=12000256)
[ 0.004032] Security Framework initialized
[ 0.004038] SELinux: Disabled at boot.
[ 0.004059] AppArmor: AppArmor initialized
[ 0.004071] Mount-cache hash table entries: 512
[ 0.004227] Initializing cgroup subsys ns
[ 0.004232] Initializing cgroup subsys cpuacct
[ 0.004236] Initializing cgroup subsys memory
[ 0.004240] Initializing cgroup subsys freezer
[ 0.004260] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004265] CPU: L2 cache: 2048K
[ 0.004268] CPU: Physical Processor ID: 0
[ 0.004270] CPU: Processor Core ID: 0
[ 0.004274] using mwait in idle threads.
[ 0.004287] Checking 'hlt' instruction... OK.
[ 0.023335] ACPI: Core revision 20080926
[ 0.025512] ACPI: Checking initramfs for custom DSDT
[ 0.310538] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.350908] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
[ 0.352001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 6000.43
BogoMIPS (lpj=12000868)
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.436573] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
[ 0.436591] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.440031] Brought up 2 CPUs
[ 0.440036] Total of 2 processors activated (12000.56 BogoMIPS).
[ 0.440086] CPU0 attaching sched-domain:
[ 0.440089] domain 0: span 0-1 level CPU
[ 0.440092] groups: 0 1
[ 0.440100] CPU1 attaching sched-domain:
[ 0.440102] domain 0: span 0-1 level CPU
[ 0.440105] groups: 1 0
[ 0.440174] net_namespace: 776 bytes
[ 0.440174] Booting paravirtualized kernel on bare hardware
[ 0.440385] Time: 7:09:53 Date: 05/06/09
[ 0.440385] regulator: core version 0.5
[ 0.440385] NET: Registered protocol family 16
[ 0.440385] EISA bus registered
[ 0.440385] ACPI: bus type pci registered
[ 0.440385] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory
Controller Hub without MMCONFIG support.
[ 0.444161] PCI: Using configuration type 1 for base access
[ 0.445340] ACPI: EC: Look up EC in DSDT
[ 0.450341] ACPI: Interpreter enabled
[ 0.450347] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.450374] ACPI: Using IOAPIC for interrupt routing
[ 0.455411] ACPI: No dock devices found.
[ 0.455425] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.455545] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.455550] pci 0000:00:01.0: PME# disabled
[ 0.455625] pci 0000:00:1b.0: reg 10 64bit mmio: [0x92100000-0x92103fff]
[ 0.455659] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.455664] pci 0000:00:1b.0: PME# disabled
[ 0.455718] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.455723] pci 0000:00:1c.0: PME# disabled
[ 0.455780] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.455784] pci 0000:00:1c.2: PME# disabled
[ 0.455840] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.455845] pci 0000:00:1c.3: PME# disabled
[ 0.455901] pci 0000:00:1d.0: reg 20 io port: [0x2080-0x209f]
[ 0.455956] pci 0000:00:1d.1: reg 20 io port: [0x2060-0x207f]
[ 0.456022] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
[ 0.456078] pci 0000:00:1d.3: reg 20 io port: [0x2020-0x203f]
[ 0.456138] pci 0000:00:1d.7: reg 10 32bit mmio: [0x92104000-0x921043ff]
[ 0.456183] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.456188] pci 0000:00:1d.7: PME# disabled
[ 0.456324] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.456331] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
[ 0.456335] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.456368] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.456376] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.456384] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.456391] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.456399] pci 0000:00:1f.1: reg 20 io port: [0x20b0-0x20bf]
[ 0.456444] pci 0000:00:1f.2: reg 10 io port: [0x20c8-0x20cf]
[ 0.456452] pci 0000:00:1f.2: reg 14 io port: [0x20e4-0x20e7]
[ 0.456459] pci 0000:00:1f.2: reg 18 io port: [0x20c0-0x20c7]
[ 0.456466] pci 0000:00:1f.2: reg 1c io port: [0x20e0-0x20e3]
[ 0.456473] pci 0000:00:1f.2: reg 20 io port: [0x20a0-0x20af]
[ 0.456493] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.456498] pci 0000:00:1f.2: PME# disabled
[ 0.456549] pci 0000:00:1f.3: reg 20 io port: [0x2000-0x201f]
[ 0.456609] pci 0000:01:00.0: reg 10 32bit mmio: [0x91000000-0x91ffffff]
[ 0.456621] pci 0000:01:00.0: reg 14 64bit mmio: [0x80000000-0x8fffffff]
[ 0.456632] pci 0000:01:00.0: reg 1c 64bit mmio: [0x90000000-0x90ffffff]
[ 0.456643] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 0.456700] pci 0000:00:01.0: bridge 32bit mmio: [0x90000000-0x91ffffff]
[ 0.456707] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x8fffffff]
[ 0.456757] pci 0000:00:1c.0: bridge 32bit mmio: [0x92200000-0x922fffff]
[ 0.456811] pci 0000:00:1c.2: bridge 32bit mmio: [0x92300000-0x923fffff]
[ 0.456866] pci 0000:00:1c.3: bridge 32bit mmio: [0x92400000-0x924fffff]
[ 0.456912] pci 0000:05:01.0: reg 10 32bit mmio: [0x92005800-0x920058ff]
[ 0.456921] pci 0000:05:01.0: reg 14 io port: [0x1140-0x1147]
[ 0.456929] pci 0000:05:01.0: reg 18 io port: [0x1000-0x10ff]
[ 0.456964] pci 0000:05:01.0: supports D2
[ 0.456966] pci 0000:05:01.0: PME# supported from D2 D3hot D3cold
[ 0.456971] pci 0000:05:01.0: PME# disabled
[ 0.457016] pci 0000:05:05.0: reg 10 32bit mmio: [0x92005000-0x920057ff]
[ 0.457024] pci 0000:05:05.0: reg 14 32bit mmio: [0x92000000-0x92003fff]
[ 0.457065] pci 0000:05:05.0: supports D1 D2
[ 0.457068] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.457073] pci 0000:05:05.0: PME# disabled
[ 0.457114] pci 0000:05:08.0: reg 10 32bit mmio: [0x92004000-0x92004fff]
[ 0.457122] pci 0000:05:08.0: reg 14 io port: [0x1100-0x113f]
[ 0.457161] pci 0000:05:08.0: supports D1 D2
[ 0.457163] pci 0000:05:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457168] pci 0000:05:08.0: PME# disabled
[ 0.457209] pci 0000:00:1e.0: transparent bridge
[ 0.457214] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
[ 0.457219] pci 0000:00:1e.0: bridge 32bit mmio: [0x92000000-0x920fffff]
[ 0.457250] bus 00 -> node 0
[ 0.457257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.457689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.458181] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.458339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.458495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.461951] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.462100] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.462245] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.462390] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.462535] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.462681] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0,
disabled.
[ 0.462828] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.462973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.463189] ACPI: WMI: Mapper loaded
[ 0.463244] SCSI subsystem initialized
[ 0.463244] libata version 3.00 loaded.
[ 0.463244] usbcore: registered new interface driver usbfs
[ 0.463244] usbcore: registered new interface driver hub
[ 0.463244] usbcore: registered new device driver usb
[ 0.463244] PCI: Using ACPI for IRQ routing
[ 0.468013] Bluetooth: Core ver 2.13
[ 0.468031] NET: Registered protocol family 31
[ 0.468031] Bluetooth: HCI device and connection manager initialized
[ 0.468031] Bluetooth: HCI socket layer initialized
[ 0.468031] NET: Registered protocol family 8
[ 0.468031] NET: Registered protocol family 20
[ 0.468046] NetLabel: Initializing
[ 0.468048] NetLabel: domain hash size = 128
[ 0.468050] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.468066] NetLabel: unlabeled traffic allowed by default
[ 0.468159] hpet clockevent registered
[ 0.468164] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.468169] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.468175] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.472073] AppArmor: AppArmor Filesystem Enabled
[ 0.480013] pnp: PnP ACPI init
[ 0.480030] ACPI: bus type pnp registered
[ 0.483591] pnp: PnP ACPI: found 12 devices
[ 0.483594] ACPI: ACPI bus type pnp unregistered
[ 0.483598] PnPBIOS: Disabled by ACPI PNP
[ 0.483611] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.483614] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 0.483618] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.483621] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.483624] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.483627] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.483630] system 00:01: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.483633] system 00:01: iomem range 0xc0000-0xdffff could not be reserved
[ 0.483637] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.483646] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.483650] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.483653] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.518409] pci 0000:01:00.0: BAR 6: can't allocate mem resource
[0x90000000-0x8fffffff]
[ 0.518413] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.518416] pci 0000:00:01.0: IO window: disabled
[ 0.518421] pci 0000:00:01.0: MEM window: 0x90000000-0x91ffffff
[ 0.518425] pci 0000:00:01.0: PREFETCH window:
0x00000080000000-0x0000008fffffff
[ 0.518432] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.518434] pci 0000:00:1c.0: IO window: disabled
[ 0.518439] pci 0000:00:1c.0: MEM window: 0x92200000-0x922fffff
[ 0.518444] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.518451] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.518453] pci 0000:00:1c.2: IO window: disabled
[ 0.518459] pci 0000:00:1c.2: MEM window: 0x92300000-0x923fffff
[ 0.518463] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.518470] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[ 0.518472] pci 0000:00:1c.3: IO window: disabled
[ 0.518478] pci 0000:00:1c.3: MEM window: 0x92400000-0x924fffff
[ 0.518483] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.518490] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.518494] pci 0000:00:1e.0: IO window: 0x1000-0x1fff
[ 0.518500] pci 0000:00:1e.0: MEM window: 0x92000000-0x920fffff
[ 0.518504] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.518521] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.518525] pci 0000:00:01.0: setting latency timer to 64
[ 0.518536] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.518541] pci 0000:00:1c.0: setting latency timer to 64
[ 0.518551] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.518556] pci 0000:00:1c.2: setting latency timer to 64
[ 0.518566] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.518571] pci 0000:00:1c.3: setting latency timer to 64
[ 0.518578] pci 0000:00:1e.0: setting latency timer to 64
[ 0.518583] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.518586] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.518588] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.518591] bus: 01 index 1 mmio: [0x90000000-0x91ffffff]
[ 0.518593] bus: 01 index 2 mmio: [0x80000000-0x8fffffff]
[ 0.518595] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.518598] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.518600] bus: 02 index 1 mmio: [0x92200000-0x922fffff]
[ 0.518602] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.518604] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.518606] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.518609] bus: 03 index 1 mmio: [0x92300000-0x923fffff]
[ 0.518611] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.518613] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.518615] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.518617] bus: 04 index 1 mmio: [0x92400000-0x924fffff]
[ 0.518619] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.518622] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.518624] bus: 05 index 0 io port: [0x1000-0x1fff]
[ 0.518627] bus: 05 index 1 mmio: [0x92000000-0x920fffff]
[ 0.518629] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.518631] bus: 05 index 3 io port: [0x00-0xffff]
[ 0.518633] bus: 05 index 4 mmio: [0x000000-0xffffffff]
[ 0.518642] NET: Registered protocol family 2
[ 0.532076] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.532414] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.532764] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.532937] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.532940] TCP reno registered
[ 0.540095] NET: Registered protocol family 1
[ 0.540247] checking if image is initramfs... it is
[ 0.968646] Switched to high resolution mode on CPU 1
[ 0.972021] Switched to high resolution mode on CPU 0
[ 1.130391] Freeing initrd memory: 7316k freed
[ 1.130600] cpufreq: No nForce2 chipset.
[ 1.130753] audit: initializing netlink socket (disabled)
[ 1.130774] type=2000 audit(1241593793.128:1): initialized
[ 1.139072] highmem bounce pool size: 64 pages
[ 1.139079] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.140634] VFS: Disk quotas dquot_6.5.1
[ 1.140707] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.141483] fuse init (API version 7.10)
[ 1.141589] msgmni has been set to 1697
[ 1.141817] alg: No test for stdrng (krng)
[ 1.141838] io scheduler noop registered
[ 1.141841] io scheduler anticipatory registered
[ 1.141844] io scheduler deadline registered
[ 1.141863] io scheduler cfq registered (default)
[ 1.142079] pci 0000:01:00.0: Boot video device
[ 1.142106] pci 0000:05:08.0: Firmware left e100 interrupts enabled;
disabling
[ 1.144113] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.144156] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.144186] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.144199] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.144263] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.144300] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.144329] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.144343] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.144360] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.144428] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.144465] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.144493] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[ 1.144518] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.144537] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.144605] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.144643] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.144671] pcieport-driver 0000:00:1c.3: irq 2300 for MSI/MSI-X
[ 1.144685] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.144702] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.144784] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.144888] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.145046] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.145050] ACPI: Power Button (FF) [PWRF]
[ 1.145109] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.145117] ACPI: Sleep Button (CM) [SLPB]
[ 1.145377] processor ACPI_CPU:00: registered as cooling_device0
[ 1.145429] processor ACPI_CPU:01: registered as cooling_device1
[ 1.146909] isapnp: Scanning for PnP cards...
[ 1.498565] isapnp: No Plug & Play device found
[ 1.504657] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.504759] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.505223] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.506187] brd: module loaded
[ 1.506624] loop: module loaded
[ 1.506708] Fixed MDIO Bus: probed
[ 1.506715] PPP generic driver version 2.4.2
[ 1.506783] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 1.506822] Driver 'sd' needs updating - please use bus_type methods
[ 1.506836] Driver 'sr' needs updating - please use bus_type methods
[ 1.506925] ata_piix 0000:00:1f.1: version 2.12
[ 1.506936] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.506977] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.507056] scsi0 : ata_piix
[ 1.507161] scsi1 : ata_piix
[ 1.507929] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20b0 irq 14
[ 1.507933] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20b8 irq 15
[ 1.864353] ata1.00: ATAPI: SONY DVD RW DW-G120A, MYS2, max UDMA/66
[ 1.864398] ata1.01: ATAPI: SONY DVD-ROM DDU1615, FYS2, max UDMA/33
[ 1.864430] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.896304] ata1.00: configured for UDMA/33
[ 1.912302] ata1.01: configured for UDMA/33
[ 1.913023] ata2: port disabled. ignoring.
[ 1.913928] scsi 0:0:0:0: CD-ROM SONY DVD RW DW-G120A MYS2
PQ: 0 ANSI: 5
[ 1.918029] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 1.918033] Uniform CD-ROM driver Revision: 3.20
[ 1.918172] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.918242] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.918781] scsi 0:0:1:0: CD-ROM SONY DVD-ROM DDU1615 FYS2
PQ: 0 ANSI: 5
[ 1.920623] sr1: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray
[ 1.920699] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1.920751] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.920784] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.920789] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.920839] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.920911] scsi2 : ata_piix
[ 1.920988] scsi3 : ata_piix
[ 1.921150] ata3: SATA max UDMA/133 cmd 0x20c8 ctl 0x20e4 bmdma 0x20a0 irq 19
[ 1.921153] ata4: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e0 bmdma 0x20a8 irq 19
[ 2.084327] ata3.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
[ 2.084331] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.092341] ata3.00: configured for UDMA/133
[ 2.256319] ata4.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
[ 2.256322] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.264346] ata4.00: configured for UDMA/133
[ 2.264439] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10
PQ: 0 ANSI: 5
[ 2.264561] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250
GB/232 GiB)
[ 2.264584] sd 2:0:0:0: [sda] Write Protect is off
[ 2.264587] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.264625] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.264697] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250
GB/232 GiB)
[ 2.264718] sd 2:0:0:0: [sda] Write Protect is off
[ 2.264721] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.264758] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.264762] sda: sda1 sda2 sda3
[ 2.292857] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.292907] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.293002] scsi 3:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10
PQ: 0 ANSI: 5
[ 2.293115] sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250
GB/232 GiB)
[ 2.293136] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.293139] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.293176] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.293242] sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250
GB/232 GiB)
[ 2.293263] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.293267] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.293303] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.293307] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > sdb4
[ 2.332825] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.332873] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.333724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.333751] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.333780] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.333785] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.333861] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 2.337773] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.337780] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 2.337795] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x92104000
[ 2.352013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.352102] usb usb1: configuration #1 chosen from 1 choice
[ 2.352140] hub 1-0:1.0: USB hub found
[ 2.352151] hub 1-0:1.0: 8 ports detected
[ 2.352290] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.352310] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.352341] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.352348] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.352352] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.352405] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 2.352430] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
[ 2.352525] usb usb2: configuration #1 chosen from 1 choice
[ 2.352558] hub 2-0:1.0: USB hub found
[ 2.352567] hub 2-0:1.0: 2 ports detected
[ 2.352669] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.352676] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.352679] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.352734] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 2.352758] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[ 2.352845] usb usb3: configuration #1 chosen from 1 choice
[ 2.352881] hub 3-0:1.0: USB hub found
[ 2.352894] hub 3-0:1.0: 2 ports detected
[ 2.353001] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.353008] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.353011] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.353064] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 2.353096] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 2.353182] usb usb4: configuration #1 chosen from 1 choice
[ 2.353214] hub 4-0:1.0: USB hub found
[ 2.353222] hub 4-0:1.0: 2 ports detected
[ 2.353327] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.353334] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.353338] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.353396] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 2.353428] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[ 2.353517] usb usb5: configuration #1 chosen from 1 choice
[ 2.353552] hub 5-0:1.0: USB hub found
[ 2.353561] hub 5-0:1.0: 2 ports detected
[ 2.353714] usbcore: registered new interface driver libusual
[ 2.353758] usbcore: registered new interface driver usbserial
[ 2.353773] USB Serial support registered for generic
[ 2.353794] usbcore: registered new interface driver usbserial_generic
[ 2.353797] usbserial: USB Serial Driver core
[ 2.353856] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 2.356673] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.356682] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.360053] mice: PS/2 mouse device common for all mice
[ 2.372083] rtc_cmos 00:03: RTC can wake from S4
[ 2.372127] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.372154] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.372233] device-mapper: uevent: version 1.0.3
[ 2.372357] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
[email protected]
[ 2.372461] device-mapper: multipath: version 1.0.5 loaded
[ 2.372465] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.372567] EISA: Probing bus 0 at eisa.0
[ 2.372574] Cannot allocate resource for EISA slot 1
[ 2.372577] Cannot allocate resource for EISA slot 2
[ 2.372598] EISA: Detected 0 cards.
[ 2.372665] cpuidle: using governor ladder
[ 2.372669] cpuidle: using governor menu
[ 2.373339] TCP cubic registered
[ 2.373432] NET: Registered protocol family 10
[ 2.373989] lo: Disabled Privacy Extensions
[ 2.374430] NET: Registered protocol family 17
[ 2.374452] Bluetooth: L2CAP ver 2.11
[ 2.374455] Bluetooth: L2CAP socket layer initialized
[ 2.374459] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.374461] Bluetooth: SCO socket layer initialized
[ 2.374500] Bluetooth: RFCOMM socket layer initialized
[ 2.374507] Bluetooth: RFCOMM TTY layer initialized
[ 2.374510] Bluetooth: RFCOMM ver 1.10
[ 2.374566] Using IPI No-Shortcut mode
[ 2.374668] registered taskstats version 1
[ 2.374802] Magic number: 9:798:166
[ 2.374869] rtc_cmos 00:03: setting system clock to 2009-05-06 07:09:55 UTC
(1241593795)
[ 2.374873] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.374875] EDD information not available.
[ 2.375200] Freeing unused kernel memory: 532k freed
[ 2.375368] Write protecting the kernel text: 4128k
[ 2.375430] Write protecting the kernel read-only data: 1532k
[ 2.392171] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
[ 2.686394] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 2.686399] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.686456] e100 0000:05:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.706655] e100 0000:05:08.0: PME# disabled
[ 2.706899] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 2.708594] e100: eth0: e100_probe: addr 0x92004000, irq 20, MAC addr
00:16:76:21:01:e1
[ 2.708626] ohci1394 0000:05:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.758404] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
MMIO=[92005000-920057ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.838286] usb 1-2: configuration #1 chosen from 1 choice
[ 2.838607] hub 1-2:1.0: USB hub found
[ 2.838948] hub 1-2:1.0: 4 ports detected
[ 2.948528] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 3.083429] usb 1-3: configuration #1 chosen from 1 choice
[ 3.196033] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 3.214112] PM: Starting manual resume from disk
[ 3.214116] PM: Resume from partition 8:3
[ 3.214118] PM: Checking hibernation image.
[ 3.214322] PM: Resume from disk failed.
[ 3.242566] kjournald starting. Commit interval 5 seconds
[ 3.242584] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.339787] usb 1-5: configuration #1 chosen from 1 choice
[ 3.961133] Initializing USB Mass Storage driver...
[ 3.961287] scsi4 : SCSI emulation for USB Mass Storage devices
[ 3.961382] usb-storage: device found at 4
[ 3.961385] usb-storage: waiting for device to settle before scanning
[ 3.961396] usbcore: registered new interface driver usb-storage
[ 3.961400] USB Mass Storage support registered.
[ 4.036150] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00902700019e71af]
[ 8.960497] usb-storage: device scan complete
[ 8.964103] scsi 4:0:0:0: Direct-Access USB2.0 CF CardReader 9144
PQ: 0 ANSI: 0
[ 8.967717] scsi 4:0:0:1: Direct-Access USB2.0 SM CardReader 9144
PQ: 0 ANSI: 0
[ 8.971342] scsi 4:0:0:2: Direct-Access USB2.0 SD CardReader 9144
PQ: 0 ANSI: 0
[ 8.974967] scsi 4:0:0:3: Direct-Access USB2.0 MS CardReader 9144
PQ: 0 ANSI: 0
[ 8.976557] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 8.976632] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 8.977772] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 8.977826] sd 4:0:0:1: Attached scsi generic sg5 type 0
[ 8.979021] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 8.979077] sd 4:0:0:2: Attached scsi generic sg6 type 0
[ 8.980273] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 8.980326] sd 4:0:0:3: Attached scsi generic sg7 type 0
[ 9.887668] udev: starting version 141
[ 10.036270] parport_pc 00:07: reported by Plug and Play ACPI
[ 10.036330] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
[ 10.072073] parport0: Printer, Samsung ML-1740
[ 10.108042] Linux agpgart interface v0.103
[ 10.359044] intel_rng: Firmware space is locked read-only. If you can't or
[ 10.359046] intel_rng: don't want to disable this in firmware setup, and if
[ 10.359047] intel_rng: you are certain that your system has a functional
[ 10.359049] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 10.394045] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid
0x04A9 pid 0x1709
[ 10.394074] usbcore: registered new interface driver usblp
[ 10.886548] nvidia: module license 'NVIDIA' taints kernel.
[ 10.910701] ppdev: user-space parallel port driver
[ 11.141213] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.141223] nvidia 0000:01:00.0: setting latency timer to 64
[ 11.141682] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23
14:59:10 PST 2009
[ 11.239371] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 11.303672] iTCO_vendor_support: vendor-support=0
[ 11.305463] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 11.305635] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2,
TCOBASE=0x0460)
[ 11.305716] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.385650] synaptics was reset on resume, see synaptics_resume_reset if you
have trouble on resume
[ 11.647606] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 11.647690] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.852065] lp0: using parport0 (interrupt-driven).
[ 11.860618] psmouse serio1: ID: 10 00 64<6>Adding 4819492k swap on
/dev/sda3. Priority:-1 extents:1 across:4819492k
[ 12.058738] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 12.059051] EXT3 FS on sda2, internal journal
[ 12.482676] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
[ 13.996715] type=1505 audit(1241611807.121:2): operation="profile_load"
name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2183
[ 14.054865] type=1505 audit(1241611807.177:3): operation="profile_load"
name="/sbin/dhclient-script" name2="default" pid=2187
[ 14.054972] type=1505 audit(1241611807.177:4): operation="profile_load"
name="/sbin/dhclient3" name2="default" pid=2187
[ 14.055019] type=1505 audit(1241611807.177:5): operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2187
[ 14.055062] type=1505 audit(1241611807.177:6): operation="profile_load"
name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2187
[ 14.125712] type=1505 audit(1241611807.249:7): operation="profile_load"
name="/usr/bin/freshclam" name2="default" pid=2194
[ 14.272591] type=1505 audit(1241611807.397:8): operation="profile_load"
name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2198
[ 14.272759] type=1505 audit(1241611807.397:9): operation="profile_load"
name="/usr/sbin/cupsd" name2="default" pid=2198
[ 14.303510] type=1505 audit(1241611807.425:10): operation="profile_load"
name="/usr/sbin/tcpdump" name2="default" pid=2202
[ 20.822004] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.822009] Bluetooth: BNEP filters: protocol multicast
[ 20.864453] Bridge firewalling registered
[ 26.240194] ppdev0: registered pardevice
[ 26.245811] ppdev0: unregistered pardevice
[ 26.893067] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.896120] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 26.899233] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 37.120008] eth0: no IPv6 routers present
[ 77.764034] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 77.897886] usb 1-8: configuration #1 chosen from 1 choice
[ 77.924076] scsi5 : SCSI emulation for USB Mass Storage devices
[ 77.930129] usb-storage: device found at 5
[ 77.930133] usb-storage: waiting for device to settle before scanning
[ 82.928209] usb-storage: device scan complete
[ 82.929569] scsi 5:0:0:0: Direct-Access USB 2.0 Flash Disk 1100
PQ: 0 ANSI: 0 CCS
[ 82.933300] sd 5:0:0:0: [sdg] 3963904 512-byte hardware sectors: (2.02
GB/1.88 GiB)
[ 82.934294] sd 5:0:0:0: [sdg] Write Protect is off
[ 82.934298] sd 5:0:0:0: [sdg] Mode Sense: 43 00 00 00
[ 82.934301] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[ 82.939676] sd 5:0:0:0: [sdg] 3963904 512-byte hardware sectors: (2.02
GB/1.88 GiB)
[ 82.941426] sd 5:0:0:0: [sdg] Write Protect is off
[ 82.941431] sd 5:0:0:0: [sdg] Mode Sense: 43 00 00 00
[ 82.941434] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[ 82.941440] sdg: sdg1
[ 82.996353] sd 5:0:0:0: [sdg] Attached SCSI removable disk
[ 82.996446] sd 5:0:0:0: Attached scsi generic sg8 type 0
[ 88.340016] usb 1-7: new high speed USB device using ehci_hcd and address 6
[ 88.478924] usb 1-7: configuration #1 chosen from 1 choice
[ 88.479287] scsi6 : SCSI emulation for USB Mass Storage devices
[ 88.479854] usb-storage: device found at 6
[ 88.479857] usb-storage: waiting for device to settle before scanning
[ 93.476229] usb-storage: device scan complete
[ 93.476713] scsi 6:0:0:0: Direct-Access Flash Drive SK_USB20 1.00
PQ: 0 ANSI: 2
[ 93.479564] sd 6:0:0:0: [sdh] 7942144 512-byte hardware sectors: (4.06
GB/3.78 GiB)
[ 93.488462] sd 6:0:0:0: [sdh] Write Protect is off
[ 93.488467] sd 6:0:0:0: [sdh] Mode Sense: 23 00 00 00
[ 93.488471] sd 6:0:0:0: [sdh] Assuming drive cache: write through
[ 93.492117] sd 6:0:0:0: [sdh] 7942144 512-byte hardware sectors: (4.06
GB/3.78 GiB)
[ 93.492740] sd 6:0:0:0: [sdh] Write Protect is off
[ 93.492744] sd 6:0:0:0: [sdh] Mode Sense: 23 00 00 00
[ 93.492747] sd 6:0:0:0: [sdh] Assuming drive cache: write through
[ 93.492752] sdh: sdh1
[ 93.600703] sd 6:0:0:0: [sdh] Attached SCSI removable disk
[ 93.600798] sd 6:0:0:0: Attached scsi generic sg9 type 0
[ 217.992304] usb 1-8: USB disconnect, address 5
[ 218.124027] usb 1-7: USB disconnect, address 6
[ 254.620016] usb 1-8: new high speed USB device using ehci_hcd and address 7
[ 255.573364] usb 1-8: configuration #1 chosen from 1 choice
[ 255.574057] scsi7 : SCSI emulation for USB Mass Storage devices
[ 255.577130] usb-storage: device found at 7
[ 255.577133] usb-storage: waiting for device to settle before scanning
[ 260.576495] usb-storage: device scan complete
[ 260.577475] scsi 7:0:0:0: Direct-Access Sony Storage Media 0100
PQ: 0 ANSI: 0 CCS
[ 260.593810] sd 7:0:0:0: [sdg] 15728640 512-byte hardware sectors: (8.05
GB/7.50 GiB)
[ 260.600024] sd 7:0:0:0: [sdg] Write Protect is off
[ 260.600029] sd 7:0:0:0: [sdg] Mode Sense: 43 00 00 00
[ 260.600032] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 260.602203] sd 7:0:0:0: [sdg] 15728640 512-byte hardware sectors: (8.05
GB/7.50 GiB)
[ 260.602949] sd 7:0:0:0: [sdg] Write Protect is off
[ 260.602952] sd 7:0:0:0: [sdg] Mode Sense: 43 00 00 00
[ 260.602955] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 260.602959] sdg: sdg1 sdg2
[ 260.603744] sd 7:0:0:0: [sdg] Attached SCSI removable disk
[ 260.603839] sd 7:0:0:0: Attached scsi generic sg8 type 0
[ 308.665450] usb 1-8: USB disconnect, address 7
[86621.600021] usb 1-8: new high speed USB device using ehci_hcd and address 8
[86622.549178] usb 1-8: configuration #1 chosen from 1 choice
[86622.549713] scsi8 : SCSI emulation for USB Mass Storage devices
[86622.549808] usb-storage: device found at 8
[86622.549812] usb-storage: waiting for device to settle before scanning
[86627.549013] usb-storage: device scan complete
[86627.549993] scsi 8:0:0:0: Direct-Access Sony Storage Media 0100
PQ: 0 ANSI: 0 CCS
[86627.568614] sd 8:0:0:0: [sdg] 15728640 512-byte hardware sectors: (8.05
GB/7.50 GiB)
[86627.570452] sd 8:0:0:0: [sdg] Write Protect is off
[86627.570456] sd 8:0:0:0: [sdg] Mode Sense: 43 00 00 00
[86627.570459] sd 8:0:0:0: [sdg] Assuming drive cache: write through
[86627.577095] sd 8:0:0:0: [sdg] 15728640 512-byte hardware sectors: (8.05
GB/7.50 GiB)
[86627.577839] sd 8:0:0:0: [sdg] Write Protect is off
[86627.577843] sd 8:0:0:0: [sdg] Mode Sense: 43 00 00 00
[86627.577846] sd 8:0:0:0: [sdg] Assuming drive cache: write through
[86627.577851] sdg: sdg1 sdg2
[86627.578874] sd 8:0:0:0: [sdg] Attached SCSI removable disk
[86627.579094] sd 8:0:0:0: Attached scsi generic sg8 type 0
[86854.084021] usb 1-7: new high speed USB device using ehci_hcd and address 9
[86854.218301] usb 1-7: configuration #1 chosen from 1 choice
[86854.218670] scsi9 : SCSI emulation for USB Mass Storage devices
[86854.219230] usb-storage: device found at 9
[86854.219233] usb-storage: waiting for device to settle before scanning
[86859.216336] usb-storage: device scan complete
[86859.217692] scsi 9:0:0:0: Direct-Access USB 2.0 Flash Disk 1100
PQ: 0 ANSI: 0 CCS
[86859.221667] sd 9:0:0:0: [sdh] 3963904 512-byte hardware sectors: (2.02
GB/1.88 GiB)
[86859.222785] sd 9:0:0:0: [sdh] Write Protect is off
[86859.222789] sd 9:0:0:0: [sdh] Mode Sense: 43 00 00 00
[86859.222792] sd 9:0:0:0: [sdh] Assuming drive cache: write through
[86859.227295] sd 9:0:0:0: [sdh] 3963904 512-byte hardware sectors: (2.02
GB/1.88 GiB)
[86859.229422] sd 9:0:0:0: [sdh] Write Protect is off
[86859.229427] sd 9:0:0:0: [sdh] Mode Sense: 43 00 00 00
[86859.229430] sd 9:0:0:0: [sdh] Assuming drive cache: write through
[86859.229435] sdh: sdh1
[86859.289042] sd 9:0:0:0: [sdh] Attached SCSI removable disk
[86859.289147] sd 9:0:0:0: Attached scsi generic sg9 type 0
Thanks, thanks, thanks for your help.
--
cannot mount usb sticks after upgrade
https://bugs.launchpad.net/bugs/372496
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
