Hi Pedro, I think it must have been the media ie it did not like the CDRs I was uusing although I tried two types -When I used a DVD-R it burned it OK.
Thanks Paul > Date: Mon, 11 May 2009 14:22:08 +0000 > From: [email protected] > To: [email protected] > Subject: [Bug 374190] Re: Unable to burn CD -cannot write 'lead in' > > Thanks for your report, could you run brasero from the command line as: > brasero --brasero-media-debug &> brasero-debug.txt perform the operation > to reproduce the bug and attach the resulting file to the report?. > Thanks in advance > > ** Changed in: brasero (Ubuntu) > Importance: Undecided => Low > > ** Changed in: brasero (Ubuntu) > Status: New => Incomplete > > ** Changed in: brasero (Ubuntu) > Assignee: (unassigned) => Ubuntu Desktop Bugs (desktop-bugs) > > -- > Unable to burn CD -cannot write 'lead in' > https://bugs.launchpad.net/bugs/374190 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “brasero” source package in Ubuntu: Incomplete > > Bug description: > I have created the iso image but keep getting an error message that the > burner cannot write the Lead in > > Suggested it cannot write with the current set of plug ins. > > Using 9.04 upgrade to Super Ubuntu. > > /home/paul/brasero-session.log > Checking session consistency (brasero_burn_check_session_consistency > burn.c:1905) > BraseroBurnURI called brasero_job_get_action > BraseroBurnURI called brasero_job_get_action > BraseroBurnURI called brasero_job_set_output_size_for_current_track > BraseroBurnURI stopping > BraseroBurnURI called brasero_job_get_action > BraseroBurnURI called brasero_job_get_session_output_size > BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_VA3KTU.bin toc = > none > BraseroBurnURI called brasero_job_get_action > BraseroBurnURI called brasero_job_get_current_track > BraseroBurnURI called brasero_job_get_input_type > BraseroBurnURI burn:// URI found burn:///brasero-0.iso > BraseroBurnURI called brasero_job_set_current_action > BraseroBurnURI called brasero_job_get_current_track > BraseroBurnURI no burn:// URI found > BraseroBurnURI called brasero_job_add_track > BraseroBurnURI called brasero_job_get_action > BraseroBurnURI Finished track successfully > BraseroBurnURI stopping > BraseroWodim called brasero_job_get_action > BraseroWodim getting varg > BraseroWodim called brasero_job_get_action > BraseroWodim got varg: > BraseroWodim deactivating > BraseroWodim called brasero_job_get_action > BraseroWodim getting varg > BraseroWodim called brasero_job_get_action > BraseroWodim called brasero_job_get_device > BraseroWodim called brasero_job_get_flags > BraseroWodim called brasero_job_get_speed > BraseroWodim called brasero_job_get_flags > BraseroWodim called brasero_job_get_input_type > BraseroWodim called brasero_job_get_fd_in > BraseroWodim called brasero_job_get_current_track > BraseroWodim called brasero_job_set_current_action > BraseroWodim got varg: > wodim > -v > dev=/dev/sr0 > speed=8 > driveropts=burnfree > -dao > fs=16m > -data > -nopad > /home/paul/brasero-0.iso > BraseroWodim Launching command > BraseroWodim called brasero_job_get_fd_out > BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise > RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: devname: '/dev/sr0' > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: scsibus: -2 target: -2 lun: -2 > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: Linux sg driver version: 3.5.27 > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: Wodim version: 1.1.9 > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: SCSI buffer size: 64512 > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment > variable if device > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: communication breaks or freezes immediately after that. > BraseroWodim called brasero_job_get_flags > BraseroWodim stdout: TOC Type: 1 = CD-ROM > BraseroWodim stderr: Speed set to 1412 KB/s > BraseroWodim called brasero_job_get_flags > BraseroWodim stdout: Driveropts: 'burnfree' > BraseroWodim stdout: Device type : Removable CD-ROM > BraseroWodim stdout: Version : 5 > BraseroWodim stdout: Response Format: 2 > BraseroWodim stdout: Capabilities : > BraseroWodim stdout: Vendor_info : 'TSSTcorp' > BraseroWodim stdout: Identification : 'DVD+-RW TS-H653A' > BraseroWodim stdout: Revision : 'D500' > BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW. > BraseroWodim stdout: Current: 0x0009 (CD-R) > BraseroWodim stdout: Profile: 0x002B (DVD+R/DL) > BraseroWodim stdout: Profile: 0x001B (DVD+R) > BraseroWodim stdout: Profile: 0x001A (DVD+RW) > BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording) > BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite) > BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording) > BraseroWodim stdout: Profile: 0x0010 (DVD-ROM) > BraseroWodim stdout: Profile: 0x000A (CD-RW) > BraseroWodim stdout: Profile: 0x0009 (CD-R) (current) > BraseroWodim stdout: Profile: 0x0008 (CD-ROM) > BraseroWodim stdout: Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > BraseroWodim stdout: Driver flags : MMC-3 SWABAUDIO BURNFREE > BraseroWodim stdout: Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R > RAW/R16 RAW/R96P RAW/R96R > BraseroWodim stdout: Drive buf size : 1579776 = 1542 KB > BraseroWodim stdout: FIFO size : 16777216 = 16384 KB > BraseroWodim stdout: Track 01: data 208 MB > BraseroWodim stdout: Total size: 238 MB (23:40.06) = 106505 sectors > BraseroWodim stdout: Lout start: 239 MB (23:42/05) = 106505 sectors > BraseroWodim stdout: Current Secsize: 2048 > BraseroWodim stdout: ATIP info from disk: > BraseroWodim stdout: Indicated writing power: 5 > BraseroWodim stdout: Is not unrestricted > BraseroWodim stdout: Is not erasable > BraseroWodim stdout: Disk sub type: Medium Type B, low Beta category (B-) > (4) > BraseroWodim stdout: ATIP start of lead in: -11607 (97:27/18) > BraseroWodim stdout: ATIP start of lead out: 359849 (79:59/74) > BraseroWodim stdout: Disk type: Short strategy type (Phthalocyanine or > similar) > BraseroWodim stdout: Manuf. index: 18 > BraseroWodim stdout: Manufacturer: Plasmon Data systems Ltd. > BraseroWodim stdout: Blocks total: 359849 Blocks current: 359849 Blocks > remaining: 253344 > BraseroWodim stdout: Starting to write CD/DVD at speed 8.0 in real SAO mode > for single session. > BraseroWodim stdout: Last chance to quit, starting real write in 4 > seconds. > BraseroWodim called brasero_job_set_dangerous > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: 3 seconds. > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: 2 seconds. > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: > BraseroWodim stdout: 1 seconds. > BraseroWodim stdout: > BraseroWodim stdout: 0 seconds. Operation starts. > BraseroWodim stdout: Waiting for reader process to fill input buffer ... > input buffer ready. > BraseroWodim stdout: Performing OPC... > BraseroWodim stdout: Sending CUE sheet... > BraseroWodim called brasero_job_get_input_type > BraseroWodim called brasero_job_set_current_action > BraseroWodim stderr: wodim: CUE sheet not accepted. Retrying with minimum > pregapsize = 1. > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: Errno: 5 (Input/output error), send_cue_sheet scsi > sendcmd: no error > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: CDB: 5D 00 00 00 00 00 00 00 20 00 > BraseroWodim called brasero_job_get_flags > BraseroWodim stdout: Writing time: 10.563s > BraseroWodim stderr: status: 0x2 (CHECK CONDITION) > BraseroWodim called brasero_job_get_flags > BraseroWodim stdout: BURN-Free was never needed. > BraseroWodim stderr: Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 > 00 00 > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: Sense Key: 0x5 Illegal Request, Segment 0 > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: Sense Code: 0x26 Qual 0x00 (invalid field in parameter > list) Fru 0x0 > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: Sense flags: Blk 0 (not valid) > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: cmd finished after 0.001s timeout 200s > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: wodim: CUE sheet still not accepted. Please try to write > in RAW (-raw96r) mode. > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: wodim: Cannot send CUE sheet. > BraseroWodim called brasero_job_get_flags > BraseroWodim stderr: wodim: Could not write Lead-in. > BraseroWodim called brasero_job_get_flags > BraseroWodim called brasero_job_error > BraseroWodim finished with an error > BraseroWodim asked to stop because of an error > error = 12 > message = "An error occurred while writing to disc" > BraseroWodim stopping > BraseroWodim got killed > Session error : An error occurred while writing to disc (brasero_burn_record > burn.c:2599) _________________________________________________________________ View your Twitter and Flickr updates from one place – Learn more! http://clk.atdmt.com/UKM/go/137984870/direct/01/ -- Unable to burn CD -cannot write 'lead in' https://bugs.launchpad.net/bugs/374190 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
