Hi Fumihito YOSHIDA, I think that my case is 1, because:
the problem could be related with wifi firmware bug, I don't have corruption with wired connection, if I use apt-get update and apt-get dist-upgrade and I'm on wifi connection I have error on ext3 partition I have check: HDD ( with seatool test al test passed ), Memory ( also check memory and no problem was found ) I have that on dmesg [ 44.001108] Clocksource tsc unstable (delta = -76736091 ns) [ 249.909549] process `skype.real' is using obsolete setsockopt SO_BSDCOMPAT [ 2014.282976] CE: hpet increasing min_delta_ns to 15000 nsec [ 2754.552046] CE: hpet increasing min_delta_ns to 22500 nsec [ 4289.458793] RPC: Registered udp transport module. [ 4289.458799] RPC: Registered tcp transport module. [ 4507.716061] CE: hpet increasing min_delta_ns to 33750 nsec it could be an CPU troubles? the laptop has a week of life, is an Compal-KHLB2 2009/5/12 Fumihito YOSHIDA <[email protected]> > Hi muchasuerte, > > OMFG, this ext3 problem("ext3_free_blocks_sb: bit already cleared") > exists in some cases, > > case1) by inconsistentcy file system. > (e.g. caused by kernel crash, because kernel crash losts > "cached/buffered" ext3 operations) > > case2) by hardware troubles. > (e.g. HDD, Memory, CPU troubles) > > case3) by coding error, such as memory barrier. > > Your case is 1? or not? > > -- > disk corruption ext3_free_blocks_sb: bit already cleared for block 232785 > https://bugs.launchpad.net/bugs/209346 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “linux” source package in Ubuntu: New > Status in “linux-2.6” source package in Debian: New > > Bug description: > i booted up my computer (xeon 5130, on tyan s2696, WD raptor connected by > sata), running 64bit hardy, up to date as of yesterday. it booted ok, and i > opened a few applications (firefox, liferea). i started downloading a live > cd from the ubuntu website. > > then halfway through the download firefox pops up a message saying that it > cannot write the iso file because the disk is locked. i have a look in > nautilus and the iso file is marked as locked, i notice that the disk is > full. i try to delete some files using nautilus and get more messages about > the disk being locked. i try to open a terminal, but bash wont load. switch > to a virtual terminal, log in and run dmesg. (luckly had a usb disk mounted > so i save dmesg and syslog). > > [ 74.631330] NET: Registered protocol family 10 > [ 74.631568] lo: Disabled Privacy Extensions > [ 74.632685] ADDRCONF(NETDEV_UP): eth1: link is not ready > [ 85.124125] ath0: no IPv6 routers present > [ 85.515886] eth0: no IPv6 routers present > [ 903.875961] EXT3-fs error (device sda9): ext3_free_blocks_sb: bit > already cleared for block 232785 > [ 903.875971] Aborting journal on device sda9. > [ 903.876456] ext3_abort called. > [ 903.876459] EXT3-fs error (device sda9): ext3_journal_start_sb: Detected > aborted journal > [ 903.876462] Remounting filesystem read-only > [ 903.877537] Remounting filesystem read-only > [ 903.877819] EXT3-fs error (device sda9): ext3_free_blocks_sb: bit > already cleared for block 232786 > [ 903.878272] EXT3-fs error (device sda9): ext3_free_blocks_sb: bit > already cleared for block 232787 > [ 903.878678] EXT3-fs error (device sda9): ext3_free_blocks_sb: bit > already cleared for block 232788 > [ 903.879076] EXT3-fs error (device sda9): ext3_free_blocks_sb: bit > already cleared for block 232789 > [ 903.879477] EXT3-fs error (device sda9) in ext3_free_blocks_sb: Journal > has aborted > [ 903.879821] EXT3-fs error (device sda9) in ext3_free_blocks_sb: Journal > has aborted > [ 903.880166] EXT3-fs error (device sda9) in ext3_free_blocks_sb: Journal > has aborted > [ 903.880514] EXT3-fs error (device sda9) in ext3_free_blocks_sb: Journal > has aborted > [ 903.880868] EXT3-fs error (device sda9) in ext3_reserve_inode_write: > Journal has aborted > [ 903.880871] EXT3-fs error (device sda9) in ext3_truncate: Journal has > aborted > [ 903.881551] EXT3-fs error (device sda9) in ext3_reserve_inode_write: > Journal has aborted > [ 903.881554] EXT3-fs error (device sda9) in ext3_orphan_del: Journal has > aborted > [ 903.882238] EXT3-fs error (device sda9) in ext3_reserve_inode_write: > Journal has aborted > [ 903.934531] __journal_remove_journal_head: freeing b_committed_data > [ 903.934538] __journal_remove_journal_head: freeing b_committed_data > [ 903.934541] __journal_remove_journal_head: freeing b_committed_data > > syslog had lots of: > Mar 30 10:55:15 oberon gdmsetup[6315]: CRITICAL: Error opening file: No > such file or directory > Mar 30 10:55:40 oberon last message repeated 3 times > Mar 30 10:56:05 oberon last message repeated 2 times > Mar 30 10:56:13 oberon gdmsetup[6379]: CRITICAL: Error opening file: No > such file or directory > Mar 30 10:56:13 oberon gdmsetup[6379]: CRITICAL: Error opening file: No > such file or directory > > (i opened login screen prefs at the start of the session to turn off the > gdm sounds). > > i can provide more of dmesg and syslog if needed > > on rebooting, fsck was unable to repair the errors (but i will file that as > a separate issue). > > I have checked that all the cables were secure. > > I have checked the disk using smartcrl, it seems to be fine > > s...@oberon:~$ sudo smartctl -a /dev/sda > smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce > Allen > Home page is http://smartmontools.sourceforge.net/ > > === START OF INFORMATION SECTION === > Model Family: Western Digital Raptor family > Device Model: WDC WD1500ADFD-00NLR5 > Serial Number: WD-WMAP41915867 > Firmware Version: 21.07QR5 > User Capacity: 150,039,945,216 bytes > Device is: In smartctl database [for details use: -P show] > ATA Version is: 7 > ATA Standard is: ATA/ATAPI-7 published, ANSI INCITS 397-2005 > Local Time is: Sun Mar 30 19:13:36 2008 BST > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x82) Offline data collection activity > was completed without error. > Auto Offline Data Collection: > Enabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test has > ever > been run. > Total time to complete Offline > data collection: (4783) seconds. > Offline data collection > capabilities: (0x7b) SMART execute Offline immediate. > Auto Offline data collection on/off > support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 72) minutes. > Conveyance self-test routine > recommended polling time: ( 5) minutes. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED > WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always > - 0 > 3 Spin_Up_Time 0x0007 162 159 021 Pre-fail Always > - 4925 > 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always > - 97 > 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always > - 0 > 7 Seek_Error_Rate 0x000a 200 200 051 Old_age Always > - 0 > 9 Power_On_Hours 0x0032 099 099 000 Old_age Always > - 1440 > 10 Spin_Retry_Count 0x0012 100 253 051 Old_age Always > - 0 > 11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always > - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always > - 97 > 194 Temperature_Celsius 0x0022 106 104 000 Old_age Always > - 41 > 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always > - 0 > 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always > - 0 > 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always > - 0 > 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always > - 0 > 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline > - 0 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining LifeTime(hours) > LBA_of_first_error > # 1 Conveyance offline Completed without error 00% 1440 > - > # 2 Extended offline Completed without error 00% 1440 > - > # 3 Short offline Completed without error 00% 1439 > - > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > -- disk corruption ext3_free_blocks_sb: bit already cleared for block 232785 https://bugs.launchpad.net/bugs/209346 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
