I have a system exhibiting the same/similar symptoms.
Running a fresh install of Ubuntu 9.04 jaunty
uname -a: Linux ServerX 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03
UTC 2009 x86_64 GNU/Linux
Motherboard: SUPERMICRO MBD-H8DME-2-O
SATA card: SUPERMICRO AOC-SAT2-MV8 (Marvell Technology Group Ltd. MV88SX6081
8-port SATA II PCI-X Controller (rev 09))
The system has a SW RAID6 array made of four 1TB disks. Currently the
array is degraded and only has 3 disks to work with.
md1 : active raid6 sde1[4] sdd1[0] sdc1[2]
1953519872 blocks level 6, 64k chunk, algorithm 2 [4/2] [U_U_]
[==>..................] recovery = 10.8% (105874700/976759936)
finish=142.0min speed=102195K/sec
With the array on the PCI-X card I'm able to recreate the crash by
failing a drive and reading it to the array. Some time after 50% it will
hang and the system is unresponsive.
The system boots from RAID1 md0 two 500GB drive which is on the
motherboards controller. I was able to add a disk plugged into the PCI-X
to md0 and it would sync w/o problems.
Moving the RAID6 array to the mother boards controller the rebuild will
work w/o problems.
kpolberg mentioned adjusting stripe_cache_size.The command he posted:
echo 16384 > /sys/block/md1/md/stripe_cache_size
Looks like it helps, no crash fro 24Hrs.
If it remains stable I will try with a larger array.
Will post more info if needed.
--
mdadm with Raid5 stuck in uninterruptable sleep
https://bugs.launchpad.net/bugs/208551
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
