Public bug reported:

I/O errors when trying to access IDE disk via an USB to IDE converter
(sold as R-Driver II).

Scanning with lsusb and lsscsi my system detects the device and a /dev/sda is 
created. However the disk partitions aren't seen and I can't mount it. A simple 
od </dev/sda fails with I/O errors, usually immediately but sometimes after 
reading a few disk blocks.
I also tried booting from a live 6.06 cd and I see the same errors. 

I've successfully accessed the same IDE disk via the converter on the
same machine via windows XP and from knoppix (2.4 kernel) without issue.

>From the website at http://www.usbgeek.com/prod_detail.php?prod_id=0190
the chipset is a MYSON CENTURY, CS88186

The lsusb -vv output is

Bus 002 Device 004: ID 14cd:6600  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x14cd 
  idProduct          0x6600 
  bcdDevice            2.01
  iManufacturer           1 Super Top 
  iProduct                3 USB 2.0  IDE DEVICE    
  iSerial                 2 ???????3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

** Affects: Ubuntu
     Importance: Undecided
         Status: Unconfirmed

-- 
I/O errors with USB to IDE converter
https://launchpad.net/bugs/81059

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to