Hi, could you please post your pppd/chat config? I would like to check if I can confirm the 'runs from command line' with my configuration.
thanks Joe wrote: > Same issue with Verizon and EVDO. I can connect fine if I setup my own > pppd config file and chat script and run it from the command line. > > r...@jgarcia-laptop:/etc/ppp/peers# lsusb -v > > Bus 001 Device 004: ID 106c:3711 Curitel Communications, Inc. > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 2 Communications > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x106c Curitel Communications, Inc. > idProduct 0x3711 > bcdDevice 1.00 > iManufacturer 1 PANTECH > iProduct 2 PANTECH USB MODEM > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 113 > bNumInterfaces 4 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0x80 > (Bus Powered) > MaxPower 500mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 2 Communications > bInterfaceSubClass 2 Abstract (modem) > bInterfaceProtocol 1 AT-commands (v.25ter) > iInterface 0 > CDC Header: > bcdCDC 1.09 > CDC Call Management: > bmCapabilities 0x03 > call management > use DataInterface > bDataInterface 1 > CDC ACM: > bmCapabilities 0x0f > connection notifications > sends break > line coding and serial state > get/set/clear comm features > CDC Union: > bMasterInterface 0 > bSlaveInterface 1 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 9 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 10 CDC Data > bInterfaceSubClass 0 Unused > bInterfaceProtocol 0 > iInterface 3 Data Interface > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 2 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x89 EP 9 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x07 EP 7 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 8 Mass Storage > bInterfaceSubClass 6 SCSI > bInterfaceProtocol 80 Bulk (Zip) > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x86 EP 6 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Device Status: 0x0000 > (Bus Powered) > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 9 Hub > bDeviceSubClass 0 Unused > bDeviceProtocol 0 Full speed (or root) hub > bMaxPacketSize0 64 > idVendor 0x1d6b Linux Foundation > idProduct 0x0002 2.0 root hub > bcdDevice 2.06 > iManufacturer 3 Linux 2.6.28-13-generic ehci_hcd > iProduct 2 EHCI Host Controller > iSerial 1 0000:00:1d.7 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xe0 > Self Powered > Remote Wakeup > MaxPower 0mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 Hub > bInterfaceSubClass 0 Unused > bInterfaceProtocol 0 Full speed (or root) hub > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0004 1x 4 bytes > bInterval 12 > > >>From /var/log/daemon.log > > Jul 16 11:10:50 jgarcia-laptop NetworkManager: <info> Activation (ttyACM0) > starting connection 'Auto Mobile Broadband (CDMA) connection' > Jul 16 11:10:50 jgarcia-laptop NetworkManager: <info> (ttyACM0): device > state change: 3 -> 4 > Jul 16 11:10:50 jgarcia-laptop NetworkManager: <info> Activation (ttyACM0) > Stage 1 of 5 (Device Prepare) scheduled... > Jul 16 11:10:50 jgarcia-laptop NetworkManager: <info> Activation (ttyACM0) > Stage 1 of 5 (Device Prepare) started... > Jul 16 11:10:50 jgarcia-laptop NetworkManager: <debug> [1247757050.462919] > nm_serial_device_open(): (ttyACM0) opening device... > Jul 16 11:10:50 jgarcia-laptop NetworkManager: <info> Activation (ttyACM0) > Stage 1 of 5 (Device Prepare) complete. > Jul 16 11:10:50 jgarcia-laptop NetworkManager: <info> (ttyACM0): powering > up... > Jul 16 11:10:52 jgarcia-laptop NetworkManager: <info> Connected, Woo! > Jul 16 11:10:52 jgarcia-laptop NetworkManager: <info> Activation (ttyACM0) > Stage 2 of 5 (Device Configure) scheduled... > Jul 16 11:10:52 jgarcia-laptop NetworkManager: <info> Activation (ttyACM0) > Stage 2 of 5 (Device Configure) starting... > Jul 16 11:10:52 jgarcia-laptop NetworkManager: <info> (ttyACM0): device > state change: 4 -> 5 > Jul 16 11:10:52 jgarcia-laptop NetworkManager: <info> Starting pppd > connection > Jul 16 11:10:52 jgarcia-laptop NetworkManager: <debug> [1247757052.581620] > nm_ppp_manager_start(): Command line: /usr/sbin/pppd nodetach lock > nodefaultroute user [email protected] ttyACM0 noipdefault noauth > usepeerdns lcp-echo-failure 5 lcp-echo-interval 30 ipparam > /org/freedesktop/NetworkManager/PPP/8 plugin > /usr/lib/pppd/2.4.4/nm-pppd-plugin.so > Jul 16 11:10:52 jgarcia-laptop NetworkManager: <debug> [1247757052.677176] > nm_ppp_manager_start(): ppp started with pid 17638 > Jul 16 11:10:52 jgarcia-laptop NetworkManager: <info> Activation (ttyACM0) > Stage 2 of 5 (Device Configure) complete. > Jul 16 11:11:08 jgarcia-laptop NetworkManager: <WARN> pppd_timed_out(): > Looks like pppd didn't initialize our dbus module > Jul 16 11:11:08 jgarcia-laptop NetworkManager: <info> (ttyACM0): device > state change: 5 -> 9 > Jul 16 11:11:08 jgarcia-laptop NetworkManager: <debug> [1247757068.000613] > nm_serial_device_close(): Closing device 'ttyACM0' > Jul 16 11:11:08 jgarcia-laptop NetworkManager: <info> Marking connection > 'Auto Mobile Broadband (CDMA) connection' invalid. > Jul 16 11:11:08 jgarcia-laptop NetworkManager: <info> Activation (ttyACM0) > failed. > Jul 16 11:11:08 jgarcia-laptop NetworkManager: <info> (ttyACM0): device > state change: 9 -> 3 > Jul 16 11:11:08 jgarcia-laptop NetworkManager: <info> (ttyACM0): > deactivating device (reason: 0). > Jul 16 11:11:08 jgarcia-laptop NetworkManager: > nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' > failed > Jul 16 11:11:08 jgarcia-laptop NetworkManager: > nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' > failed > Jul 16 11:11:10 jgarcia-laptop NetworkManager: <debug> [1247757070.002100] > ensure_killed(): waiting for ppp pid 17638 to exit > Jul 16 11:11:10 jgarcia-laptop NetworkManager: <debug> [1247757070.002283] > ensure_killed(): ppp pid 17638 cleaned up > > > And /var/log/messages > > Jul 16 10:56:00 jgarcia-laptop pppd[16807]: Plugin > /usr/lib/pppd/2.4.4/nm-pppd-plugin.so loaded. > Jul 16 10:56:00 jgarcia-laptop pppd[16807]: pppd 2.4.5 started by root, uid 0 > Jul 16 10:56:00 jgarcia-laptop pppd[16807]: Using interface ppp0 > Jul 16 10:56:00 jgarcia-laptop pppd[16807]: Connect: ppp0 <--> /dev/ttyACM0 > Jul 16 10:56:01 jgarcia-laptop pppd[16807]: local IP address 97.15.131.157 > Jul 16 10:56:01 jgarcia-laptop pppd[16807]: remote IP address 66.174.121.64 > Jul 16 10:56:01 jgarcia-laptop pppd[16807]: primary DNS address 66.174.95.44 > Jul 16 10:56:01 jgarcia-laptop pppd[16807]: secondary DNS address 66.174.92.14 > Jul 16 10:56:16 jgarcia-laptop pppd[16807]: Terminating on signal 15 > Jul 16 10:56:16 jgarcia-laptop pppd[16807]: Connect time 0.3 minutes. > Jul 16 10:56:16 jgarcia-laptop pppd[16807]: Sent 0 bytes, received 0 bytes. > Jul 16 10:56:16 jgarcia-laptop pppd[16807]: Connection terminated. > Jul 16 10:56:17 jgarcia-laptop pppd[16807]: Exit. > -- Andreas Zickner Gotenstr. 2 - 71065 Sindelfingen - [email protected] - 015771968553 == Es ist ein Unterschied ob man seinen Weg kennt ... ... oder ob man ihn beschreitet -- UMTS Modem: network manager / pppd does hang up immediately after successful connect https://bugs.launchpad.net/bugs/391608 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
