Public bug reported:
Binary package hint: linux-image-2.6.24-23-server
1. lsb_release = Ubuntu 8.04.3 LTS
2. bnx2 driver from linux-image-2.6.24-23-server
3. NIC should work
4. NIC doesn't send or receive any traffic, the bnx2 module is loaded but dmesg
shows:
ADDRCONF(NETDEV_UP): eth0: link is not ready
lspci -v output of the NIC's:
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit
Ethernet (rev 20)
Subsystem: Hewlett-Packard Company NC382i Integrated Quad Port PCI
Express Gigabit Server Adapter
Flags: bus master, fast devsel, latency 0, IRQ 40
Memory at f6000000 (64-bit, non-prefetchable) [size=32M]
[virtual] Expansion ROM at e2100000 [disabled] [size=64K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3
Enable-
Capabilities: [a0] MSI-X: Enable- Mask- TabSize=8
Capabilities: [ac] Express Endpoint IRQ 0
03:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit
Ethernet (rev 20)
Subsystem: Hewlett-Packard Company NC382i Integrated Quad Port PCI
Express Gigabit Server Adapter
Flags: bus master, fast devsel, latency 0, IRQ 39
Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
[virtual] Expansion ROM at e2110000 [disabled] [size=64K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3
Enable-
Capabilities: [a0] MSI-X: Enable- Mask- TabSize=8
Capabilities: [ac] Express Endpoint IRQ 0
41:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit
Ethernet (rev 20)
Subsystem: Hewlett-Packard Company NC382i Integrated Quad Port PCI
Express Gigabit Server Adapter
Flags: bus master, fast devsel, latency 0, IRQ 34
Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
[virtual] Expansion ROM at e2600000 [disabled] [size=64K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3
Enable-
Capabilities: [a0] MSI-X: Enable- Mask- TabSize=8
Capabilities: [ac] Express Endpoint IRQ 0
41:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit
Ethernet (rev 20)
Subsystem: Hewlett-Packard Company NC382i Integrated Quad Port PCI
Express Gigabit Server Adapter
Flags: bus master, fast devsel, latency 0, IRQ 33
Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
[virtual] Expansion ROM at e2610000 [disabled] [size=64K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3
Enable-
Capabilities: [a0] MSI-X: Enable- Mask- TabSize=8
Capabilities: [ac] Express Endpoint IRQ 0
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: bcm5709 bnx2
--
BCM5709 not working in hardy heron server, eth0: link is not ready
https://bugs.launchpad.net/bugs/405876
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
