Public bug reported:
Binary package hint: linux-image-2.6.31-4-generic
can't boot my box (HP-6715 laptop, see lshw & lspci output below ) with
2.6.31-*-generic kernel.
with default boot options, the kernel output is as follows:
================================================
[ 1.083191] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084085] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084188] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084309] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084386] ata1: SATA link down (SStatus 40D0000 SControl 1)
[ 1.084487] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084591] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084711] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084814] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085020] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085123] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085244] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085346] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085450] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085574] ata1: exception Emask 0x2 SAct 0x0 SErr 0x1 action 0x6 frozen t4
[ 1.085651] ata1: SError: { RecovData }
[ 1.085744] ata1: hard resetting link
etc etc etc.....................................
================================================
...... and this lasts forever.
when adding acpi=off boot parameter, the output is as follows:
================================================
[ 1.083191] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084085] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084188] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084309] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084386] ata1: SATA link down (SStatus 40D0000 SControl 1)
[ 1.084487] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084591] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084711] ata1: illegal qc_active transition (00000000->00400040)
[ 1.084814] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085020] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085123] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085244] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085346] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085450] ata1: illegal qc_active transition (00000000->00400040)
[ 1.085574] ata1: exception Emask 0x2 SAct 0x0 SErr 0x1 action 0x6 frozen t4
[ 1.085651] ata1: SError: { RecovData }
[ 1.085744] ata1: hard resetting link
................ snip ...................
[ 2.411898] ata1: EH pending after 5 tries, giving up
[ 2.411972] ata1: EH complete
[ 1.085744] ata1: hard resetting link
................ snip ...................
Gave up waiting for root device.
[ ... ]
ALERT! /dev/disk/by-uuid/88c85a22-7536-4b90-9ddb-06c8d73f1f8f does not exist.
Dropping to a shell!
================================================
lshw output:
================================================
vimana
description: Notebook
product: HP Compaq 6715s (RU657EA#ACB)
vendor: Hewlett-Packard
version: F.07
serial: CNU73515HC
width: 64 bits
capabilities: smbios-2.4 dmi-2.4 vsyscall64 vsyscall32
configuration: boot=normal chassis=notebook
uuid=1585823D-E515-E011-2594-6D990E38B129
*-core
description: Motherboard
product: 30C2
vendor: Hewlett-Packard
physical id: 0
version: KBC Version 71.28
*-firmware
description: BIOS
vendor: Hewlett-Packard
physical id: 0
version: 68YTT Ver. F.07 (07/16/2007)
size: 128KiB
capacity: 960KiB
capabilities: pci pcmcia pnp upgrade shadowing cdboot bootselect edd
int13floppy720 int5printscreen int9keyboard int14
*-pci:0
description: Host bridge
product: RS690 Host Bridge
vendor: ATI Technologies Inc
physical id: 100
bus info: p...@0000:00:00.0
version: 00
width: 32 bits
clock: 66MHz
configuration: latency=64
*-pci:0
description: PCI bridge
product: RS690 PCI to PCI Bridge (Internal gfx)
vendor: ATI Technologies Inc
physical id: 1
bus info: p...@0000:00:01.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci ht bus_master cap_list
resources: ioport:4000(size=4096) memory:d0200000-d03fffff
ioport:c0000000(size=134217728)
*-pci:1
description: PCI bridge
product: ATI Technologies Inc
vendor: ATI Technologies Inc
physical id: 4
bus info: p...@0000:00:04.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:24 memory:d0000000-d00fffff
*-storage
description: SATA controller
product: SB600 Non-Raid-5 SATA
vendor: ATI Technologies Inc
physical id: 12
bus info: p...@0000:00:12.0
logical name: scsi0
version: 00
width: 32 bits
clock: 66MHz
capabilities: storage pm bus_master cap_list emulated
configuration: driver=ahci latency=64
resources: irq:16 ioport:9000(size=8) ioport:9008(size=4)
ioport:9010(size=8) ioport:5018(size=4) ioport:5020(size=16)
memory:d0409000-d04093ff
*-disk
description: ATA Disk
product: Hitachi HTS54161
vendor: Hitachi
physical id: 0.0.0
bus info: s...@0:0.0.0
logical name: /dev/sda
version: SBDO
serial: SB2E82H7J1Y5WH
size: 111GiB (120GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=000a7f38
================================================
lspci output:
================================================
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:04.0 PCI bridge: ATI Technologies Inc Device 7914
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d0000000-d00fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap:>MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0300c Data: 4151
Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30c2
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
0:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01)
Subsystem: ATI Technologies Inc SB600 Non-Raid-5 SATA
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 9008 [size=4]
Region 2: I/O ports at 9010 [size=8]
Region 3: I/O ports at 5018 [size=4]
Region 4: I/O ports at 5020 [size=16]
Region 5: Memory at d0409000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ahci
================================================
when running latest installer with 2.6.31 kernel and noacpi/noapic
options, it also can't find my disc drive.
older versions of kernel (up to 2.6.30-x) work just fine.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Summary changed:
- kernel 2.6.31-generic can't handle SATA drive
+ [karmic amd64] kernel 2.6.31-generic can't handle SATA drive
--
[karmic amd64] kernel 2.6.31-generic can't handle SATA drive
https://bugs.launchpad.net/bugs/407973
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
