After installing linux-backports-
modules-2.6.28-15-generic_2.6.28-15.18~lp415358oga1_i386.deb and
rebooting the nic is recognized
r...@eeepc-1005ha:~# dmesg | grep eth0
[ 21.844589] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full
Duplex>
[ 32.784056] eth0: no IPv6 routers present
and it's working properly
r...@eeepc-1005ha:~# scp anto...@culpa:/tmp/big_file .
big_file 4% 414MB 11.2MB/s 11:55 ETA
but only a note: I think this driver isn't capable to work in 1Gbps
mode,
r...@eeepc-1005ha:~# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: Not reported
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pg
Wake-on: d
Current message level: 0x0000003f (63)
Link detected: yes
Thank you so much.
--
Atheros AR8132 / L1c Gigabit Ethernet Adapter no detected in 9.04
https://bugs.launchpad.net/bugs/415358
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
