*** This bug is a duplicate of bug 78386 ***
Public bug reported:
Binary package hint: linux-restricted-modules-2.6.20-6-386
dmesg:
---------------------------------------------------------------------------------------
[ 0.000000] Linux version 2.6.20-6-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 20070106 (prerelease) (Ubuntu 4.1.1-21ubuntu7)) #2 SMP Wed Jan 31
20:53:39 UTC 2007 (Ubuntu 2.6.20-6.11-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800
end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800
end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000
end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001bda0000
end: 000000001bea0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001bea0000 size: 0000000000010000
end: 000000001beb0000 type: 3
[ 0.000000] copy_e820_map() start: 000000001beb0000 size: 0000000000050000
end: 000000001bf00000 type: 4
[ 0.000000] copy_e820_map() start: 000000001bf00000 size: 0000000000100000
end: 000000001c000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000
end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000
end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000
end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000
end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bea0000 (usable)
[ 0.000000] BIOS-e820: 000000001bea0000 - 000000001beb0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001beb0000 - 000000001bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 446MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7710
[ 0.000000] Entering add_active_range(0, 0, 114336) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114336
[ 0.000000] HighMem 114336 -> 114336
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114336
[ 0.000000] On node 0 totalpages: 114336
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 861 pages used for memmap
[ 0.000000] Normal zone: 109379 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 TOSINV ) @
0x000f76c0
[ 0.000000] ACPI: RSDT (v001 TOSINV RSDT 0x06040000 LTP 0x00000000) @
0x1beabfb4
[ 0.000000] ACPI: FADT (v001 TOSINV Goldfish 0x06040000 ATI 0x000f4240) @
0x1beafef6
[ 0.000000] ACPI: MADT (v001 TOSINV APIC 0x06040000 LTP 0x00000000) @
0x1beaff6a
[ 0.000000] ACPI: MCFG (v001 TOSINV MCFG 0x06040000 LTP 0x00000000) @
0x1beaffc4
[ 0.000000] ACPI: SSDT (v001 TOSINV Cpu0Cst 0x00003001 INTL 0x20030224) @
0x1beac1e7
[ 0.000000] ACPI: SSDT (v001 TOSINV CpuPm 0x00003000 INTL 0x20030224) @
0x1beabfec
[ 0.000000] ACPI: DSDT (v001 TOSINV SB450 0x06040000 MSFT 0x0100000e) @
0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
1c000000:c4000000)
[ 0.000000] Detected 1393.487 MHz processor.
[ 35.436879] Built 1 zonelists. Total pages: 113443
[ 35.436885] Kernel command line: BOOT_IMAGE=/casper/vmlinuz
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz
[ 35.437110] mapped APIC to ffffd000 (fee00000)
[ 35.437113] mapped IOAPIC to ffffc000 (fec00000)
[ 35.437118] Enabling fast FPU save and restore... done.
[ 35.437121] Enabling unmasked SIMD FPU exception support... done.
[ 35.437136] Initializing CPU#0
[ 35.437230] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 35.438376] Console: colour VGA+ 80x25
[ 35.441528] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 35.441937] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 35.459043] Memory: 442468k/457344k available (1975k kernel code, 14312k
reserved, 878k data, 324k init, 0k highmem)
[ 35.459113] virtual kernel memory layout:
[ 35.459114] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 35.459116] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 35.459118] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 35.459119] lowmem : 0xc0000000 - 0xdbea0000 ( 446 MB)
[ 35.459121] .init : 0xc03cf000 - 0xc0420000 ( 324 kB)
[ 35.459122] .data : 0xc02edd14 - 0xc03c96d4 ( 878 kB)
[ 35.459124] .text : 0xc0100000 - 0xc02edd14 (1975 kB)
[ 35.459511] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 35.537119] Calibrating delay using timer specific routine.. 2790.01
BogoMIPS (lpj=5580034)
[ 35.537263] Security Framework v1.0.0 initialized
[ 35.537320] SELinux: Disabled at boot.
[ 35.537386] Mount-cache hash table entries: 512
[ 35.537592] CPU: After generic identify, caps: afe9fbff 00100000 00000000
00000000 00000000 00000000 00000000
[ 35.537606] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 35.537698] CPU: L2 cache: 1024K
[ 35.537748] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040
00000000 00000000 00000000
[ 35.537770] Checking 'hlt' instruction... OK.
[ 35.553250] SMP alternatives: switching to UP code
[ 35.553506] Freeing SMP alternatives: 11k freed
[ 35.553645] ACPI: Core revision 20060707
[ 35.570730] CPU0: Intel(R) Celeron(R) M processor 1.40GHz stepping 08
[ 35.570887] Total of 1 processors activated (2790.01 BogoMIPS).
[ 35.571125] ENABLING IO-APIC IRQs
[ 35.571378] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 35.611115] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 35.611165] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 35.611256] ...trying to set up timer as Virtual Wire IRQ... works.
[ 35.756904] Brought up 1 CPUs
[ 35.757217] Booting paravirtualized kernel on bare hardware
[ 35.757332] NET: Registered protocol family 16
[ 35.757475] EISA bus registered
[ 35.757527] ACPI: bus type pci registered
[ 35.757586] PCI: Using MMCONFIG
[ 35.758610] Setting up standard PCI resources
[ 35.770030] ACPI: Interpreter enabled
[ 35.770083] ACPI: Using IOAPIC for interrupt routing
[ 35.770944] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 35.770998] PCI: Probing PCI hardware (bus 00)
[ 35.772533] Boot video device is 0000:01:05.0
[ 35.772990] PCI: Transparent bridge - 0000:00:14.4
[ 35.773145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 35.776447] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 35.777023] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 35.777563] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 35.778101] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 35.778642] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 35.779180] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 35.779721] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 35.780259] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 35.781296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 35.781852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 35.782149] ACPI: Power Resource [PFA1] (off)
[ 35.782290] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 35.782349] pnp: PnP ACPI init
[ 35.798772] pnp: PnP ACPI: found 10 devices
[ 35.798826] PnPBIOS: Disabled by ACPI PNP
[ 35.798923] PCI: Using ACPI for IRQ routing
[ 35.798973] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 35.799333] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 35.799389] pnp: 00:08: ioport range 0x220-0x22f has been reserved
[ 35.799441] pnp: 00:08: ioport range 0x400-0x401 has been reserved
[ 35.799492] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[ 35.799823] PCI: Bridge: 0000:00:01.0
[ 35.799873] IO window: 9000-9fff
[ 35.799924] MEM window: c0100000-c01fffff
[ 35.799974] PREFETCH window: d0000000-dfffffff
[ 35.800028] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 35.800078] IO window: 0000a400-0000a4ff
[ 35.800131] IO window: 0000a800-0000a8ff
[ 35.800185] PREFETCH window: 20000000-23ffffff
[ 35.800239] MEM window: 28000000-2bffffff
[ 35.800293] PCI: Bridge: 0000:00:14.4
[ 35.800343] IO window: a000-afff
[ 35.800397] MEM window: c0200000-c02fffff
[ 35.800451] PREFETCH window: 20000000-23ffffff
[ 35.800536] PCI: Enabling device 0000:02:06.0 (0004 -> 0007)
[ 35.800591] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 23 (level, low) ->
IRQ 16
[ 35.800715] NET: Registered protocol family 2
[ 35.832861] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 35.833004] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 35.833224] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 35.833336] TCP: Hash tables configured (established 16384 bind 8192)
[ 35.833389] TCP reno registered
[ 35.844906] checking if image is initramfs... it is
[ 36.623265] Freeing initrd memory: 6673k freed
[ 36.623936] audit: initializing netlink socket (disabled)
[ 36.624007] audit(1170541216.220:1): initialized
[ 36.624218] VFS: Disk quotas dquot_6.5.1
[ 36.624294] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 36.624404] io scheduler noop registered
[ 36.624493] io scheduler anticipatory registered
[ 36.624582] io scheduler deadline registered
[ 36.624681] io scheduler cfq registered (default)
[ 37.299329] isapnp: Scanning for PnP cards...
[ 37.653868] isapnp: No Plug & Play device found
[ 37.689898] Real Time Clock Driver v1.12ac
[ 37.690027] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 37.691156] mice: PS/2 mouse device common for all mice
[ 37.691825] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 37.692111] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 37.692166] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 37.692548] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64
irq 1,12
[ 37.695059] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 37.695115] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 37.695309] EISA: Probing bus 0 at eisa.0
[ 37.695367] Cannot allocate resource for EISA slot 1
[ 37.695446] Cannot allocate resource for EISA slot 8
[ 37.695496] EISA: Detected 0 cards.
[ 37.725633] TCP cubic registered
[ 37.725692] NET: Registered protocol family 1
[ 37.725745] NET: Registered protocol family 8
[ 37.725794] NET: Registered protocol family 20
[ 37.725886] Using IPI No-Shortcut mode
[ 37.726009] ACPI: (supports S0 S3 S4 S5)
[ 37.727270] Time: tsc clocksource has been installed.
[ 37.727658] Freeing unused kernel memory: 324k freed
[ 37.739955] input: AT Translated Set 2 keyboard as /class/input/input0
[ 37.903351] Capability LSM initialized
[ 37.936573] ACPI: Transitioning device [FAN1] to D3
[ 37.936630] ACPI: Transitioning device [FAN1] to D3
[ 37.937271] ACPI: Fan [FAN1] (off)
[ 37.942335] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 37.942551] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 37.942687] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor
Device is not present [20060707]
[ 1.768000] Time: acpi_pm clocksource has been installed.
[ 1.928000] ACPI: Thermal Zone [TZCR] (49 C)
[ 2.328000] SCSI subsystem initialized
[ 2.332000] libata version 2.00 loaded.
[ 2.336000] sata_sil 0000:00:12.0: version 2.0
[ 2.336000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) ->
IRQ 17
[ 2.336000] ata1: SATA max UDMA/100 cmd 0xDC854080 ctl 0xDC85408A bmdma
0xDC854000 irq 17
[ 2.336000] ata2: SATA max UDMA/100 cmd 0xDC8540C0 ctl 0xDC8540CA bmdma
0xDC854008 irq 17
[ 2.336000] scsi0 : sata_sil
[ 2.348000] usbcore: registered new interface driver usbfs
[ 2.348000] usbcore: registered new interface driver hub
[ 2.348000] usbcore: registered new device driver usb
[ 2.404000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver (PCI)
[ 2.592000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.612000] ieee1394: Initialized config rom entry `ip1394'
[ 2.804000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.812000] ata1.00: ATA-6, max UDMA/100, 156301488 sectors: LBA48 NCQ
(depth 0/32)
[ 2.812000] ata1.00: ata1: dev 0 multi count 16
[ 2.820000] ata1.00: configured for UDMA/100
[ 2.820000] scsi1 : sata_sil
[ 3.132000] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.132000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8032GS AS11
PQ: 0 ANSI: 5
[ 3.132000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) ->
IRQ 18
[ 3.132000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.132000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 1
[ 3.132000] ohci_hcd 0000:00:13.0: irq 18, io mem 0xc0005000
[ 3.140000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 3.140000] sda: Write Protect is off
[ 3.140000] sda: Mode Sense: 00 3a 00 00
[ 3.140000] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.140000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 3.140000] sda: Write Protect is off
[ 3.140000] sda: Mode Sense: 00 3a 00 00
[ 3.140000] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.140000] sda:<6>usb usb1: configuration #1 chosen from 1 choice
[ 3.188000] hub 1-0:1.0: USB hub found
[ 3.188000] hub 1-0:1.0: 4 ports detected
[ 3.292000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) ->
IRQ 18
[ 3.292000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.292000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 2
[ 3.292000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xc0006000
[ 3.352000] usb usb2: configuration #1 chosen from 1 choice
[ 3.352000] hub 2-0:1.0: USB hub found
[ 3.352000] hub 2-0:1.0: 4 ports detected
[ 3.456000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) ->
IRQ 18
[ 3.456000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.456000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 3
[ 3.456000] ehci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000
[ 3.456000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 3.456000] usb usb3: configuration #1 chosen from 1 choice
[ 3.456000] hub 3-0:1.0: USB hub found
[ 3.456000] hub 3-0:1.0: 8 ports detected
[ 3.488000] sda1 sda2 sda3 sda4
[ 3.488000] sd 0:0:0:0: Attached scsi disk sda
[ 3.492000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.560000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 3.560000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) ->
IRQ 19
[ 3.560000] ATIIXP: chipset revision 128
[ 3.560000] ATIIXP: not 100% native mode: will probe irqs later
[ 3.560000] ide0: BM-DMA at 0x8460-0x8467, BIOS settings: hda:pio,
hdb:pio
[ 3.560000] ide1: BM-DMA at 0x8468-0x846f, BIOS settings: hdc:DMA,
hdd:pio
[ 3.560000] Probing IDE interface ide0...
[ 3.596000] ACPI Error (evevent-0314): No installed handler for fixed event
[00000000] [20060707]
[ 4.104000] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 4.128000] Probing IDE interface ide1...
[ 4.332000] usb 2-1: configuration #1 chosen from 1 choice
[ 4.864000] hdc: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
[ 5.200000] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.200000] 8139cp 0000:02:07.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip
[ 5.200000] 8139cp 0000:02:07.0: Try the "8139too" driver instead.
[ 5.204000] 8139too Fast Ethernet driver 0.9.28
[ 5.204000] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 5.204000] eth0: RealTek RTL8139 at 0xdc860000, 00:a0:d1:34:39:23, IRQ 20
[ 5.204000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 5.204000] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) ->
IRQ 17
[ 5.256000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
MMIO=[c0215800-c0215fff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.268000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache,
UDMA(33)
[ 5.268000] Uniform CD-ROM driver Revision: 3.20
[ 6.288000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 6.324000] ISO 9660 Extensions: RRIP_1991A
[ 6.360000] Registering unionfs 20060916-2203
[ 6.360000] unionfs: debugging is not enabled
[ 6.372000] loop: loaded (max 8 devices)
[ 6.432000] squashfs: version 3.1 (2006/08/19) Phillip Lougher
[ 6.528000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d1343923]
[ 63.140000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 63.624000] ACPI Error (evxfevnt-0386): Could not disable RealTimeClock
events [20060707]
[ 63.712000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 64.120000] input: PC Speaker as /class/input/input1
[ 64.160000] ath_hal: module license 'Proprietary' taints kernel.
[ 64.164000] ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413, RF5413)
[ 64.268000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 64.592000] wlan: 0.8.4.2 (0.9.2.1)
[ 64.620000] ath_rate_sample: 1.2 (0.9.2.1)
[ 64.696000] ath_pci: 0.9.4.5 (0.9.2.1)
[ 64.696000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 64.696000] BUG: unable to handle kernel NULL pointer dereference at virtual
address 00000000
[ 64.696000] printing eip:
[ 64.696000] dca7e018
[ 64.696000] *pde = 00000000
[ 64.696000] Oops: 0002 [#1]
[ 64.696000] SMP
[ 64.696000] Modules linked in: ath_pci ath_rate_sample wlan i2c_piix4
ath_hal(P) pcspkr i2c_core soundcore snd_page_alloc pci_hotplug evdev squashfs
loop unionfs nls_cp437 isofs ide_cd cdrom 8139too sg sd_mod ohci1394 ieee1394
8139cp mii atiixp ehci_hcd ohci_hcd usbcore sata_sil ata_generic libata
scsi_mod generic thermal processor fan fbcon tileblit font bitblit softcursor
vesafb capability commoncap
[ 64.696000] CPU: 0
[ 64.696000] EIP: 0060:[<dca7e018>] Tainted: P VLI
[ 64.696000] EFLAGS: 00010286 (2.6.20-6-generic #2)
[ 64.696000] EIP is at ath_attach+0x148/0x1530 [ath_pci]
[ 64.696000] eax: 00000000 ebx: 0000001a ecx: 00000000 edx: d2efbdd3
[ 64.696000] esi: db741c00 edi: d2930400 ebp: d2930400 esp: d2efbd44
[ 64.696000] ds: 007b es: 007b ss: 0068
[ 64.696000] Process modprobe (pid: 4891, ti=d2efa000 task=d2edc560
task.ti=d2efa000)
[ 64.696000] Stack: dcae0000 d2efbdcc 00000000 00000000 00000000 00000000
00000000 00000000
[ 64.696000] d2930000 001a0000 d2931a38 00000000 00000000 00000000
00000000 00000000
[ 64.696000] 00000000 00000000 00000000 00000000 00000014 d21c5740
00000080 c03c1000
[ 64.696000] Call Trace:
[ 64.696000] [<c01537f1>] setup_irq+0xf1/0x1e0
[ 64.696000] [<dca830f0>] ath_pci_probe+0x0/0x370 [ath_pci]
[ 64.696000] [<dca809b0>] ath_intr+0x0/0xb50 [ath_pci]
[ 64.696000] [<dca832c3>] ath_pci_probe+0x1d3/0x370 [ath_pci]
[ 64.696000] [<c01b7f4e>] sysfs_create_link+0x6e/0x160
[ 64.696000] [<c0200000>] pci_save_msi_state+0x130/0x170
[ 64.696000] [<dca830f0>] ath_pci_probe+0x0/0x370 [ath_pci]
[ 64.696000] [<c01f9cd6>] pci_device_probe+0x56/0x80
[ 64.696000] [<c02556a4>] really_probe+0x54/0x140
[ 64.696000] [<c02557d9>] driver_probe_device+0x49/0xc0
[ 64.696000] [<c025598e>] __driver_attach+0x9e/0xa0
[ 64.696000] [<c0254bab>] bus_for_each_dev+0x3b/0x60
[ 64.696000] [<c0255556>] driver_attach+0x16/0x20
[ 64.696000] [<c02558f0>] __driver_attach+0x0/0xa0
[ 64.696000] [<c0254f3b>] bus_add_driver+0x7b/0x1a0
[ 64.696000] [<c01f9ea4>] __pci_register_driver+0x74/0xc0
[ 64.696000] [<dca1f030>] init_ath_pci+0x30/0x54 [ath_pci]
[ 64.696000] [<c0143bcd>] sys_init_module+0x15d/0x1ba0
[ 64.696000] [<c0107a3d>] sys_mmap2+0xcd/0xd0
[ 64.696000] [<c0103260>] syscall_call+0x7/0xb
[ 64.696000] [<c02e0033>] unix_gc+0xa3/0x3c0
[ 64.696000] =======================
[ 64.696000] Code: 89 40 04 c7 85 a4 17 00 00 e0 26 a8 dc 8b 54 24 20 8d 84
24 88 00 00 00 89 44 24 04 8b 42 1c 89 ea 89 04 24 89 d8 e8 58 a2 01 00 <01> 00
00 00 24 2c 0f 84 98 05 00 00 8b 5c 24 2c 8b 43 04 3d 00
[ 64.696000] EIP: [<dca7e018>] ath_attach+0x148/0x1530 [ath_pci] SS:ESP
0068:d2efbd44
[ 64.696000] <6>Linux agpgart interface v0.101 (c) Dave Jones
[ 66.192000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps:
0xa04713/0x0
[ 66.192000] synaptics: Toshiba Satellite A100 detected, limiting rate to
40pps.
[ 66.232000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 66.872000] drivers/usb/class/usblp.c: Disabling reads from problem
bidirectional printer on usblp0
[ 66.888000] drivers/usb/class/usblp.c: usblp0: USB Unidirectional printer
dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
[ 66.888000] usbcore: registered new interface driver usblp
[ 66.888000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 67.540000] NET: Registered protocol family 17
[ 68.524000] NET: Registered protocol family 10
[ 68.524000] lo: Disabled Privacy Extensions
[ 79.080000] eth0: no IPv6 routers present
[ 136.420000] ACPI: AC Adapter [ADP0] (on-line)
[ 136.956000] ACPI: Battery Slot [BAT0] (battery present)
[ 136.976000] input: Power Button (FF) as /class/input/input3
[ 136.976000] ACPI: Power Button (FF) [PWRF]
[ 136.976000] input: Power Button (CM) as /class/input/input4
[ 136.976000] ACPI: Power Button (CM) [PWRB]
[ 136.976000] input: Lid Switch as /class/input/input5
[ 136.976000] ACPI: Lid Switch [LID]
[ 137.348000] No dock devices found.
[ 137.380000] Using specific hotkey driver
[ 137.440000] ibm_acpi: ec object not found
[ 137.504000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
-------------------------------------------------------------------------------------------
Crash seems to happen while loading ath_pci
lspci -vv:
---------------------------------------------
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
Latency: 64
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (rev
80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort+
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 8440 [size=8]
Region 1: I/O ports at 8430 [size=4]
Region 2: I/O ports at 8420 [size=8]
Region 3: I/O ports at 8410 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 24000000 [disabled] [size=512K]
Capabilities: <access denied>
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev
80) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev
80) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
(rev 80) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81)
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 8450 [size=16]
Region 1: Memory at c0004400 (32-bit, non-prefetchable) [size=1K]
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE
Controller ATI (rev 80) (prog-if 8a [Master SecP PriP])
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8460 [size=16]
Capabilities: <access denied>
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
(prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=04, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c0200000-c02fffff
Prefetchable memory behind bridge: 20000000-23ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress
200M] (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
02:04.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC
(rev 01)
Subsystem: Askey Computer Corp. Unknown device 7094
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:06.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
16-bit legacy interface ports at 0001
02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at c0215000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
02:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c0215800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at c0210000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
-------------------------------------------------------------------
Dunno if that's related, but i get a "Internal Error - Failed to
initialize HAL!" message at the start of gnome, too. Plus my soundcard
isn't working. Another thing: my synaptics touchpad is properly detected
by the kernel, but not properly configured for X. No multitapping or
scrolling, though one-finger tapping works. But maybe I should file
another bugreports for these.
HTH, tenco
** Affects: linux-restricted-modules-2.6.20 (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
[Herd3] Kernel oops while booting Live CD
https://launchpad.net/bugs/83114
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
