There has never been an error that I can remember and looking at: "sudo
less /var/log/cups/error_log", shows nothing in the file. THe printer
is a HP Officejet 3550. THe jobs are completed and I'm sure Open Office
thinks everything is just fine. As I said, it does feed in the envelope
and you can see it feeds in way too far, then you can hear it print. Of
course it prints on nothing as the envelope already took its trip too
far through the printer. If I put a stadard sheet of paper in place of
the same job, it prints 9 inches down the page, thus confirming why it's
not on the envelope.
With the 9 1/2 inch envelopes(Now on the 9 or 10 inch evvelope print
setting) it feeds in and prints just fine. Except it cuts off the first
two characters(with the default .039" edge spacing) on all the left side
senders address lines. Testing with the same envelope settings but
substituting a standard peice of paper, it still cuts off the first two
characters on every line of the left margin. So it's not the
instability of the printer handling the envelope through its feed.
Thanks for your help and the hard work you do making open source as
professional as it is -and a great choice to Microsofts monopoly. Best
Regards, Mark Buric
--- On Sun, 9/13/09, Till Kamppeter <[email protected]> wrote:
> From: Till Kamppeter <[email protected]>
> Subject: [Bug 412432] Re: Printing 6 1/2x3 5/8 envelopes
> To: [email protected]
> Date: Sunday, September 13, 2009, 5:37 PM
> Can you tell us which printer you are
> using? Can you also provide us an
> error_log as described in the section "CUPS error_log" on
> https://wiki.ubuntu.com/DebuggingPrintingProblems.
>
> --
> Printing 6 1/2x3 5/8 envelopes
> https://bugs.launchpad.net/bugs/412432
> You received this bug notification because you are a direct
> subscriber
> of the bug.
>
> Status in “openoffice.org” package in Ubuntu:
> Incomplete
>
> Bug description:
> Binary package hint: openoffice.org
>
> If I use a long envelope, say a 9 or 10 inch long envelope
> it will start to feed then print ok. But the 6 1/2
> envelopes(vertical) feed in past the length of the envelope
> during the print operation, thus not printing on it.
> This is despite the correct envelope being selected on the
> printer configurations. If I situate the envelope
> horizontally I am able to get a successful print BUT it's
> not really practical to be sticking a 3 5/8 envelope so far
> into the printer feed you can't even see it. Plus any
> thick fingered people probably would barely be able to clear
> their fingers sticking in the narrow slot 3 inches INTO the
> printer itself.
>
> ProblemType: Bug
> Architecture: amd64
> DistroRelease: Ubuntu 9.04
> NonfreeKernelModules: fglrx
> Package: openoffice.org-core 1:3.1.0-5ubuntu1~jaunty1
> ProcEnviron:
> PATH=(custom, no user)
> LANG=en_US.UTF-8
> SHELL=/bin/bash
> SourcePackage: openoffice.org
> Uname: Linux 2.6.28-15-generic x86_64
> UnreportableReason: This is not a genuine Ubuntu package
>
--
Printing 6 1/2x3 5/8 envelopes
https://bugs.launchpad.net/bugs/412432
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
