This bug was fixed in the package linux-fsl-imx51 - 2.6.31-101.8
---------------
linux-fsl-imx51 (2.6.31-101.8) karmic; urgency=low
[ Alan Tull ]
* ARM: IMX51: ENGR00114681 pcm: set minimum period to 2k
* ARM: IMX51: ENGR00114820-1 Revert SGTL5000: Enable amixer controls
Jack/Speaker Function
* ARM: IMX51: ENGR00114820-2 sgtl5000: pop fixes
* ARM: IMX51: ENGR00114867 MX51: tristate i2c levelshifter
* ARM: IMX51: ENGR00115688 dvi: disable edid read
* ARM: IMX51: ENGR00115618-1 sgtl5000: power reduction pop fix
* ARM: IMX51: ENGR00115618-2 sgtl5000: power savings
* ARM: IMX51: ENGR00115754 sgtl5000: power mic bias earlier
[ Amit Kucheria ]
* [Config] Run updateconfigs after rebasing to 2.6.31-rc8
* ARM: IMX51: Make sgt5000 driver compile
* [Upstream] Remove X86 dependency for the rt3070 driver
- LP: #423767
* [Config] Enable rt3070 from staging for imx51
- LP: #423767
* [Config] Set CONFIG_LSM_MMAP_MIN_ADDR to 0
* [Config] imx51: Enable APM_EMULATION as per imx51_defconfig
* ARM: IMX51: Fix compile of mxc_dataflash.c by replacing bus_id
* ARM: IMX51: Don't let the dataflash driver hitch a ride on CONFIG_MTD
* [Config] imx51: disable MTD_MXC_DATAFLASH
* [Config] Run updateconfigs after rebasing to 2.6.31 final
* [Config] imx51: updateconfigs after applying sdk-1.6 patches
* ARM: IMX51: Remove cpu_is_mx2/cpu_is_mx3 definition from hardware.h
* ARM: IMX51: Paramters to module_param_call should be NULL
[ Ann Thornton ]
* ARM: IMX51: ENGR00113055-1 Add ability to read and user EDID info
* ARM: IMX51: ENGR00113055-2 Added ability to read EDID data and use it
to set monitor.
* ARM: IMX51: ENGR00114026 MX51 Prevent 2nd initialization of
framebuffer.
* ARM: IMX51: ENGR00114023-1 Support for dual monitors.
* ARM: IMX51: ENGR00114023-2 MX51: Add support for dual monitors.
* ARM: IMX51: ENGR00114024 Enable 720p via HDMI
[ Arik Gubeskys ]
* ARM: IMX51: ENGR00114210 IPU IC bypass mode: move display configuration
to the FB driver
[ b00984 ]
* ARM: IMX51: ENGR00113773 Add apm support for mc13892 battery
* ARM: IMX51: ENGR00114655 mitsubishi lvds xga lcd support for babbage
2.5
[ Dinh Nguyen ]
* ARM: IMX51: ENGR00114282 MX51: Disable L2 SRPG
* ARM: IMX51: ENGR00114453 MX51: Add support for keypad on Babbage 2.5
board
[ Guoqing Jiang ]
* ARM: IMX51: ENGR00113618 Audio: Workaround for sgtl5000 codec suspend
failure issue on MX25
[ Jason ]
* ARM: IMX51: ENGR00114157-1 Add SPI data flash driver support
* ARM: IMX51: ENGR00114157-2 Add SPI data flash support for MX51
babbage2.5
* ARM: IMX51: ENGR00114189 Enlarge the rootfs partition to accommodate
Gnome-mobile
* ARM: IMX51: ENGR00113990 Fix for mtd_oobtest test failure
* ARM: IMX51: ENGR00114882 Reset NFC delay line register
* ARM: IMX51: ENGR00114880 Data abort on NFC memory byte access
* ARM: IMX51: ENGR00115329 Enable NFC symmetric mode on MX51
* ARM: IMX51: ENGR00115330 Fix ECC mode setting for MX51TO3
* ARM: IMX51: ENGR00115336 Fix setting NFC FW for 16bit nand flash
support on MX51
[ JasonHua ]
* ARM: IMX51: ENGR00113106 MX25 Camera: Some kernel message dumped when
remove ov2640_camera
[ Katherine Lu ]
* ARM: IMX51: ENGR00114097 MX51 Babbage: Register backlight device only
display card attached
* ARM: IMX51: ENGR00113546 MX51: set PLL2 as UART parent clk
* ARM: IMX51: ENGR00114139 MX51 Babbage: remove MC13892 backlight device
* ARM: IMX51: ENGR00114166 MX51 Babbage: can not reboot from SPI NOR
* ARM: IMX51: ENGR00114037 MX31: LCD can not resume after entering
standby
* ARM: IMX51: ENGR00114881 MX51: Disable SAHARA by default
* ARM: IMX51: ENGR00114803 eCSPI Hang when acessing from multi modules
[ Lily Zhang ]
* ARM: IMX51: ENGR00113197-1 Fix Write pending issue with hwclock
function
* ARM: IMX51: ENGR00113197-2 disable RTC clock when it's not active
* ARM: IMX51: ENGR00110228 Fix GPT timer stop issue
* ARM: IMX51: ENGR00113662 enable coin cell charger
* ARM: IMX51: ENGR00114328-1 SRTC: Change wait time for write operations
* ARM: IMX51: ENGR00114328-2 BBG: Keep VRTC and CKIL active for SRTC
* ARM: IMX51: ENGR00114345 Set MC13892 irq as wakeup resource
* ARM: IMX51: ENGR00114738 MX51 BBG: Add OneWire support
[ Lionel.Xu ]
* ARM: IMX51: ENGR00107200 MX25: The SW workaround for left/right channel
random swap issue
* ARM: IMX51: ENGR00113470 MX37 ALSA ADC: Resolve the issue that arecord
can't work
* ARM: IMX51: ENGR00115113 SGTL5000: Jack Function/Speaker Function
[ Liu Ying ]
* ARM: IMX51: ENGR00113541 IPUv3:Support IC combing with local alpha
contained in pixel
* ARM: IMX51: ENGR00113673 IPUv3:Fix RGB to RGB pixel format changing
with IC PRP_VF
* ARM: IMX51: ENGR00114324-1 Enhance mmap implement of IIM driver
* ARM: IMX51: ENGR00114611 Support RGB565 pixel format for WVGA panel on
BBG2.5
* ARM: IMX51: ENGR00114617 Support OV3640 camera on BBG2.5 accessory
board
* ARM: IMX51: ENGR00114663-1 Add function comments for mmap function of
IIM driver
[ Nancy Chen ]
* ARM: IMX51: ENGR00114374 USB: Failed to unload USB host module
* ARM: IMX51: ENGR00114685 MX51: Change the GP voltages for 167MHz and
800MHz
* ARM: IMX51: ENGR00114689 CPUFREQ: Add conservative governor support
* ARM: IMX51: ENGR00114686 DVFS-CORE: Use GPC STRT bit to control DVFS
* ARM: IMX51: ENGR00114686-1 MX51: Enable other CPUFREQ governors
* ARM: IMX51: ENGR00114736 Fix build break by adding mxc_dvfs.h
* ARM: IMX51: ENGR00114871 MX51: Add command line to enable peripheral SW
Freq scaling
* ARM: IMX51: ENGR00114963 MX51: CPUFREQ is not trigged if DVFS CORE is
enabled
* ARM: IMX51: ENGR00115013 MX51: System doesn't enter APM mode if DVFS
CORE enabled
[ Patrick Turley ]
* ARM: IMX51: ENGR00107929 /proc/cpu/clocks Corrupts memory
* ARM: IMX51: ENGR00103310 Initial imx_nfc NAND Flash MTD driver
* ARM: IMX51: ENGR00115700: mxc_nd2 driver panics the kernel when booting
on i.MX25
[ Raj Rajasekaran ]
* ARM: IMX51: ENGR00107366 DryIce: DryIce unit test failed with RTC
enabled.
[ Ranjani Vaidyanathan-RA5478 ]
* ARM: IMX51: ENGR00114937: MX51: Move USBOH3 and USB-PHY to source from
PLL2 and 24MHz.
* ARM: IMX51: ENGR00115321: MX51: Change STOP mode voltage based on DS0.3
datasheet.
* ARM: IMX51: ENGR00115334: MX51: Donot scale arm_axi_clk in peripheral
bus scaling.
[ Richard Zhu ]
* ARM: IMX51: ENGR00113376 [MX37] SD can't detected after fast
removal/insertion
* ARM: IMX51: ENGR00113607 Refine and unify the definitions of the two
mmc host
* ARM: IMX51: ENGR00114325-1: SIM: Add MX25 support
[ Rob Herring ]
* ARM: IMX51: ENGR00114598 mx51: add missing fb memory resource setup
* ARM: IMX51: ENGR00114599 mx51: Add gpu2d uio driver
* ARM: IMX51: ENGR00115613 ipuv3: enable DMFC watermark for sync channels
[ Robby Cai ]
* ARM: IMX51: ENGR00114911 make video buffer cacheable to improve video
performance
[ Tim Gardner ]
* [Config] Don't include ABI or version in vmlinuz name in kernel-image
- LP: #359049
[ Wallace Wang ]
* ARM: IMX51: ENGR00114140 SSI: TX fail if RX is enabled before TX
* ARM: IMX51: ENGR00114625 BABBAGE: Add spdif support
* ARM: IMX51: ENGR00114851 MX51: Fix SSI1 SDMA data transfer failure
[ William Lai ]
* ARM: IMX51: ENGR00114609 MX35 ASRC: Support SPDIF in/out
* ARM: IMX51: ENGR00114644-1 MX51 PWM: Add pwm and backlight devices
* ARM: IMX51: ENGR00114644-2 MX51 PWM: Correction for the PWM
[ Wu Guoxing ]
* ARM: IMX51: ENGR00114622 GPU: add platform device
* ARM: IMX51: ENGR00114692 GPU: use axi_a_clk for both 2d and 3d
* ARM: IMX51: ENGR00114962 : change gpu UIO driver to module
[ Xinyu Chen ]
* ARM: IMX51: ENGR00114989 MX35 SPDIF driver failed to play 48KHz
audio
[ Zhou Jingyu ]
* ARM: IMX51: ENGR00114145 disable pmic charger on Babbage
* ARM: IMX51: ENGR00113543 fix bug in mc13892 ADC suspend
[ Ubuntu: 2.6.31-10.34 ]
* [Upstream] ext3: Don't update superblock write time when filesystem is
read-only
- LP: #427622
[ Ubuntu: 2.6.31-10.33 ]
* [Upstream] dvb-usb: fix tuning with Cinergy T2
- LP: #421258
* [Config] Unconditionally copy files from sub-flavours lists.
(really, really fix it this time)
- LP: #423426
* [Config] Set CONFIG_CACHEFILES=m for all flavours
* ext4: Don't update superblock write time when filesystem is read-only
- LP: #427822
[ Ubuntu: 2.6.31-10.32 ]
* [Config] enable module support for memory stick
- LP: #159951
* [Config] Unconditionally copy files from sub-flavours lists.
- LP: #423426
[ Ubuntu: 2.6.31-10.31 ]
* rebase to v2.6.31 final
* [Config] Recommend grub-pc in linux-image
- LP: #385741
* [Upstream] Pull latest update of lenovo-sl-laptop
* [Upstream] (drop after 2.6.31) acerhdf: fix fan control for AOA150
model
- LP: #426691
* [Config] De-macro some package names.
* rebase to 2.6.31 final.
[ Ubuntu: 2.6.31-10.30 ]
* [Config] Enable CONFIG_USB_DEVICEFS
- LP: #417748
* [Config] Populate the config-update template a bit more
* rebase to v2.6.31-rc9
* [Config] update configs following rebase to v2.6.31-rc9
* [Config] update ports configs following rebase to v2.6.31-rc9
* SAUCE: wireless: hostap, fix oops due to early probing interrupt
- LP: #254837
* [Upstream] ACPI: Add Thinkpad T400 & Thinkpad T500 to OSI(Linux)
white-list
- LP: #281732
* [Upstream] ACPI: Add Thinkpad X200, X200s, X200t to OSI(Linux)
white-list
- LP: #281732
* [Upstream] ACPI: Add Thinkpad X300 & Thinkpad X301 to OSI(Linux)
white-list
- LP: #281732
* [Upstream] ACPI: Add Thinkpad R400 & Thinkpad R500 to OSI(Linux)
white-list
- LP: #281732
* [Upstream] ACPI: Add Thinkpad W500, W700, & W700ds to OSI(Linux)
white-list
- LP: #281732
* SAUCE: AppArmor: Fix profile attachment for regexp based profile names
- LP: #419308
* SAUCE: AppArmor: Return the correct error codes on profile
addition/removal
- LP: #408473
* SAUCE: AppArmor: Fix OOPS in profile listing, and display full list
- LP: #408454
* SAUCE: AppArmor: Fix mapping of pux to new internal permission format
- LP: #419222
* SAUCE: AppArmor: Fix change_profile failure
- LP: #401931
* SAUCE: AppArmor: Tell git to ignore generated include files
- LP: #419505
* [Upstream] acpi: video: Loosen strictness of video bus detection code
- LP: #333386
* SAUCE: Remove ov511 driver from ubuntu subdirectory
* [Config] Exclude char-modules from non-x86 udeb creation
* SAUCE: Notify the ACPI call chain of AC events
* [Config] CONFIG_SATA_VIA=m
- LP: #403385
* [Config] Build in all phylib support modules.
* [Config] Don't fail when sub-flavour files are missing
- LP: #423426
* [Config] Set CONFIG_LSM_MMAP_MIN_ADDR=0
- LP: #423513
* Rebased against v2.6.31-rc9
[ Ubuntu: 2.6.31-9.29 ]
* [Upstream] agp/intel: support for new chip variant of IGDNG mobile
- LP: #419993
* [Config] d-i/modules: Add new char-modules file, initialize with
intel-agp
- LP: #420605
* Rebased against 2.6.31-rc8 plus some inotify regression patches:
up through
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
adda766193ea1cf3137484a9521972d080d0b7af.
[ Ubuntu: 2.6.31-8.28 ]
* [Config] Let nic-shared-modules depends on crypto-modules
- LP: #360966
* [Upstream] (drop after 2.6.31) drm/i915: increase default latency
constant
- LP: #412492
* [Upstream]: (drop after 2.6.31) dell-laptop: don't change softblock
status if HW switch is disabled
- LP: #418721
* [Upstream]: (drop after 2.6.31) compal-laptop: Add support for known
Compal made Dell laptops
* [Upstream]: (drop after 2.6.31) compal-laptop: Replace sysfs support
with rfkill support
* [Config] Add acpiphp to virtual sub-flavour
- LP: #364916
* Drop KSM patch set for now because of instabilities with encrypted swap.
- LP: #418781
[ Ubuntu: 2.6.31-7.27 ]
* [Config] updateconfigs updateportsconfigs after 2.6.31-rc7 rebase
* SAUCE: (drop after 2.6.31) Added KSM from mmotm-2009-08-20-19-18
Replaces previous ksm patches from 2.6.31-6.25
* [Config] KSM=y
[ Ubuntu: 2.6.31-6.26 ]
* [Config] enable CONFIG_AUFS_BR_RAMFS
- LP: #414738
* split out debian directory ready for abstraction
* add printdebian target to find branch target
* abstracted debian -- debian/files is not abstracted
* abstracted debian -- packages must be built in debian/<pkg>
* abstracted debian -- kernel-wedge needs to work in debian/
* abstracted debian -- ensure we install the copyright file
* abstracted-debian -- drop the debian directories from headers
* abstracted-debian -- drop the debian directories from headers part 2
* SAUCE: ubuntu-insert-changes -- follow abstracted debian
* [Upstream] aoe: ensure we initialise the request_queue correctly V2
- LP: #410198
* [Config] Ports: Disable CONFIG_CPU_FREQ_DEBUG on powerpc-smp
* [Config] Ports: Re-enable windfarm modules on powerpc64-smp
- LP: #413150
* [Config] Ports: Build all cpu frequency scaling governors into ports
kernels
* [Config] Ports: Build ext2 and ext3 modules into ports kernels
* [Config] Ports: CONFIG_PACKET=y for all ports kernels
* [Config] Ports: Enable PS3 network driver
* abstracted debian -- call $(DEBIAN)/rules using make
* [Config] Abstract the debian directory
* SAUCE: Improve error reporting in postinst
- LP: #358564
-- Andy Whitcroft <[email protected]> Fri, 18 Sep 2009 13:10:41 +0100
** Changed in: linux-fsl-imx51 (Ubuntu Karmic)
Status: Fix Committed => Fix Released
--
imx51 udeb hardcodes linux version in vmlinuz binary name
https://bugs.launchpad.net/bugs/359049
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
