Public bug reported:
APIC is misbehaving, Ubuntu normal bootup hung at around 40% of Progress
bar
My H/W Toshiba Satellite Pro A120 Laptop
My S/W Ubuntu Feisty Fawn flight 3
dmesg shows the following error:-
APIC error on CPU0: 40(40)
Please help me diagnose this problem further
I have attached the entire dmesg output(used recovery mode to boot-up)
How to reproduce the problem:-
Boot using the Generic kernel without the Recovery one
dmesg shows the following error
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirmed
** Description changed:
APIC is misbehaving, Ubuntu normal bootup hung at around 40% of Progress
bar
My H/W Toshiba Satellite Pro A120 Laptop
My S/W Ubuntu Feisty Fawn flight 3
+ dmesg shows the following error:-
+ APIC error on CPU0: 40(40)
+
Please help me diagnose this problem further
- Here is the entire dmesg output(used recovery mode to boot-up)
+ I have attached the entire dmesg output(used recovery mode to boot-up)
- [ 0.000000] Linux version 2.6.20-6-generic ([EMAIL PROTECTED]) (gcc
version 4.1.2 20070106 (prerelease) (Ubuntu 4.1.1-21ubuntu7)) #2 SMP Wed Jan 31
20:53:39 UTC 2007 (Ubuntu 2.6.20-6.11-generic)
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] sanitize start
- [ 0.000000] sanitize end
- [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00
end: 000000000009fc00 type: 1
- [ 0.000000] copy_e820_map() type is E820_RAM
- [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400
end: 00000000000a0000 type: 2
- [ 0.000000] copy_e820_map() start: 00000000000e0000 size: 000000000000ee00
end: 00000000000eee00 type: 2
- [ 0.000000] copy_e820_map() start: 00000000000eee00 size: 0000000000000200
end: 00000000000ef000 type: 4
- [ 0.000000] copy_e820_map() start: 00000000000ef000 size: 0000000000011000
end: 0000000000100000 type: 2
- [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f6a0000
end: 000000001f7a0000 type: 1
- [ 0.000000] copy_e820_map() type is E820_RAM
- [ 0.000000] copy_e820_map() start: 000000001f7a0000 size: 0000000000010000
end: 000000001f7b0000 type: 3
- [ 0.000000] copy_e820_map() start: 000000001f7b0000 size: 0000000000850000
end: 0000000020000000 type: 2
- [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000018000
end: 00000000fec18000 type: 2
- [ 0.000000] copy_e820_map() start: 00000000fec20000 size: 0000000000008000
end: 00000000fec28000 type: 2
- [ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400
end: 00000000fed00400 type: 2
- [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000
end: 00000000fed1a000 type: 2
- [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000
end: 00000000fed90000 type: 2
- [ 0.000000] copy_e820_map() start: 00000000feda0000 size: 0000000000020000
end: 00000000fedc0000 type: 2
- [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000
end: 00000000fee01000 type: 2
- [ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000100000
end: 00000000ffc00000 type: 2
- [ 0.000000] copy_e820_map() start: 00000000ffe00000 size: 0000000000200000
end: 0000000100000000 type: 2
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
- [ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7a0000 (usable)
- [ 0.000000] BIOS-e820: 000000001f7a0000 - 000000001f7b0000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000001f7b0000 - 0000000020000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec18000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec20000 - 00000000fec28000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
- [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
- [ 0.000000] 0MB HIGHMEM available.
- [ 0.000000] 503MB LOWMEM available.
- [ 0.000000] Entering add_active_range(0, 0, 128928) 0 entries of 256 used
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0 -> 4096
- [ 0.000000] Normal 4096 -> 128928
- [ 0.000000] HighMem 128928 -> 128928
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0 -> 128928
- [ 0.000000] On node 0 totalpages: 128928
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
- [ 0.000000] Normal zone: 975 pages used for memmap
- [ 0.000000] Normal zone: 123857 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 0 pages used for memmap
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] ACPI: RSDP (v000 TOSHIB ) @
0x000f0210
- [ 0.000000] ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @
0x1f7a0000
- [ 0.000000] ACPI: FADT (v002 TOSHIB 750 0x20030101 TASM 0x04010000) @
0x1f7a0070
- [ 0.000000] ACPI: SSDT (v001 TOSHIB A0046 0x20060208 MSFT 0x0100000e) @
0x1f7a5488
- [ 0.000000] ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @
0x1f7a0048
- [ 0.000000] ACPI: MADT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @
0x1f7a5d3a
- [ 0.000000] ACPI: MCFG (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @
0x1f7a5da2
- [ 0.000000] ACPI: HPET (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @
0x1f7a5e12
- [ 0.000000] ACPI: SSDT (v001 TOSHIB A0046 0x20051021 MSFT 0x0100000e) @
0x1f7a5e4a
- [ 0.000000] ACPI: SSDT (v001 TOSHIB A0046 0x20060310 MSFT 0x0100000e) @
0x1f7a5ec0
- [ 0.000000] ACPI: DSDT (v001 TOSHIB A0046 0x20060405 MSFT 0x0100000e) @
0x00000000
- [ 0.000000] ACPI: PM-Timer IO Port: 0xd808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] Processor #0 6:14 APIC version 20
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dec00000)
- [ 0.000000] Detected 1862.132 MHz processor.
- [ 7.773436] Built 1 zonelists. Total pages: 127921
- [ 7.773440] Kernel command line:
root=UUID=39d65bf4-776f-4220-a557-7065373285ed ro quiet splash
- [ 7.773756] mapped APIC to ffffd000 (fee00000)
- [ 7.773775] mapped IOAPIC to ffffc000 (fec00000)
- [ 7.773778] Enabling fast FPU save and restore... done.
- [ 7.773782] Enabling unmasked SIMD FPU exception support... done.
- [ 7.773806] Initializing CPU#0
- [ 7.773936] PID hash table entries: 2048 (order: 11, 8192 bytes)
- [ 7.777364] Console: colour VGA+ 80x25
- [ 7.777745] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 7.778135] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 7.799373] Memory: 500708k/515712k available (1975k kernel code, 14524k
reserved, 878k data, 324k init, 0k highmem)
- [ 7.799382] virtual kernel memory layout:
- [ 7.799383] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
- [ 7.799384] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 7.799402] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
- [ 7.799403] lowmem : 0xc0000000 - 0xdf7a0000 ( 503 MB)
- [ 7.799405] .init : 0xc03cf000 - 0xc0420000 ( 324 kB)
- [ 7.799406] .data : 0xc02edd14 - 0xc03c96d4 ( 878 kB)
- [ 7.799407] .text : 0xc0100000 - 0xc02edd14 (1975 kB)
- [ 7.799410] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
- [ 7.799700] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 7.799721] hpet0: 3 64-bit timers, 14318180 Hz
- [ 7.800737] Using HPET for base-timer
- [ 7.879577] Calibrating delay using timer specific routine.. 3729.35
BogoMIPS (lpj=7458704)
- [ 7.879667] Security Framework v1.0.0 initialized
- [ 7.879674] SELinux: Disabled at boot.
- [ 7.879708] Mount-cache hash table entries: 512
- [ 7.879960] CPU: After generic identify, caps: afe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000
- [ 7.879985] monitor/mwait feature present.
- [ 7.879986] using mwait in idle threads.
- [ 7.879990] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 7.879994] CPU: L2 cache: 2048K
- [ 7.880013] CPU: After all inits, caps: afe9fbff 00100000 00000000
00002940 0000c189 00000000 00000000
- [ 7.880047] Checking 'hlt' instruction... OK.
- [ 7.895750] SMP alternatives: switching to UP code
- [ 7.896126] Freeing SMP alternatives: 11k freed
- [ 7.896286] ACPI: Core revision 20060707
- [ 7.900856] CPU0: Intel Genuine Intel(R) CPU T1350 @ 1.86GHz
stepping 08
- [ 7.900895] Total of 1 processors activated (3729.35 BogoMIPS).
- [ 7.901233] ENABLING IO-APIC IRQs
- [ 7.901498] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 8.047350] Brought up 1 CPUs
- [ 8.047767] Booting paravirtualized kernel on bare hardware
- [ 8.047863] NET: Registered protocol family 16
- [ 8.048017] EISA bus registered
- [ 8.048020] ACPI: bus type pci registered
- [ 8.048045] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
- [ 8.048146] PCI: Not using MMCONFIG.
- [ 8.048385] PCI: PCI BIOS revision 2.10 entry at 0xfd823, last bus=4
- [ 8.048386] PCI: Using configuration type 1
- [ 8.048388] Setting up standard PCI resources
- [ 8.054356] ACPI: Interpreter enabled
- [ 8.054358] ACPI: Using IOAPIC for interrupt routing
- [ 8.055505] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
- [ 8.056157] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
- [ 8.056794] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
- [ 8.057526] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
- [ 8.058159] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
- [ 8.058792] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
- [ 8.059552] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
- [ 8.060184] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
- [ 8.060559] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 8.060563] PCI: Probing PCI hardware (bus 00)
- [ 8.061724] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
- [ 8.062048] Boot video device is 0000:00:02.0
- [ 8.063028] PCI quirk: region d800-d87f claimed by ICH6 ACPI/GPIO/TCO
- [ 8.063032] PCI quirk: region eec0-eeff claimed by ICH6 GPIO
- [ 8.064534] PCI: Transparent bridge - 0000:00:1e.0
- [ 8.064654] PCI: Bus #04 (-#07) is hidden behind transparent bridge #03
(-#04) (try 'pci=assign-busses')
- [ 8.064656] Please report the result to linux-kernel to fix this
permanently
- [ 8.064726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 8.069694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
- [ 8.074945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
- [ 8.075316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MPEX._PRT]
- [ 8.076635] Linux Plug and Play Support v0.97 (c) Adam Belay
- [ 8.076643] pnp: PnP ACPI init
- [ 8.088073] pnp: PnP ACPI: found 13 devices
- [ 8.088076] PnPBIOS: Disabled by ACPI PNP
- [ 8.088162] PCI: Using ACPI for IRQ routing
- [ 8.088164] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
- [ 8.088227] PCI: Cannot allocate resource region 0 of device 0000:02:00.0
- [ 8.100449] pnp: 00:09: ioport range 0x1e0-0x1ef has been reserved
- [ 8.100863] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
- [ 8.100921] PCI: Bridge: 0000:00:1c.0
- [ 8.100924] IO window: b000-bfff
- [ 8.100928] MEM window: ffc00000-ffcfffff
- [ 8.100949] PREFETCH window: disabled.
- [ 8.100980] PCI: Bridge: 0000:00:1c.2
- [ 8.100982] IO window: disabled.
- [ 8.100986] MEM window: 3a000000-3a0fffff
- [ 8.100990] PREFETCH window: disabled.
- [ 8.101024] PCI: Bus 4, cardbus bridge: 0000:03:0b.0
- [ 8.101043] IO window: 00001000-000010ff
- [ 8.101048] IO window: 00001400-000014ff
- [ 8.101052] PREFETCH window: 30000000-33ffffff
- [ 8.101056] MEM window: 34000000-37ffffff
- [ 8.101077] PCI: Bridge: 0000:00:1e.0
- [ 8.101080] IO window: 1000-1fff
- [ 8.101085] MEM window: 34000000-39ffffff
- [ 8.101088] PREFETCH window: 30000000-33ffffff
- [ 8.101145] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) ->
IRQ 16
- [ 8.101151] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 8.101201] PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
- [ 8.101205] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) ->
IRQ 17
- [ 8.101211] PCI: Setting latency timer of device 0000:00:1c.2 to 64
- [ 8.101238] PCI: Setting latency timer of device 0000:00:1e.0 to 64
- [ 8.101267] PCI: Enabling device 0000:03:0b.0 (0000 -> 0003)
- [ 8.101271] ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 21 (level, low) ->
IRQ 18
- [ 8.101309] NET: Registered protocol family 2
- [ 8.139226] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 8.139353] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
- [ 8.139546] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 8.139642] TCP: Hash tables configured (established 16384 bind 8192)
- [ 8.139661] TCP reno registered
- [ 8.151316] checking if image is initramfs... it is
- [ 9.383409] Freeing initrd memory: 6432k freed
- [ 9.383815] Simple Boot Flag at 0x7c set to 0x1
- [ 9.384418] audit: initializing netlink socket (disabled)
- [ 9.384447] audit(1170966417.664:1): initialized
- [ 9.384667] VFS: Disk quotas dquot_6.5.1
- [ 9.384701] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 9.384794] io scheduler noop registered
- [ 9.384796] io scheduler anticipatory registered
- [ 9.384798] io scheduler deadline registered
- [ 9.384821] io scheduler cfq registered (default)
- [ 9.385295] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 9.385368] assign_interrupt_mode Found MSI capability
- [ 9.385460] Allocate Port Service[0000:00:1c.0:pcie00]
- [ 9.385674] PCI: Setting latency timer of device 0000:00:1c.2 to 64
- [ 9.385746] assign_interrupt_mode Found MSI capability
- [ 9.385810] Allocate Port Service[0000:00:1c.2:pcie00]
- [ 9.386095] isapnp: Scanning for PnP cards...
- [ 9.750227] isapnp: No Plug & Play device found
- [ 9.792181] Real Time Clock Driver v1.12ac
- [ 9.792467] hpet_resources: 0xfed00000 is busy
- [ 9.792501] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
- [ 9.792780] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 9.794008] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 9.794352] mice: PS/2 mouse device common for all mice
- [ 9.795332] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
- [ 9.795654] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- [ 9.795676] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
- [ 9.796159] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
- [ 9.802330] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 9.802334] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 9.802623] EISA: Probing bus 0 at eisa.0
- [ 9.802630] Cannot allocate resource for EISA slot 1
- [ 9.802667] EISA: Detected 0 cards.
- [ 9.832806] TCP cubic registered
- [ 9.832829] NET: Registered protocol family 1
- [ 9.832834] NET: Registered protocol family 8
- [ 9.832836] NET: Registered protocol family 20
- [ 9.832896] Using IPI No-Shortcut mode
- [ 9.832997] ACPI: (supports S0 S3 S4 S5)
- [ 9.833444] Freeing unused kernel memory: 324k freed
- [ 9.836200] Time: tsc clocksource has been installed.
- [ 9.843014] input: AT Translated Set 2 keyboard as /class/input/input0
- [ 11.204335] Capability LSM initialized
- [ 11.257288] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
- [ 11.258767] ACPI: Thermal Zone [THRM] (42 C)
- [ 11.883054] usbcore: registered new interface driver usbfs
- [ 11.883090] usbcore: registered new interface driver hub
- [ 11.883141] usbcore: registered new device driver usb
- [ 11.884629] USB Universal Host Controller Interface driver v3.0
- [ 11.884749] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 19
- [ 11.884759] PCI: Setting latency timer of device 0000:00:1d.0 to 64
- [ 11.884780] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 11.885038] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
- [ 11.885098] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000afe0
- [ 11.885263] usb usb1: configuration #1 chosen from 1 choice
- [ 11.885315] hub 1-0:1.0: USB hub found
- [ 11.885319] hub 1-0:1.0: 2 ports detected
- [ 11.985406] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
- [ 11.985409] Copyright (c) 1999-2006 Intel Corporation.
- [ 11.988752] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 20
- [ 11.988781] PCI: Setting latency timer of device 0000:00:1d.1 to 64
- [ 11.988785] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 11.988820] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
- [ 11.988882] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000af80
- [ 11.989040] usb usb2: configuration #1 chosen from 1 choice
- [ 11.989093] hub 2-0:1.0: USB hub found
- [ 11.989098] hub 2-0:1.0: 2 ports detected
- [ 12.053274] SCSI subsystem initialized
- [ 12.062061] libata version 2.00 loaded.
- [ 12.092593] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 17
- [ 12.092622] PCI: Setting latency timer of device 0000:00:1d.2 to 64
- [ 12.092626] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 12.092680] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
- [ 12.092724] uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000af60
- [ 12.092906] usb usb3: configuration #1 chosen from 1 choice
- [ 12.092943] hub 3-0:1.0: USB hub found
- [ 12.092966] hub 3-0:1.0: 2 ports detected
- [ 12.118436] ieee1394: Initialized config rom entry `ip1394'
- [ 12.196439] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) ->
IRQ 21
- [ 12.196468] PCI: Setting latency timer of device 0000:00:1d.3 to 64
- [ 12.196472] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 12.196509] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
- [ 12.196571] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000af40
- [ 12.196730] usb usb4: configuration #1 chosen from 1 choice
- [ 12.196785] hub 4-0:1.0: USB hub found
- [ 12.196789] hub 4-0:1.0: 2 ports detected
- [ 12.301610] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 19
- [ 12.301644] PCI: Setting latency timer of device 0000:00:1d.7 to 64
- [ 12.301647] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 12.301702] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
- [ 12.301765] ehci_hcd 0000:00:1d.7: debug port 1
- [ 12.301771] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
- [ 12.301795] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffd3fc00
- [ 12.305699] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
- [ 12.305829] usb usb5: configuration #1 chosen from 1 choice
- [ 12.305867] hub 5-0:1.0: USB hub found
- [ 12.305889] hub 5-0:1.0: 8 ports detected
- [ 12.408393] PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
- [ 12.408420] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 21
- [ 12.408453] PCI: Setting latency timer of device 0000:01:00.0 to 64
- [ 12.470225] e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width
x1) 00:15:b7:85:07:5c
- [ 12.529848] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
- [ 12.530192] ata_piix 0000:00:1f.2: version 2.00ac7
- [ 12.530198] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
- [ 4.688000] Time: hpet clocksource has been installed.
- [ 4.788000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 20
- [ 4.788000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
- [ 4.788000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xAF10 irq 14
- [ 4.788000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xAF18 irq 15
- [ 4.788000] scsi0 : ata_piix
- [ 4.952000] ata1.00: ATA-7, max UDMA/100, 117210240 sectors: LBA48 NCQ
(depth 0/32)
- [ 4.952000] ata1.00: ata1: dev 0 multi count 16
- [ 4.960000] ata1.00: configured for UDMA/100
- [ 4.960000] scsi1 : ata_piix
- [ 5.152000] APIC error on CPU0: 00(40)
- [ 5.280000] ata2.00: ATAPI, max UDMA/33
- [ 5.444000] ata2.00: configured for UDMA/33
- [ 5.444000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2060B 0000
PQ: 0 ANSI: 5
- [ 5.444000] scsi 1:0:0:0: CD-ROM MATSHITA DVD/CDRW UJDA770 1.00
PQ: 0 ANSI: 5
- [ 5.452000] PCI: Enabling device 0000:03:0b.1 (0000 -> 0002)
- [ 5.452000] ACPI: PCI Interrupt 0000:03:0b.1[B] -> GSI 20 (level, low) ->
IRQ 22
- [ 5.456000] APIC error on CPU0: 40(40)
- [ 5.508000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]
MMIO=[38005000-380057ff] Max Packet=[2048] IR/IT contexts=[4/8]
- [ 5.532000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
- [ 5.532000] sda: Write Protect is off
- [ 5.532000] sda: Mode Sense: 00 3a 00 00
- [ 5.532000] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
- [ 5.532000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
- [ 5.532000] sda: Write Protect is off
- [ 5.532000] sda: Mode Sense: 00 3a 00 00
- [ 5.532000] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
- [ 5.532000] sda: sda1 sda2 sda3 sda4
- [ 5.640000] sd 0:0:0:0: Attached scsi disk sda
- [ 5.644000] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 5.644000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
- [ 5.648000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
- [ 5.648000] Uniform CD-ROM driver Revision: 3.20
- [ 5.648000] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 5.996000] Attempting manual resume
- [ 6.016000] EXT3-fs: INFO: recovery required on readonly filesystem.
- [ 6.016000] EXT3-fs: write access will be enabled during recovery.
- [ 6.780000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000039000097d500]
- [ 10.960000] APIC error on CPU0: 40(40)
- [ 14.388000] kjournald starting. Commit interval 5 seconds
- [ 14.388000] EXT3-fs: sda3: orphan cleanup on readonly fs
- [ 14.388000] ext3_orphan_cleanup: deleting unreferenced inode 668460
- [ 14.836000] ext3_orphan_cleanup: deleting unreferenced inode 589261
- [ 14.848000] ext3_orphan_cleanup: deleting unreferenced inode 229631
- [ 14.860000] ext3_orphan_cleanup: deleting unreferenced inode 228412
- [ 14.872000] ext3_orphan_cleanup: deleting unreferenced inode 232041
- [ 14.880000] ext3_orphan_cleanup: deleting unreferenced inode 232038
- [ 14.880000] ext3_orphan_cleanup: deleting unreferenced inode 232032
- [ 14.892000] ext3_orphan_cleanup: deleting unreferenced inode 228441
- [ 14.904000] ext3_orphan_cleanup: deleting unreferenced inode 230136
- [ 14.920000] ext3_orphan_cleanup: deleting unreferenced inode 228144
- [ 14.928000] ext3_orphan_cleanup: deleting unreferenced inode 1237896
- [ 14.936000] EXT3-fs: sda3: 11 orphan inodes deleted
- [ 14.936000] EXT3-fs: recovery complete.
- [ 14.952000] EXT3-fs: mounted filesystem with ordered data mode.
- [ 14.960000] APIC error on CPU0: 40(40)
- [ 25.684000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 25.688000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 26.144000] iTCO_vendor_support: vendor-support=0
- [ 26.148000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
- [ 26.148000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x5860)
- [ 26.148000] iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or
613 (TCO v2), using 30
- [ 26.148000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 26.184000] intel_rng: FWH not detected
- [ 26.728000] input: PC Speaker as /class/input/input1
- [ 27.004000] Linux agpgart interface v0.101 (c) Dave Jones
- [ 27.016000] agpgart: Detected an Intel 945GM Chipset.
- [ 27.016000] agpgart: Detected 7932K stolen memory.
- [ 27.056000] agpgart: AGP aperture is 256M @ 0xe0000000
- [ 27.824000] Yenta: CardBus bridge found at 0000:03:0b.0 [1179:0001]
- [ 27.824000] Yenta: Enabling burst memory read transactions
- [ 27.824000] Yenta: Using CSCINT to route CSC interrupts to PCI
- [ 27.824000] Yenta: Routing CardBus interrupts to PCI
- [ 27.824000] Yenta TI: socket 0000:03:0b.0, mfunc 0x01aa1022, devctl 0x64
- [ 27.888000] sdhci: Secure Digital Host Controller Interface driver, 0.12
- [ 27.888000] sdhci: Copyright(c) Pierre Ossman
- [ 27.948000] ieee80211_crypt: registered algorithm 'NULL'
- [ 27.952000] ieee80211: 802.11 data/management/control stack, git-1.1.13
- [ 27.952000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL
PROTECTED]>
- [ 28.056000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
- [ 28.056000] Socket status: 30000006
- [ 28.056000] Yenta: Raising subordinate bus# of parent bus (#03) from #04
to #07
- [ 28.056000] pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
- [ 28.056000] cs: IO port probe 0x1000-0x1fff: clean.
- [ 28.056000] pcmcia: parent PCI bridge Memory window: 0x34000000 -
0x39ffffff
- [ 28.056000] pcmcia: parent PCI bridge Memory window: 0x30000000 -
0x33ffffff
- [ 28.056000] sdhci: SDHCI controller found at 0000:03:0b.3 [104c:803c] (rev
0)
- [ 28.056000] PCI: Enabling device 0000:03:0b.3 (0000 -> 0002)
- [ 28.056000] ACPI: PCI Interrupt 0000:03:0b.3[D] -> GSI 23 (level, low) ->
IRQ 19
- [ 28.056000] sdhci:slot0: Controller reports > 25 MHz base clock, but no
high speed support.
- [ 28.056000] mmc0: SDHCI at 0x38005800 irq 19 DMA
- [ 28.240000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver
for Linux, 1.1.3mp
- [ 28.240000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
- [ 28.240000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) ->
IRQ 17
- [ 28.240000] PCI: Setting latency timer of device 0000:02:00.0 to 64
- [ 28.264000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
- [ 28.272000] pnp: Device 00:0c activated.
- [ 28.272000] parport: PnPBIOS parport detected.
- [ 28.272000] pnp: Device 00:0c disabled.
- [ 28.284000] input: PS/2 Mouse as /class/input/input2
- [ 28.316000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
- [ 29.116000] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
- [ 29.116000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) ->
IRQ 23
- [ 29.116000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
- [ 29.172000] cs: IO port probe 0x100-0x3af: clean.
- [ 29.172000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
- [ 29.248000] cs: IO port probe 0x820-0x8ff: clean.
- [ 29.248000] cs: IO port probe 0xc00-0xcf7: clean.
- [ 29.248000] cs: IO port probe 0xa00-0xaff: clean.
- [ 29.316000] hda_codec: Unknown model for ALC262, trying auto-probe from
BIOS...
- [ 29.820000] fuse init (API version 7.8)
- [ 29.896000] lp: driver loaded but no devices found
- [ 30.020000] Adding 1052248k swap on
/dev/disk/by-uuid/5e73c67e-544b-44ac-8baa-04ac43190a33. Priority:-1 extents:1
across:1052248k
- [ 30.296000] EXT3 FS on sda3, internal journal
- [ 31.068000] ipw3945: Radio Frequency Kill Switch is On:
- [ 31.068000] Kill switch must be turned off for wireless networking to work.
- [ 86.092000] NTFS driver 2.1.28 [Flags: R/O MODULE].
- [ 86.180000] NTFS volume version 3.1.
- [ 89.136000] input: Power Button (FF) as /class/input/input4
- [ 89.136000] ACPI: Power Button (FF) [PWRF]
- [ 89.188000] input: Lid Switch as /class/input/input5
- [ 89.188000] ACPI: Lid Switch [LID]
- [ 89.208000] input: Power Button (CM) as /class/input/input6
- [ 89.208000] ACPI: Power Button (CM) [PWRB]
- [ 89.520000] ibm_acpi: ec object not found
- [ 89.632000] Using specific hotkey driver
- [ 89.680000] No dock devices found.
- [ 89.720000] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
- [ 89.788000] ACPI: Battery Slot [BAT1] (battery present)
- [ 89.848000] ACPI: AC Adapter [ADP1] (on-line)
- [ 89.876000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
- [ 92.808000] ppdev: user-space parallel port driver
- [ 95.020000] [drm] Initialized drm 1.1.0 20060810
- [ 95.044000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) ->
IRQ 21
- [ 95.048000] [drm] Initialized i915 1.6.0 20060119 on minor 0
- [ 100.648000] apm: BIOS not found.
- [ 112.912000] Bluetooth: Core ver 2.11
- [ 112.912000] NET: Registered protocol family 31
- [ 112.912000] Bluetooth: HCI device and connection manager initialized
- [ 112.912000] Bluetooth: HCI socket layer initialized
- [ 113.052000] Bluetooth: L2CAP ver 2.8
- [ 113.052000] Bluetooth: L2CAP socket layer initialized
- [ 113.396000] Bluetooth: RFCOMM socket layer initialized
- [ 113.396000] Bluetooth: RFCOMM TTY layer initialized
- [ 113.396000] Bluetooth: RFCOMM ver 1.8
- [ 120.080000] APIC error on CPU0: 40(40)
- [ 133.344000] APIC error on CPU0: 40(40)
- [ 133.640000] APIC error on CPU0: 40(40)
- [ 162.284000] APIC error on CPU0: 40(40)
- [ 162.856000] APIC error on CPU0: 40(40)
- [ 164.320000] NET: Registered protocol family 10
- [ 164.320000] lo: Disabled Privacy Extensions
- [ 164.320000] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 165.132000] APIC error on CPU0: 40(40)
- [ 165.376000] APIC error on CPU0: 40(40)
- [ 166.172000] APIC error on CPU0: 40(40)
- [ 167.388000] APIC error on CPU0: 40(40)
- [ 167.916000] APIC error on CPU0: 40(40)
- [ 170.900000] ISO 9660 Extensions: Microsoft Joliet Level 3
- [ 170.952000] ISO 9660 Extensions: RRIP_1991A
- [ 183.076000] APIC error on CPU0: 40(40)
- [ 222.564000] APIC error on CPU0: 40(40)
- [ 224.572000] APIC error on CPU0: 40(40)
+ How to reproduce the problem:-
+ Boot using the Generic kernel without the Recovery one
+
+ dmesg shows the following error
--
APIC error on CPU0: 40(40)
https://launchpad.net/bugs/84204
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
