strangely, i did 5 installations yesterday, all identical hardware, only
one machine had this problem though.
[EMAIL PROTECTED]:/home/user# lspci -vv
0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0327
Subsystem: VIA Technologies, Inc.: Unknown device 0327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:00.1 Host bridge: VIA Technologies, Inc.: Unknown device 1327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:00.2 Host bridge: VIA Technologies, Inc.: Unknown device 2327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:00.5 PIC: VIA Technologies, Inc.: Unknown device 5327 (prog-if 20
[IO(X)-APIC])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x01 (4 bytes)
0000:00:00.6 Host bridge: VIA Technologies, Inc.: Unknown device 6327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x01 (4 bytes)
0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x01 (4 bytes)
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: dd000000-deffffff
Prefetchable memory behind bridge: d8000000-dbffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.0 PCI bridge: VIA Technologies, Inc.: Unknown device a327 (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x01 (4 bytes)
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: dfc00000-dfcfffff
Prefetchable memory behind bridge: 00000000dfb00000-00000000dfb00000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [4141]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable+
Address: 00000000fee00000 Data: 40c1
Capabilities: [88] #08 [a802]
Capabilities: [98] #0d [0000]
0000:00:03.0 PCI bridge: VIA Technologies, Inc.: Unknown device c327 (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x01 (4 bytes)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: 00000000dfd00000-00000000dfd00000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [4141]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable+
Address: 00000000fee00000 Data: 40c9
Capabilities: [88] #08 [a802]
Capabilities: [98] #0d [0000]
0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Foxconn International, Inc.: Unknown device 0c86
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 217
Region 0: I/O ports at fc00 [size=256]
Region 1: Memory at dffff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Foxconn International, Inc.: Unknown device 0c86
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin B routed to IRQ 209
Region 0: I/O ports at f800 [size=8]
Region 1: I/O ports at f400 [size=4]
Region 2: I/O ports at f000 [size=8]
Region 3: I/O ports at ec00 [size=4]
Region 4: I/O ports at e800 [size=16]
Region 5: I/O ports at e400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Subsystem: Foxconn International, Inc.: Unknown device 0c86
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 209
Region 4: I/O ports at e000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin A routed to IRQ 217
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin A routed to IRQ 217
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin B routed to IRQ 217
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin B routed to IRQ 217
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if
20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x20 (128 bytes)
Interrupt: pin C routed to IRQ 217
Region 0: Memory at dfffe000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
Subsystem: VIA Technologies, Inc. DFI KT600-AL Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: Foxconn International, Inc.: Unknown device 0c86
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 225
Region 0: I/O ports at cc00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: VIA Technologies, Inc.: Unknown device
3343 (rev 01) (prog-if 00 [VGA])
Subsystem: Foxconn International, Inc.: Unknown device 0c86
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at de000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
----------------------------------------------------------------------------------
[EMAIL PROTECTED]:/home/user# lspci -vvn
0000:00:00.0 0600: 1106:0327
Subsystem: 1106:0327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:00.1 0600: 1106:1327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:00.2 0600: 1106:2327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:00.3 0600: 1106:3327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:00.4 0600: 1106:4327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:00.5 0800: 1106:5327 (prog-if 20)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x01 (4 bytes)
0000:00:00.6 0600: 1106:6327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x01 (4 bytes)
0000:00:00.7 0600: 1106:7327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:01.0 0604: 1106:b198
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x01 (4 bytes)
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: dd000000-deffffff
Prefetchable memory behind bridge: d8000000-dbffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.0 0604: 1106:a327
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x01 (4 bytes)
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: dfc00000-dfcfffff
Prefetchable memory behind bridge: 00000000dfb00000-00000000dfb00000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [4141]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable+
Address: 00000000fee00000 Data: 40c1
Capabilities: [88] #08 [a802]
Capabilities: [98] #0d [0000]
0000:00:03.0 0604: 1106:c327
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x01 (4 bytes)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: 00000000dfd00000-00000000dfd00000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [4141]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable+
Address: 00000000fee00000 Data: 40c9
Capabilities: [88] #08 [a802]
Capabilities: [98] #0d [0000]
0000:00:09.0 0200: 10ec:8139 (rev 10)
Subsystem: 105b:0c86
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 217
Region 0: I/O ports at fc00 [size=256]
Region 1: Memory at dffff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.0 0101: 1106:3149 (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: 105b:0c86
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin B routed to IRQ 209
Region 0: I/O ports at f800 [size=8]
Region 1: I/O ports at f400 [size=4]
Region 2: I/O ports at f000 [size=8]
Region 3: I/O ports at ec00 [size=4]
Region 4: I/O ports at e800 [size=16]
Region 5: I/O ports at e400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.1 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: 105b:0c86
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 209
Region 4: I/O ports at e000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.0 0c03: 1106:3038 (rev 81)
Subsystem: 1106:3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin A routed to IRQ 217
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.1 0c03: 1106:3038 (rev 81)
Subsystem: 1106:3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin A routed to IRQ 217
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.2 0c03: 1106:3038 (rev 81)
Subsystem: 1106:3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin B routed to IRQ 217
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.3 0c03: 1106:3038 (rev 81)
Subsystem: 1106:3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin B routed to IRQ 217
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.4 0c03: 1106:3104 (rev 86) (prog-if 20)
Subsystem: 1106:3104
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x20 (128 bytes)
Interrupt: pin C routed to IRQ 217
Region 0: Memory at dfffe000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.0 0601: 1106:3227
Subsystem: 1106:3227
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.5 0401: 1106:3059 (rev 60)
Subsystem: 105b:0c86
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 225
Region 0: I/O ports at cc00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 0300: 1106:3343 (rev 01)
Subsystem: 105b:0c86
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at de000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
----------------------------------------------------------------------------------
[EMAIL PROTECTED]:/home/user# dmesg
[4294667.296000] Linux version 2.6.15-23-386 ([EMAIL PROTECTED]) (gcc version
4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
[4294667.296000] BIOS-e820: 000000001bef0000 - 000000001bef3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000001bef3000 - 000000001bf00000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 446MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f4050
[4294667.296000] On node 0 totalpages: 114416
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 110320 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 P4M890 ) @
0x000f7fe0
[4294667.296000] ACPI: RSDT (v001 P4M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x1bef3040
[4294667.296000] ACPI: FADT (v001 P4M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x1bef30c0
[4294667.296000] ACPI: MCFG (v001 P4M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x1bef9540
[4294667.296000] ACPI: MADT (v001 P4M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x1bef9440
[4294667.296000] ACPI: DSDT (v001 P4M890 AWRDACPI 0x00001000 MSFT 0x03000000) @
0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x408
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:4 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[4294667.296000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
[4294667.296000] IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 2 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 20000000 (gap:
1bf00000:c4100000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] mapped IOAPIC to ffffb000 (fecc0000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 2663.509 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294669.761000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)[4294669.762000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[4294669.770000] Memory: 442932k/457664k available (1976k kernel code, 14120k
reserved, 606k data, 288k init, 0k highmem)
[4294669.770000] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[4294669.830000] Calibrating delay using timer specific routine.. 5327.46
BogoMIPS (lpj=2663731)
[4294669.830000] Security Framework v1.0.0 initialized
[4294669.830000] SELinux: Disabled at boot.
[4294669.830000] Mount-cache hash table entries: 512
[4294669.830000] CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000651d 00000000 00000001
[4294669.830000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000
00000000 0000651d 00000000 00000001
[4294669.830000] monitor/mwait feature present.
[4294669.830000] using mwait in idle threads.
[4294669.830000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[4294669.830000] CPU: L2 cache: 256K
[4294669.830000] CPU: After all inits, caps: bfebfbff 20100000 00000000
00000080 0000651d 00000000 00000001
[4294669.830000] mtrr: v2.0 (20020519)
[4294669.830000] CPU: Intel(R) Celeron(R) CPU 2.66GHz stepping 09
[4294669.830000] Enabling fast FPU save and restore... done.
[4294669.830000] Enabling unmasked SIMD FPU exception support... done.
[4294669.830000] Checking 'hlt' instruction... OK.
[4294669.834000] checking if image is initramfs... it is
[4294670.442000] Freeing initrd memory: 6836k freed
[4294670.453000] ACPI: Looking for DSDT ... not found!
[4294670.459000] ENABLING IO-APIC IRQs
[4294670.459000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294670.570000] NET: Registered protocol family 16
[4294670.570000] EISA bus registered
[4294670.570000] ACPI: bus type pci registered
[4294670.574000] PCI: PCI BIOS revision 3.00 entry at 0xfa850, last bus=3
[4294670.574000] PCI: Using MMCONFIG
[4294670.575000] ACPI: Subsystem revision 20051216
[4294670.586000] ACPI: Interpreter enabled
[4294670.586000] ACPI: Using IOAPIC for interrupt routing
[4294670.587000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.587000] PCI: Probing PCI hardware (bus 00)
[4294670.593000] Boot video device is 0000:01:00.0
[4294670.594000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.699000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[4294670.700000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[4294670.701000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
[4294670.702000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[4294670.702000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[4294670.703000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[4294670.703000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[4294670.704000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0
[4294670.704000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[4294670.705000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 *10 11 12)
[4294670.706000] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[4294670.706000] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[4294670.707000] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[4294670.708000] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[4294670.712000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.712000] pnp: PnP ACPI init
[4294670.720000] pnp: PnP ACPI: found 16 devices
[4294670.720000] PnPBIOS: Disabled by ACPI PNP
[4294670.720000] PCI: Using ACPI for IRQ routing
[4294670.720000] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[4294670.754000] pnp: 00:00: ioport range 0x400-0x47f could not be reserved
[4294670.754000] pnp: 00:00: ioport range 0x500-0x50f has been reserved
[4294670.754000] PCI: Bridge: 0000:00:01.0
[4294670.754000] IO window: 9000-9fff
[4294670.754000] MEM window: dd000000-deffffff
[4294670.754000] PREFETCH window: d8000000-dbffffff
[4294670.754000] PCI: Bridge: 0000:00:02.0
[4294670.754000] IO window: b000-bfff
[4294670.754000] MEM window: dfc00000-dfcfffff
[4294670.754000] PREFETCH window: dfb00000-dfbfffff
[4294670.754000] PCI: Bridge: 0000:00:03.0
[4294670.754000] IO window: a000-afff
[4294670.754000] MEM window: dfe00000-dfefffff
[4294670.754000] PREFETCH window: dfd00000-dfdfffff
[4294670.754000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294670.754000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) ->
IRQ 169
[4294670.754000] PCI: Via IRQ fixup for 0000:00:02.0, from 10 to 9
[4294670.754000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4294670.754000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) ->
IRQ 177
[4294670.754000] PCI: Via IRQ fixup for 0000:00:03.0, from 10 to 1
[4294670.754000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[4294670.755000] audit: initializing netlink socket (disabled)
[4294670.755000] audit(1171434334.754:1): initialized
[4294670.755000] VFS: Disk quotas dquot_6.5.1
[4294670.755000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.755000] Initializing Cryptographic API
[4294670.755000] io scheduler noop registered
[4294670.755000] io scheduler anticipatory registered
[4294670.755000] io scheduler deadline registered
[4294670.755000] io scheduler cfq registered
[4294670.755000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[4294670.755000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) ->
IRQ 169
[4294670.755000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4294670.755000] assign_interrupt_mode Found MSI capability
[4294670.755000] Allocate Port Service[pcie00]
[4294670.756000] Allocate Port Service[pcie01]
[4294670.756000] Allocate Port Service[pcie02]
[4294670.756000] Allocate Port Service[pcie03]
[4294670.756000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) ->
IRQ 177
[4294670.756000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[4294670.756000] assign_interrupt_mode Found MSI capability
[4294670.756000] Allocate Port Service[pcie00]
[4294670.756000] Allocate Port Service[pcie01]
[4294670.756000] Allocate Port Service[pcie02]
[4294670.756000] Allocate Port Service[pcie03]
[4294670.756000] isapnp: Scanning for PnP cards...
[4294671.111000] isapnp: No Plug & Play device found
[4294671.138000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[4294671.150000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.151000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.151000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ
sharing enabled
[4294671.151000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.151000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.155000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.155000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.156000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[4294671.156000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.156000] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[4294671.156000] mice: PS/2 mouse device common for all mice
[4294671.158000] EISA: Probing bus 0 at eisa.0
[4294671.158000] EISA: Detected 0 cards.
[4294671.158000] NET: Registered protocol family 2
[4294671.172000] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)[4294671.172000] TCP established hash table entries: 16384 (order: 4,
65536 bytes)
[4294671.172000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.173000] TCP: Hash tables configured (established 16384 bind 16384)
[4294671.173000] TCP reno registered
[4294671.173000] TCP bic registered
[4294671.173000] NET: Registered protocol family 1
[4294671.173000] NET: Registered protocol family 8
[4294671.173000] NET: Registered protocol family 20
[4294671.173000] Using IPI Shortcut mode
[4294671.173000] ACPI wakeup devices:
[4294671.173000] SLPB PCI0 USB3 USB4 USB5 USB6 USB7 AC97 PEXG PEX0 UAR1
[4294671.173000] ACPI: (supports S0 S1 S4 S5)
[4294671.173000] Freeing unused kernel memory: 288k freed
[4294671.193000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294671.232000] vga16fb: initializing
[4294671.232000] vga16fb: mapped to 0xc00a0000
[4294671.380000] Console: switching to colour frame buffer device 80x25
[4294671.380000] fb0: VGA16 VGA frame buffer device
[4294672.400000] Capability LSM initialized
[4294672.538000] ACPI: Fan [FAN] (on)
[4294672.544000] ACPI: Thermal Zone [THRM] (40 C)
[4294673.317000] SCSI subsystem initialized
[4294673.319000] ACPI: bus type scsi registered
[4294673.319000] libata version 1.20 loaded.
[4294673.321000] sata_via 0000:00:0f.0: version 1.1
[4294673.321000] **** SET: Misaligned resource pointer: da595902 Type 07 Len 0
[4294673.322000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[4294673.322000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20
(level, low) -> IRQ 209
[4294673.322000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 1
[4294673.322000] sata_via 0000:00:0f.0: routed to hard irq line 1
[4294673.322000] ata1: SATA max UDMA/133 cmd 0xF800 ctl 0xF402 bmdma 0xE800 irq
209
[4294673.322000] ata2: SATA max UDMA/133 cmd 0xF000 ctl 0xEC02 bmdma 0xE808 irq
209
[4294673.523000] ata1: no device found (phy stat 00000000)
[4294673.523000] scsi0 : sata_via
[4294673.724000] ata2: no device found (phy stat 00000000)
[4294673.724000] scsi1 : sata_via
[4294673.742000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[4294673.742000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20
(level, low) -> IRQ 209
[4294673.742000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1
[4294673.742000] VP_IDE: chipset revision 6
[4294673.742000] VP_IDE: not 100% native mode: will probe irqs later
[4294673.742000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on
pci0000:00:0f.1
[4294673.742000] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA,
hdb:DMA
[4294673.742000] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio,
hdd:pio
[4294673.742000] Probing IDE interface ide0...
[4294674.128000] hda: MAXTOR STM3802110A, ATA DISK drive
[4294674.536000] hdb: TSSTcorp CD-ROM SH-C522C, ATAPI CD/DVD-ROM drive
[4294674.587000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294674.615000] Probing IDE interface ide1...
[4294675.141000] hda: max request size: 1024KiB
[4294675.179000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache,
CHS=16383/255/63, UDMA(100)
[4294675.204000] hda: cache flushes supported
[4294675.204000] hda: hda1 hda2 < hda5 >
[4294675.260000] hdb: ATAPI 52X CD-ROM drive, 96kB Cache, UDMA(33)
[4294675.260000] Uniform CD-ROM driver Revision: 3.20
[4294675.556000] usbcore: registered new driver usbfs
[4294675.556000] usbcore: registered new driver hub
[4294675.559000] USB Universal Host Controller Interface driver v2.3
[4294675.560000] **** SET: Misaligned resource pointer: dbcd8bc2 Type 07 Len 0
[4294675.560000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[4294675.560000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21
(level, low) -> IRQ 217
[4294675.560000] PCI: Via IRQ fixup for 0000:00:10.0, from 5 to 9
[4294675.560000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294675.562000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1
[4294675.562000] uhci_hcd 0000:00:10.0: irq 217, io base 0x0000dc00
[4294675.564000] hub 1-0:1.0: USB hub found
[4294675.564000] hub 1-0:1.0: 2 ports detected
[4294675.665000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21
(level, low) -> IRQ 217
[4294675.665000] PCI: Via IRQ fixup for 0000:00:10.1, from 5 to 9
[4294675.665000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294675.665000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 2
[4294675.665000] uhci_hcd 0000:00:10.1: irq 217, io base 0x0000d800
[4294675.665000] hub 2-0:1.0: USB hub found
[4294675.665000] hub 2-0:1.0: 2 ports detected
[4294675.766000] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21
(level, low) -> IRQ 217
[4294675.766000] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 9
[4294675.766000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294675.766000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 3
[4294675.766000] uhci_hcd 0000:00:10.2: irq 217, io base 0x0000d400
[4294675.766000] hub 3-0:1.0: USB hub found
[4294675.766000] hub 3-0:1.0: 2 ports detected
[4294675.867000] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21
(level, low) -> IRQ 217
[4294675.867000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 9
[4294675.867000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[4294675.867000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 4
[4294675.867000] uhci_hcd 0000:00:10.3: irq 217, io base 0x0000d000
[4294675.867000] hub 4-0:1.0: USB hub found
[4294675.867000] hub 4-0:1.0: 2 ports detected
[4294675.971000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21
(level, low) -> IRQ 217
[4294675.971000] PCI: Via IRQ fixup for 0000:00:10.4, from 11 to 9
[4294675.971000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[4294675.972000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 5
[4294675.972000] ehci_hcd 0000:00:10.4: irq 217, io mem 0xdfffe000
[4294675.972000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[4294675.972000] hub 5-0:1.0: USB hub found
[4294675.972000] hub 5-0:1.0: 8 ports detected
[4294676.099000] Probing IDE interface ide1...
[4294676.685000] Attempting manual resume
[4294676.756000] EXT3-fs: mounted filesystem with ordered data mode.
[4294676.758000] kjournald starting. Commit interval 5 seconds
[4294686.972000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294686.974000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294687.205000] 8139too Fast Ethernet driver 0.9.27
[4294687.205000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 21 (level, low) ->
IRQ 217
[4294687.205000] eth0: RealTek RTL8139 at 0xdc888000, 00:15:58:60:15:97, IRQ
217[4294687.205000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294687.221000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294687.470000] input: PC Speaker as /class/input/input1
[4294687.484000] Real Time Clock Driver v1.12
[4294687.575000] parport: PnPBIOS parport detected.
[4294687.575000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[4294687.626000] input: PS/2 Generic Mouse as /class/input/input2
[4294687.760000] **** SET: Misaligned resource pointer: d6b787c2 Type 07 Len 0
[4294687.760000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[4294687.760000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22
(level, low) -> IRQ 225
[4294687.760000] PCI: Via IRQ fixup for 0000:00:11.5, from 11 to 1
[4294687.760000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294687.892000] Floppy drive(s): fd0 is 1.44M
[4294687.907000] FDC 0 is a post-1991 82077
[4294688.487000] ts: Compaq touchscreen protocol output
[4294688.862000] eth0: link down
[4294689.224000] lp0: using parport0 (interrupt-driven).
[4294689.285000] Adding 1317288k swap on /dev/hda5. Priority:-1 extents:1
across:1317288k
[4294689.432000] EXT3 FS on hda1, internal journal
[4294689.592000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294689.592000] md: bitmap version 4.39
[4294690.517000] NET: Registered protocol family 17
[4294690.596000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL
PROTECTED]
[4294691.194000] cdrom: open failed.
[4294697.513000] ACPI: Power Button (FF) [PWRF]
[4294697.513000] ACPI: Power Button (CM) [PWRB]
[4294697.513000] ACPI: Sleep Button (CM) [SLPB]
[4294697.621000] ibm_acpi: ec object not found
[4294697.645000] pcc_acpi: loading...
[4294702.948000] ppdev: user-space parallel port driver
[4294703.211000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294703.211000] apm: overridden by ACPI.
[4294707.312000] Bluetooth: Core ver 2.8
[4294707.312000] NET: Registered protocol family 31
[4294707.312000] Bluetooth: HCI device and connection manager initialized
[4294707.312000] Bluetooth: HCI socket layer initialized
[4294707.371000] Bluetooth: L2CAP ver 2.8
[4294707.371000] Bluetooth: L2CAP socket layer initialized
[4294707.375000] Bluetooth: RFCOMM socket layer initialized
[4294707.375000] Bluetooth: RFCOMM TTY layer initialized
[4294707.375000] Bluetooth: RFCOMM ver 1.7
[4295242.103000] NET: Registered protocol family 10
[4295242.103000] lo: Disabled Privacy Extensions
[4295242.103000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4295242.103000] IPv6 over IPv4 tunneling driver
[4295283.279000] usb 5-7: new high speed USB device using ehci_hcd and address
2[4295283.837000] Initializing USB Mass Storage driver...
[4295283.838000] scsi2 : SCSI emulation for USB Mass Storage devices
[4295283.838000] usb-storage: device found at 2
[4295283.838000] usb-storage: waiting for device to settle before scanning
[4295283.838000] usbcore: registered new driver usb-storage
[4295283.838000] USB Mass Storage support registered.
[4295288.838000] Vendor: Ut163 Model: USB2FlashStorage Rev: 0.00
[4295288.838000] Type: Direct-Access ANSI SCSI
revision: 02
[4295288.842000] usb-storage: device scan complete
[4295288.891000] Driver 'sd' needs updating - please use bus_type methods
[4295288.893000] SCSI device sda: 983808 512-byte hdwr sectors (504 MB)
[4295288.895000] sda: Write Protect is off
[4295288.895000] sda: Mode Sense: 00 00 00 00
[4295288.895000] sda: assuming drive cache: write through
[4295288.899000] SCSI device sda: 983808 512-byte hdwr sectors (504 MB)
[4295288.900000] sda: Write Protect is off
[4295288.900000] sda: Mode Sense: 00 00 00 00
[4295288.900000] sda: assuming drive cache: write through
[4295288.900000] sda: sda1
[4295288.923000] sd 2:0:0:0: Attached scsi removable disk sda
[4295288.933000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[4295289.245000] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[4296348.090000] eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
[4296348.091000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[4296358.376000] eth0: no IPv6 routers present
--
flash stick opens cd rom
https://launchpad.net/bugs/84886
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
