I can confirm that on Y1, an image installed from beta and upgraded still works (running kernel 208.16). The same installed system on Y0 hangs.
Kernel boot messages: Starting kernel ... Uncompressing Linux......................................................................................................................................... ............................................................. done, booting the kernel. Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31-208-dove (bui...@korlan) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu7) ) #16-Ubuntu Tue Oct 13 20:33:31 UTC 2009 (Ubuntu 2.6.31-208.16-dove) CPU: ARMv7 Processor-wmmx-wco [560f5811] revision 1 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: Marvell DB-MV88F6781-BP Development Board Marvell Dove DRAM parameters found (version = 0x04030000) Memory policy: ECC disabled, Data cache writeback wait table c0983020 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536 Kernel command line: console=ttyS0,115200 root=/dev/sda2 rootdelay=2 PID hash table entries: 2048 (order: 11, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) allocated 1966080 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 384MB = 384MB total Memory: 380928KB available (5804K code, 649K data, 164K init, 0K highmem) NR_IRQS:135 Console: colour dummy device 80x30 Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696) Security Framework initialized AppArmor: AppArmor initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys freezer CPU: Testing write buffer coherency: ok regulator: core version 0.5 NET: Registered protocol family 16 Dove MV88F6781 SoC, TCLK = 167MHz PLiao: DOVE_MC @ 0x280 is 010E0202 PLiao: DOVE_MC @ 0x510 is 010E0101 Tauros2: Enabling L2 cache. Tauros2: L2 cache support initialised in ARMv7 mode. Setting gpu clock to 250000000 (divider: 8) Setting axi clock to 400000000 (divider: 5) Initializing USB0 Host Initializing USB1 Host LCD 0 disabled. Dove PCIe port 0: link down, ignoring Dove PCIe port 1: link down, ignoring bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb AppArmor: AppArmor Filesystem Enabled NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Power Management for Marvell Dove. PMU Detected Frequencies CPU 800Mhz, AXI 266Mhz, L2 400Mhz, DDR 400Mhz Dove hwmon thermal sensor initialized. cesadev_modinit cesadev_probe cesadev_init(c00601d0) mvCesaInit: sessions=640, queue=64, pSram=fdb10000 audit: initializing netlink socket (disabled) type=2000 audit(0.250:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) fuse init (API version 7.12) msgmni has been set to 744 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) dovedcon has been initialized. dovefb_display_init dovefb_display driver init ok. Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 7) is a 16550A console [ttyS0] enabled serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 8) is a 16550A brd: module loaded loop: module loaded sata_mv sata_mv.0: version 1.28 sata_mv sata_mv.0: slots 32 ports 1 scsi0 : sata_mv ata1: SATA max UDMA/133 irq 62 Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. sky2 driver version 1.23 MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth smi: probed ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 00000009, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 0000 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk net eth0: port 0 with MAC address 00:50:43:a1:1b:35 dove-nand dove-nand: Initialize NFC in 8bit mode with DMA Enabled, ECC Enabled, BCH Disabled NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit) Creating 3 MTD partitions on "NAND 2GiB 3,3V 8-bit": 0x000000000000-0x000000100000 : "UBoot" 0x000000100000-0x000000500000 : "UImage" 0x000000500000-0x000080000000 : "Root" orion_spi orion_spi.0: use polling mode m25p80 spi0.0: m25p64 (8192 Kbytes) orion_spi orion_spi.1: use interrupt mode ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion_spi orion_spi.1: use interrupt mode ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 24, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected orion-ehci orion-ehci.1: Marvell Orion EHCI orion-ehci orion-ehci.1: new USB bus registered, assigned bus number 2 orion-ehci orion-ehci.1: irq 25, io mem 0xf1051000 orion-ehci orion-ehci.1: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice input: gpio-keys as /devices/platform/gpio-keys.0/input/input0 rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 IRQ 133/rtc-mv: IRQF_DISABLED is not guaranteed on shared IRQs i2c /dev entries driver pca953x 0-0027: failed reading register Driver for 1-wire Dallas network protocol. 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko cpuidle: using governor ladder cpuidle: using governor menu sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: Requesting irq host->irq=35, host->irqn Registered led device: mmc0:: mmc0: SDHCI controller on sdhci-mv.0 [sdhci-mv.0] using DMA sdhci: Requesting irq host->irq=36, host->irqn Registered led device: mmc1:: mmc1: SDHCI controller on sdhci-mv.1 [sdhci-mv.1] using DMA mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver -- Regression in linux-mvl-dove 207 and later causes Y0 boards to hang seconds after booting https://bugs.launchpad.net/bugs/450940 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
