I opted to re-insert the old Hauppauge PVR-150 card into the computer one PCI slot above the Hauppauage HVR-1600.
I then put the transmitter/IR cable into the IR port on the PVR-150 and then turned the PC on. After doing so, Ubuntu/LIRC found the PVR-150 remote was attached and the remote is now working. However, the question is - why are both the HVR-1600 and the WinTV-Go Plus IR/Transmitters no longer being detected or working? Log of dmesg | grep "lirc" after putting in the PVR-150: [ 13.477963] lirc_dev: IR Remote Control driver registered, major 61 [ 13.824620] lirc_i2c: chip 0x10020 found @ 0x71 (Hauppauge PVR150) [ 13.824623] lirc_dev: lirc_register_driver: sample_rate: 10 This is not really a workaround for those who do not have a PVR-150. At least I have my main HTPC box up and going with the remote again, unfortunately with an extra tuner card I didn't want to put back in. And, then the HTPC box in the master bedroom no longer works with the remote - this is the one with the Hauppauge WinTV-Go Plus card in it. -- Hauppauge HVR-1600 Remote Not Detected https://bugs.launchpad.net/bugs/454371 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
