I cant get the WinTV card working with any applications: This is the output of dmesg | grep bttv0:
[ 10.309589] bttv0: Bt878 (rev 17) at 0000:03:06.0, irq: 20, latency: 32, mmio: 0xfdcff000 [ 10.309664] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 10.309667] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 10.309716] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] [ 10.312201] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 10.347030] bttv0: Hauppauge eeprom indicates model#44805 [ 10.347033] bttv0: tuner absent [ 10.347036] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 10.347666] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 10.348256] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 10.366966] bttv0: registered device video0 [ 10.367015] bttv0: registered device vbi0 [ 10.367047] bttv0: PLL: 28636363 => 35468950 .. ok [ 8069.712020] bttv0: timeout: drop=139 irq=65854/65856, risc=7d54a03c, bits: HSYNC OFLOW [ 8085.824532] bttv0: timeout: drop=197 irq=66972/66974, risc=7d54a03c, bits: HSYNC OFLOW As far as I can make out the card was correctly auto-detected as card no. 10: [ 10.309664] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 10.309667] bttv0: using: Hauppauge (bt878) [card=10,autodetected] I think the problem lies with tuner not being auto-detected: [ 10.347033] bttv0: tuner absent Iam running ubuntu 9.04 2.6.28-15 AMD64. -- Analog PCI-Card Hauppauge Win TV can't run!? https://bugs.launchpad.net/bugs/220194 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
