My dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (bui...@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] Command line: root=UUID=6a15e146-a48d-420f-9b2f-a458086a31b6 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009d800 (usable) [ 0.000000] modified: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] modified: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fff0000 @ 10000-14000 [ 0.000000] RAMDISK: 3786e000 - 37fef625 [ 0.000000] ACPI: RSDP 00000000000f81c0 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 000000007fff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007fff3180 0623B (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000007fff0000 00040 [ 0.000000] ACPI: SRAT 000000007fff94c0 00090 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: MCFG 000000007fff95c0 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000007fff9400 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] NUMA: Allocated memnodemap from 12000 - 13040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] NODE_DATA [0000000000013040 - 000000000001803f] [ 0.000000] bootmap [0000000000019000 - 0000000000028fff] pages 10 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 007fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e2ccc] TEXT DATA BSS ==> [0001000000 - 00019e2ccc] [ 0.000000] #3 [003786e000 - 0037fef625] RAMDISK ==> [003786e000 - 0037fef625] [ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] [ 0.000000] #5 [00019e3000 - 00019e307a] BRK ==> [00019e3000 - 00019e307a] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013040] MEMNODEMAP ==> [0000012000 - 0000013040] [ 0.000000] found SMP MP-table at [ffff8800000f3ba0] f3ba0 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524157 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3821 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513064 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff8800019f4000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516885 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=6a15e146-a48d-420f-9b2f-a458086a31b6 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 0 size 32 MB [ 0.000000] Memory: 2049736k/2097088k available (5313k kernel code, 460k absent, 46892k reserved, 3011k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2210.396 MHz processor. [ 0.000011] spurious 8259A interrupt: IRQ7. [ 0.001392] Console: colour VGA+ 80x25 [ 0.001395] console [tty0] enabled [ 0.010000] allocated 20971520 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.79 BogoMIPS (lpj=22103960) [ 0.010037] Security Framework initialized [ 0.010058] AppArmor: AppArmor initialized [ 0.010225] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011431] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.011994] Mount-cache hash table entries: 256 [ 0.012136] Initializing cgroup subsys ns [ 0.012141] Initializing cgroup subsys cpuacct [ 0.012144] Initializing cgroup subsys memory [ 0.012152] Initializing cgroup subsys freezer [ 0.012154] Initializing cgroup subsys net_cls [ 0.012166] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012168] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012172] CPU 0/0x0 -> Node 0 [ 0.012173] tseg: 0000000000 [ 0.012190] mce: CPU supports 5 MCE banks [ 0.012200] Performance Counters: AMD PMU driver. [ 0.012205] ... version: 0 [ 0.012206] ... bit width: 48 [ 0.012208] ... generic counters: 4 [ 0.012210] ... value mask: 0000ffffffffffff [ 0.012211] ... max period: 00007fffffffffff [ 0.012213] ... fixed-purpose counters: 0 [ 0.012215] ... counter mask: 000000000000000f [ 0.012228] SMP alternatives: switching to UP code [ 0.020012] ACPI: Core revision 20090521 [ 0.028344] Setting APIC routing to flat [ 0.028649] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.129290] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02 [ 0.130000] Brought up 1 CPUs [ 0.130000] Total of 1 processors activated (4420.79 BogoMIPS). [ 0.130000] CPU0 attaching NULL sched-domain. [ 0.130000] Booting paravirtualized kernel on bare hardware [ 0.130000] regulator: core version 0.5 [ 0.130000] Time: 11:06:21 Date: 10/25/09 [ 0.130000] NET: Registered protocol family 16 [ 0.130000] node 0 link 0: io port [6000, ffff] [ 0.130000] TOM: 0000000080000000 aka 2048M [ 0.130000] node 0 link 0: mmio [a0000, bffff] [ 0.130000] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.130000] node 0 link 0: mmio [80000000, febfffff] [ 0.130000] node 0 link 0: mmio [e0000000, e05fffff] [ 0.130000] bus: [00,05] on node 0 link 0 [ 0.130000] bus: 00 index 0 io port: [0, ffff] [ 0.130000] bus: 00 index 1 mmio: [a0000, bffff] [ 0.130000] bus: 00 index 2 mmio: [80000000, fcffffffff] [ 0.130000] ACPI: bus type pci registered [ 0.130000] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.130000] PCI: MCFG area at e0000000 reserved in E820 [ 0.130000] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.130000] PCI: Using configuration type 1 for base access [ 0.130000] bio: create slab <bio-0> at 0 [ 0.130000] ACPI: EC: Look up EC in DSDT [ 0.133131] ACPI: Interpreter enabled [ 0.133134] ACPI: (supports S0 S3 S4 S5) [ 0.133154] ACPI: Using IOAPIC for interrupt routing [ 0.140304] ACPI: No dock devices found. [ 0.141124] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.141226] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.141242] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc1f] [ 0.141250] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.141254] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.141264] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.141267] pci 0000:00:01.1: PME# disabled [ 0.141286] pci 0000:00:02.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff] [ 0.141303] pci 0000:00:02.0: supports D1 D2 [ 0.141305] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141307] pci 0000:00:02.0: PME# disabled [ 0.141325] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.141345] pci 0000:00:02.1: supports D1 D2 [ 0.141346] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141349] pci 0000:00:02.1: PME# disabled [ 0.141377] pci 0000:00:06.0: reg 20 io port: [0xe800-0xe80f] [ 0.141399] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7] [ 0.141403] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3] [ 0.141407] pci 0000:00:07.0: reg 18 io port: [0x970-0x977] [ 0.141410] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73] [ 0.141414] pci 0000:00:07.0: reg 20 io port: [0xd400-0xd40f] [ 0.141417] pci 0000:00:07.0: reg 24 32bit mmio: [0xfebfc000-0xfebfcfff] [ 0.141438] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7] [ 0.141442] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3] [ 0.141445] pci 0000:00:08.0: reg 18 io port: [0x960-0x967] [ 0.141449] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63] [ 0.141452] pci 0000:00:08.0: reg 20 io port: [0xc000-0xc00f] [ 0.141456] pci 0000:00:08.0: reg 24 32bit mmio: [0xfebfb000-0xfebfbfff] [ 0.141488] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfebfa000-0xfebfafff] [ 0.141491] pci 0000:00:0a.0: reg 14 io port: [0xbc00-0xbc07] [ 0.141506] pci 0000:00:0a.0: supports D1 D2 [ 0.141508] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141511] pci 0000:00:0a.0: PME# disabled [ 0.141537] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141540] pci 0000:00:0b.0: PME# disabled [ 0.141567] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141570] pci 0000:00:0c.0: PME# disabled [ 0.141597] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141599] pci 0000:00:0d.0: PME# disabled [ 0.141625] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141628] pci 0000:00:0e.0: PME# disabled [ 0.141727] pci 0000:01:07.0: reg 10 32bit mmio: [0xfeaff000-0xfeafffff] [ 0.141781] pci 0000:01:07.1: reg 10 32bit mmio: [0xfeafe000-0xfeafefff] [ 0.141835] pci 0000:01:0a.0: reg 10 io port: [0xac00-0xac1f] [ 0.141879] pci 0000:01:0a.1: reg 10 io port: [0xa800-0xa807] [ 0.141930] pci 0000:01:0b.0: reg 10 32bit mmio: [0xfe9ff000-0xfe9ff7ff] [ 0.141935] pci 0000:01:0b.0: reg 14 32bit mmio: [0xfe9f8000-0xfe9fbfff] [ 0.141961] pci 0000:01:0b.0: supports D1 D2 [ 0.141963] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.141966] pci 0000:01:0b.0: PME# disabled [ 0.141986] pci 0000:00:09.0: transparent bridge [ 0.141989] pci 0000:00:09.0: bridge io port: [0xa000-0xafff] [ 0.141991] pci 0000:00:09.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.141995] pci 0000:00:09.0: bridge 32bit mmio pref: [0xfea00000-0xfeafffff] [ 0.142027] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff] [ 0.142029] pci 0000:00:0b.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.142033] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfe700000-0xfe7fffff] [ 0.142065] pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff] [ 0.142068] pci 0000:00:0c.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff] [ 0.142072] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfe500000-0xfe5fffff] [ 0.142103] pci 0000:00:0d.0: bridge io port: [0x7000-0x7fff] [ 0.142106] pci 0000:00:0d.0: bridge 32bit mmio: [0xfe400000-0xfe4fffff] [ 0.142110] pci 0000:00:0d.0: bridge 64bit mmio pref: [0xfe300000-0xfe3fffff] [ 0.142132] pci 0000:05:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.142138] pci 0000:05:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.142145] pci 0000:05:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff] [ 0.142150] pci 0000:05:00.0: reg 24 io port: [0x6c00-0x6c7f] [ 0.142154] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.142201] pci 0000:00:0e.0: bridge io port: [0x6000-0x6fff] [ 0.142204] pci 0000:00:0e.0: bridge 32bit mmio: [0xfb000000-0xfdffffff] [ 0.142207] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.142220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.142426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.194439] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.194570] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.194701] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.194834] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.194963] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.195093] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.195225] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.195356] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.195486] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.195616] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.195747] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.195877] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.196011] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.196149] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.196291] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.196431] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.196581] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.196727] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.196872] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.197017] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.197107] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.197260] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.197413] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.197565] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.197717] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.197869] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.198026] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.198178] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.198330] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.198491] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.198650] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.198813] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.198992] SCSI subsystem initialized [ 0.199065] libata version 3.00 loaded. [ 0.199133] usbcore: registered new interface driver usbfs [ 0.199152] usbcore: registered new interface driver hub [ 0.199173] usbcore: registered new device driver usb [ 0.199280] ACPI: WMI: Mapper loaded [ 0.199282] PCI: Using ACPI for IRQ routing [ 0.199412] Bluetooth: Core ver 2.15 [ 0.199436] NET: Registered protocol family 31 [ 0.199438] Bluetooth: HCI device and connection manager initialized [ 0.199441] Bluetooth: HCI socket layer initialized [ 0.199443] NetLabel: Initializing [ 0.199444] NetLabel: domain hash size = 128 [ 0.199446] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.199458] NetLabel: unlabeled traffic allowed by default [ 0.200999] pnp: PnP ACPI init [ 0.201024] ACPI: bus type pnp registered [ 0.205851] pnp: PnP ACPI: found 14 devices [ 0.205853] ACPI: ACPI bus type pnp unregistered [ 0.205866] system 00:00: ioport range 0x1000-0x107f has been reserved [ 0.205869] system 00:00: ioport range 0x1080-0x10ff has been reserved [ 0.205872] system 00:00: ioport range 0x1400-0x147f has been reserved [ 0.205875] system 00:00: ioport range 0x1480-0x14ff has been reserved [ 0.205877] system 00:00: ioport range 0x1800-0x187f has been reserved [ 0.205880] system 00:00: ioport range 0x1880-0x18ff has been reserved [ 0.205886] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.205888] system 00:02: ioport range 0x800-0x807 has been reserved [ 0.205891] system 00:02: ioport range 0x290-0x30f has been reserved [ 0.205894] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.205900] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.205905] system 00:0d: iomem range 0xd1800-0xd3fff has been reserved [ 0.205908] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 0.205910] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 0.205913] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 0.205916] system 00:0d: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.205919] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved [ 0.205922] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.205925] system 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.205928] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.205930] system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.205933] system 00:0d: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.205936] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.205939] system 00:0d: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.205942] system 00:0d: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.210624] AppArmor: AppArmor Filesystem Enabled [ 0.210655] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.210658] pci 0000:00:09.0: IO window: 0xa000-0xafff [ 0.210662] pci 0000:00:09.0: MEM window: 0xfe900000-0xfe9fffff [ 0.210665] pci 0000:00:09.0: PREFETCH window: 0xfea00000-0xfeafffff [ 0.210668] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.210671] pci 0000:00:0b.0: IO window: 0x9000-0x9fff [ 0.210674] pci 0000:00:0b.0: MEM window: 0xfe800000-0xfe8fffff [ 0.210677] pci 0000:00:0b.0: PREFETCH window: 0x000000fe700000-0x000000fe7fffff [ 0.210681] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.210684] pci 0000:00:0c.0: IO window: 0x8000-0x8fff [ 0.210687] pci 0000:00:0c.0: MEM window: 0xfe600000-0xfe6fffff [ 0.210690] pci 0000:00:0c.0: PREFETCH window: 0x000000fe500000-0x000000fe5fffff [ 0.210694] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 [ 0.210696] pci 0000:00:0d.0: IO window: 0x7000-0x7fff [ 0.210699] pci 0000:00:0d.0: MEM window: 0xfe400000-0xfe4fffff [ 0.210702] pci 0000:00:0d.0: PREFETCH window: 0x000000fe300000-0x000000fe3fffff [ 0.210709] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05 [ 0.210711] pci 0000:00:0e.0: IO window: 0x6000-0x6fff [ 0.210714] pci 0000:00:0e.0: MEM window: 0xfb000000-0xfdffffff [ 0.210717] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.210725] pci 0000:00:09.0: setting latency timer to 64 [ 0.210730] pci 0000:00:0b.0: setting latency timer to 64 [ 0.210735] pci 0000:00:0c.0: setting latency timer to 64 [ 0.210739] pci 0000:00:0d.0: setting latency timer to 64 [ 0.210743] pci 0000:00:0e.0: setting latency timer to 64 [ 0.210747] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.210750] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.210753] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.210756] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff] [ 0.210758] pci_bus 0000:01: resource 2 pref mem [0xfea00000-0xfeafffff] [ 0.210761] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.210763] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.210766] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff] [ 0.210769] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff] [ 0.210771] pci_bus 0000:02: resource 2 pref mem [0xfe700000-0xfe7fffff] [ 0.210774] pci_bus 0000:03: resource 0 io: [0x8000-0x8fff] [ 0.210777] pci_bus 0000:03: resource 1 mem: [0xfe600000-0xfe6fffff] [ 0.210779] pci_bus 0000:03: resource 2 pref mem [0xfe500000-0xfe5fffff] [ 0.210782] pci_bus 0000:04: resource 0 io: [0x7000-0x7fff] [ 0.210784] pci_bus 0000:04: resource 1 mem: [0xfe400000-0xfe4fffff] [ 0.210787] pci_bus 0000:04: resource 2 pref mem [0xfe300000-0xfe3fffff] [ 0.210790] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff] [ 0.210792] pci_bus 0000:05: resource 1 mem: [0xfb000000-0xfdffffff] [ 0.210795] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.210833] NET: Registered protocol family 2 [ 0.210953] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.211777] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.213916] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.214458] TCP: Hash tables configured (established 262144 bind 65536) [ 0.214461] TCP reno registered [ 0.214561] NET: Registered protocol family 1 [ 0.214623] Trying to unpack rootfs image as initramfs... [ 0.220028] Switched to high resolution mode on CPU 0 [ 0.389748] Freeing initrd memory: 7685k freed [ 0.394112] Scanning for low memory corruption every 60 seconds [ 0.394247] audit: initializing netlink socket (disabled) [ 0.394262] type=2000 audit(1256468781.390:1): initialized [ 0.402789] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.404048] VFS: Disk quotas dquot_6.5.2 [ 0.404098] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.404647] fuse init (API version 7.12) [ 0.404728] msgmni has been set to 4018 [ 0.404918] alg: No test for stdrng (krng) [ 0.404928] io scheduler noop registered [ 0.404930] io scheduler anticipatory registered [ 0.404932] io scheduler deadline registered [ 0.404973] io scheduler cfq registered (default) [ 0.420092] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.420097] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 0.420104] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.420107] pci 0000:00:0b.0: Linking AER extended capability [ 0.420142] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.420147] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 0.420154] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.420156] pci 0000:00:0c.0: Linking AER extended capability [ 0.420194] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.420199] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 0.420206] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.420208] pci 0000:00:0d.0: Linking AER extended capability [ 0.420250] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.420255] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 0.420261] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.420264] pci 0000:00:0e.0: Linking AER extended capability [ 0.420284] pci 0000:05:00.0: Boot video device [ 0.420388] alloc irq_desc for 24 on node 0 [ 0.420390] alloc kstat_irqs on node 0 [ 0.420398] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X [ 0.420402] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 0.420485] alloc irq_desc for 25 on node 0 [ 0.420486] alloc kstat_irqs on node 0 [ 0.420491] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X [ 0.420495] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 0.420575] alloc irq_desc for 26 on node 0 [ 0.420577] alloc kstat_irqs on node 0 [ 0.420581] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X [ 0.420585] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 0.420663] alloc irq_desc for 27 on node 0 [ 0.420665] alloc kstat_irqs on node 0 [ 0.420669] pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X [ 0.420673] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 0.420729] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.420752] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.420861] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.420865] ACPI: Power Button [PWRF] [ 0.420917] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.420920] ACPI: Power Button [PWRB] [ 0.420968] fan PNP0C0B:00: registered as cooling_device0 [ 0.420972] ACPI: Fan [FAN] (on) [ 0.421483] processor LNXCPU:00: registered as cooling_device1 [ 0.425313] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.425319] ACPI: Thermal Zone [THRM] (29 C) [ 0.426256] Linux agpgart interface v0.103 [ 0.426267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.426355] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.426430] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.426634] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.426731] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.427563] brd: module loaded [ 0.427933] loop: module loaded [ 0.428009] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.428295] sata_nv 0000:00:07.0: version 3.5 [ 0.428660] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.428665] alloc irq_desc for 23 on node 0 [ 0.428667] alloc kstat_irqs on node 0 [ 0.428676] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.428723] sata_nv 0000:00:07.0: setting latency timer to 64 [ 0.428772] scsi0 : sata_nv [ 0.428859] scsi1 : sata_nv [ 0.428998] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 23 [ 0.429001] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 23 [ 0.429410] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.429413] alloc irq_desc for 22 on node 0 [ 0.429414] alloc kstat_irqs on node 0 [ 0.429420] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.429451] sata_nv 0000:00:08.0: setting latency timer to 64 [ 0.429505] scsi2 : sata_nv [ 0.429550] scsi3 : sata_nv [ 0.429677] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 22 [ 0.429679] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 22 [ 0.429772] pata_amd 0000:00:06.0: version 0.4.1 [ 0.429802] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.429862] ata3: SATA link down (SStatus 0 SControl 300) [ 0.429887] scsi4 : pata_amd [ 0.429948] scsi5 : pata_amd [ 0.430547] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14 [ 0.430549] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15 [ 0.431076] Fixed MDIO Bus: probed [ 0.431105] PPP generic driver version 2.4.2 [ 0.431201] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.431487] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 0.431491] alloc irq_desc for 21 on node 0 [ 0.431493] alloc kstat_irqs on node 0 [ 0.431501] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 0.431517] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.431520] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.431576] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.431601] ehci_hcd 0000:00:02.1: debug port 1 [ 0.431605] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.431623] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000 [ 0.450016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.450093] usb usb1: configuration #1 chosen from 1 choice [ 0.450119] hub 1-0:1.0: USB hub found [ 0.450125] hub 1-0:1.0: 10 ports detected [ 0.450203] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.450525] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 0.450530] alloc irq_desc for 20 on node 0 [ 0.450531] alloc kstat_irqs on node 0 [ 0.450539] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 0.450556] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.450558] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.450594] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.450620] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfebff000 [ 0.512067] usb usb2: configuration #1 chosen from 1 choice [ 0.512089] hub 2-0:1.0: USB hub found [ 0.512097] hub 2-0:1.0: 10 ports detected [ 0.512162] uhci_hcd: USB Universal Host Controller Interface driver [ 0.512273] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.512275] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.512646] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.512695] mice: PS/2 mouse device common for all mice [ 0.512771] rtc_cmos 00:04: RTC can wake from S4 [ 0.512802] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.512824] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.512910] device-mapper: uevent: version 1.0.3 [ 0.513016] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] [ 0.513058] device-mapper: multipath: version 1.1.0 loaded [ 0.513061] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.513173] cpuidle: using governor ladder [ 0.513175] cpuidle: using governor menu [ 0.513555] TCP cubic registered [ 0.513668] NET: Registered protocol family 10 [ 0.514059] lo: Disabled Privacy Extensions [ 0.514311] NET: Registered protocol family 17 [ 0.514329] Bluetooth: L2CAP ver 2.13 [ 0.514331] Bluetooth: L2CAP socket layer initialized [ 0.514334] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.514335] Bluetooth: SCO socket layer initialized [ 0.514370] Bluetooth: RFCOMM TTY layer initialized [ 0.514372] Bluetooth: RFCOMM socket layer initialized [ 0.514374] Bluetooth: RFCOMM ver 1.11 [ 0.514388] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00) [ 0.518753] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects [ 0.518822] PM: Resume from disk failed. [ 0.518839] registered taskstats version 1 [ 0.518979] Magic number: 13:134:126 [ 0.519031] acpi device:01: hash matches [ 0.519063] rtc_cmos 00:04: setting system clock to 2009-10-25 11:06:22 UTC (1256468782) [ 0.519066] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.519067] EDD information not available. [ 0.533008] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.580028] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.601180] ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 0.601183] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.620369] ata5.00: ATAPI: ATAPI DVD A DH20A1P, 6X16, max UDMA/66 [ 0.620392] ata5: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13) [ 0.620395] ata5.00: limited to UDMA/33 due to 40-wire cable [ 0.640381] ata1.00: configured for UDMA/133 [ 0.640474] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 [ 0.640575] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.640608] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 0.640653] sd 0:0:0:0: [sda] Write Protect is off [ 0.640655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.640675] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.640779] sda: sda1 sda2 sda3 [ 0.660202] ata5.00: configured for UDMA/33 [ 0.662959] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.800022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.820293] ata2.00: ATA-6: ST3160023AS, 3.00, max UDMA/133 [ 0.820296] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.860263] ata2.00: configured for UDMA/133 [ 0.860322] scsi 1:0:0:0: Direct-Access ATA ST3160023AS 3.00 PQ: 0 ANSI: 5 [ 0.860415] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 0.860442] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 0.860477] sd 1:0:0:0: [sdb] Write Protect is off [ 0.860480] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.860504] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.860598] sdb: [ 0.860689] ata4: SATA link down (SStatus 0 SControl 300) [ 0.861680] scsi 4:0:0:0: CD-ROM ATAPI DVD A DH20A1P 6X16 PQ: 0 ANSI: 5 [ 0.863145] sdb1 [ 0.863304] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.866627] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.866630] Uniform CD-ROM driver Revision: 3.20 [ 0.866683] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 0.866720] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 1.030917] Freeing unused kernel memory: 660k freed [ 1.031220] Write protecting the kernel read-only data: 7580k [ 1.060163] usb 2-9: new low speed USB device using ohci_hcd and address 2 [ 1.159687] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.160056] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 1.160063] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 1.160067] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.160127] nv_probe: set workaround bit for reversed mac addr [ 1.205148] FDC 0 is a post-1991 82077 [ 1.292814] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 1.292820] alloc irq_desc for 19 on node 0 [ 1.292823] alloc kstat_irqs on node 0 [ 1.292832] ohci1394 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 1.299120] usb 2-9: configuration #1 chosen from 1 choice [ 1.322231] usbcore: registered new interface driver hiddev [ 1.328313] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input4 [ 1.328379] generic-usb 0003:046D:C03F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-9/input0 [ 1.328396] usbcore: registered new interface driver usbhid [ 1.328399] usbhid: v2.6:USB HID core driver [ 1.350084] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fe9ff000-fe9ff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.690718] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x818 @ 1, addr 00:15:58:0e:84:0f [ 1.690723] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 2.319708] PM: Starting manual resume from disk [ 2.319712] PM: Resume from partition 8:2 [ 2.319714] PM: Checking hibernation image. [ 2.319904] PM: Resume from disk failed. [ 2.370058] kjournald starting. Commit interval 5 seconds [ 2.370073] EXT3-fs: mounted filesystem with writeback data mode. [ 2.670123] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00016c2000133707] [ 2.864396] type=1505 audit(1256468784.840:2): operation="profile_load" pid=431 name=/usr/share/gdm/guest-session/Xsession [ 2.876450] type=1505 audit(1256468784.850:3): operation="profile_load" pid=432 name=/sbin/dhclient3 [ 2.876720] type=1505 audit(1256468784.850:4): operation="profile_load" pid=432 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 2.876870] type=1505 audit(1256468784.850:5): operation="profile_load" pid=432 name=/usr/lib/connman/scripts/dhclient-script [ 2.900746] type=1505 audit(1256468784.880:6): operation="profile_load" pid=433 name=/usr/bin/evince [ 2.905078] type=1505 audit(1256468784.880:7): operation="profile_load" pid=433 name=/usr/bin/evince-previewer [ 2.907646] type=1505 audit(1256468784.880:8): operation="profile_load" pid=433 name=/usr/bin/evince-thumbnailer [ 2.927931] type=1505 audit(1256468784.900:9): operation="profile_load" pid=435 name=/usr/lib/cups/backend/cups-pdf [ 2.928262] type=1505 audit(1256468784.900:10): operation="profile_load" pid=435 name=/usr/sbin/cupsd [ 3.787140] Adding 2104504k swap on /dev/sda2. Priority:-1 extents:1 across:2104504k [ 4.004602] udev: starting version 147 [ 4.570254] EXT3 FS on sda1, internal journal [ 4.949089] kjournald starting. Commit interval 5 seconds [ 4.949278] EXT3 FS on sdb1, internal journal [ 4.949283] EXT3-fs: mounted filesystem with writeback data mode. [ 5.544591] kjournald starting. Commit interval 5 seconds [ 5.545069] EXT3 FS on sda3, internal journal [ 5.545074] EXT3-fs: mounted filesystem with writeback data mode. [ 6.857830] __ratelimit: 6 callbacks suppressed [ 6.857834] type=1505 audit(1256468788.830:13): operation="profile_replace" pid=769 name=/usr/share/gdm/guest-session/Xsession [ 6.859532] type=1505 audit(1256468788.830:14): operation="profile_replace" pid=770 name=/sbin/dhclient3 [ 6.859806] type=1505 audit(1256468788.830:15): operation="profile_replace" pid=770 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 6.859957] type=1505 audit(1256468788.830:16): operation="profile_replace" pid=770 name=/usr/lib/connman/scripts/dhclient-script [ 6.865113] type=1505 audit(1256468788.840:17): operation="profile_replace" pid=771 name=/usr/bin/evince [ 6.869422] type=1505 audit(1256468788.840:18): operation="profile_replace" pid=771 name=/usr/bin/evince-previewer [ 6.873203] type=1505 audit(1256468788.850:19): operation="profile_replace" pid=771 name=/usr/bin/evince-thumbnailer [ 6.880428] type=1505 audit(1256468788.860:20): operation="profile_replace" pid=774 name=/usr/lib/cups/backend/cups-pdf [ 6.880761] type=1505 audit(1256468788.860:21): operation="profile_replace" pid=774 name=/usr/sbin/cupsd [ 6.951983] type=1505 audit(1256468788.930:22): operation="profile_replace" pid=775 name=/usr/sbin/ntpd
-- EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. https://bugs.launchpad.net/bugs/422536 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
