if these are not what you asked that other guy for, let me know so I can
delete it and not fill this bug with spammm
---
Version
--
Ubuntu 2.6.28-16.55-generic
demsg
---
[ 0.507421] ACPI: PCI Interrupt Link [Z013] (IRQs 19 20 21 22 23) *0,
disabled.
[ 0.507616] ACPI: PCI Interrupt Link [Z014] (IRQs 19 20 21 22 23) *0,
disabled.
[ 0.507808] ACPI: PCI Interrupt Link [Z015] (IRQs 19 20 21 22 23) *0,
disabled.
[ 0.508008] ACPI: PCI Interrupt Link [LSMB] (IRQs 18) *10
[ 0.508202] ACPI: PCI Interrupt Link [LUS0] (IRQs 17) *11
[ 0.508395] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7
[ 0.508595] ACPI: PCI Interrupt Link [LMAC] (IRQs 19 20 21 22 23) *11
[ 0.508790] ACPI: PCI Interrupt Link [LAZA] (IRQs 19 20 21 22 23) *10
[ 0.508985] ACPI: PCI Interrupt Link [LGPU] (IRQs 19 20 21 22 23) *10
[ 0.509180] ACPI: PCI Interrupt Link [LPID] (IRQs 19 20 21 22 23) *0,
disabled.
[ 0.509378] ACPI: PCI Interrupt Link [LSI0] (IRQs 19 20 21 22 23) *11
[ 0.509573] ACPI: PCI Interrupt Link [LSI1] (IRQs 19 20 21 22 23) *0,
disabled.
[ 0.509769] ACPI: PCI Interrupt Link [Z010] (IRQs 16) *5
[ 0.509968] ACPI: PCI Interrupt Link [Z011] (IRQs 16) *10
[ 0.510161] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
[ 0.510387] ACPI: WMI: Mapper loaded
[ 0.510432] SCSI subsystem initialized
[ 0.510432] libata version 3.00 loaded.
[ 0.510432] usbcore: registered new interface driver usbfs
[ 0.510432] usbcore: registered new interface driver hub
[ 0.510432] usbcore: registered new device driver usb
[ 0.510432] PCI: Using ACPI for IRQ routing
[ 0.512532] Bluetooth: Core ver 2.13
[ 0.512532] NET: Registered protocol family 31
[ 0.512532] Bluetooth: HCI device and connection manager initialized
[ 0.512532] Bluetooth: HCI socket layer initialized
[ 0.512532] NET: Registered protocol family 8
[ 0.512532] NET: Registered protocol family 20
[ 0.512532] NetLabel: Initializing
[ 0.512532] NetLabel: domain hash size = 128
[ 0.512532] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.512532] NetLabel: unlabeled traffic allowed by default
[ 0.512532] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.512532] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.516082] AppArmor: AppArmor Filesystem Enabled
[ 0.520017] Switched to high resolution mode on CPU 0
[ 0.520651] Switched to high resolution mode on CPU 1
[ 0.520660] pnp: PnP ACPI init
[ 0.520669] ACPI: bus type pnp registered
[ 0.527357] pnp: PnP ACPI: found 12 devices
[ 0.527359] ACPI: ACPI bus type pnp unregistered
[ 0.527363] PnPBIOS: Disabled by ACPI PNP
[ 0.527373] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.527379] system 00:03: ioport range 0x360-0x361 has been reserved
[ 0.527382] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.527385] system 00:03: iomem range 0xff800000-0xff800fff has been reserved
[ 0.527392] system 00:0a: ioport range 0x1000-0x107f has been reserved
[ 0.527394] system 00:0a: ioport range 0x1080-0x10ff has been reserved
[ 0.527397] system 00:0a: ioport range 0x1200-0x127f has been reserved
[ 0.527400] system 00:0a: ioport range 0x1280-0x12ff has been reserved
[ 0.527402] system 00:0a: ioport range 0x1400-0x147f has been reserved
[ 0.527405] system 00:0a: ioport range 0x1480-0x14ff has been reserved
[ 0.527410] system 00:0b: iomem range 0xffc00000-0xffffffff could not be
reserved
[ 0.527413] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.527416] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be
reserved
[ 0.527419] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.527422] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
[ 0.562131] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.562134] pci 0000:00:08.0: IO window: disabled
[ 0.562139] pci 0000:00:08.0: MEM window: disabled
[ 0.562142] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.562150] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.562153] pci 0000:00:0b.0: IO window: 0x4000-0x4fff
[ 0.562157] pci 0000:00:0b.0: MEM window: 0xc1000000-0xc1ffffff
[ 0.562161] pci 0000:00:0b.0: PREFETCH window:
0x000000c4000000-0x000000dfffffff
[ 0.562399] pci 0000:00:14.0: PCI bridge, secondary bus 0000:07
[ 0.562401] pci 0000:00:14.0: IO window: disabled
[ 0.562411] pci 0000:00:14.0: MEM window: 0xc2000000-0xc20fffff
[ 0.562419] pci 0000:00:14.0: PREFETCH window: disabled
[ 0.562440] pci 0000:00:08.0: setting latency timer to 64
[ 0.562447] pci 0000:00:0b.0: setting latency timer to 64
[ 0.562756] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 23
[ 0.562766] pci 0000:00:14.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low)
-> IRQ 23
[ 0.562775] pci 0000:00:14.0: setting latency timer to 64
[ 0.562781] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.562783] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.562785] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.562787] bus: 01 index 1 mmio: [0x0-0x0]
[ 0.562789] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.562791] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.562793] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 0.562795] bus: 02 index 0 io port: [0x4000-0x4fff]
[ 0.562797] bus: 02 index 1 mmio: [0xc1000000-0xc1ffffff]
[ 0.562800] bus: 02 index 2 mmio: [0xc4000000-0xdfffffff]
[ 0.562802] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.562804] bus: 07 index 0 mmio: [0x0-0x0]
[ 0.562806] bus: 07 index 1 mmio: [0xc2000000-0xc20fffff]
[ 0.562807] bus: 07 index 2 mmio: [0x0-0x0]
[ 0.562809] bus: 07 index 3 mmio: [0x0-0x0]
[ 0.562821] NET: Registered protocol family 2
[ 0.573402] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.573680] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.574337] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.574631] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.574634] TCP reno registered
[ 0.577206] NET: Registered protocol family 1
[ 0.577335] checking if image is initramfs... it is
[ 1.001014] Clocksource tsc unstable (delta = 4397482150905 ns)
[ 1.133249] Freeing initrd memory: 7367k freed
[ 1.133288] Simple Boot Flag at 0x38 set to 0x1
[ 1.133449] cpufreq: No nForce2 chipset.
[ 1.133582] audit: initializing netlink socket (disabled)
[ 1.133599] type=2000 audit(1256738817.133:1): initialized
[ 1.141224] highmem bounce pool size: 64 pages
[ 1.141229] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.142408] VFS: Disk quotas dquot_6.5.1
[ 1.142462] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.143027] fuse init (API version 7.10)
[ 1.143101] msgmni has been set to 1678
[ 1.143306] alg: No test for stdrng (krng)
[ 1.143318] io scheduler noop registered
[ 1.143320] io scheduler anticipatory registered
[ 1.143322] io scheduler deadline registered
[ 1.143338] io scheduler cfq registered (default)
[ 1.143771] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.143806] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.143843] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.143879] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 1.143914] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.143977] pci 0000:00:14.0: Enabling HT MSI Mapping
[ 1.144035] pci 0000:02:00.0: Boot video device
[ 1.158081] pcieport-driver 0000:00:14.0: setting latency timer to 64
[ 1.158271] pcieport-driver 0000:00:14.0: found MSI capability
[ 1.158364] pcieport-driver 0000:00:14.0: irq 2303 for MSI/MSI-X
[ 1.158401] pci_express 0000:00:14.0:pcie00: allocate port service
[ 1.158576] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.158584] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.161340] ACPI: AC Adapter [ADP1] (on-line)
[ 1.269963] ACPI: Battery Slot [BAT0] (battery present)
[ 1.270036] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.270039] ACPI: Power Button (FF) [PWRF]
[ 1.270075] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.273600] ACPI: Lid Switch [LID0]
[ 1.273639] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.273645] ACPI: Sleep Button (CM) [SLPB]
[ 1.273697] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 1.273699] ACPI: Power Button (CM) [PWRB]
[ 1.273953] processor ACPI_CPU:00: registered as cooling_device0
[ 1.273985] processor ACPI_CPU:01: registered as cooling_device1
[ 1.329143] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.345532] ACPI: Thermal Zone [TZS0] (35 C)
[ 1.356315] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.360734] ACPI: Thermal Zone [TZS1] (33 C)
[ 1.360777] isapnp: Scanning for PnP cards...
[ 1.713772] isapnp: No Plug & Play device found
[ 1.725273] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.726153] brd: module loaded
[ 1.726425] loop: module loaded
[ 1.726493] Fixed MDIO Bus: probed
[ 1.726499] PPP generic driver version 2.4.2
[ 1.726553] input: Macintosh mouse button emulation as
/devices/virtual/input/i
lspci -vvnn
------
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory
Controller [10de:0754] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [94] HyperTransport: #1a
Capabilities: [60] HyperTransport: Retry Mode
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=0 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: [a]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD+
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz-
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE-
SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [d0] HyperTransport: #1c
00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 1a00 [size=256]
00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus
[10de:0752] (rev a1)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 3080 [size=64]
Region 4: I/O ports at 3040 [size=64]
Region 5: I/O ports at 3000 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200]
Co-Processor [10de:0753] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at c0080000 (32-bit, non-prefetchable) [size=512K]
00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory
Controller [10de:0568] (rev a1)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI
USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI
USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI
USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI
USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 16
Region 0: Memory at c0007400 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE
[10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Device [f03c:360a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 30c0 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
00:07.0 Audio device [0403]: nVidia Corporation MCP78S [GeForce 8200] High
Definition Audio [10de:0774] (rev a1)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge
[10de:075a] (rev a1) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA
Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 2302
Region 0: I/O ports at 30f0 [size=8]
Region 1: I/O ports at 30e4 [size=4]
Region 2: I/O ports at 30e8 [size=8]
Region 3: I/O ports at 30e0 [size=4]
Region 4: I/O ports at 30d0 [size=16]
Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] SATA HBA <?>
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3
Enable+
Address: 00000000fee0300c Data: 4161
Capabilities: [ec] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: ahci
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP78S [GeForce 8200]
Ethernet [10de:0760] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 2301
Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 30f8 [size=8]
Region 2: Memory at c0007c00 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at c0007800 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/4
Enable+
Address: 00000000fee0300c Data: 4191
Masking: 0000fffe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express
Bridge [10de:0569] (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c1000000-c1ffffff
Prefetchable memory behind bridge: 00000000c4000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Kernel modules: shpchp
00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge
[10de:077a] (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: c2000000-c20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
Enable+
Address: 00000000fee0300c Data: 4151
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surpise-
Slot # 5, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
HyperTransport Configuration [1022:1300] (rev 40)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
<EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: [a]
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD+
ExtRS- UCnfE-
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Address Map
[1022:1301]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h DRAM
Controller [1022:1302]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
Miscellaneous Control [1022:1303]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Link
Control [1022:1304]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8200M G
[10de:0845] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at c4000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 4000 [size=128]
[virtual] Expansion ROM at c6000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
07:00.0 Network controller [0280]: Atheros Communications Inc. AR928X Wireless
Network Adapter (PCI-Express) [168c:002a] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1381]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR-
<PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA
PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns,
L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency
L0 <512ns, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 128 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Vector table: BAR=0 offset=00000000
PBA: BAR=0 offset=00000000
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: ath9k
Kernel modules: ath9k
--
[ath9k] AR928X fails to reconnect to WEP/WPA network after suspend/resume
https://bugs.launchpad.net/bugs/324213
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
