My Epson rx520isn't recognize either.
I have just done a clean install of 9.10 64bit (I have tried on a 32bit as
well)and cannot get my Epson rx520 all-in-one to scan.
I have been using it in 9.04 and before all I had to do was to make sure that
libsane-extras & sane-utils were installed then it just worked.
I have tried System-Admin-User & Groups. Ticked the boxes in "saned" properties.
I have tried System-Admin-Printers. Enabled and shared the rx520
Run ls -l /dev/usb/ to show it is connected
Checked the epson2 backend/drivers are ok for the rx520
change /etc/udev/rules.d/45-libsane.rules to read
#Epson stylus RX520
SYSFS{idVendor}=="04b8", SYSFS{idProduct}=="081a", MODE="664", GROUP="scanner"
and changed /etc/udev/rules.d/51-scanner.rules to read:-
# libusb device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664", GROUP="admin"
I used "sudo sane-find-scanner" which gave:-
found USB scanner (vendor=0x04b8 [EPSON], product=0x081a [USB2.0
MFP(Hi-Speed)]) at libusb:001:006
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
and...@andrew-desktop:~$ scanimage -L
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable,
path=/, member=Introspect
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
--
Epson Stylus SX410 hybrid printer/scanner isn't in detected as a scanner by
xsane
https://bugs.launchpad.net/bugs/475185
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
