The included driver didn't work. Thats why I started doing this. On Mon, Nov 9, 2009 at 12:54 AM, Tormod Volden <[email protected]>wrote:
> The driver is included in the kernel, so you are not supposed to build > it yourself. Any particular reason you are doing this? > > ** Changed in: linux-wlan-ng (Ubuntu) > Status: New => Incomplete > > -- > SpeedStream 1022 is not working on Ubuntu 9.04, kernel 2.6.28-14-generic > https://bugs.launchpad.net/bugs/408673 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “linux-wlan-ng” package in Ubuntu: Incomplete > > Bug description: > Binary package hint: linux-wlan-ng > > > I compiled linux-wlan-ng from the svn repository. > It produced segfaults after loading the module prism2_usb. > > I changes following file: > src/p80211/p80211netdev.c > > in function wlan_setup: > > #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28) ) > dev = alloc_netdev(0,"wlan%d",ether_setup); > #else > dev = kmalloc(sizeof(netdevice_t), GFP_ATOMIC); > #endif > if ( dev == NULL ) { > WLAN_LOG_ERROR("Failed to alloc netdev.\n"); > result = 1; > } else { > #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ) > memset( dev, 0, sizeof(netdevice_t)); > ether_setup(dev); > #endif > ..... > if (dev->_tx == NULL) { > WLAN_LOG_ERROR("null pointer netif_stop_queue\n"); > result = 1; > } > else { > netif_stop_queue(dev); > } > ................ > sa...@sahoo-desktop:~/Documents/wlan-packages/linux-wlan-ng$ lsusb > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 004 Device 002: ID 067c:1022 Efficient Networks, Inc. Siemens > SpeedStream 1022 802.11b Adapter > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > #svn co svn://svn.shaftnet.org/linux-wlan-ng/trunk linux-wlan-ng > #cd linux-wlan-ng > #make config > ## edit files > ## Fix segfaults bugs > #make all > #sudo make install > > # Put USB > # blacklist prism2_usb because it segfaults and hangs > # /etc/modprobe.d/blacklist-wlan.conf > # > > sa...@sahoo-desktop:~/Documents/wlan-packages$ lsb_release -rd > Description: Ubuntu 9.04 > Release: 9.04 > sa...@sahoo-desktop:~/Documents/wlan-packages$ sudo modprobe prism2_usb > prism2_doreset=1 > sa...@sahoo-desktop:~/Documents/wlan-packages$ dmesg | less > ............ > [ 5139.896109] usb 4-2: reset full speed USB device using uhci_hcd and > address 2 > [ 5141.057340] hfa384x_usbctlx_complete_sync: CTLX[1] error: state(Request > failed) > [ 5143.061376] hfa384x_usbctlx_complete_sync: CTLX[1] error: state(Request > failed) > [ 5143.061392] hfa384x_drvr_start: cmd_initialize() failed on two attempts, > results -5 and -5 > [ 5143.062355] prism2sta_ifstate: hfa384x_drvr_start() failed,result=-5 > [ 5143.062453] usbcore: registered new interface driver prism2_usb > .......... > sa...@sahoo-desktop:~/Documents/wlan-packages$ sudo wlanctl-ng wlan0 > lnxreq_ifstate ifstate=enable > message=lnxreq_ifstate > ifstate=enable > resultcode=implementation_failure > -- SpeedStream 1022 is not working on Ubuntu 9.04, kernel 2.6.28-14-generic https://bugs.launchpad.net/bugs/408673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
