here is my dmesg.txt [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (bui...@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002bf70000 (usable) [ 0.000000] BIOS-e820: 000000002bf70000 - 000000002bf7c000 (ACPI data) [ 0.000000] BIOS-e820: 000000002bf7c000 - 000000002bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved) [ 0.000000] BIOS-e820: 000000003bf80000 - 000000003c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x2bf70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF8000000 write-back [ 0.000000] 2 base 028000000 mask FFC000000 write-back [ 0.000000] 3 base 02BF80000 mask FFFF80000 uncachable [ 0.000000] 4 base 03BF80000 mask FFFF80000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d8000 - 00000000000e0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000002bf70000 (usable) [ 0.000000] modified: 000000002bf70000 - 000000002bf7c000 (ACPI data) [ 0.000000] modified: 000000002bf7c000 - 000000002bf80000 (ACPI NVS) [ 0.000000] modified: 000000002bf80000 - 000000002c000000 (reserved) [ 0.000000] modified: 000000003bf80000 - 000000003c000000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000002bf70000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 002bc00000 page 2M [ 0.000000] 002bc00000 - 002bf70000 page 4k [ 0.000000] kernel direct mapping tables up to 2bf70000 @ 10000-15000 [ 0.000000] RAMDISK: 20960000 - 20fd3c74 [ 0.000000] ACPI: RSDP 000f6ab0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 2bf7529b 0002C (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 2bf7bf64 00074 (v01 ATI Salmon 06040000 ATI 000F4240) [ 0.000000] ACPI: DSDT 2bf752c7 06C9D (v01 ATI MS2_1535 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 2bf7cfc0 00040 [ 0.000000] ACPI: BOOT 2bf7bfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 703MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2bf70000 [ 0.000000] low ram: 0 - 2bf70000 [ 0.000000] node 0 low ram: 00000000 - 2bf70000 [ 0.000000] node 0 bootmap 00011000 - 000167f0 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002bf70000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [0020960000 - 0020fd3c74] RAMDISK ==> [0020960000 - 0020fd3c74] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac240] BRK ==> [00008a9000 - 00008ac240] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002bf70 [ 0.000000] HighMem 0x0002bf70 -> 0x0002bf70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002bf70 [ 0.000000] On node 0 totalpages: 179967 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1375 pages used for memmap [ 0.000000] Normal zone: 174609 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3c000000 (gap: 3c000000:c3f80000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1584000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 178560 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=4249a9bc-3d87-46c1-8d64-e30f13074e58 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3601280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 695152k/720320k available (4565k kernel code, 24504k reserved, 2143k data, 540k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xec770000 - 0xff7fe000 ( 304 MB) [ 0.000000] lowmem : 0xc0000000 - 0xebf70000 ( 703 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2658.142 MHz processor. [ 0.002549] Console: colour VGA+ 80x25 [ 0.002564] console [tty0] enabled [ 0.004028] Calibrating delay loop (skipped), value calculated using timer frequency.. 5316.28 BogoMIPS (lpj=10632568) [ 0.004091] Security Framework initialized [ 0.004157] AppArmor: AppArmor initialized [ 0.004183] Mount-cache hash table entries: 512 [ 0.004574] Initializing cgroup subsys ns [ 0.004591] Initializing cgroup subsys cpuacct [ 0.004606] Initializing cgroup subsys memory [ 0.004633] Initializing cgroup subsys freezer [ 0.004643] Initializing cgroup subsys net_cls [ 0.004699] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004710] CPU: L2 cache: 512K [ 0.004719] CPU: Hyper-Threading is disabled [ 0.004735] mce: CPU supports 4 MCE banks [ 0.004762] ------------[ cut here ]------------ [ 0.004796] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x33/0x40() [ 0.004806] Hardware name: Pavilion ze5300 (DK941A) [ 0.004813] Modules linked in: [ 0.004829] Pid: 0, comm: swapper Not tainted 2.6.31-14-generic #48-Ubuntu [ 0.004839] Call Trace: [ 0.004870] [<c014518d>] warn_slowpath_common+0x6d/0xa0 [ 0.004883] [<c011d7e3>] ? native_apic_write_dummy+0x33/0x40 [ 0.004897] [<c011d7e3>] ? native_apic_write_dummy+0x33/0x40 [ 0.004912] [<c01451d5>] warn_slowpath_null+0x15/0x20 [ 0.004924] [<c011d7e3>] native_apic_write_dummy+0x33/0x40 [ 0.004944] [<c011278c>] intel_init_thermal+0xac/0x1a0 [ 0.004956] [<c0111dbb>] mce_intel_feature_init+0xb/0x60 [ 0.004971] [<c010fcf0>] mce_cpu_features+0x10/0x40 [ 0.004994] [<c056ac3c>] mcheck_init+0x14a/0x188 [ 0.005006] [<c0569078>] ? init_hypervisor+0xb/0x2c [ 0.005020] [<c0569030>] identify_cpu+0x20e/0x21d [ 0.005042] [<c0795732>] identify_boot_cpu+0xd/0x23 [ 0.005054] [<c07958c8>] check_bugs+0xb/0xe9 [ 0.005074] [<c078e8c3>] start_kernel+0x2dc/0x2ec [ 0.005085] [<c078e406>] ? unknown_bootoption+0x0/0x1ab [ 0.005100] [<c078e07c>] i386_start_kernel+0x7c/0x83 [ 0.005131] ---[ end trace a7919e7f17c0a725 ]--- [ 0.005142] CPU0: Thermal monitoring enabled (TM1) [ 0.005171] Performance Counters: no PMU driver, software counters only. [ 0.005193] Checking 'hlt' instruction... OK. [ 0.022344] SMP alternatives: switching to UP code [ 0.040074] Freeing SMP alternatives: 19k freed [ 0.040142] ACPI: Core revision 20090521 [ 0.084689] ACPI: setting ELCR to 0200 (from 0420) [ 0.088134] weird, boot CPU (#0) not listed by the BIOS. [ 0.088137] SMP motherboard not detected. [ 0.088142] Local APIC not detected. Using dummy APIC emulation. [ 0.088145] SMP disabled [ 0.088432] Brought up 1 CPUs [ 0.088437] Total of 1 processors activated (5316.28 BogoMIPS). [ 0.088455] CPU0 attaching NULL sched-domain. [ 0.088836] Booting paravirtualized kernel on bare hardware [ 0.089123] regulator: core version 0.5 [ 0.089166] Time: 2:09:27 Date: 11/17/09 [ 0.089254] NET: Registered protocol family 16 [ 0.089488] EISA bus registered [ 0.089517] ACPI: bus type pci registered [ 0.147880] PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2 [ 0.147885] PCI: Using configuration type 1 for base access [ 0.149567] bio: create slab <bio-0> at 0 [ 0.150495] ACPI: EC: Look up EC in DSDT [ 0.164017] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.168229] ACPI: Interpreter enabled [ 0.168229] ACPI: (supports S0 S3 S4 S5) [ 0.168229] ACPI: Using PIC for interrupt routing [ 0.180550] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.180554] ACPI: EC: driver started in interrupt mode [ 0.180834] ACPI: No dock devices found. [ 0.182036] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.182104] pci 0000:00:00.0: reg 10 32bit mmio: [0xd4000000-0xd7ffffff] [ 0.182111] pci 0000:00:00.0: reg 14 32bit mmio: [0xd0007000-0xd0007fff] [ 0.182197] pci 0000:00:06.0: reg 10 io port: [0x1000-0x10ff] [ 0.182205] pci 0000:00:06.0: reg 14 32bit mmio: [0xd0000000-0xd0000fff] [ 0.182237] pci 0000:00:06.0: supports D1 D2 [ 0.182242] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold [ 0.182247] pci 0000:00:06.0: PME# disabled [ 0.182337] pci 0000:00:08.0: reg 10 32bit mmio: [0xd0001000-0xd0001fff] [ 0.182345] pci 0000:00:08.0: reg 14 io port: [0x1400-0x14ff] [ 0.182376] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.182381] pci 0000:00:08.0: PME# disabled [ 0.182414] pci 0000:00:09.0: reg 10 32bit mmio: [0xd0002000-0xd0003fff] [ 0.182447] pci 0000:00:09.0: supports D1 D2 [ 0.182451] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.182456] pci 0000:00:09.0: PME# disabled [ 0.182486] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd0004000-0xd0004fff] [ 0.182505] pci 0000:00:0a.0: supports D1 D2 [ 0.182508] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.182513] pci 0000:00:0a.0: PME# disabled [ 0.182555] pci 0000:00:0b.0: reg 20 io port: [0x2000-0x201f] [ 0.182578] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.182583] pci 0000:00:0b.0: PME# disabled [ 0.182626] pci 0000:00:0b.1: reg 20 io port: [0x2020-0x203f] [ 0.182648] pci 0000:00:0b.1: PME# supported from D0 D3hot D3cold [ 0.182654] pci 0000:00:0b.1: PME# disabled [ 0.182684] pci 0000:00:0b.2: reg 10 32bit mmio: [0xd0005000-0xd00050ff] [ 0.182719] pci 0000:00:0b.2: PME# supported from D0 D3hot D3cold [ 0.182724] pci 0000:00:0b.2: PME# disabled [ 0.182761] pci 0000:00:0c.0: reg 10 32bit mmio: [0xd0005800-0xd0005fff] [ 0.182769] pci 0000:00:0c.0: reg 14 32bit mmio: [0xd0008000-0xd000bfff] [ 0.182802] pci 0000:00:0c.0: supports D1 D2 [ 0.182806] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot [ 0.182811] pci 0000:00:0c.0: PME# disabled [ 0.182855] pci 0000:00:10.0: reg 20 io port: [0x2040-0x204f] [ 0.182926] pci 0000:00:11.0: quirk: region 8000-803f claimed by ali7101 ACPI [ 0.182931] pci 0000:00:11.0: quirk: region 8040-805f claimed by ali7101 SMB [ 0.182966] pci 0000:00:12.0: reg 10 io port: [0x2400-0x24ff] [ 0.182974] pci 0000:00:12.0: reg 14 32bit mmio: [0xd0006000-0xd0006fff] [ 0.182995] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.183011] pci 0000:00:12.0: supports D1 D2 [ 0.183015] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.183020] pci 0000:00:12.0: PME# disabled [ 0.183080] pci 0000:01:05.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] [ 0.183088] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff] [ 0.183095] pci 0000:01:05.0: reg 18 32bit mmio: [0xd0300000-0xd030ffff] [ 0.183111] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.183131] pci 0000:01:05.0: supports D1 D2 [ 0.183164] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] [ 0.183170] pci 0000:00:01.0: bridge 32bit mmio: [0xd0300000-0xd03fffff] [ 0.183175] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.183198] pci_bus 0000:00: on NUMA node 0 [ 0.183204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.183305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.186397] ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10) *0, disabled. [ 0.186580] ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10) [ 0.186757] ACPI: PCI Interrupt Link [LNK2] (IRQs 7 *10) [ 0.186933] ACPI: PCI Interrupt Link [LNK3] (IRQs 7 *10) [ 0.187112] ACPI: PCI Interrupt Link [LNK4] (IRQs 7 10) *0, disabled. [ 0.187290] ACPI: PCI Interrupt Link [LNK5] (IRQs 7 *11) [ 0.187466] ACPI: PCI Interrupt Link [LNK6] (IRQs 7 10) *0, disabled. [ 0.187645] ACPI: PCI Interrupt Link [LNK7] (IRQs *5) [ 0.187820] ACPI: PCI Interrupt Link [LNK8] (IRQs 7 10) *0, disabled. [ 0.188146] SCSI subsystem initialized [ 0.188280] libata version 3.00 loaded. [ 0.188408] usbcore: registered new interface driver usbfs [ 0.188436] usbcore: registered new interface driver hub [ 0.188474] usbcore: registered new device driver usb [ 0.188698] ACPI: WMI: Mapper loaded [ 0.188702] PCI: Using ACPI for IRQ routing [ 0.188928] Bluetooth: Core ver 2.15 [ 0.188978] NET: Registered protocol family 31 [ 0.188981] Bluetooth: HCI device and connection manager initialized [ 0.188987] Bluetooth: HCI socket layer initialized [ 0.188990] NetLabel: Initializing [ 0.188994] NetLabel: domain hash size = 128 [ 0.188996] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.189021] NetLabel: unlabeled traffic allowed by default [ 0.191833] pnp: PnP ACPI init [ 0.191886] ACPI: bus type pnp registered [ 0.194177] pnp 00:07: io resource (0x8004-0x8005) overlaps 0000:00:11.0 BAR 13 (0x8000-0x803f), disabling [ 0.197642] pnp: PnP ACPI: found 11 devices [ 0.197646] ACPI: ACPI bus type pnp unregistered [ 0.197654] PnPBIOS: Disabled by ACPI PNP [ 0.197680] system 00:07: ioport range 0x40b-0x40b has been reserved [ 0.197684] system 00:07: ioport range 0x480-0x48f has been reserved [ 0.197689] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.197694] system 00:07: ioport range 0x4d6-0x4d6 has been reserved [ 0.197699] system 00:07: ioport range 0x8000-0x807f could not be reserved [ 0.197704] system 00:07: ioport range 0xff00-0xff01 has been reserved [ 0.197709] system 00:07: ioport range 0x80f0-0x80f3 has been reserved [ 0.197714] system 00:07: ioport range 0xfe00-0xfefe has been reserved [ 0.197721] system 00:07: iomem range 0xd0007000-0xd0007fff has been reserved [ 0.232500] AppArmor: AppArmor Filesystem Enabled [ 0.232561] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.232566] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.232572] pci 0000:00:01.0: MEM window: 0xd0300000-0xd03fffff [ 0.232578] pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff [ 0.232584] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02 [ 0.232588] pci 0000:00:0a.0: IO window: 0x001800-0x0018ff [ 0.232594] pci 0000:00:0a.0: IO window: 0x001c00-0x001cff [ 0.232600] pci 0000:00:0a.0: PREFETCH window: 0x3c000000-0x3fffffff [ 0.232605] pci 0000:00:0a.0: MEM window: 0x40000000-0x43ffffff [ 0.232626] pci 0000:00:0a.0: enabling device (0005 -> 0007) [ 0.232904] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11 [ 0.232909] PCI: setting IRQ 11 as level-triggered [ 0.232916] pci 0000:00:0a.0: PCI INT A -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11 [ 0.232927] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.232931] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.232936] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.232941] pci_bus 0000:01: resource 1 mem: [0xd0300000-0xd03fffff] [ 0.232945] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] [ 0.232950] pci_bus 0000:02: resource 0 io: [0x1800-0x18ff] [ 0.232954] pci_bus 0000:02: resource 1 io: [0x1c00-0x1cff] [ 0.232959] pci_bus 0000:02: resource 2 pref mem [0x3c000000-0x3fffffff] [ 0.232963] pci_bus 0000:02: resource 3 mem: [0x40000000-0x43ffffff] [ 0.233029] NET: Registered protocol family 2 [ 0.233177] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.233708] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.235416] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.236558] TCP: Hash tables configured (established 131072 bind 65536) [ 0.236569] TCP reno registered [ 0.236819] NET: Registered protocol family 1 [ 0.236959] Trying to unpack rootfs image as initramfs... [ 0.470030] Freeing initrd memory: 6607k freed [ 0.485045] Simple Boot Flag at 0x37 set to 0x1 [ 0.485188] cpufreq-nforce2: No nForce2 chipset. [ 0.485256] Scanning for low memory corruption every 60 seconds [ 0.485457] audit: initializing netlink socket (disabled) [ 0.485494] type=2000 audit(1258423767.484:1): initialized [ 0.494645] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.496468] VFS: Disk quotas dquot_6.5.2 [ 0.496554] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.497308] fuse init (API version 7.12) [ 0.497426] msgmni has been set to 1371 [ 0.497764] alg: No test for stdrng (krng) [ 0.497786] io scheduler noop registered [ 0.497790] io scheduler anticipatory registered [ 0.497793] io scheduler deadline registered [ 0.497867] io scheduler cfq registered (default) [ 0.497909] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 0.497968] pci 0000:01:05.0: Boot video device [ 0.498122] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.498159] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.498638] ACPI: AC Adapter [ACAD] (on-line) [ 0.498764] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.498771] ACPI: Power Button [PWRF] [ 0.498851] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.498855] ACPI: Power Button [PWRB] [ 0.498914] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.502297] ACPI: Lid Switch [LID] [ 0.502634] Marking TSC unstable due to TSC halts in idle [ 0.502660] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.502707] processor LNXCPU:00: registered as cooling_device0 [ 0.504074] Switched to high resolution mode on CPU 0 [ 0.512497] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.512539] ACPI: Thermal Zone [THRM] (60 C) [ 0.512802] isapnp: Scanning for PnP cards... [ 0.519103] ACPI: Battery Slot [BAT1] (battery absent) [ 0.872929] isapnp: No Plug & Play device found [ 0.877439] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.877845] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.878777] serial 0000:00:08.0: enabling device (0000 -> 0003) [ 0.879547] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10 [ 0.879560] PCI: setting IRQ 10 as level-triggered [ 0.879580] serial 0000:00:08.0: PCI INT A -> Link[LNK6] -> GSI 10 (level, low) -> IRQ 10 [ 0.879601] serial 0000:00:08.0: PCI INT A disabled [ 0.883043] brd: module loaded [ 0.884698] loop: module loaded [ 0.885094] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.886088] pata_ali 0000:00:10.0: can't derive routing for PCI INT A [ 0.886593] scsi0 : pata_ali [ 0.887009] scsi1 : pata_ali [ 0.887831] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2040 irq 14 [ 0.887841] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15 [ 0.890534] Fixed MDIO Bus: probed [ 0.890690] PPP generic driver version 2.4.2 [ 0.891146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.891223] ehci_hcd 0000:00:0b.2: enabling device (0010 -> 0012) [ 0.891256] ehci_hcd 0000:00:0b.2: PCI INT C -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11 [ 0.891335] ehci_hcd 0000:00:0b.2: EHCI Host Controller [ 0.891574] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1 [ 0.891720] ehci_hcd 0000:00:0b.2: irq 11, io mem 0xd0005000 [ 0.900120] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95 [ 0.900471] usb usb1: configuration #1 chosen from 1 choice [ 0.900602] hub 1-0:1.0: USB hub found [ 0.900641] hub 1-0:1.0: 4 ports detected [ 0.900873] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.900971] uhci_hcd: USB Universal Host Controller Interface driver [ 0.901946] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10 [ 0.901963] uhci_hcd 0000:00:0b.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10 [ 0.901999] uhci_hcd 0000:00:0b.0: UHCI Host Controller [ 0.902199] uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.902280] uhci_hcd 0000:00:0b.0: irq 10, io base 0x00002000 [ 0.902605] usb usb2: configuration #1 chosen from 1 choice [ 0.902706] hub 2-0:1.0: USB hub found [ 0.902767] hub 2-0:1.0: 2 ports detected [ 0.903586] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10 [ 0.903602] uhci_hcd 0000:00:0b.1: PCI INT B -> Link[LNK3] -> GSI 10 (level, low) -> IRQ 10 [ 0.903623] uhci_hcd 0000:00:0b.1: UHCI Host Controller [ 0.903800] uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3 [ 0.903860] uhci_hcd 0000:00:0b.1: irq 10, io base 0x00002020 [ 0.904265] usb usb3: configuration #1 chosen from 1 choice [ 0.904370] hub 3-0:1.0: USB hub found [ 0.904400] hub 3-0:1.0: 2 ports detected [ 0.904788] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.907876] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.907903] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.908235] mice: PS/2 mouse device common for all mice [ 0.908822] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.908888] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.909332] device-mapper: uevent: version 1.0.3 [ 0.909756] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] [ 0.910077] device-mapper: multipath: version 1.1.0 loaded [ 0.910089] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.910600] EISA: Probing bus 0 at eisa.0 [ 0.910627] Cannot allocate resource for EISA slot 1 [ 0.910639] Cannot allocate resource for EISA slot 2 [ 0.910694] Cannot allocate resource for EISA slot 8 [ 0.910702] EISA: Detected 0 cards. [ 0.911011] cpuidle: using governor ladder [ 0.911195] cpuidle: using governor menu [ 0.913131] TCP cubic registered [ 0.913564] NET: Registered protocol family 10 [ 0.914954] lo: Disabled Privacy Extensions [ 0.915885] NET: Registered protocol family 17 [ 0.915974] Bluetooth: L2CAP ver 2.13 [ 0.915982] Bluetooth: L2CAP socket layer initialized [ 0.915995] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.916003] Bluetooth: SCO socket layer initialized [ 0.916251] Bluetooth: RFCOMM TTY layer initialized [ 0.916260] Bluetooth: RFCOMM socket layer initialized [ 0.916268] Bluetooth: RFCOMM ver 1.11 [ 0.916417] Using IPI No-Shortcut mode [ 0.916719] PM: Resume from disk failed. [ 0.916774] registered taskstats version 1 [ 0.917251] Magic number: 1:134:157 [ 0.917340] bdi 1:9: hash matches [ 0.917622] rtc_cmos 00:02: setting system clock to 2009-11-17 02:09:28 UTC (1258423768) [ 0.917635] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.917643] EDD information not available. [ 0.943094] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.056917] ata1.00: ATA-5: IC25N040ATCS04-0, CA4OA71A, max UDMA/100 [ 1.056932] ata1.00: 78140160 sectors, multi 16: LBA [ 1.072762] ata1.00: configured for UDMA/100 [ 1.073253] scsi 0:0:0:0: Direct-Access ATA IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5 [ 1.073816] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.074001] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.074172] sd 0:0:0:0: [sda] Write Protect is off [ 1.074182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.074269] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.074771] sda: sda1 sda2 < sda5 > [ 1.123442] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.212106] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 1.236640] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R2312, 1905, max MWDMA2 [ 1.236724] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled [ 1.236735] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 1.252559] ata2.00: configured for MWDMA2 [ 1.259068] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R2312 1905 PQ: 0 ANSI: 5 [ 1.267635] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.267649] Uniform CD-ROM driver Revision: 3.20 [ 1.268103] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.268356] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.268446] Freeing unused kernel memory: 540k freed [ 1.270032] Write protecting the kernel text: 4568k [ 1.270129] Write protecting the kernel read-only data: 1836k [ 1.416630] usb 1-2: configuration #1 chosen from 1 choice [ 2.314810] Floppy drive(s): fd0 is 1.44M [ 2.332442] FDC 0 is a post-1991 82077 [ 2.440812] b43-pci-bridge 0000:00:09.0: enabling device (0000 -> 0002) [ 2.440852] b43-pci-bridge 0000:00:09.0: PCI INT A -> Link[LNK3] -> GSI 10 (level, low) -> IRQ 10 [ 2.444598] ssb: Sonics Silicon Backplane found on PCI device 0000:00:09.0 [ 2.621688] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 2.621696] originally by Donald Becker <[email protected]> [ 2.621700] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 2.622742] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10 [ 2.622763] natsemi 0000:00:12.0: PCI INT A -> Link[LNK1] -> GSI 10 (level, low) -> IRQ 10 [ 2.626711] natsemi eth0: NatSemi DP8381[56] at 0xd0006000 (0000:00:12.0), 00:0b:cd:8a:df:65, IRQ 10, port TP. [ 2.823520] ohci1394 0000:00:0c.0: enabling device (0010 -> 0012) [ 2.823563] ohci1394 0000:00:0c.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10 [ 2.843180] Initializing USB Mass Storage driver... [ 2.845324] scsi2 : SCSI emulation for USB Mass Storage devices [ 2.846271] usbcore: registered new interface driver usb-storage [ 2.846288] USB Mass Storage support registered. [ 2.846967] usb-storage: device found at 2 [ 2.846980] usb-storage: waiting for device to settle before scanning [ 2.882420] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d0005800-d0005fff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.595463] PM: Starting manual resume from disk [ 3.595485] PM: Resume from partition 8:5 [ 3.595490] PM: Checking hibernation image. [ 3.596127] PM: Resume from disk failed. [ 3.608972] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.608993] EXT4-fs (sda1): write access will be enabled during recovery [ 3.629753] EXT4-fs (sda1): barriers enabled [ 4.152638] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000bcd71a08accdc] [ 7.845725] usb-storage: device scan complete [ 7.846597] scsi 2:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS [ 7.848261] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 7.853398] sd 2:0:0:0: [sdb] 15682559 512-byte logical blocks: (8.02 GB/7.47 GiB) [ 7.853981] sd 2:0:0:0: [sdb] Write Protect is off [ 7.853994] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08 [ 7.854003] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 7.857737] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 7.857759] sdb: sdb1 [ 7.883261] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 7.883282] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 14.605284] kjournald2 starting: pid 303, dev sda1:8, commit interval 5 seconds [ 14.605405] EXT4-fs (sda1): delayed allocation enabled [ 14.605421] EXT4-fs: file extents enabled [ 14.605975] EXT4-fs: mballoc enabled [ 14.606035] EXT4-fs (sda1): orphan cleanup on readonly fs [ 14.606077] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 336619 [ 14.606834] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 310416 [ 14.607402] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 17835 [ 15.007928] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 16971 [ 15.028241] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 16902 [ 15.028315] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8011 [ 15.028848] EXT4-fs (sda1): 6 orphan inodes deleted [ 15.028865] EXT4-fs (sda1): recovery complete [ 15.086499] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 16.027442] type=1505 audit(1258423783.608:2): operation="profile_load" pid=324 name=/usr/share/gdm/guest-session/Xsession [ 16.036726] type=1505 audit(1258423783.618:3): operation="profile_load" pid=325 name=/sbin/dhclient3 [ 16.038321] type=1505 audit(1258423783.618:4): operation="profile_load" pid=325 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 16.039185] type=1505 audit(1258423783.618:5): operation="profile_load" pid=325 name=/usr/lib/connman/scripts/dhclient-script [ 16.125334] type=1505 audit(1258423783.706:6): operation="profile_load" pid=326 name=/usr/bin/evince [ 16.152349] type=1505 audit(1258423783.734:7): operation="profile_load" pid=326 name=/usr/bin/evince-previewer [ 16.168469] type=1505 audit(1258423783.750:8): operation="profile_load" pid=326 name=/usr/bin/evince-thumbnailer [ 16.225551] type=1505 audit(1258423783.806:9): operation="profile_load" pid=328 name=/usr/bin/freshclam [ 16.247328] type=1505 audit(1258423783.826:10): operation="profile_load" pid=329 name=/usr/lib/cups/backend/cups-pdf [ 16.249371] type=1505 audit(1258423783.830:11): operation="profile_load" pid=329 name=/usr/sbin/cupsd [ 17.439837] Adding 1646620k swap on /dev/sda5. Priority:-1 extents:1 across:1646620k [ 17.460418] usbfs: unrecognised mount option "devgid=xxx" or missing value [ 17.460440] usbfs: mount parameter error. [ 18.011700] EXT4-fs (sda1): internal journal on sda1:8 [ 19.781953] udev: starting version 147 [ 22.769479] Linux agpgart interface v0.103 [ 23.333270] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.685515] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x2348b3, caps: 0x904713/0x10008 [ 23.724451] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 24.933294] cfg80211: Calling CRDA to update world regulatory domain [ 25.231243] agpgart-ati 0000:00:00.0: Ati IGP345M chipset [ 25.270709] agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xd4000000 [ 26.270763] cfg80211: World regulatory domain updated: [ 26.270785] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.270798] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.270810] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.270822] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.270834] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.270843] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.934631] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input6 [ 26.934882] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 27.195920] parport_pc 00:09: reported by Plug and Play ACPI [ 27.196161] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 27.258930] lp: driver loaded but no devices found [ 27.292746] lp0: using parport0 (interrupt-driven). [ 27.553977] ip_tables: (C) 2000-2006 Netfilter Core Team [ 27.707683] yenta_cardbus 0000:00:0a.0: CardBus bridge found [103c:0850] [ 27.707736] yenta_cardbus 0000:00:0a.0: O2: res at 0x94/0xD4: 00/ea [ 27.707745] yenta_cardbus 0000:00:0a.0: O2: enabling read prefetch/write burst [ 27.832618] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0038, PCI irq 11 [ 27.832636] yenta_cardbus 0000:00:0a.0: Socket status: 30000828 [ 27.930070] [drm] Initialized drm 1.1.0 20060810 [ 28.149769] b43legacy-phy0: Broadcom 4306 WLAN found [ 28.156483] ppdev: user-space parallel port driver [ 28.181275] b43legacy-phy0 debug: Found PHY: Analog 1, Type 2, Revision 1 [ 28.181326] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 [ 28.204180] b43legacy-phy0 debug: Radio initialized [ 28.468116] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 28.468267] pci 0000:02:00.0: reg 10 32bit mmio: [0xd0000000-0xd000ffff] [ 28.468292] pci 0000:02:00.0: reg 14 32bit mmio: [0xc0000000-0xc000ffff] [ 29.300359] [drm] radeon default to kernel modesetting DISABLED. [ 29.300580] pci 0000:01:05.0: power state changed by ACPI to D0 [ 29.301378] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10 [ 29.301396] pci 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI 10 (level, low) -> IRQ 10 [ 29.302554] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0 [ 30.026429] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 30.030683] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 30.033645] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 30.035188] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 30.037311] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 30.058098] Disabling lock debugging due to kernel taint [ 30.075914] ndiswrapper version 1.55 loaded (smp=yes, preempt=no) [ 30.100338] phy0: Selected rate control algorithm 'minstrel' [ 30.102653] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ] [ 31.089920] ndiswrapper: driver mrv8335 (Marvell,02/22/2005,3.1.1.7) loaded [ 31.090964] ndiswrapper 0000:02:00.0: enabling device (0000 -> 0002) [ 31.091012] ndiswrapper 0000:02:00.0: PCI INT A -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11 [ 31.091065] ndiswrapper 0000:02:00.0: setting latency timer to 64 [ 31.101057] ndiswrapper: using IRQ 11 [ 31.370841] wlan1: ethernet device 00:14:6c:c3:1e:1a using NDIS driver: mrv8335, version: 0x3000036, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 11AB:1FAA.5.conf [ 31.370905] wlan1: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 31.375592] usbcore: registered new interface driver ndiswrapper [ 31.481786] __ratelimit: 3 callbacks suppressed [ 31.481806] type=1505 audit(1258423799.062:13): operation="profile_replace" pid=816 name=/usr/share/gdm/guest-session/Xsession [ 31.518186] type=1505 audit(1258423799.098:14): operation="profile_replace" pid=824 name=/sbin/dhclient3 [ 31.519804] type=1505 audit(1258423799.098:15): operation="profile_replace" pid=824 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 31.523565] type=1505 audit(1258423799.102:16): operation="profile_replace" pid=824 name=/usr/lib/connman/scripts/dhclient-script [ 31.548222] type=1505 audit(1258423799.130:17): operation="profile_replace" pid=829 name=/usr/bin/evince [ 31.593850] type=1505 audit(1258423799.174:18): operation="profile_replace" pid=829 name=/usr/bin/evince-previewer [ 31.612004] type=1505 audit(1258423799.190:19): operation="profile_replace" pid=829 name=/usr/bin/evince-thumbnailer [ 31.643977] type=1505 audit(1258423799.222:20): operation="profile_replace" pid=831 name=/usr/bin/freshclam [ 31.837518] type=1505 audit(1258423799.418:21): operation="profile_replace" pid=832 name=/usr/lib/cups/backend/cups-pdf [ 31.839422] type=1505 audit(1258423799.418:22): operation="profile_replace" pid=832 name=/usr/sbin/cupsd [ 33.179836] ALI 5451 0000:00:06.0: enabling device (0005 -> 0007) [ 33.180819] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5 [ 33.180832] PCI: setting IRQ 5 as level-triggered [ 33.180852] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNK7] -> GSI 5 (level, low) -> IRQ 5 [ 33.749253] pnp 00:0a: disabled [ 33.752008] pnp 00:0a: activated [ 34.850094] irda_init() [ 34.850160] NET: Registered protocol family 23 [ 34.933993] ali-ircc, driver loaded (Benjamin Kong) [ 34.936970] IrDA: Registered device irda0 [ 34.936998] ali_ircc_open(), ali-ircc, Found dongle: HP HSDL-3600 [ 36.016077] AC'97 1 does not respond - RESET [ 36.032074] AC'97 1 access is not valid [0xffffffff], removing mixer. [ 36.032206] ali mixer 1 creating error. [ 39.604109] b43legacy ssb0:0: firmware: requesting b43legacy/ucode4.fw [ 39.826250] b43legacy ssb0:0: firmware: requesting b43legacy/pcm4.fw [ 39.874278] b43legacy ssb0:0: firmware: requesting b43legacy/b0g0initvals2.fw [ 40.113322] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27) [ 40.184698] b43legacy-phy0 debug: Chip initialized [ 40.185525] b43legacy-phy0 debug: 30-bit DMA initialized [ 40.186151] Registered led device: b43legacy-phy0::radio [ 40.186248] b43legacy-phy0 debug: Wireless interface started [ 40.186283] b43legacy-phy0 debug: Adding Interface type 2 [ 40.187315] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 42.003849] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 42.018708] eth0: DSPCFG accepted after 0 usec. [ 42.019302] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.299397] /dev/vmmon[1162]: Module vmmon: registered with major=10 minor=165 [ 44.299432] /dev/vmmon[1162]: Module vmmon: initialized [ 44.530318] /dev/vmci[1170]: VMCI: Driver initialized. [ 44.530640] /dev/vmci[1170]: Module vmci: registered with major=10 minor=54 [ 44.530652] /dev/vmci[1170]: Module vmci: initialized [ 45.715852] agpgart-ati 0000:00:00.0: AGP 2.0 bridge [ 45.715923] agpgart-ati 0000:00:00.0: putting AGP V2 device into 4x mode [ 45.716230] pci 0000:01:05.0: putting AGP V2 device into 4x mode [ 45.915737] [drm] Setting GART location based on new memory map [ 45.915772] [drm] Loading R100 Microcode [ 45.915868] [drm] writeback test succeeded in 1 usecs [ 47.098907] /dev/vmnet: open called by PID 1218 (vmnet-bridge) [ 47.098959] /dev/vmnet: hub 0 does not exist, allocating memory. [ 47.099047] /dev/vmnet: port on hub 0 successfully opened [ 47.099148] bridge-eth0: up [ 47.099170] bridge-eth0: attached [ 47.590522] /dev/vmnet: open called by PID 1225 (vmnet-dhcpd) [ 47.590575] /dev/vmnet: hub 1 does not exist, allocating memory. [ 47.590679] /dev/vmnet: port on hub 1 successfully opened [ 47.666735] /dev/vmnet: open called by PID 1227 (vmnet-netifup) [ 47.666813] /dev/vmnet: port on hub 1 successfully opened [ 49.266105] /dev/vmnet: open called by PID 1233 (vmnet-dhcpd) [ 49.266166] /dev/vmnet: hub 8 does not exist, allocating memory. [ 49.266258] /dev/vmnet: port on hub 8 successfully opened [ 49.483677] /dev/vmnet: open called by PID 1237 (vmnet-natd) [ 49.483767] /dev/vmnet: port on hub 8 successfully opened [ 49.555285] /dev/vmnet: open called by PID 1238 (vmnet-netifup) [ 49.555377] /dev/vmnet: port on hub 8 successfully opened [ 59.704135] vmnet1: no IPv6 routers present [ 59.832211] vmnet8: no IPv6 routers present [ 95.725998] glxinfo:1960 freeing invalid memtype d4102000-d4112000 [ 95.726036] glxinfo:1960 freeing invalid memtype d4112000-d4122000 [ 95.726062] glxinfo:1960 freeing invalid memtype d4122000-d4132000 [ 95.726090] glxinfo:1960 freeing invalid memtype d4132000-d4142000 [ 95.726115] glxinfo:1960 freeing invalid memtype d4142000-d4152000 [ 95.726144] glxinfo:1960 freeing invalid memtype d4152000-d4162000 [ 95.726169] glxinfo:1960 freeing invalid memtype d4162000-d4172000 [ 95.726198] glxinfo:1960 freeing invalid memtype d4172000-d4182000 [ 95.726226] glxinfo:1960 freeing invalid memtype d4182000-d4192000 [ 95.726251] glxinfo:1960 freeing invalid memtype d4192000-d41a2000 [ 95.726277] glxinfo:1960 freeing invalid memtype d41a2000-d41b2000 [ 95.726305] glxinfo:1960 freeing invalid memtype d41b2000-d41c2000 [ 95.726330] glxinfo:1960 freeing invalid memtype d41c2000-d41d2000 [ 95.726356] glxinfo:1960 freeing invalid memtype d41d2000-d41e2000 [ 95.726384] glxinfo:1960 freeing invalid memtype d41e2000-d41f2000 [ 95.726410] glxinfo:1960 freeing invalid memtype d41f2000-d4202000 [ 95.726438] glxinfo:1960 freeing invalid memtype d4202000-d4212000 [ 95.726463] glxinfo:1960 freeing invalid memtype d4212000-d4222000 [ 95.726491] glxinfo:1960 freeing invalid memtype d4222000-d4232000 [ 95.726578] glxinfo:1960 freeing invalid memtype d4232000-d4242000 [ 95.726606] glxinfo:1960 freeing invalid memtype d4242000-d4252000 [ 95.726631] glxinfo:1960 freeing invalid memtype d4252000-d4262000 [ 95.726657] glxinfo:1960 freeing invalid memtype d4262000-d4272000 [ 95.726685] glxinfo:1960 freeing invalid memtype d4272000-d4282000 [ 95.726710] glxinfo:1960 freeing invalid memtype d4282000-d4292000 [ 95.726735] glxinfo:1960 freeing invalid memtype d4292000-d42a2000 [ 95.726763] glxinfo:1960 freeing invalid memtype d42a2000-d42b2000 [ 95.726789] glxinfo:1960 freeing invalid memtype d42b2000-d42c2000 [ 95.726814] glxinfo:1960 freeing invalid memtype d42c2000-d42d2000 [ 95.726842] glxinfo:1960 freeing invalid memtype d42d2000-d42e2000 [ 95.726867] glxinfo:1960 freeing invalid memtype d42e2000-d42f2000 [ 95.726892] glxinfo:1960 freeing invalid memtype d42f2000-d4302000 [ 117.030497] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 117.228195] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 117.428207] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 117.634340] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 123.527758] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 123.724127] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 123.924247] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 124.124288] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 130.020324] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 130.220151] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 130.420287] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 130.620219] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 136.488498] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 136.688355] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 136.899196] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 137.096272] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 139.262600] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 139.460339] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 139.668635] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 139.885267] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 145.720272] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 145.920127] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 146.120127] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 146.320113] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 152.165510] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 152.364200] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 152.564172] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 152.768433] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 158.652465] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 158.852469] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 159.052219] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 159.256180] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 161.426610] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 161.468490] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 165.168669] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 165.372196] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 165.573722] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 165.772159] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 166.611606] bridge-eth0: disabling the bridge [ 166.611654] bridge-eth0: down [ 166.611683] bridge-eth0: detached [ 166.611863] /dev/vmnet: open called by PID 1218 (vmnet-bridge) [ 166.611906] /dev/vmnet: hub 0 does not exist, allocating memory. [ 166.611990] /dev/vmnet: port on hub 0 successfully opened [ 166.612191] bridge-wlan1: is a Wireless Adapter [ 166.612212] bridge-wlan1: up [ 166.612233] bridge-wlan1: attached [ 171.496190] wlan1: no IPv6 routers present [ 171.674005] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 171.875151] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 172.072112] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 172.272107] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 178.144297] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 178.344275] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 178.544279] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 178.744468] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 184.604742] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 184.808653] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 185.008192] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 185.212233] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 191.084936] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 191.296268] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 191.496180] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 191.696110] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 197.581893] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 197.784200] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 197.984240] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 198.184234] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 204.045306] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 204.244142] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 204.444287] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 204.644200] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 210.546460] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 210.744268] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 210.955552] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 211.160205] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 217.000339] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 217.200320] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 217.404210] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 217.604265] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 223.492993] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 223.692274] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 223.892132] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 224.092290] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 232.444380] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 232.648217] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 232.848228] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 233.048248] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 238.910141] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 239.108266] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 239.308126] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 239.508132] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 245.325821] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 245.524109] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 245.724109] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 245.924139] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 251.756230] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 251.956206] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 252.156231] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 252.357442] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 258.163554] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 258.364358] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 258.564249] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 258.764223] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 264.594264] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 264.792151] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 264.993366] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 265.192144] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 271.020338] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 271.220510] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 271.420202] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 271.620163] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 277.454285] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 277.652128] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 277.852183] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 278.052120] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 283.884238] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 284.084120] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 284.286205] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 284.484167] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 292.382520] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 292.580238] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 292.780169] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 292.981248] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 298.792406] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 298.992180] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 299.192406] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 299.392144] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 305.216371] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 305.416137] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 305.616617] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 305.816140] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 311.649335] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 311.848123] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 312.048134] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 312.248117] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 318.065505] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 318.264118] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 318.464145] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 318.664122] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 324.500272] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 324.700143] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 324.900249] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 325.103890] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 330.941393] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 331.140269] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 331.346920] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 331.544243] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 337.407383] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 337.610526] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 337.808193] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 338.008206] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 343.896451] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 344.100231] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 344.304178] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 344.508209] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 348.909032] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 349.108139] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 349.308180] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 349.509638] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 355.362025] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 355.565036] wlan0: direct probe to AP 00:19:7e:45:43:01 try 2 [ 355.764665] wlan0: direct probe to AP 00:19:7e:45:43:01 try 3 [ 355.964989] wlan0: direct probe to AP 00:19:7e:45:43:01 timed out [ 361.808428] wlan0: direct probe to AP 00:19:7e:45:43:01 try 1 [ 361.813720] wlan0 direct probe responded [ 361.813742] wlan0: authenticate with AP 00:19:7e:45:43:01 [ 361.817275] wlan0: authenticated [ 361.817296] wlan0: associate with AP 00:19:7e:45:43:01 [ 361.829276] wlan0: RX AssocResp from 00:19:7e:45:43:01 (capab=0x411 status=0 aid=1) [ 361.829298] wlan0: associated [ 361.841841] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 372.188112] wlan0: no IPv6 routers present
-- [Hewlett-Packard Pavilion ze5300 (DC964A)] suspend/resume failure https://bugs.launchpad.net/bugs/351558 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
