Public bug reported:
This HAPPENS WITH ANY KARMIC KERNEL EVEN 2.6.31.1
ProblemType: Bug
Well this is really silly from a stable supposedly release that has been tested
for months. AND has been reported FIXED on Bug #296478 I'm here to tell you its
not fixed, does not work, period.
uname -r is 2.6.31-15-generic ____ KARMIC KOALA 9.10
I have tried this with default files as system is installed with minimal karmic
install I get error FATAL: Error inserting coretemp
(/lib/modules/2.6.31-15-generic/kernel/drivers/hwmon/coretemp.ko): Invalid
module format and I have tried it with the description below. FATAL ERRORS
EXIST.
dmesg outputs this [ 4563.803572] coretemp: no symbol version for module_layout
WTH??
I have this issue and further more on jaunty kernel 2.6.28-16 modprobe coretemp
worked perfectly after I replaced sensors-detect in /usr/sbin/ with this file
http://www.lm-sensors.org/svn/lm-sensors/trunk/prog/detect/sensors-detect chmod
755 this file and added a pre-patched coretemp.ko from
http://mabene.icomedias.com/coretemp.ko and place it in its path which varies
on kernel name but is in my instance
/lib/modules/2.6.31-15-generic/kernel/drivers/hwmon/ obviously I renamed the
existing files by doing e.g. filename.extension-orig. JUST FOR TESTING PURPOSES.
This is my sensors-detect output The modules load during that so it has to work
but in no obvious way.
http://pastebin.com/f2ae9c41b
LM-SENSORS is Version: 1:3.1.1-4~ppa0
sensors -s outputs No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
modprobe fails with errors as described.
doing /etc/init.d/lm-sensors start or service lm-sensors start outputs *
Setting sensors limits [fail] should say ok
when I do # modprobe coretemp or # modprobe -v coretemp I get the same silly
error FATAL: Error inserting coretemp
(/lib/modules/2.6.31-15-generic/kernel/drivers/hwmon/coretemp.ko): Invalid
module format.
This worked fine in Jaunty kernels with no issues in EITHER CASE and all my CPU
temps were posted when doing # sensors
Doing sensors-detect is able to see/load modules which are coretemp,
ic2-nforce2, ic2-dev I cannot load any of them using modprobe ic2-nforce2,
ic2-dev it says FATAL: Module ic2_dev not found.
makes anyone wonder if bug reports are addressed or even read in some cases.
silly bugs are allowed to travel down for years without being fixed in some
cases.
ok I get it its all free and ppl do it in their spare time they have
families/jobs/live like most of us do well I do anywho... just dont get it why
this is reported and not fixed. or when ppl just add it as a duplicate of e.g.
Bug #296478 and so sometimes even having dozens of 'duplicate' bugs that when u
read have nothing in relation in the majority of cases. As a obvious result it
gets ignored. So much for support.
The only kernel which fixes this is the 2.6.32rc7 which I have downloaded from
mainline for testing. though the system is only accessible via ssh and stays at
blinking cursor on machine.
** Affects: ubuntu
Importance: Undecided
Status: New
** Tags: 2.6.31.14 coretemp.ko fatal karmic
--
linux-image
https://bugs.launchpad.net/bugs/485234
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
