I have the same problem. I've installed Ubuntu 9.10 on a Laptop (Asus K70IO) I have set the power settings to "When the laptop lid is closed": Suspend Everytime when I close the lid, the laptop is goes in standby, but when I start the laptop again, the screen stays blank and the only i can do is to hold the power button for 5 seconds so the laptop gets a hard power off. I've attachted a part of the /var/log/kern.log
It says that the wakeup process is completed: Nov 24 00:44:12 RUUD-LAPTOP2 kernel: [15922.210131] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 24 00:44:12 RUUD-LAPTOP2 kernel: [15922.263914] ata1.00: configured for UDMA/133 Nov 24 00:44:12 RUUD-LAPTOP2 kernel: [15922.263928] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 Nov 24 00:44:12 RUUD-LAPTOP2 kernel: [15922.263931] ata1: irq_stat 0x00400040, connection status changed Nov 24 00:44:12 RUUD-LAPTOP2 kernel: [15922.267943] ata1.00: configured for UDMA/133 Nov 24 00:44:12 RUUD-LAPTOP2 kernel: [15922.267947] ata1: EH complete Nov 24 00:44:12 RUUD-LAPTOP2 kernel: [15922.284137] PM: resume devices took 0.920 seconds So it seems to be the process after wakeup. Than it produces the following messages at it hangs: Nov 24 00:44:12 RUUD-LAPTOP2 kernel: [15922.301372] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 24 00:44:12 RUUD-LAPTOP2 kernel: [15922.343993] ata2.00: configured for UDMA/100 Nov 24 00:44:12 RUUD-LAPTOP2 kernel: [15922.344888] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 Nov 24 00:44:12 RUUD-LAPTOP2 kernel: [15922.345100] ata2: irq_stat 0x40000001 ~$ dmesg [ 1.700064] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.700081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.704785] usb 1-5: configuration #1 chosen from 1 choice [ 1.717517] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633C, AS00, max UDMA/100, ATAPI AN [ 1.717532] ata2.00: applying bridge limits [ 1.734063] ata2.00: configured for UDMA/100 [ 1.745275] ata1.00: ATA-8: ST9320325AS, 0002SDM1, max UDMA/133 [ 1.745280] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.747360] ata1.00: configured for UDMA/133 [ 1.747526] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0002 PQ: 0 ANSI: 5 [ 1.747651] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.747666] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.747709] sd 0:0:0:0: [sda] Write Protect is off [ 1.747711] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.747734] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.747853] sda: [ 1.749395] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C AS00 PQ: 0 ANSI: 5 [ 1.755272] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.755277] Uniform CD-ROM driver Revision: 3.20 [ 1.755397] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.755459] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.757029] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 1.794330] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.794347] Freeing unused kernel memory: 660k freed [ 1.794605] Write protecting the kernel read-only data: 7580k ** Attachment added: "hibernate-error" http://launchpadlibrarian.net/35995235/hibernate-error -- machine does not wake up after suspend https://bugs.launchpad.net/bugs/63967 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
