מה זה בכלל אומר?
2009/11/29 Shahar Or <[email protected]> > ** Description changed: > > For the first time ever my Atheros AR242x WLAN (in an Acer Aspire One) > does indeed work with ath5k. > > Hooray! > > The card is shown as: > > 03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg > Wireless PCI Express Adapter (rev 01) > - Subsystem: Foxconn International, Inc. Device e008 > - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > - Latency: 0, Cache Line Size: 128 bytes > - Interrupt: pin A routed to IRQ 18 > - Region 0: Memory at 55200000 (64-bit, non-prefetchable) [size=64K] > - Capabilities: [40] Power Management version 2 > - Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > - Status: D0 PME-Enable- DSel=0 DScale=0 PME- > - Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable- > - Address: 00000000 Data: 0000 > - Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00 > - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <512ns, L1 <64us > - ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- > - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > - RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > - MaxPayload 128 bytes, MaxReadReq 512 bytes > - DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- > TransPend- > - LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <512ns, L1 <64us > - ClockPM- Suprise- LLActRep- BwNot- > - LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- > Retrain- CommClk+ > - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > - Capabilities: [90] MSI-X: Enable- Mask- TabSize=1 > - Vector table: BAR=0 offset=00000000 > - PBA: BAR=0 offset=00000000 > - Capabilities: [100] Advanced Error Reporting <?> > - Capabilities: [140] Virtual Channel <?> > - Kernel driver in use: ath5k_pci > - Kernel modules: ath_pci, ath5k > + Subsystem: Foxconn International, Inc. Device e008 > + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > + Latency: 0, Cache Line Size: 128 bytes > + Interrupt: pin A routed to IRQ 18 > + Region 0: Memory at 55200000 (64-bit, non-prefetchable) [size=64K] > + Capabilities: [40] Power Management version 2 > + Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > + Status: D0 PME-Enable- DSel=0 DScale=0 PME- > + Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > + Address: 00000000 Data: 0000 > + Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00 > + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 > <64us > + ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- > + DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > + RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > + MaxPayload 128 bytes, MaxReadReq 512 bytes > + DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- > + LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <512ns, L1 <64us > + ClockPM- Suprise- LLActRep- BwNot- > + LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- > CommClk+ > + ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > + LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- > BWMgmt- ABWMgmt- > + Capabilities: [90] MSI-X: Enable- Mask- TabSize=1 > + Vector table: BAR=0 offset=00000000 > + PBA: BAR=0 offset=00000000 > + Capabilities: [100] Advanced Error Reporting <?> > + Capabilities: [140] Virtual Channel <?> > + Kernel driver in use: ath5k_pci > + Kernel modules: ath_pci, ath5k > > Everything works (even the kill switch on the computer) EXCEPT: The LEDs > don't work at all. The do work with madwifi, so I do know that it's an > LED and not just a black hole. > + > + There's a bounty on this bug: > + http://www.fossfactory.org/project/p187 > > -- > Atheros WLAN AR242x LED doesn't work > https://bugs.launchpad.net/bugs/275120 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “linux” package in Ubuntu: Confirmed > > Bug description: > For the first time ever my Atheros AR242x WLAN (in an Acer Aspire One) does > indeed work with ath5k. > > Hooray! > > The card is shown as: > > 03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg > Wireless PCI Express Adapter (rev 01) > Subsystem: Foxconn International, Inc. Device e008 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 128 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at 55200000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > Address: 00000000 Data: 0000 > Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 > <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <512ns, L1 <64us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- > CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- > BWMgmt- ABWMgmt- > Capabilities: [90] MSI-X: Enable- Mask- TabSize=1 > Vector table: BAR=0 offset=00000000 > PBA: BAR=0 offset=00000000 > Capabilities: [100] Advanced Error Reporting <?> > Capabilities: [140] Virtual Channel <?> > Kernel driver in use: ath5k_pci > Kernel modules: ath_pci, ath5k > > Everything works (even the kill switch on the computer) EXCEPT: The LEDs > don't work at all. The do work with madwifi, so I do know that it's an LED > and not just a black hole. > > There's a bounty on this bug: > http://www.fossfactory.org/project/p187 > -- Atheros WLAN AR242x LED doesn't work https://bugs.launchpad.net/bugs/275120 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
