Public bug reported: Linux gdl 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux
Ubuntu 2.6.31-14.48-generic [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (bui...@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-protect [ 0.000000] F0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 0E8000000 mask FFC000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 base 0E8000000 mask FFC000000 write-combining [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] modified: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] modified: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 10000-15000 [ 0.000000] RAMDISK: 178e9000 - 18033125 [ 0.000000] ACPI: RSDP 000f6670 00014 (v00 BIOSTA) [ 0.000000] ACPI: RSDT 1fff3000 0002C (v01 BIOSTA AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 1fff3040 00074 (v01 BIOSTA AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 1fff30c0 03DE1 (v01 BIOSTA AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 1fff0000 00040 [ 0.000000] ACPI: APIC 1fff6ec0 00054 (v01 BIOSTA AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] node 0 low ram: 00000000 - 1fff0000 [ 0.000000] node 0 bootmap 00011000 - 00015000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [00178e9000 - 0018033125] RAMDISK ==> [00178e9000 - 0018033125] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac08a] BRK ==> [00008a9000 - 00008ac08a] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000] [ 0.000000] found SMP MP-table at [c00f4c10] f4c10 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fff0 [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001fff0 [ 0.000000] On node 0 totalpages: 130943 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1402000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129919 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=225aff98-5425-48fc-89b2-f1d92634a6e0 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2620800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 501104k/524224k available (4565k kernel code, 22468k reserved, 2143k data, 540k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1533.172 MHz processor. [ 0.001165] Console: colour VGA+ 80x25 [ 0.001171] console [tty0] enabled [ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3066.34 BogoMIPS (lpj=6132688) [ 0.004048] Security Framework initialized [ 0.004087] AppArmor: AppArmor initialized [ 0.004100] Mount-cache hash table entries: 512 [ 0.004297] Initializing cgroup subsys ns [ 0.004304] Initializing cgroup subsys cpuacct [ 0.004310] Initializing cgroup subsys memory [ 0.004323] Initializing cgroup subsys freezer [ 0.004327] Initializing cgroup subsys net_cls [ 0.004345] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004350] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004356] mce: CPU supports 4 MCE banks [ 0.004380] Performance Counters: AMD PMU driver. [ 0.004397] ... version: 0 [ 0.004400] ... bit width: 48 [ 0.004402] ... generic counters: 4 [ 0.004405] ... value mask: 0000ffffffffffff [ 0.004409] ... max period: 00007fffffffffff [ 0.004412] ... fixed-purpose counters: 0 [ 0.004415] ... counter mask: 000000000000000f [ 0.004421] Checking 'hlt' instruction... OK. [ 0.020665] SMP alternatives: switching to UP code [ 0.028033] Freeing SMP alternatives: 19k freed [ 0.028077] ACPI: Core revision 20090521 [ 0.041285] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.083123] CPU0: AMD Athlon(tm) XP 1800+ stepping 02 [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (3066.34 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] Booting paravirtualized kernel on bare hardware [ 0.084001] regulator: core version 0.5 [ 0.084001] Time: 20:20:28 Date: 12/02/09 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] EISA bus registered [ 0.084001] ACPI: bus type pci registered [ 0.161238] PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=1 [ 0.161242] PCI: Using configuration type 1 for base access [ 0.162722] bio: create slab <bio-0> at 0 [ 0.163443] ACPI: EC: Look up EC in DSDT [ 0.169747] ACPI: Interpreter enabled [ 0.169756] ACPI: (supports S0 S1 S4 S5) [ 0.169787] ACPI: Using IOAPIC for interrupt routing [ 0.175240] ACPI: No dock devices found. [ 0.175384] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.175454] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff] [ 0.175554] pci 0000:00:01.0: supports D1 [ 0.175614] pci 0000:00:0a.0: reg 20 io port: [0xd000-0xd01f] [ 0.175641] pci 0000:00:0a.0: supports D1 D2 [ 0.175645] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot [ 0.175651] pci 0000:00:0a.0: PME# disabled [ 0.175702] pci 0000:00:0a.1: reg 20 io port: [0xd400-0xd41f] [ 0.175729] pci 0000:00:0a.1: supports D1 D2 [ 0.175732] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot [ 0.175738] pci 0000:00:0a.1: PME# disabled [ 0.175773] pci 0000:00:0a.2: reg 10 32bit mmio: [0xef001000-0xef0010ff] [ 0.175815] pci 0000:00:0a.2: supports D1 D2 [ 0.175819] pci 0000:00:0a.2: PME# supported from D0 D1 D2 D3hot [ 0.175824] pci 0000:00:0a.2: PME# disabled [ 0.175864] pci 0000:00:0b.0: reg 10 io port: [0xd800-0xd87f] [ 0.175873] pci 0000:00:0b.0: reg 14 32bit mmio: [0xef000000-0xef00007f] [ 0.175897] pci 0000:00:0b.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.175916] pci 0000:00:0b.0: supports D1 D2 [ 0.175919] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot [ 0.175924] pci 0000:00:0b.0: PME# disabled [ 0.176073] pci 0000:00:11.1: reg 20 io port: [0xdc00-0xdc0f] [ 0.176139] pci 0000:00:11.5: reg 10 io port: [0xe800-0xe8ff] [ 0.176240] pci 0000:01:00.0: reg 10 32bit mmio: [0xec000000-0xecffffff] [ 0.176248] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.176268] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.176322] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff] [ 0.176328] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.176338] pci_bus 0000:00: on NUMA node 0 [ 0.176344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.193451] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.193646] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.193879] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.194118] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 0.194366] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *0 [ 0.194578] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.194824] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 [ 0.195029] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0 [ 0.195332] SCSI subsystem initialized [ 0.195468] libata version 3.00 loaded. [ 0.195600] usbcore: registered new interface driver usbfs [ 0.195626] usbcore: registered new interface driver hub [ 0.195671] usbcore: registered new device driver usb [ 0.195877] ACPI: WMI: Mapper loaded [ 0.195880] PCI: Using ACPI for IRQ routing [ 0.196094] Bluetooth: Core ver 2.15 [ 0.196152] NET: Registered protocol family 31 [ 0.196155] Bluetooth: HCI device and connection manager initialized [ 0.196160] Bluetooth: HCI socket layer initialized [ 0.196164] NetLabel: Initializing [ 0.196166] NetLabel: domain hash size = 128 [ 0.196169] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.196191] NetLabel: unlabeled traffic allowed by default [ 0.199389] pnp: PnP ACPI init [ 0.199426] ACPI: bus type pnp registered [ 0.204453] pnp: PnP ACPI: found 15 devices [ 0.204457] ACPI: ACPI bus type pnp unregistered [ 0.204463] PnPBIOS: Disabled by ACPI PNP [ 0.204482] system 00:00: iomem range 0xccc00-0xcffff has been reserved [ 0.204488] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.204493] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.204498] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.204502] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved [ 0.204508] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.204512] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.204517] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.204522] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.204527] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.204532] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.204543] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.204548] system 00:02: ioport range 0x294-0x297 has been reserved [ 0.239284] AppArmor: AppArmor Filesystem Enabled [ 0.239313] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.239317] pci 0000:00:01.0: IO window: disabled [ 0.239325] pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff [ 0.239331] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff [ 0.239349] pci 0000:00:01.0: setting latency timer to 64 [ 0.239357] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.239362] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.239366] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff] [ 0.239371] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] [ 0.239432] NET: Registered protocol family 2 [ 0.239574] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.240012] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.240257] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.240504] TCP: Hash tables configured (established 16384 bind 16384) [ 0.240509] TCP reno registered [ 0.240648] NET: Registered protocol family 1 [ 0.240768] Trying to unpack rootfs image as initramfs... [ 0.543746] Freeing initrd memory: 7464k freed [ 0.556855] cpufreq-nforce2: No nForce2 chipset. [ 0.556901] Scanning for low memory corruption every 60 seconds [ 0.557079] audit: initializing netlink socket (disabled) [ 0.557104] type=2000 audit(1259785228.555:1): initialized [ 0.569105] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.571372] VFS: Disk quotas dquot_6.5.2 [ 0.571464] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.572326] fuse init (API version 7.12) [ 0.572452] msgmni has been set to 993 [ 0.572794] alg: No test for stdrng (krng) [ 0.572816] io scheduler noop registered [ 0.572819] io scheduler anticipatory registered [ 0.572823] io scheduler deadline registered [ 0.572890] io scheduler cfq registered (default) [ 0.572909] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.572993] pci 0000:01:00.0: Boot video device [ 0.573116] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.573154] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.573351] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.573358] ACPI: Power Button [PWRF] [ 0.573441] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.573446] ACPI: Power Button [PWRB] [ 0.573515] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.573523] ACPI: Sleep Button [SLPB] [ 0.573594] fan PNP0C0B:00: registered as cooling_device0 [ 0.573602] ACPI: Fan [FAN] (on) [ 0.573934] Marking TSC unstable due to TSC halts in idle [ 0.573970] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.573998] processor LNXCPU:00: registered as cooling_device1 [ 0.574004] ACPI: Processor [CPU0] (supports 2 throttling states) [ 0.575997] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.575997] ACPI: Thermal Zone [THRM] (58 C) [ 0.575997] isapnp: Scanning for PnP cards... [ 0.577999] Switched to high resolution mode on CPU 0 [ 0.931136] isapnp: No Plug & Play device found [ 0.932873] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.933008] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.933108] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.933450] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.933588] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.935183] brd: module loaded [ 0.935882] loop: module loaded [ 0.936076] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.936872] pata_via 0000:00:11.1: version 0.3.4 [ 0.937352] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23 [ 0.937357] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23 [ 0.937367] alloc irq_desc for 23 on node -1 [ 0.937370] alloc kstat_irqs on node -1 [ 0.937382] pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 23 (level, low) -> IRQ 23 [ 0.937674] scsi0 : pata_via [ 0.937847] scsi1 : pata_via [ 0.942057] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14 [ 0.942064] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15 [ 0.942669] Fixed MDIO Bus: probed [ 0.942730] PPP generic driver version 2.4.2 [ 0.942916] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.942950] alloc irq_desc for 16 on node -1 [ 0.942954] alloc kstat_irqs on node -1 [ 0.942965] ehci_hcd 0000:00:0a.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 0.942993] ehci_hcd 0000:00:0a.2: EHCI Host Controller [ 0.943095] ehci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 0.943189] ehci_hcd 0000:00:0a.2: irq 16, io mem 0xef001000 [ 0.952020] ehci_hcd 0000:00:0a.2: USB 2.0 started, EHCI 1.00 [ 0.952141] usb usb1: configuration #1 chosen from 1 choice [ 0.952197] hub 1-0:1.0: USB hub found [ 0.952215] hub 1-0:1.0: 4 ports detected [ 0.952313] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.952342] uhci_hcd: USB Universal Host Controller Interface driver [ 0.952417] alloc irq_desc for 18 on node -1 [ 0.952421] alloc kstat_irqs on node -1 [ 0.952431] uhci_hcd 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.952444] uhci_hcd 0000:00:0a.0: UHCI Host Controller [ 0.952499] uhci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2 [ 0.952552] uhci_hcd 0000:00:0a.0: irq 18, io base 0x0000d000 [ 0.952707] usb usb2: configuration #1 chosen from 1 choice [ 0.952747] hub 2-0:1.0: USB hub found [ 0.952762] hub 2-0:1.0: 2 ports detected [ 0.952825] alloc irq_desc for 19 on node -1 [ 0.952829] alloc kstat_irqs on node -1 [ 0.952844] uhci_hcd 0000:00:0a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.952853] uhci_hcd 0000:00:0a.1: UHCI Host Controller [ 0.952908] uhci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 3 [ 0.952956] uhci_hcd 0000:00:0a.1: irq 19, io base 0x0000d400 [ 0.953094] usb usb3: configuration #1 chosen from 1 choice [ 0.953134] hub 3-0:1.0: USB hub found [ 0.953147] hub 3-0:1.0: 2 ports detected [ 0.953292] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.953736] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.953747] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.953847] mice: PS/2 mouse device common for all mice [ 0.954012] rtc_cmos 00:04: RTC can wake from S4 [ 0.954078] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.954128] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.954272] device-mapper: uevent: version 1.0.3 [ 0.954446] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] [ 0.954582] device-mapper: multipath: version 1.1.0 loaded [ 0.954587] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.954780] EISA: Probing bus 0 at eisa.0 [ 0.954803] Cannot allocate resource for EISA slot 4 [ 0.954822] EISA: Detected 0 cards. [ 0.954961] cpuidle: using governor ladder [ 0.955030] cpuidle: using governor menu [ 0.955780] TCP cubic registered [ 0.956044] NET: Registered protocol family 10 [ 0.956704] lo: Disabled Privacy Extensions [ 0.957203] NET: Registered protocol family 17 [ 0.957237] Bluetooth: L2CAP ver 2.13 [ 0.957240] Bluetooth: L2CAP socket layer initialized [ 0.957245] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.957248] Bluetooth: SCO socket layer initialized [ 0.957324] Bluetooth: RFCOMM TTY layer initialized [ 0.957330] Bluetooth: RFCOMM socket layer initialized [ 0.957333] Bluetooth: RFCOMM ver 1.11 [ 0.957357] powernow-k8: Processor cpuid 662 not supported [ 0.957394] Using IPI No-Shortcut mode [ 0.957508] PM: Resume from disk failed. [ 0.957531] registered taskstats version 1 [ 0.957667] Magic number: 5:579:345 [ 0.957709] tty tty62: hash matches [ 0.957819] rtc_cmos 00:04: setting system clock to 2009-12-02 20:20:29 UTC (1259785229) [ 0.957824] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.957827] EDD information not available. [ 0.981721] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.104593] ata1.00: ATA-6: Maxtor 4D040H2, DAK019K0, max UDMA/133 [ 1.104598] ata1.00: 80043264 sectors, multi 16: LBA48 [ 1.120435] ata1.00: configured for UDMA/133 [ 1.120636] scsi 0:0:0:0: Direct-Access ATA Maxtor 4D040H2 DAK0 PQ: 0 ANSI: 5 [ 1.120828] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.120900] sd 0:0:0:0: [sda] 80043264 512-byte logical blocks: (40.9 GB/38.1 GiB) [ 1.120981] sd 0:0:0:0: [sda] Write Protect is off [ 1.120986] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.121028] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.121255] sda: sda1 sda2 < sda5 > [ 1.185496] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.292389] ata2.00: ATAPI: LITEON DVD-ROM LTD163D, GHR3, max UDMA/33 [ 1.292431] ata2.01: ATAPI: HL-DT-ST GCE-8480B, 1.03, max UDMA/33 [ 1.300277] ata2.00: configured for UDMA/33 [ 1.316272] ata2.01: configured for UDMA/33 [ 1.316964] scsi 1:0:0:0: CD-ROM LITEON DVD-ROM LTD163D GHR3 PQ: 0 ANSI: 5 [ 1.318701] sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray [ 1.318706] Uniform CD-ROM driver Revision: 3.20 [ 1.318849] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.318941] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.319243] scsi 1:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8480B 1.03 PQ: 0 ANSI: 5 [ 1.321818] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.321935] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.321999] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 1.322038] Freeing unused kernel memory: 540k freed [ 1.323001] Write protecting the kernel text: 4568k [ 1.323049] Write protecting the kernel read-only data: 1836k [ 1.575374] 3c59x 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.575397] 3c59x: Donald Becker and others. [ 1.575408] 0000:00:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at e0840000. [ 1.667707] Linux agpgart interface v0.103 [ 1.674583] Floppy drive(s): fd0 is 1.44M [ 1.693641] FDC 0 is a post-1991 82077 [ 1.805675] agpgart: Detected VIA KT266/KY266x/KT333 chipset [ 1.810474] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe8000000 [ 2.925136] PM: Starting manual resume from disk [ 2.925145] PM: Resume from partition 8:5 [ 2.925148] PM: Checking hibernation image. [ 2.926261] PM: Resume from disk failed. [ 2.944102] EXT4-fs (sda1): barriers enabled [ 2.970866] kjournald2 starting: pid 322, dev sda1:8, commit interval 5 seconds [ 2.970893] EXT4-fs (sda1): delayed allocation enabled [ 2.970898] EXT4-fs: file extents enabled [ 2.978167] EXT4-fs: mballoc enabled [ 2.978199] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.840668] type=1505 audit(1259785232.382:2): operation="profile_load" pid=345 name=/usr/share/gdm/guest-session/Xsession [ 3.844523] type=1505 audit(1259785232.386:3): operation="profile_load" pid=346 name=/sbin/dhclient3 [ 3.844963] type=1505 audit(1259785232.386:4): operation="profile_load" pid=346 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.845210] type=1505 audit(1259785232.386:5): operation="profile_load" pid=346 name=/usr/lib/connman/scripts/dhclient-script [ 3.916416] type=1505 audit(1259785232.458:6): operation="profile_load" pid=347 name=/usr/bin/evince [ 3.924211] type=1505 audit(1259785232.466:7): operation="profile_load" pid=347 name=/usr/bin/evince-previewer [ 3.928990] type=1505 audit(1259785232.470:8): operation="profile_load" pid=347 name=/usr/bin/evince-thumbnailer [ 3.946541] type=1505 audit(1259785232.486:9): operation="profile_load" pid=349 name=/usr/lib/cups/backend/cups-pdf [ 3.947103] type=1505 audit(1259785232.486:10): operation="profile_load" pid=349 name=/usr/sbin/cupsd [ 5.279503] Adding 1494004k swap on /dev/sda5. Priority:-1 extents:1 across:1494004k [ 5.753657] EXT4-fs (sda1): internal journal on sda1:8 [ 5.816391] udev: starting version 147 [ 7.003216] lp: driver loaded but no devices found [ 7.179567] parport_pc 00:0a: reported by Plug and Play ACPI [ 7.179623] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 7.247306] ppdev: user-space parallel port driver [ 7.276332] lp0: using parport0 (interrupt-driven). [ 7.327031] gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 852kHz [ 7.803843] psmouse serio1: ID: 10 00 64 [ 7.813112] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.955412] irda_init() [ 7.955444] NET: Registered protocol family 23 [ 8.317378] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 8.741437] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.565647] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 9.565654] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 9.565662] alloc irq_desc for 22 on node -1 [ 9.565666] alloc kstat_irqs on node -1 [ 9.565678] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 9.565845] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 10.150818] __ratelimit: 3 callbacks suppressed [ 10.150825] type=1505 audit(1259785238.690:12): operation="profile_replace" pid=717 name=/usr/share/gdm/guest-session/Xsession [ 10.154025] type=1505 audit(1259785238.694:13): operation="profile_replace" pid=718 name=/sbin/dhclient3 [ 10.154475] type=1505 audit(1259785238.694:14): operation="profile_replace" pid=718 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 10.154730] type=1505 audit(1259785238.694:15): operation="profile_replace" pid=718 name=/usr/lib/connman/scripts/dhclient-script [ 10.165282] type=1505 audit(1259785238.706:16): operation="profile_replace" pid=719 name=/usr/bin/evince [ 10.173474] type=1505 audit(1259785238.714:17): operation="profile_replace" pid=719 name=/usr/bin/evince-previewer [ 10.178536] type=1505 audit(1259785238.718:18): operation="profile_replace" pid=719 name=/usr/bin/evince-thumbnailer [ 10.187842] type=1505 audit(1259785238.726:19): operation="profile_replace" pid=721 name=/usr/lib/cups/backend/cups-pdf [ 10.188464] type=1505 audit(1259785238.730:20): operation="profile_replace" pid=721 name=/usr/sbin/cupsd [ 10.192315] type=1505 audit(1259785238.734:21): operation="profile_replace" pid=722 name=/usr/sbin/tcpdump [ 19.174768] eth0: setting half-duplex. [ 19.174875] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6332.172608] eth0: setting full-duplex. [ 6332.172707] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] [1106:3099] Subsystem: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] [1106:3099] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: agpgart-via Kernel modules: via-agp 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] [1106:b099] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: ec000000-edffffff Prefetchable memory behind bridge: e0000000-e7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: shpchp 00:0a.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 4: I/O ports at d000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00:0a.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00:0a.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) (prog-if 20) Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 16 Region 0: Memory at ef001000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:0b.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX [Cyclone] [10b7:9055] (rev 30) Subsystem: 3Com Corporation 3c905B 100BaseTX [Cyclone] [10b7:9055] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at d800 [size=128] Region 1: Memory at ef000000 (32-bit, non-prefetchable) [size=128] [virtual] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: 3c59x Kernel modules: 3c59x 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8233A ISA Bridge [1106:3147] Subsystem: VIA Technologies, Inc. VT8233A ISA Bridge [1106:3147] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: i2c-viapro, via-ircc 00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 23 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at dc00 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_via 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 40) Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:4710] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 22 Region 0: I/O ports at e800 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: VIA 82xx Audio Kernel modules: snd-via82xx 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV11 [GeForce2 MX/MX 400] [10de:0110] (rev b2) Subsystem: ABIT Computer Corp. Device [147b:6109] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M] [virtual] Expansion ROM at ed000000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Kernel modules: nvidiafb, rivafb [ 6342.816029] eth0: no IPv6 routers present ProblemType: KernelOops Annotation: Your system might become unstable now and might need to be restarted. Architecture: i386 ArecordDevices: **** List of CAPTURE Hardware Devices **** card 0: V8233A [VIA 8233A], device 0: VIA 8233A [VIA 8233A] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: gdl 1429 F.... pulseaudio CRDA: Error: [Errno 2] Nessun file o directory Card0.Amixer.info: Card hw:0 'V8233A'/'VIA 8233A with ALC200,200P at 0xe800, irq 22' Mixer name : 'Realtek ALC200,200P rev 0' Components : 'AC97a:414c4710' Controls : 39 Simple ctrls : 25 Card1.Amixer.info: Card hw:1 'UART'/'MPU-401 UART at 0x330, irq 10' Mixer name : '' Components : '' Controls : 0 Simple ctrls : 0 Card1.Amixer.values: CurrentDmesg: [ 19.174768] eth0: setting half-duplex. [ 19.174875] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6332.172608] eth0: setting full-duplex. [ 6332.172707] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6342.816029] eth0: no IPv6 routers present Date: Wed Dec 2 21:08:22 2009 DistroRelease: Ubuntu 9.10 Failure: oops HibernationDevice: RESUME=UUID=d6811aee-6a1c-4e4c-8aff-9803933efb9f InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5) IwConfig: lo no wireless extensions. eth0 no wireless extensions. Lsusb: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: VIA Technologies, Inc. KT333-8233 Package: linux-image-2.6.31-14-generic 2.6.31-14.48 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=225aff98-5425-48fc-89b2-f1d92634a6e0 ro quiet splash ProcVersionSignature: Ubuntu 2.6.31-14.48-generic RelatedPackageVersions: linux-backports-modules-2.6.31-14-generic N/A linux-firmware 1.24 RfKill: SourcePackage: linux Tags: kernel-oops Title: BUG: unable to handle kernel NULL pointer dereference at (null) Uname: Linux 2.6.31-14-generic i686 dmi.bios.date: 03/26/2002 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: 6.00 PG dmi.board.name: KT333-8233 dmi.chassis.type: 3 dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd03/26/2002:svnVIATechnologies,Inc.:pnKT333-8233:pvr:rvn:rnKT333-8233:rvr:cvn:ct3:cvr: dmi.product.name: KT333-8233 dmi.sys.vendor: VIA Technologies, Inc. ** Affects: ubuntu Importance: Undecided Status: New ** Tags: apport-kerneloops i386 kernel-oops -- BUG: unable to handle kernel NULL pointer dereference at (null) https://bugs.launchpad.net/bugs/491620 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
