*** This bug is a duplicate of bug 432636 ***
https://bugs.launchpad.net/bugs/432636
Thanks Geoffrey,
Marked my bug as duplicate of yours. Hopefully someone out there fixes
it.
Pat
On Sun, Dec 13, 2009 at 1:59 AM, Geoffrey Hausheer <[email protected]
> wrote:
> FYI, I had the exact same problem, and found the same situation
> (2.6.28-14 worked but not much else). I found a solution that let me
> use 2.6.31 though. Details are listed in Bug #432636.
>
> --
> HostAP kernel driver cannot load Prism2.5 card
> https://bugs.launchpad.net/bugs/487978
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in “linux” package in Ubuntu: New
>
> Bug description:
> It seems the HostAP wireless driver for my Intersil PCI card stops working
> since I applied the 2.6.28-15 and subsequently the 2.6.28-16 kernel packages
> from the update manager.
>
> I have since upgraded to 9.10 with 2.6.31.15 and get the same results.
>
> (It seems that the driver cannot assign a proper IRQ, or seems to try
> assigning them and as soon as it hits 15, it says disabled and quits
> trying).
>
> My temporary fix is telling the Grub bootloader to load the
> 2.6.28-14-generic kernel and my network card seems to be fine.
>
> Here is a dump of a bunch of diagnostics I was able to gather. Please let
> me know if you need more details to address this problem.
>
> -------------------------------------------------
>
>
> >From 2.6.28-16-generic kernel...
> ------------------------
> h...@home:/var/log$ uname -a
> Linux Home 2.6.28-16-generic #55-Ubuntu SMP Tue Oct 20 19:48:24 UTC 2009
> i686 GNU/Linux
> h...@home:/var/log$ ifconfig -a
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:324 errors:0 dropped:0 overruns:0 frame:0
> TX packets:324 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:26000 (26.0 KB) TX bytes:26000 (26.0 KB)
> ------------------------
> h...@home:/var/log$ lsmod
> Module Size Used by
> r128 47232 2
> drm 96424 3 r128
> ppdev 15620 0
> snd_sb16 21032 0
> snd_opl3_lib 18560 1 snd_sb16
> snd_sb16_dsp 18048 1 snd_sb16
> snd_sb16_csp 18816 1 snd_sb16
> snd_sb_common 23808 3 snd_sb16,snd_sb16_dsp,snd_sb16_csp
> snd_hwdep 15108 2 snd_opl3_lib,snd_sb16_csp
> snd_mpu401_uart 15104 1 snd_sb16
> sbp2 30476 0
> lp 17156 0
> parport 42220 2 ppdev,lp
> snd_intel8x0 37532 3
> snd_ac97_codec 112292 1 snd_intel8x0
> ac97_bus 9856 1 snd_ac97_codec
> snd_pcm_oss 46336 0
> snd_mixer_oss 22656 1 snd_pcm_oss
> snd_pcm 83076 5
> snd_sb16,snd_sb16_dsp,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
> snd_seq_dummy 10756 0
> snd_seq_oss 37760 0
> snd_seq_midi 14336 0
> snd_rawmidi 29696 2 snd_mpu401_uart,snd_seq_midi
> snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
> snd_seq 56880 6
> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> hostap_pci 57488 0
> snd_timer 29704 3 snd_opl3_lib,snd_pcm,snd_seq
> snd_seq_device 14988 6
> snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
> iTCO_wdt 19108 0
> iTCO_vendor_support 11652 1 iTCO_wdt
> hostap 113924 1 hostap_pci
> intel_agp 34108 1
> ieee80211_crypt 13444 1 hostap
> agpgart 42696 2 drm,intel_agp
> dcdbas 15264 0
> pcspkr 10496 0
> snd 62756 23
> snd_sb16,snd_opl3_lib,snd_sb16_dsp,snd_sb16_csp,snd_sb_common,snd_hwdep,snd_mpu401_uart,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> soundcore 15200 1 snd
> snd_page_alloc 16904 2 snd_intel8x0,snd_pcm
> serio_raw 13444 0
> shpchp 40212 0
> usblp 20224 0
> usbhid 42336 0
> ohci1394 38576 0
> ieee1394 94660 2 sbp2,ohci1394
> vesafb 13828 1
> fbcon 46112 72
> tileblit 10752 1 fbcon
> font 16384 1 fbcon
> bitblit 13824 1 fbcon
> softcursor 9984 1 bitblit
>
> -----------------------
>
> h...@home:/var/log$ lspci
> 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM
> Controller/Host-Hub Interface (rev 01)
> 00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE
> Host-to-AGP Bridge (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
> (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
> (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
> (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
> EHCI Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
> 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC
> Interface Bridge (rev 01)
> 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev
> 01)
> 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus
> Controller (rev 01)
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
> (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
> 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP
> 4x TMDS
> 02:09.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset
> (rev 01)
> 02:0a.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394
> Controller
>
> -------------
> h...@home:/var/log$ dmesg
>
> [ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.28-16-generic (bui...@vernadsky) (gcc
> version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #55-Ubuntu SMP Tue Oct 20 19:48:24
> UTC 2009 (Ubuntu 2.6.28-16.55-generic)
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] NSC Geode by NSC
> [ 0.000000] Cyrix CyrixInstead
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] Transmeta GenuineTMx86
> [ 0.000000] Transmeta TransmetaCPU
> [ 0.000000] UMC UMC UMC UMC
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000002ff71000 (usable)
> [ 0.000000] BIOS-e820: 000000002ff71000 - 000000002ff73000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000002ff73000 - 000000002ff94000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000002ff94000 - 0000000030000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> [ 0.000000] DMI 2.3 present.
> [ 0.000000] last_pfn = 0x2ff71 max_arch_pfn = 0x100000
> [ 0.000000] Scanning 2 areas for low memory corruption
> [ 0.000000] modified physical RAM map:
> [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
> [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
> [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
> [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
> [ 0.000000] modified: 0000000000010000 - 0000000000093000 (usable)
> [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] modified: 0000000000100000 - 000000002ff71000 (usable)
> [ 0.000000] modified: 000000002ff71000 - 000000002ff73000 (ACPI NVS)
> [ 0.000000] modified: 000000002ff73000 - 000000002ff94000 (ACPI data)
> [ 0.000000] modified: 000000002ff94000 - 0000000030000000 (reserved)
> [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
> [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
> [ 0.000000] kernel direct mapping tables up to 2ff71000 @ 10000-16000
> [ 0.000000] RAMDISK: 2f83a000 - 2ff6060b
> [ 0.000000] ACPI: RSDP 000FEBA0, 0014 (r0 DELL )
> [ 0.000000] ACPI: RSDT 000FD4FF, 0038 (r1 DELL GX260 8 ASL
> 61)
> [ 0.000000] ACPI: FACP 000FD537, 0074 (r1 DELL GX260 8 ASL
> 61)
> [ 0.000000] ACPI: DSDT FFFD669E, 2563 (r1 DELL dt_ex 1000 MSFT
> 100000D)
> [ 0.000000] ACPI: FACS 2FF71000, 0040
> [ 0.000000] ACPI: SSDT FFFD8D3E, 00BA (r1 DELL st_ex 1000 MSFT
> 100000D)
> [ 0.000000] ACPI: APIC 000FD5AB, 006C (r1 DELL GX260 8 ASL
> 61)
> [ 0.000000] ACPI: BOOT 000FD617, 0028 (r1 DELL GX260 8 ASL
> 61)
> [ 0.000000] ACPI: ASF! 000FD63F, 0067 (r16 DELL GX260 8 ASL
> 61)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] 0MB HIGHMEM available.
> [ 0.000000] 767MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 2ff71000
> [ 0.000000] low ram: 00000000 - 2ff71000
> [ 0.000000] bootmap 00012000 - 00017ff0
> [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002ff71000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
> [0000000000 - 0000001000]
> [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
> [0000001000 - 0000002000]
> [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
> [0000006000 - 0000007000]
> [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==>
> [0000100000 - 00008780ac]
> [ 0.000000] #4 [002f83a000 - 002ff6060b] RAMDISK ==>
> [002f83a000 - 002ff6060b]
> [ 0.000000] #5 [0000879000 - 000087d000] INIT_PG_TABLE ==>
> [0000879000 - 000087d000]
> [ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==>
> [000009fc00 - 0000100000]
> [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==>
> [0000010000 - 0000012000]
> [ 0.000000] #8 [0000012000 - 0000018000] BOOTMAP ==>
> [0000012000 - 0000018000]
> [ 0.000000] found SMP MP-table at [c00fe710] 000fe710
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] Normal 0x00001000 -> 0x0002ff71
> [ 0.000000] HighMem 0x0002ff71 -> 0x0002ff71
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[4] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x00000002
> [ 0.000000] 0: 0x00000006 -> 0x00000007
> [ 0.000000] 0: 0x00000010 -> 0x00000093
> [ 0.000000] 0: 0x00000100 -> 0x0002ff71
> [ 0.000000] On node 0 totalpages: 196343
> [ 0.000000] free_area_init_node: node 0, pgdat c06cb780, node_mem_map
> c1000000
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 3942 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1503 pages used for memmap
> [ 0.000000] Normal zone: 190866 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 0 pages used for memmap
> [ 0.000000] Movable zone: 0 pages used for memmap
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
> 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 0000000000002000 -
> 0000000000006000
> [ 0.000000] PM: Registered nosave memory: 0000000000007000 -
> 0000000000010000
> [ 0.000000] PM: Registered nosave memory: 0000000000093000 -
> 00000000000f0000
> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
> 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 40000000 (gap:
> 30000000:cec00000)
> [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
> [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 194808
> [ 0.000000] Kernel command line:
> root=UUID=3563dcde-0d7c-4c9a-9c64-591285a3a4be ro quiet splash vga=775
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
> [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
> [ 0.000000] Detected 2391.136 MHz processor.
> [ 0.004000] Console: colour dummy device 80x25
> [ 0.004000] console [tty0] enabled
> [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288
> bytes)
> [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [ 0.004000] allocated 3929300 bytes of page_cgroup
> [ 0.004000] please try cgroup_disable=memory option if you don't want
> [ 0.004000] Scanning for low memory corruption every 60 seconds
> [ 0.004000] Memory: 759164k/785860k available (4116k kernel code, 25996k
> reserved, 2199k data, 532k init, 0k highmem)
> [ 0.004000] virtual kernel memory layout:
> [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
> [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
> [ 0.004000] vmalloc : 0xf0771000 - 0xff3fe000 ( 236 MB)
> [ 0.004000] lowmem : 0xc0000000 - 0xeff71000 ( 767 MB)
> [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB)
> [ 0.004000] .data : 0xc050520d - 0xc072ae60 (2199 kB)
> [ 0.004000] .text : 0xc0100000 - 0xc050520d (4116 kB)
> [ 0.004000] Checking if this processor honours the WP bit even in
> supervisor mode...Ok.
> [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0,
> CPUs=4, Nodes=1
> [ 0.004012] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 4782.27 BogoMIPS (lpj=9564544)
> [ 0.004035] Security Framework initialized
> [ 0.004044] SELinux: Disabled at boot.
> [ 0.004068] AppArmor: AppArmor initialized
> [ 0.004084] Mount-cache hash table entries: 512
> [ 0.004280] Initializing cgroup subsys ns
> [ 0.004287] Initializing cgroup subsys cpuacct
> [ 0.004291] Initializing cgroup subsys memory
> [ 0.004297] Initializing cgroup subsys freezer
> [ 0.004318] CPU: Trace cache: 12K uops, L1 D cache: 8K
> [ 0.004323] CPU: L2 cache: 512K
> [ 0.004327] CPU: Hyper-Threading is disabled
> [ 0.004349] Checking 'hlt' instruction... OK.
> [ 0.020843] SMP alternatives: switching to UP code
> [ 0.152033] ACPI: Core revision 20080926
> [ 0.166254] ACPI: Checking initramfs for custom DSDT
> [ 0.535554] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.575248] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
> [ 0.576002] Brought up 1 CPUs
> [ 0.576002] Total of 1 processors activated (4782.27 BogoMIPS).
> [ 0.576002] CPU0 attaching NULL sched-domain.
> [ 0.576002] net_namespace: 776 bytes
> [ 0.576002] Booting paravirtualized kernel on bare hardware
> [ 0.576002] Time: 2:12:25 Date: 10/24/09
> [ 0.576002] regulator: core version 0.5
> [ 0.576002] NET: Registered protocol family 16
> [ 0.576002] EISA bus registered
> [ 0.576002] ACPI: bus type pci registered
> [ 0.600418] PCI: PCI BIOS revision 2.10 entry at 0xfbdf6, last bus=2
> [ 0.600422] PCI: Using configuration type 1 for base access
> [ 0.602077] ACPI: EC: Look up EC in DSDT
> [ 0.630990] ACPI: Interpreter enabled
> [ 0.630999] ACPI: (supports S0 S1 S3 S4 S5)
> [ 0.631026] ACPI: Using IOAPIC for interrupt routing
> [ 0.654609] ACPI: No dock devices found.
> [ 0.654622] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.654688] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
> [ 0.654826] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
> [ 0.654879] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
> [ 0.654932] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
> [ 0.654993] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa04800-0xffa04bff]
> [ 0.655038] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.655044] pci 0000:00:1d.7: PME# disabled
> [ 0.655092] * The chipset may have PM-Timer Bug. Due to workarounds for
> a bug,
> [ 0.655094] * this clock source is slow. If you are sure your timer does
> not have
> [ 0.655095] * this bug, please use "acpi_pm_good" to disable the
> workaround
> [ 0.655137] HPET not enabled in BIOS. You might try hpet=force boot
> option
> [ 0.655144] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4
> ACPI/GPIO/TCO
> [ 0.655149] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4
> GPIO
> [ 0.655170] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
> [ 0.655178] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
> [ 0.655185] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
> [ 0.655192] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
> [ 0.655199] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
> [ 0.655207] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
> [ 0.655258] pci 0000:00:1f.3: reg 20 io port: [0xdc80-0xdc9f]
> [ 0.655302] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
> [ 0.655309] pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f]
> [ 0.655316] pci 0000:00:1f.5: reg 18 32bit mmio: [0xffa04400-0xffa045ff]
> [ 0.655323] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xffa04000-0xffa040ff]
> [ 0.655347] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
> [ 0.655352] pci 0000:00:1f.5: PME# disabled
> [ 0.655396] pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
> [ 0.655403] pci 0000:01:00.0: reg 14 io port: [0xec00-0xecff]
> [ 0.655410] pci 0000:01:00.0: reg 18 32bit mmio: [0xff8fc000-0xff8fffff]
> [ 0.655429] pci 0000:01:00.0: reg 30 32bit mmio: [0x80000000-0x8001ffff]
> [ 0.655441] pci 0000:01:00.0: supports D1
> [ 0.655481] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
> [ 0.655485] pci 0000:00:01.0: bridge 32bit mmio: [0xff800000-0xff9fffff]
> [ 0.655490] pci 0000:00:01.0: bridge 32bit mmio pref:
> [0xf8000000-0xfbffffff]
> [ 0.655540] pci 0000:02:09.0: reg 10 32bit mmio: [0xfc0ff000-0xfc0fffff]
> [ 0.655578] pci 0000:02:09.0: supports D1 D2
> [ 0.655581] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot
> [ 0.655585] pci 0000:02:09.0: PME# disabled
> [ 0.655620] pci 0000:02:0a.0: reg 10 32bit mmio: [0xff6ff800-0xff6fffff]
> [ 0.655628] pci 0000:02:0a.0: reg 14 32bit mmio: [0xff6f8000-0xff6fbfff]
> [ 0.655664] pci 0000:02:0a.0: supports D2
> [ 0.655666] pci 0000:02:0a.0: PME# supported from D2 D3hot
> [ 0.655671] pci 0000:02:0a.0: PME# disabled
> [ 0.655703] pci 0000:00:1e.0: transparent bridge
> [ 0.655710] pci 0000:00:1e.0: bridge 32bit mmio: [0xff600000-0xff7fffff]
> [ 0.655716] pci 0000:00:1e.0: bridge 32bit mmio pref:
> [0xfc000000-0xfc0fffff]
> [ 0.655729] bus 00 -> node 0
> [ 0.655736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.656298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> [ 0.746645] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12
> 15)
> [ 0.746989] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12
> 15)
> [ 0.747335] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12
> 15)
> [ 0.747680] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12
> 15)
> [ 0.748130] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12
> 15) *0, disabled.
> [ 0.748478] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12
> 15) *0, disabled.
> [ 0.748821] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12
> 15) *0, disabled.
> [ 0.749166] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12
> 15)
> [ 0.749381] ACPI: WMI: Mapper loaded
> [ 0.749671] SCSI subsystem initialized
> [ 0.749727] libata version 3.00 loaded.
> [ 0.749795] usbcore: registered new interface driver usbfs
> [ 0.749819] usbcore: registered new interface driver hub
> [ 0.749855] usbcore: registered new device driver usb
> [ 0.750009] PCI: Using ACPI for IRQ routing
> [ 0.750122] Bluetooth: Core ver 2.13
> [ 0.750122] NET: Registered protocol family 31
> [ 0.750122] Bluetooth: HCI device and connection manager initialized
> [ 0.750122] Bluetooth: HCI socket layer initialized
> [ 0.750122] NET: Registered protocol family 8
> [ 0.750122] NET: Registered protocol family 20
> [ 0.750122] NetLabel: Initializing
> [ 0.750122] NetLabel: domain hash size = 128
> [ 0.750122] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.750122] NetLabel: unlabeled traffic allowed by default
> [ 0.750122] AppArmor: AppArmor Filesystem Enabled
> [ 0.750122] pnp: PnP ACPI init
> [ 0.750122] ACPI: bus type pnp registered
> [ 0.766269] pnp 00:07: io resource (0x800-0x85f) overlaps 0000:00:1f.0
> BAR 7 (0x800-0x87f), disabling
> [ 0.766275] pnp 00:07: io resource (0x860-0x8ff) overlaps 0000:00:1f.0
> BAR 7 (0x800-0x87f), disabling
> [ 0.767049] pnp: PnP ACPI: found 8 devices
> [ 0.767052] ACPI: ACPI bus type pnp unregistered
> [ 0.767059] PnPBIOS: Disabled by ACPI PNP
> [ 0.767072] system 00:00: iomem range 0x0-0x9ffff could not be reserved
> [ 0.767076] system 00:00: iomem range 0x100000-0xffffff could not be
> reserved
> [ 0.767080] system 00:00: iomem range 0x1000000-0x2ff70fff could not be
> reserved
> [ 0.767083] system 00:00: iomem range 0xc0000-0xfffff could not be
> reserved
> [ 0.767087] system 00:00: iomem range 0xfec00000-0xfec0ffff has been
> reserved
> [ 0.767090] system 00:00: iomem range 0xfee00000-0xfee0ffff has been
> reserved
> [ 0.767093] system 00:00: iomem range 0xffb00000-0xffbfffff has been
> reserved
> [ 0.767096] system 00:00: iomem range 0xffc00000-0xffffffff has been
> reserved
> [ 0.767107] system 00:07: ioport range 0xc00-0xc7f has been reserved
> [ 0.801903] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
> [ 0.801908] pci 0000:00:01.0: IO window: 0xe000-0xefff
> [ 0.801914] pci 0000:00:01.0: MEM window: 0xff800000-0xff9fffff
> [ 0.801919] pci 0000:00:01.0: PREFETCH window:
> 0x000000f8000000-0x000000fbffffff
> [ 0.801927] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
> [ 0.801929] pci 0000:00:1e.0: IO window: disabled
> [ 0.801935] pci 0000:00:1e.0: MEM window: 0xff600000-0xff7fffff
> [ 0.801940] pci 0000:00:1e.0: PREFETCH window:
> 0x000000fc000000-0x000000fc0fffff
> [ 0.801961] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.801967] bus: 00 index 0 io port: [0x00-0xffff]
> [ 0.801969] bus: 00 index 1 mmio: [0x000000-0xffffffff]
> [ 0.801972] bus: 01 index 0 io port: [0xe000-0xefff]
> [ 0.801975] bus: 01 index 1 mmio: [0xff800000-0xff9fffff]
> [ 0.801978] bus: 01 index 2 mmio: [0xf8000000-0xfbffffff]
> [ 0.801980] bus: 01 index 3 mmio: [0x0-0x0]
> [ 0.801982] bus: 02 index 0 mmio: [0x0-0x0]
> [ 0.801985] bus: 02 index 1 mmio: [0xff600000-0xff7fffff]
> [ 0.801988] bus: 02 index 2 mmio: [0xfc000000-0xfc0fffff]
> [ 0.801990] bus: 02 index 3 io port: [0x00-0xffff]
> [ 0.801993] bus: 02 index 4 mmio: [0x000000-0xffffffff]
> [ 0.802004] NET: Registered protocol family 2
> [ 0.802175] IP route cache hash table entries: 32768 (order: 5, 131072
> bytes)
> [ 0.802636] TCP established hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [ 0.803997] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.804963] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.804971] TCP reno registered
> [ 0.805257] NET: Registered protocol family 1
> [ 0.805467] checking if image is initramfs... it is
> [ 1.304047] Switched to high resolution mode on CPU 0
> [ 1.535248] Freeing initrd memory: 7321k freed
> [ 1.535317] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
> [ 1.535320] Simple Boot Flag at 0x7a set to 0x1
> [ 1.535361] cpufreq: No nForce2 chipset.
> [ 1.535586] audit: initializing netlink socket (disabled)
> [ 1.535616] type=2000 audit(1256350346.532:1): initialized
> [ 1.543384] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [ 1.544886] VFS: Disk quotas dquot_6.5.1
> [ 1.544963] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 1.545794] fuse init (API version 7.10)
> [ 1.545894] msgmni has been set to 1497
> [ 1.546135] alg: No test for stdrng (krng)
> [ 1.546152] io scheduler noop registered
> [ 1.546155] io scheduler anticipatory registered
> [ 1.546157] io scheduler deadline registered
> [ 1.546182] io scheduler cfq registered (default)
> [ 1.546280] pci 0000:01:00.0: Boot video device
> [ 1.565220] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 1.565233] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 1.565392] input: Power Button (FF) as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 1.565396] ACPI: Power Button (FF) [PWRF]
> [ 1.565450] input: Power Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> [ 1.565459] ACPI: Power Button (CM) [VBTN]
> [ 1.565693] processor ACPI_CPU:00: registered as cooling_device0
> [ 1.584110] isapnp: Scanning for PnP cards...
> [ 1.937915] isapnp: No Plug & Play device found
> [ 1.939580] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
> [ 1.939684] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.940092] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.941059] brd: module loaded
> [ 1.941495] loop: module loaded
> [ 1.941603] Fixed MDIO Bus: probed
> [ 1.941611] PPP generic driver version 2.4.2
> [ 1.941695] input: Macintosh mouse button emulation as
> /devices/virtual/input/input2
> [ 1.941741] Driver 'sd' needs updating - please use bus_type methods
> [ 1.941754] Driver 'sr' needs updating - please use bus_type methods
> [ 1.941848] ata_piix 0000:00:1f.1: version 2.12
> [ 1.941861] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
> [ 1.941879] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) ->
> IRQ 18
> [ 1.941957] ata_piix 0000:00:1f.1: setting latency timer to 64
> [ 1.942115] scsi0 : ata_piix
> [ 1.942257] scsi1 : ata_piix
> [ 1.942311] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq
> 14
> [ 1.942315] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq
> 15
> [ 2.104492] ata1.00: ATA-4: QUANTUM FIREBALL CR13.0A, A5U.1200, max
> UDMA/66
> [ 2.104495] ata1.00: 25429824 sectors, multi 8: LBA
> [ 2.120443] ata1.00: configured for UDMA/66
> [ 2.284698] ata2.00: ATAPI: GCR-8481B, 1.06, max UDMA/33
> [ 2.300699] ata2.00: configured for UDMA/33
> [ 2.302335] scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL
> A5U. PQ: 0 ANSI: 5
> [ 2.302465] sd 0:0:0:0: [sda] 25429824 512-byte hardware sectors: (13.0
> GB/12.1 GiB)
> [ 2.302487] sd 0:0:0:0: [sda] Write Protect is off
> [ 2.302490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 2.302523] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 2.302610] sd 0:0:0:0: [sda] 25429824 512-byte hardware sectors: (13.0
> GB/12.1 GiB)
> [ 2.302629] sd 0:0:0:0: [sda] Write Protect is off
> [ 2.302632] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 2.302664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 2.302669] sda: sda1 sda2 < sda5 >
> [ 2.336918] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 2.337000] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 2.339683] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8481B
> 1.06 PQ: 0 ANSI: 5
> [ 2.345124] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
> [ 2.345128] Uniform CD-ROM driver Revision: 3.20
> [ 2.345263] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 2.345330] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 2.346054] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.346089] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) ->
> IRQ 23
> [ 2.346121] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 2.346126] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 2.346213] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
> number 1
> [ 2.350139] ehci_hcd 0000:00:1d.7: debug port 1
> [ 2.350146] ehci_hcd 0000:00:1d.7: cache line size of 128 is not
> supported
> [ 2.350166] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa04800
> [ 2.364011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 2.364113] usb usb1: configuration #1 chosen from 1 choice
> [ 2.364150] hub 1-0:1.0: USB hub found
> [ 2.364164] hub 1-0:1.0: 6 ports detected
> [ 2.364309] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 2.364335] uhci_hcd: USB Universal Host Controller Interface driver
> [ 2.364390] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 2.364400] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 2.364404] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 2.364461] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
> number 2
> [ 2.364492] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
> [ 2.364591] usb usb2: configuration #1 chosen from 1 choice
> [ 2.364625] hub 2-0:1.0: USB hub found
> [ 2.364635] hub 2-0:1.0: 2 ports detected
> [ 2.364742] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
> IRQ 19
> [ 2.364751] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 2.364754] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 2.364807] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
> number 3
> [ 2.364839] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
> [ 2.364942] usb usb3: configuration #1 chosen from 1 choice
> [ 2.364976] hub 3-0:1.0: USB hub found
> [ 2.364987] hub 3-0:1.0: 2 ports detected
> [ 2.365089] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->
> IRQ 18
> [ 2.365097] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 2.365101] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 2.365158] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
> number 4
> [ 2.365188] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
> [ 2.365290] usb usb4: configuration #1 chosen from 1 choice
> [ 2.365323] hub 4-0:1.0: USB hub found
> [ 2.365335] hub 4-0:1.0: 2 ports detected
> [ 2.365506] PNP: No PS/2 controller found. Probing ports directly.
> [ 3.385290] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 3.385505] mice: PS/2 mouse device common for all mice
> [ 3.385678] rtc_cmos 00:05: RTC can wake from S4
> [ 3.385735] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
> [ 3.385761] rtc0: alarms up to one day, 242 bytes nvram
> [ 3.385859] device-mapper: uevent: version 1.0.3
> [ 3.386023] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
> [email protected]
> [ 3.386089] device-mapper: multipath: version 1.0.5 loaded
> [ 3.386094] device-mapper: multipath round-robin: version 1.0.0 loaded
> [ 3.386212] EISA: Probing bus 0 at eisa.0
> [ 3.386250] EISA: Detected 0 cards.
> [ 3.386288] cpuidle: using governor ladder
> [ 3.386291] cpuidle: using governor menu
> [ 3.386953] TCP cubic registered
> [ 3.387058] NET: Registered protocol family 10
> [ 3.387589] lo: Disabled Privacy Extensions
> [ 3.387999] NET: Registered protocol family 17
> [ 3.388056] Bluetooth: L2CAP ver 2.11
> [ 3.388059] Bluetooth: L2CAP socket layer initialized
> [ 3.388062] Bluetooth: SCO (Voice Link) ver 0.6
> [ 3.388064] Bluetooth: SCO socket layer initialized
> [ 3.388117] Bluetooth: RFCOMM socket layer initialized
> [ 3.388129] Bluetooth: RFCOMM TTY layer initialized
> [ 3.388132] Bluetooth: RFCOMM ver 1.10
> [ 3.388193] Using IPI No-Shortcut mode
> [ 3.388330] registered taskstats version 1
> [ 3.388483] Magic number: 13:205:208
> [ 3.388531] vc vcsa: hash matches
> [ 3.388577] rtc_cmos 00:05: setting system clock to 2009-10-24 02:12:28
> UTC (1256350348)
> [ 3.388581] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 3.388584] EDD information not available.
> [ 3.389427] Freeing unused kernel memory: 532k freed
> [ 3.389559] Write protecting the kernel text: 4120k
> [ 3.389604] Write protecting the kernel read-only data: 1524k
> [ 3.491889] vesafb: framebuffer at 0xf8000000, mapped to 0xf0800000,
> using 2560k, total 32768k
> [ 3.491895] vesafb: mode is 1280x1024x8, linelength=1280, pages=24
> [ 3.491898] vesafb: protected mode interface info at c000:4ce6
> [ 3.491901] vesafb: pmi: set display start = c00c4d54, set palette =
> c00c4d8e
> [ 3.491903] vesafb: pmi: ports = e010 e016 e054 e038 e03c e05c e000 e004
> e0b0 e0b2 e0b4
> [ 3.491912] vesafb: scrolling: redraw
> [ 3.491915] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
> [ 3.492089] Console: switching to colour frame buffer device 160x64
> [ 3.511376] fb0: VESA VGA frame buffer device
> [ 3.831645] ohci1394 0000:02:0a.0: PCI INT A -> GSI 19 (level, low) ->
> IRQ 19
> [ 3.882453] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]
> MMIO=[ff6ff800-ff6fffff] Max Packet=[2048] IR/IT contexts=[4/8]
> [ 3.996068] usb 2-2: new full speed USB device using uhci_hcd and
> address 2
> [ 4.168394] usb 2-2: configuration #1 chosen from 1 choice
> [ 4.408055] usb 3-1: new low speed USB device using uhci_hcd and address
> 2
> [ 4.589030] usb 3-1: configuration #1 chosen from 1 choice
> [ 4.603561] usbcore: registered new interface driver hiddev
> [ 4.604543] PM: Starting manual resume from disk
> [ 4.604548] PM: Resume from partition 8:5
> [ 4.604550] PM: Checking hibernation image.
> [ 4.609150] PM: Resume from disk failed.
> [ 4.617977] input: Logitech Logitech USB Keyboard as
> /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
> [ 4.618310] generic-usb 0003:046D:C309.0001: input,hidraw0: USB HID
> v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.1-1/input0
> [ 4.648833] kjournald starting. Commit interval 5 seconds
> [ 4.648855] EXT3-fs: mounted filesystem with ordered data mode.
> [ 4.656303] input: Logitech Logitech USB Keyboard as
> /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input4
> [ 4.677391] generic-usb 0003:046D:C309.0002: input,hidraw1: USB HID
> v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1d.1-1/input1
> [ 4.677419] usbcore: registered new interface driver usbhid
> [ 4.677424] usbhid: v2.6:USB HID core driver
> [ 4.828023] usb 3-2: new low speed USB device using uhci_hcd and address
> 3
> [ 5.003570] usb 3-2: configuration #1 chosen from 1 choice
> [ 5.019832] input: Logitech USB-PS/2 Trackball as
> /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
> [ 5.019977] generic-usb 0003:046D:C402.0003: input,hidraw2: USB HID
> v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:1d.1-2/input0
> [ 5.172165] ieee1394: Host added: ID:BUS[0-00:1023]
> GUID[005042f804601464]
> [ 20.245918] udev: starting version 141
> [ 20.608749] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2
> vid 0x413C pid 0x5210
> [ 20.608785] usbcore: registered new interface driver usblp
> [ 20.982343] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 21.536918] input: PC Speaker as /devices/platform/pcspkr/input/input6
> [ 21.792918] dcdbas dcdbas: Dell Systems Management Base Driver (version
> 5.6.0-3.2)
> [ 21.835914] intel_rng: FWH not detected
> [ 21.854252] Linux agpgart interface v0.103
> [ 21.869205] ieee80211_crypt: registered algorithm 'NULL'
> [ 21.998709] agpgart-intel 0000:00:00.0: Intel 830M Chipset
> [ 22.005156] agpgart-intel 0000:00:00.0: AGP aperture is 128M @
> 0xf0000000
> [ 22.046646] iTCO_vendor_support: vendor-support=0
> [ 22.049680] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
> [ 22.049823] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by
> hardware
> [ 22.049834] iTCO_wdt: No card detected
> [ 22.100219] hostap_pci 0000:02:09.0: PCI INT A -> GSI 18 (level, low) ->
> IRQ 18
> [ 22.101169] hostap_pci: Registered netdevice wifi0
> [ 22.101177] wifi0: Original COR value: 0x2
> [ 22.300487] prism2_hw_init: initialized in 196 ms
> [ 22.301287] wifi0: Interrupt, but dev not configured
> [ 22.301296] wifi0: Interrupt, but dev not configured
> [ 22.301302] wifi0: Interrupt, but dev not configured
> [ 22.301309] wifi0: Interrupt, but dev not configured
> [ 22.301314] wifi0: Interrupt, but dev not configured
> [ 22.301323] wifi0: Interrupt, but dev not configured
> [ 22.301329] wifi0: Interrupt, but dev not configured
> [ 22.301335] wifi0: Interrupt, but dev not configured
> [ 22.301341] wifi0: Interrupt, but dev not configured
> [ 22.301347] wifi0: Interrupt, but dev not configured
> [ 22.358122] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) ->
> IRQ 17
> [ 22.358422] Intel ICH 0000:00:1f.5: setting latency timer to 64
> [ 22.780023] intel8x0_measure_ac97_clock: measured 54617 usecs
> [ 22.780029] intel8x0: clocking to 48000
> [ 24.300028] wifi0: hfa384x_cmd: entry still in list? (entry=ed752680,
> type=0, res=0)
> [ 24.300042] wifi0: hfa384x_cmd: command was not completed (res=0,
> entry=ed752680, type=0, cmd=0x0021, param0=0xfd0b, EVSTAT=8010 INTEN=0010)
> [ 24.300048] wifi0: interrupt delivery does not seem to work
> [ 24.300054] wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110,
> rid=fd0b, len=8)
> [ 24.300058] Could not get RID for component NIC
> [ 24.300063] hostap_pci: Initialization failed
> [ 24.300068] hostap_pci: hardware initialization failed
> [ 24.300096] hostap_pci 0000:02:09.0: PCI INT A disabled
> [ 24.470903] lp: driver loaded but no devices found
> [ 24.818181] Adding 578300k swap on /dev/sda5. Priority:-1 extents:1
> across:578300k
> [ 25.386085] EXT3 FS on sda1, internal journal
> [ 26.776490] type=1505 audit(1256350371.887:2): operation="profile_load"
> name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1965
> [ 26.842801] type=1505 audit(1256350371.951:3): operation="profile_load"
> name="/sbin/dhclient-script" name2="default" pid=1969
> [ 26.843115] type=1505 audit(1256350371.951:4): operation="profile_load"
> name="/sbin/dhclient3" name2="default" pid=1969
> [ 26.843192] type=1505 audit(1256350371.951:5): operation="profile_load"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default"
> pid=1969
> [ 26.843260] type=1505 audit(1256350371.951:6): operation="profile_load"
> name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1969
> [ 26.916948] type=1505 audit(1256350372.027:7): operation="profile_load"
> name="/usr/bin/freshclam" name2="default" pid=1976
> [ 27.094768] type=1505 audit(1256350372.203:8): operation="profile_load"
> name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1980
> [ 27.095169] type=1505 audit(1256350372.203:9): operation="profile_load"
> name="/usr/sbin/cupsd" name2="default" pid=1980
> [ 27.136806] type=1505 audit(1256350372.247:10): operation="profile_load"
> name="/usr/sbin/tcpdump" name2="default" pid=1984
> [ 36.234625] ppdev: user-space parallel port driver
> [ 36.980262] mtrr: no MTRR for f8000000,2000000 found
> [ 37.344568] [drm] Initialized drm 1.1.0 20060810
> [ 37.419614] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 37.419891] [drm] Initialized r128 2.5.0 20030725 on minor 0
> [ 37.517723] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
> [ 37.517748] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x
> mode
> [ 37.517783] pci 0000:01:00.0: putting AGP V2 device into 1x mode
>
>
> -------------------
>
> Rebooted into 2.6.28-14-generic
>
> -------------------
> h...@home:~$ sudo hostap_diag wlan0
> Host AP driver diagnostics information for 'wlan0'
>
> NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))
> PRIID: id=0x0015 v1.1.1
> STAID: id=0x001f v1.8.4 (station firmware)
>
>
> To unsubscribe from this bug, go to:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/487978/+subscribe
>
** This bug has been marked a duplicate of bug 432636
Karmic linux-2.6.31-10-generic (and later) breaks hostap
--
HostAP kernel driver cannot load Prism2.5 card
https://bugs.launchpad.net/bugs/487978
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
