Sorry, yes, the lastest release (date 12/14/09, version 2.3.0.0). I have
to add the device and vendor id in "common/rtusb_dev_id.c" file (between
the "ifdef RT35xx ... #endif // RT35xx //") else it doesn't work.
In the "os/linux/config.mk", I enable "HAS_WPA_SUPPLICANT",
"HAS_NATIVE_WPA_SUPPLICANT_SUPPORT", "HAS_QOS_DLS_SUPPORT",
"HAS_DOT11N_DRAFT3_SUPPORT", "HAS_DOT11_N_SUPPORT" and
"HAS_STATS_COUNT". I tried to enable "HAS_CFG80211_SUPPORT" but I have
build errors. for the moment, I dont try others options.
lsusb says:
Bus 001 Device 004: ID 1737:0079 Linksys
ifconfig ra0 says:
ra0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet adr:192.168.2.102 Bcast:192.168.2.255
Masque:255.255.255.0
adr inet6: xxxx::xxxx:xxxx:xxxx:xxxx/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:432694 erreurs:0 :0 overruns:0 frame:0
TX packets:24952 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:104196211 (104.1 MB) Octets transmis:3136614
(3.1 MB)
iwconfig ra0 says:
ra0 Ralink STA ESSID:"xxxxxxx" Nickname:"RT3572STA"
Mode:Managed Frequency=2.462 GHz Access Point:
xx:xx:xx:xx:xx:xx
Bit Rate=130 Mb/s
RTS thr:off Fragment thr:off
Link Quality=100/100 Signal level:-57 dBm Noise level:-63
dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Steve Sinclair > Can you tell me your bit rate when it will work for you
? I think it's too low.
--
Linksys By Cisco WUSB600N v2 Doesn't Work
https://bugs.launchpad.net/bugs/408165
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
