I'm getting a similar warning on my Dell Vostro 1310 with a Samsung
Drive.
Palimpsest reports something about drive failing and drive has many corrupt
sectors. What it doesn't like is the number of the current pending sector.
smartctl does not indicate any problem:
o...@hermes:~$ sudo smartctl -a /dev/sda
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HM160HI
Serial Number: S14QJF0Q613911
Firmware Version: HH100-11
User Capacity: 160.041.885.696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Sun Dec 27 01:11:45 2009 CET
==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for
details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 32) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 61) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 61) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always
- 1
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always
- 2062
4 Start_Stop_Count 0x0032 082 082 000 Old_age Always
- 184167
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 096 096 000 Old_age Always
- 2662
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always
- 1179
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always
- 646
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 41
194 Temperature_Celsius 0x0022 121 085 000 Old_age Always
- 39 (Lifetime Min/Max 5/51)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 132552
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 826
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline
- 2876
199 UDMA_CRC_Error_Count 0x0036 252 252 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 252 252 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 2651 -
# 2 Short offline Completed without error 00% 1 -
# 3 Short offline Completed without error 00% 0 -
# 4 Short offline Aborted by host 150% 0 -
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure
revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Interrupted [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
palimpsest bad sectors false positive
https://bugs.launchpad.net/bugs/438136
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
