Sorry for the mistake adding tags ...
The same is for my notebook Toshiba Satellite Pro 4600 with Ubuntu 9.10
(9.04 worked properly).
After resume (either suspend to RAM or suspend to disk) the network is
disabled and can only be enabled again by reboot.
uname -a
Linux NAME 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686
GNU/Linux
cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
DISTRIB_DESCRIPTION="Ubuntu 9.10"
pccardctl ident
Socket 0:
product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", ""
manfid: 0x0156, 0x0002
function: 6 (network)
lshw -C network
...
*-network
description: Wireless interface
physical id: 1
logical name: eth1
serial: 00:02:2d:23:a1:1c
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=orinoco driverversion=0.15
firmware=Lucent/Agere 6.14 ip=192.168.2.13 multicast=yes wireless=IEEE 802.11b
Driver module: orinoco_cs / orinoco
** Description changed:
- My network doesn't come back after resuming from suspend. There is an error
about not finding firmware.
- I am using apm.
+ The same is for my notebook Toshiba Satellite Pro 4600 with Ubuntu 9.10
+ (9.04 worked properly).
- ch...@paqsaq:/etc$ uname -a
- Linux paqsaq 2.6.31-10-generic #34-Ubuntu SMP Wed Sep 16 00:23:19 UTC 2009
i686 GNU/Linux
+ After resume (either suspend to RAM or suspend to disk) the network is
+ disabled and can only be enabled again by reboot.
- ch...@paqsaq:/etc$ cat /etc/lsb-release
+ uname -a
+ Linux NAME 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686
GNU/Linux
+
+ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
- DISTRIB_DESCRIPTION="Ubuntu karmic (development branch)"
+ DISTRIB_DESCRIPTION="Ubuntu 9.10"
- My wireless pc-card particulars:
-
- ch...@paqsaq:/etc$ pccardctl ident
+ pccardctl ident
Socket 0:
- product info: "Sony Corporation", "PCWA-C100", "Version 01.01", ""
+ product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", ""
manfid: 0x0156, 0x0002
function: 6 (network)
- ch...@paqsaq:/etc$ lshw -C network
- *-network
- description: PCWA-C100
- product: Version 01.01
- vendor: Sony Corporation
- physical id: 0
- slot: Socket 0
- resources: irq:3
+ lshw -C network
+ ...
*-network
description: Wireless interface
- physical id: 2
+ physical id: 1
logical name: eth1
- serial: 08:00:46:ee:ff:ee
+ serial: 00:02:2d:23:a1:1c
capabilities: ethernet physical wireless
- configuration: broadcast=yes driver=orinoco driverversion=0.15
firmware=Lucent/Agere 6.04 ip=192.168.0.103 link=yes multicast=yes
wireless=IEEE 802.
+ configuration: broadcast=yes driver=orinoco driverversion=0.15
firmware=Lucent/Agere 6.14 ip=192.168.2.13 multicast=yes wireless=IEEE 802.11b
- ch...@paqsaq:/etc$ lsmod
- orinoco_cs 13312 1
- orinoco 63600 1 orinoco_cs
- pcmcia 36808 1 orinoco_cs
-
- =-=-=-=-=-
- When resuming, this is printed in the kern.log
- ...
- Sep 24 08:47:12 paqsaq kernel: [45284.304935] eth1: Attempting to download
firmware agere_sta_fw.bin
- Sep 24 08:47:12 paqsaq kernel: [45284.304981] hermes_dld: AUX enable returned 0
- Sep 24 08:47:12 paqsaq kernel: [45284.305910] hermes_dld: AUX disable
returned 0
- Sep 24 08:47:12 paqsaq kernel: [45284.305926] hermes_dld: Actual PDA length
998, Max allowed 1000
- Sep 24 08:47:12 paqsaq kernel: [45284.305940] eth1: Read PDA returned 0
- Sep 24 08:47:12 paqsaq kernel: [45284.306081] orinoco_cs 0.0: firmware:
requesting agere_sta_fw.bin
- Sep 24 08:47:12 paqsaq kernel: [45284.562526] eth1: Cannot find firmware
agere_sta_fw.bin
- Sep 24 08:48:04 paqsaq kernel: [45284.562554] eth1: Error -2 re-initializing
firmware
- Sep 24 08:48:04 paqsaq kernel: [45284.562575] PM: Device 0.0 failed to
resume: error -5
-
- And to get the internet back up, I stop networking using the network
- manager applet, use pccardctl eject and insert, start networking, and
- use the applet to connect to my wireless network. ~~>
-
- Sep 24 08:48:04 paqsaq kernel: [45330.958209] pcmcia_socket pcmcia_socket0:
pccard: card ejected from slot 0
- Sep 24 08:48:04 paqsaq kernel: [45336.641334] pcmcia_socket pcmcia_socket0:
pccard: PCMCIA card inserted into slot 0
- Sep 24 08:48:04 paqsaq kernel: [45336.641667] pcmcia 0.0: pcmcia: registering
new device pcmcia0.0
- Sep 24 08:48:04 paqsaq kernel: [45336.724684] eth0: Hardware identity
0001:0001:0004:0000
- Sep 24 08:48:04 paqsaq kernel: [45336.724810] eth0: Station identity
001f:0001:0006:0004
- Sep 24 08:48:04 paqsaq kernel: [45336.724829] eth0: Firmware determined as
Lucent/Agere 6.04
- Sep 24 08:48:04 paqsaq kernel: [45336.737236] orinoco_cs 0.0: firmware:
requesting agere_sta_fw.bin
- Sep 24 08:48:04 paqsaq kernel: [45336.761426] eth0: Attempting to download
firmware agere_sta_fw.bin
- Sep 24 08:48:04 paqsaq kernel: [45336.761470] hermes_dld: AUX enable returned 0
- Sep 24 08:48:04 paqsaq kernel: [45336.762376] hermes_dld: AUX disable
returned 0
- Sep 24 08:48:04 paqsaq kernel: [45336.762390] hermes_dld: Actual PDA length
998, Max allowed 1000
- Sep 24 08:48:04 paqsaq kernel: [45336.762404] eth0: Read PDA returned 0
- Sep 24 08:48:04 paqsaq kernel: [45336.762425] orinoco_cs 0.0: firmware:
requesting agere_sta_fw.bin
- Sep 24 08:48:04 paqsaq kernel: [45336.812547] eth0: Cannot find firmware
agere_sta_fw.bin
- Sep 24 08:48:04 paqsaq kernel: [45336.812636] eth0: Hardware identity
0001:0001:0004:0000
- Sep 24 08:48:04 paqsaq kernel: [45336.812753] eth0: Station identity
001f:0001:0006:0004
- Sep 24 08:48:04 paqsaq kernel: [45336.812772] eth0: Firmware determined as
Lucent/Agere 6.04
- Sep 24 08:48:04 paqsaq kernel: [45336.812786] eth0: Ad-hoc demo mode supported
- Sep 24 08:48:04 paqsaq kernel: [45336.812799] eth0: WEP supported, 104-bit key
- Sep 24 08:48:04 paqsaq kernel: [45336.812920] eth0: MAC address
08:00:46:ee:ff:ee
- Sep 24 08:48:04 paqsaq kernel: [45336.813025] eth0: Station name "HERMES I"
- Sep 24 08:48:04 paqsaq kernel: [45336.813627] eth0: ready
- Sep 24 08:48:04 paqsaq kernel: [45336.821779] eth0: orinoco_cs at 0.0, irq 3,
io 0x0180-0x01bf
- Sep 24 10:02:54 paqsaq kernel: [45336.945822] udev: renamed network interface
eth0 to eth1
- Sep 24 10:02:54 paqsaq kernel: [45359.662732] ADDRCONF(NETDEV_UP): eth1: link
is not ready
- Sep 24 10:02:54 paqsaq kernel: [45359.678858] eth1: New link status:
Disconnected (0002)
- Sep 24 10:02:54 paqsaq kernel: [45365.157228] eth1: Lucent/Agere firmware
doesn't support manual roaming
- Sep 24 10:02:54 paqsaq kernel: [45368.591851] eth1: New link status:
Connected (0001)
- Sep 24 10:02:54 paqsaq kernel: [45368.592041] ADDRCONF(NETDEV_CHANGE): eth1:
link becomes ready
- Sep 24 10:02:54 paqsaq kernel: [45378.812704] eth1: no IPv6 routers present
+ Driver module: orinoco_cs / orinoco
** Description changed:
- The same is for my notebook Toshiba Satellite Pro 4600 with Ubuntu 9.10
- (9.04 worked properly).
+ My network doesn't come back after resuming from suspend. There is an error
about not finding firmware.
+ I am using apm.
- After resume (either suspend to RAM or suspend to disk) the network is
- disabled and can only be enabled again by reboot.
+ ch...@paqsaq:/etc$ uname -a
+ Linux paqsaq 2.6.31-10-generic #34-Ubuntu SMP Wed Sep 16 00:23:19 UTC 2009
i686 GNU/Linux
- uname -a
- Linux NAME 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686
GNU/Linux
-
- cat /etc/lsb-release
+ ch...@paqsaq:/etc$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
- DISTRIB_DESCRIPTION="Ubuntu 9.10"
+ DISTRIB_DESCRIPTION="Ubuntu karmic (development branch)"
- pccardctl ident
+ My wireless pc-card particulars:
+
+ ch...@paqsaq:/etc$ pccardctl ident
Socket 0:
- product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", ""
+ product info: "Sony Corporation", "PCWA-C100", "Version 01.01", ""
manfid: 0x0156, 0x0002
function: 6 (network)
- lshw -C network
- ...
+ ch...@paqsaq:/etc$ lshw -C network
+ *-network
+ description: PCWA-C100
+ product: Version 01.01
+ vendor: Sony Corporation
+ physical id: 0
+ slot: Socket 0
+ resources: irq:3
*-network
description: Wireless interface
- physical id: 1
+ physical id: 2
logical name: eth1
- serial: 00:02:2d:23:a1:1c
+ serial: 08:00:46:ee:ff:ee
capabilities: ethernet physical wireless
- configuration: broadcast=yes driver=orinoco driverversion=0.15
firmware=Lucent/Agere 6.14 ip=192.168.2.13 multicast=yes wireless=IEEE 802.11b
+ configuration: broadcast=yes driver=orinoco driverversion=0.15
firmware=Lucent/Agere 6.04 ip=192.168.0.103 link=yes multicast=yes
wireless=IEEE 802.
- Driver module: orinoco_cs / orinoco
+ ch...@paqsaq:/etc$ lsmod
+ orinoco_cs 13312 1
+ orinoco 63600 1 orinoco_cs
+ pcmcia 36808 1 orinoco_cs
+
+ =-=-=-=-=-
+ When resuming, this is printed in the kern.log
+ ...
+ Sep 24 08:47:12 paqsaq kernel: [45284.304935] eth1: Attempting to download
firmware agere_sta_fw.bin
+ Sep 24 08:47:12 paqsaq kernel: [45284.304981] hermes_dld: AUX enable returned 0
+ Sep 24 08:47:12 paqsaq kernel: [45284.305910] hermes_dld: AUX disable
returned 0
+ Sep 24 08:47:12 paqsaq kernel: [45284.305926] hermes_dld: Actual PDA length
998, Max allowed 1000
+ Sep 24 08:47:12 paqsaq kernel: [45284.305940] eth1: Read PDA returned 0
+ Sep 24 08:47:12 paqsaq kernel: [45284.306081] orinoco_cs 0.0: firmware:
requesting agere_sta_fw.bin
+ Sep 24 08:47:12 paqsaq kernel: [45284.562526] eth1: Cannot find firmware
agere_sta_fw.bin
+ Sep 24 08:48:04 paqsaq kernel: [45284.562554] eth1: Error -2 re-initializing
firmware
+ Sep 24 08:48:04 paqsaq kernel: [45284.562575] PM: Device 0.0 failed to
resume: error -5
+
+ And to get the internet back up, I stop networking using the network
+ manager applet, use pccardctl eject and insert, start networking, and
+ use the applet to connect to my wireless network. ~~>
+
+ Sep 24 08:48:04 paqsaq kernel: [45330.958209] pcmcia_socket pcmcia_socket0:
pccard: card ejected from slot 0
+ Sep 24 08:48:04 paqsaq kernel: [45336.641334] pcmcia_socket pcmcia_socket0:
pccard: PCMCIA card inserted into slot 0
+ Sep 24 08:48:04 paqsaq kernel: [45336.641667] pcmcia 0.0: pcmcia: registering
new device pcmcia0.0
+ Sep 24 08:48:04 paqsaq kernel: [45336.724684] eth0: Hardware identity
0001:0001:0004:0000
+ Sep 24 08:48:04 paqsaq kernel: [45336.724810] eth0: Station identity
001f:0001:0006:0004
+ Sep 24 08:48:04 paqsaq kernel: [45336.724829] eth0: Firmware determined as
Lucent/Agere 6.04
+ Sep 24 08:48:04 paqsaq kernel: [45336.737236] orinoco_cs 0.0: firmware:
requesting agere_sta_fw.bin
+ Sep 24 08:48:04 paqsaq kernel: [45336.761426] eth0: Attempting to download
firmware agere_sta_fw.bin
+ Sep 24 08:48:04 paqsaq kernel: [45336.761470] hermes_dld: AUX enable returned 0
+ Sep 24 08:48:04 paqsaq kernel: [45336.762376] hermes_dld: AUX disable
returned 0
+ Sep 24 08:48:04 paqsaq kernel: [45336.762390] hermes_dld: Actual PDA length
998, Max allowed 1000
+ Sep 24 08:48:04 paqsaq kernel: [45336.762404] eth0: Read PDA returned 0
+ Sep 24 08:48:04 paqsaq kernel: [45336.762425] orinoco_cs 0.0: firmware:
requesting agere_sta_fw.bin
+ Sep 24 08:48:04 paqsaq kernel: [45336.812547] eth0: Cannot find firmware
agere_sta_fw.bin
+ Sep 24 08:48:04 paqsaq kernel: [45336.812636] eth0: Hardware identity
0001:0001:0004:0000
+ Sep 24 08:48:04 paqsaq kernel: [45336.812753] eth0: Station identity
001f:0001:0006:0004
+ Sep 24 08:48:04 paqsaq kernel: [45336.812772] eth0: Firmware determined as
Lucent/Agere 6.04
+ Sep 24 08:48:04 paqsaq kernel: [45336.812786] eth0: Ad-hoc demo mode supported
+ Sep 24 08:48:04 paqsaq kernel: [45336.812799] eth0: WEP supported, 104-bit key
+ Sep 24 08:48:04 paqsaq kernel: [45336.812920] eth0: MAC address
08:00:46:ee:ff:ee
+ Sep 24 08:48:04 paqsaq kernel: [45336.813025] eth0: Station name "HERMES I"
+ Sep 24 08:48:04 paqsaq kernel: [45336.813627] eth0: ready
+ Sep 24 08:48:04 paqsaq kernel: [45336.821779] eth0: orinoco_cs at 0.0, irq 3,
io 0x0180-0x01bf
+ Sep 24 10:02:54 paqsaq kernel: [45336.945822] udev: renamed network interface
eth0 to eth1
+ Sep 24 10:02:54 paqsaq kernel: [45359.662732] ADDRCONF(NETDEV_UP): eth1: link
is not ready
+ Sep 24 10:02:54 paqsaq kernel: [45359.678858] eth1: New link status:
Disconnected (0002)
+ Sep 24 10:02:54 paqsaq kernel: [45365.157228] eth1: Lucent/Agere firmware
doesn't support manual roaming
+ Sep 24 10:02:54 paqsaq kernel: [45368.591851] eth1: New link status:
Connected (0001)
+ Sep 24 10:02:54 paqsaq kernel: [45368.592041] ADDRCONF(NETDEV_CHANGE): eth1:
link becomes ready
+ Sep 24 10:02:54 paqsaq kernel: [45378.812704] eth1: no IPv6 routers present
--
linux kernel, orinoco doesn't resume after suspend
https://bugs.launchpad.net/bugs/436062
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
