Public bug reported: uname -a > uname-a.log Linux peter-desktop 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux
cat /proc/version_signature > version.log Ubuntu 2.6.31-14.48-generic dmesg > dmesg.log [ 0.199661] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.199796] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.200079] SCSI subsystem initialized [ 0.200103] libata version 3.00 loaded. [ 0.200126] usbcore: registered new interface driver usbfs [ 0.200126] usbcore: registered new interface driver hub [ 0.200126] usbcore: registered new device driver usb [ 0.200126] ACPI: WMI: Mapper loaded [ 0.200126] PCI: Using ACPI for IRQ routing [ 0.212015] Bluetooth: Core ver 2.15 [ 0.212042] NET: Registered protocol family 31 [ 0.212042] Bluetooth: HCI device and connection manager initialized [ 0.212042] Bluetooth: HCI socket layer initialized [ 0.212042] NetLabel: Initializing [ 0.212042] NetLabel: domain hash size = 128 [ 0.212042] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.212055] NetLabel: unlabeled traffic allowed by default [ 0.225265] pnp: PnP ACPI init [ 0.225297] ACPI: bus type pnp registered [ 0.228372] pnp 00:07: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228377] pnp 00:07: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228381] pnp 00:07: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228385] pnp 00:07: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228389] pnp 00:07: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228393] pnp 00:07: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228397] pnp 00:07: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228401] pnp 00:07: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228405] pnp 00:07: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228408] pnp 00:07: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228412] pnp 00:07: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228416] pnp 00:07: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.228420] pnp 00:07: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.230337] pnp: PnP ACPI: found 13 devices [ 0.230341] ACPI: ACPI bus type pnp unregistered [ 0.230347] PnPBIOS: Disabled by ACPI PNP [ 0.230368] system 00:07: ioport range 0x295-0x296 has been reserved [ 0.230373] system 00:07: ioport range 0x3e0-0x3e7 has been reserved [ 0.230377] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.230380] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.230384] system 00:07: ioport range 0x400-0x41f has been reserved [ 0.230390] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved [ 0.230400] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.230404] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.230414] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.230418] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.230422] system 00:0c: iomem range 0x100000-0x3fffffff could not be reserved [ 0.265177] AppArmor: AppArmor Filesystem Enabled [ 0.265220] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.265224] pci 0000:00:01.0: IO window: disabled [ 0.265231] pci 0000:00:01.0: MEM window: 0xf3e00000-0xf7efffff [ 0.265237] pci 0000:00:01.0: PREFETCH window: 0xcbd00000-0xebcfffff [ 0.265264] pci 0000:00:01.0: setting latency timer to 64 [ 0.265271] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.265275] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.265279] pci_bus 0000:01: resource 1 mem: [0xf3e00000-0xf7efffff] [ 0.265282] pci_bus 0000:01: resource 2 pref mem [0xcbd00000-0xebcfffff] [ 0.265338] NET: Registered protocol family 2 [ 0.265482] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.266033] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.267097] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.267963] TCP: Hash tables configured (established 131072 bind 65536) [ 0.267967] TCP reno registered [ 0.268188] NET: Registered protocol family 1 [ 0.268308] Trying to unpack rootfs image as initramfs... [ 0.520615] Freeing initrd memory: 7461k freed [ 0.534659] cpufreq-nforce2: No nForce2 chipset. [ 0.534707] Scanning for low memory corruption every 60 seconds [ 0.534865] audit: initializing netlink socket (disabled) [ 0.534894] type=2000 audit(1264665207.532:1): initialized [ 0.543997] highmem bounce pool size: 64 pages [ 0.544006] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.545946] VFS: Disk quotas dquot_6.5.2 [ 0.546032] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.546776] fuse init (API version 7.12) [ 0.546890] msgmni has been set to 1731 [ 0.547209] alg: No test for stdrng (krng) [ 0.547231] io scheduler noop registered [ 0.547234] io scheduler anticipatory registered [ 0.547237] io scheduler deadline registered [ 0.547295] io scheduler cfq registered (default) [ 0.547319] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.547413] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 0.547435] pci 0000:01:00.0: Boot video device [ 0.547578] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.547614] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.547798] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.547804] ACPI: Power Button [PWRF] [ 0.547886] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.547890] ACPI: Power Button [PWRB] [ 0.548284] processor LNXCPU:00: registered as cooling_device0 [ 0.548341] processor LNXCPU:01: registered as cooling_device1 [ 0.551447] isapnp: Scanning for PnP cards... [ 0.765327] Switched to high resolution mode on CPU 1 [ 0.768071] Switched to high resolution mode on CPU 0 [ 0.905469] isapnp: No Plug & Play device found [ 0.907008] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.907133] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.907639] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.909038] brd: module loaded [ 0.909739] loop: module loaded [ 0.909858] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.910715] pata_via 0000:00:0f.1: version 0.3.4 [ 0.910742] alloc irq_desc for 20 on node -1 [ 0.910745] alloc kstat_irqs on node -1 [ 0.910756] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.911023] scsi0 : pata_via [ 0.911164] scsi1 : pata_via [ 0.913793] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.913797] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.913975] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.914037] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.914461] Fixed MDIO Bus: probed [ 0.914513] PPP generic driver version 2.4.2 [ 0.914649] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.914675] alloc irq_desc for 21 on node -1 [ 0.914679] alloc kstat_irqs on node -1 [ 0.914686] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.914705] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.914787] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.914873] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf7fff800 [ 0.924014] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.924132] usb usb1: configuration #1 chosen from 1 choice [ 0.924175] hub 1-0:1.0: USB hub found [ 0.924189] hub 1-0:1.0: 8 ports detected [ 0.924280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.924305] uhci_hcd: USB Universal Host Controller Interface driver [ 0.924350] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.924358] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.924409] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.924434] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00 [ 0.924541] usb usb2: configuration #1 chosen from 1 choice [ 0.924578] hub 2-0:1.0: USB hub found [ 0.924588] hub 2-0:1.0: 2 ports detected [ 0.924656] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.924664] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.924711] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.924736] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e000 [ 0.924846] usb usb3: configuration #1 chosen from 1 choice [ 0.924882] hub 3-0:1.0: USB hub found [ 0.924896] hub 3-0:1.0: 2 ports detected [ 0.924964] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.924972] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.925024] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.925049] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e080 [ 0.925163] usb usb4: configuration #1 chosen from 1 choice [ 0.925199] hub 4-0:1.0: USB hub found [ 0.925209] hub 4-0:1.0: 2 ports detected [ 0.925275] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.925283] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.925337] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.925362] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00 [ 0.925466] usb usb5: configuration #1 chosen from 1 choice [ 0.925507] hub 5-0:1.0: USB hub found [ 0.925522] hub 5-0:1.0: 2 ports detected [ 0.925665] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.926140] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.926150] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.926233] mice: PS/2 mouse device common for all mice [ 0.926358] rtc_cmos 00:02: RTC can wake from S4 [ 0.926405] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.926462] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.926607] device-mapper: uevent: version 1.0.3 [ 0.926758] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] [ 0.926870] device-mapper: multipath: version 1.1.0 loaded [ 0.926875] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.927039] EISA: Probing bus 0 at eisa.0 [ 0.927047] Cannot allocate resource for EISA slot 1 [ 0.927081] EISA: Detected 0 cards. [ 0.927207] cpuidle: using governor ladder [ 0.927213] cpuidle: using governor menu [ 0.927923] TCP cubic registered [ 0.928111] NET: Registered protocol family 10 [ 0.928752] lo: Disabled Privacy Extensions [ 0.929231] NET: Registered protocol family 17 [ 0.929258] Bluetooth: L2CAP ver 2.13 [ 0.929261] Bluetooth: L2CAP socket layer initialized [ 0.929265] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.929267] Bluetooth: SCO socket layer initialized [ 0.929313] Bluetooth: RFCOMM TTY layer initialized [ 0.929318] Bluetooth: RFCOMM socket layer initialized [ 0.929320] Bluetooth: RFCOMM ver 1.11 [ 0.929371] Using IPI No-Shortcut mode [ 0.929461] PM: Resume from disk failed. [ 0.929481] registered taskstats version 1 [ 0.929627] Magic number: 10:153:876 [ 0.929739] rtc_cmos 00:02: setting system clock to 2010-01-28 07:53:28 UTC (1264665208) [ 0.929743] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.929746] EDD information not available. [ 0.958724] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.076904] ata1.00: ATAPI: LITE-ON DVD SOHD-167T, 9S13, max UDMA/33 [ 1.076950] ata1.01: ATAPI: _NEC DVD_RW ND-2500A, 1.06, max UDMA/33 [ 1.077501] ata1.00: configured for UDMA/33 [ 1.092325] ata1.01: configured for UDMA/33 [ 1.093797] scsi 0:0:0:0: CD-ROM LITE-ON DVD SOHD-167T 9S13 PQ: 0 ANSI: 5 [ 1.095340] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.095345] Uniform CD-ROM driver Revision: 3.20 [ 1.095471] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.095546] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.096596] scsi 0:0:1:0: CD-ROM _NEC DVD_RW ND-2500A 1.06 PQ: 0 ANSI: 5 [ 1.098822] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.098926] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 1.098982] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.236019] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 1.263531] Freeing unused kernel memory: 540k freed [ 1.264382] Write protecting the kernel text: 4568k [ 1.264440] Write protecting the kernel read-only data: 1836k [ 1.364373] usb 1-6: device descriptor read/64, error -71 [ 1.445849] Linux agpgart interface v0.103 [ 1.451629] agpgart: Detected VIA VT3314 chipset [ 1.464659] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 1.464696] sata_via 0000:00:0f.0: version 2.4 [ 1.464717] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.464790] sata_via 0000:00:0f.0: routed to hard irq line 5 [ 1.479173] scsi2 : sata_via [ 1.479354] scsi3 : sata_via [ 1.479428] ata3: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd080 irq 20 [ 1.479435] ata4: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xd088 irq 20 [ 1.539761] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.539867] alloc irq_desc for 23 on node -1 [ 1.539873] alloc kstat_irqs on node -1 [ 1.539886] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.541445] eth0: VIA Rhine II at 0xf7fffc00, 00:1b:fc:56:4f:d5, IRQ 23. [ 1.542167] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 1.545943] Floppy drive(s): fd0 is 1.44M [ 1.598962] FDC 0 is a post-1991 82077 [ 1.680022] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.844243] ata3.00: ATA-7: WDC WD2500YD-01NVB1, 10.02E01, max UDMA/133 [ 1.844248] ata3.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/1) [ 1.852259] ata3.00: configured for UDMA/133 [ 1.852424] scsi 2:0:0:0: Direct-Access ATA WDC WD2500YD-01N 10.0 PQ: 0 ANSI: 5 [ 1.852717] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.852817] sd 2:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB) [ 1.852900] sd 2:0:0:0: [sda] Write Protect is off [ 1.852905] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.852941] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.853153] sda: sda1 sda2 < sda5 sda6 sda7 > [ 1.884540] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.056030] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 3.400761] PM: Starting manual resume from disk [ 3.400767] PM: Resume from partition 8:7 [ 3.400770] PM: Checking hibernation image. [ 3.400954] PM: Resume from disk failed. [ 3.406000] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 3.406007] EXT4-fs (sda6): write access will be enabled during recovery [ 3.425847] EXT4-fs (sda6): barriers enabled [ 4.066724] kjournald2 starting: pid 379, dev sda6:8, commit interval 5 seconds [ 4.066747] EXT4-fs (sda6): delayed allocation enabled [ 4.066754] EXT4-fs: file extents enabled [ 4.077765] EXT4-fs: mballoc enabled [ 4.077788] EXT4-fs (sda6): recovery complete [ 4.078529] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 4.525392] type=1505 audit(1264665212.094:2): operation="profile_load" pid=402 name=/usr/share/gdm/guest-session/Xsession [ 4.538040] type=1505 audit(1264665212.106:3): operation="profile_load" pid=403 name=/sbin/dhclient3 [ 4.538777] type=1505 audit(1264665212.106:4): operation="profile_load" pid=403 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.539184] type=1505 audit(1264665212.106:5): operation="profile_load" pid=403 name=/usr/lib/connman/scripts/dhclient-script [ 4.578116] type=1505 audit(1264665212.146:6): operation="profile_load" pid=404 name=/usr/bin/evince [ 4.590121] type=1505 audit(1264665212.158:7): operation="profile_load" pid=404 name=/usr/bin/evince-previewer [ 4.597205] type=1505 audit(1264665212.166:8): operation="profile_load" pid=404 name=/usr/bin/evince-thumbnailer [ 4.620660] type=1505 audit(1264665212.190:9): operation="profile_load" pid=406 name=/usr/lib/cups/backend/cups-pdf [ 4.621530] type=1505 audit(1264665212.190:10): operation="profile_load" pid=406 name=/usr/sbin/cupsd [ 5.341410] Adding 2931788k swap on /dev/sda7. Priority:-1 extents:1 across:2931788k [ 5.499874] udev: starting version 147 [ 5.617241] EXT4-fs (sda6): internal journal on sda6:8 [ 5.900315] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.916157] Linux video capture interface: v2.00 [ 6.071020] ivtv: Start initialization, version 1.4.1 [ 6.071341] ivtv0: Initializing card 0 [ 6.071350] ivtv0: Autodetected Hauppauge card (cx23415 based) [ 6.071655] alloc irq_desc for 19 on node -1 [ 6.071662] alloc kstat_irqs on node -1 [ 6.071679] ivtv 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6.071699] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 6.126840] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2776020 [ 6.126847] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5) [ 6.126851] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) [ 6.126856] tveeprom 0-0050: audio processor is MSP4418 (idx 25) [ 6.126859] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) [ 6.126863] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter [ 6.126868] ivtv0: Autodetected Hauppauge WinTV PVR-350 [ 6.191526] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) [ 6.271960] psmouse serio1: ID: 10 00 64 [ 6.365562] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) [ 6.415114] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) [ 6.415120] msp3400 0-0040: msp3400 supports nicam and radio, mode is autodetect and autoselect [ 6.440565] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 6.627229] tuner-simple 0-0061: creating new instance [ 6.627237] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 6.632975] usb 1-6: configuration #1 chosen from 1 choice [ 6.639812] IRQ 19/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 6.640474] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 6.640527] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 6.640578] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 6.640625] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 6.640672] ivtv0: Registered device radio0 for encoder radio [ 6.640719] ivtv0: Registered device video16 for decoder MPG (1024 kB) [ 6.640765] ivtv0: Registered device vbi8 for decoder VBI (64 kB) [ 6.640811] ivtv0: Registered device vbi16 for decoder VOUT [ 6.640857] ivtv0: Registered device video48 for decoder YUV (1024 kB) [ 6.640863] ivtv0: Initialized card: Hauppauge WinTV PVR-350 [ 6.640918] ivtv: End initialization [ 6.752012] Initializing USB Mass Storage driver... [ 6.753578] scsi4 : SCSI emulation for USB Mass Storage devices [ 6.753948] usbcore: registered new interface driver usb-storage [ 6.753956] USB Mass Storage support registered. [ 6.754457] usb-storage: device found at 2 [ 6.754462] usb-storage: waiting for device to settle before scanning [ 6.917902] lp: driver loaded but no devices found [ 6.923212] parport_pc 00:06: reported by Plug and Play ACPI [ 6.923350] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 6.937665] __ratelimit: 3 callbacks suppressed [ 6.937672] type=1505 audit(1264661614.506:12): operation="profile_replace" pid=746 name=/usr/share/gdm/guest-session/Xsession [ 6.940494] type=1505 audit(1264661614.510:13): operation="profile_replace" pid=747 name=/sbin/dhclient3 [ 6.941243] type=1505 audit(1264661614.510:14): operation="profile_replace" pid=747 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 6.941672] type=1505 audit(1264661614.510:15): operation="profile_replace" pid=747 name=/usr/lib/connman/scripts/dhclient-script [ 6.949596] type=1505 audit(1264661614.518:16): operation="profile_replace" pid=748 name=/usr/bin/evince [ 6.961908] type=1505 audit(1264661614.530:17): operation="profile_replace" pid=748 name=/usr/bin/evince-previewer [ 6.969765] type=1505 audit(1264661614.538:18): operation="profile_replace" pid=748 name=/usr/bin/evince-thumbnailer [ 6.981978] type=1505 audit(1264661614.550:19): operation="profile_replace" pid=751 name=/usr/lib/cups/backend/cups-pdf [ 6.982847] type=1505 audit(1264661614.550:20): operation="profile_replace" pid=751 name=/usr/sbin/cupsd [ 6.986581] type=1505 audit(1264661614.554:21): operation="profile_replace" pid=752 name=/usr/sbin/tcpdump [ 6.997191] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 7.012309] lp0: using parport0 (interrupt-driven). [ 7.080318] ppdev: user-space parallel port driver [ 7.112532] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.292023] ivtv 0000:00:0b.0: firmware: requesting v4l-cx2341x-enc.fw [ 7.364413] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 7.364445] ivtv 0000:00:0b.0: firmware: requesting v4l-cx2341x-dec.fw [ 7.399392] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes) [ 7.597599] ivtv0: Encoder revision: 0x02060039 [ 7.597737] ivtv0: Decoder revision: 0x02020023 [ 7.636245] ivtv 0000:00:0b.0: firmware: requesting v4l-cx2341x-init.mpg [ 7.810675] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes) [ 8.327742] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) [ 8.327760] alloc irq_desc for 22 on node -1 [ 8.327766] alloc kstat_irqs on node -1 [ 8.327780] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 9.081025] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 9.585274] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled [ 9.585303] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 [ 9.717111] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 9.717282] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 9.854435] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 11.753246] usb-storage: device scan complete [ 11.757331] scsi 4:0:0:0: Direct-Access GENERIC USB Storage-CFC I19B PQ: 0 ANSI: 0 CCS [ 11.762986] scsi 4:0:0:1: Direct-Access GENERIC USB Storage-MSC I19B PQ: 0 ANSI: 0 CCS [ 11.767092] scsi 4:0:0:2: Direct-Access GENERIC USB Storage-SMC I19B PQ: 0 ANSI: 0 CCS [ 11.771077] scsi 4:0:0:3: Direct-Access GENERIC USB Storage-SDC I19B PQ: 0 ANSI: 0 CCS [ 11.771859] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 11.771996] sd 4:0:0:1: Attached scsi generic sg4 type 0 [ 11.772181] sd 4:0:0:2: Attached scsi generic sg5 type 0 [ 11.772379] sd 4:0:0:3: Attached scsi generic sg6 type 0 [ 11.786289] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 11.788394] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 11.796601] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 11.797725] sd 4:0:0:3: [sde] 1990656 512-byte logical blocks: (1.01 GB/972 MiB) [ 11.802831] sd 4:0:0:3: [sde] Write Protect is off [ 11.802840] sd 4:0:0:3: [sde] Mode Sense: 03 00 00 00 [ 11.802845] sd 4:0:0:3: [sde] Assuming drive cache: write through [ 11.821105] sd 4:0:0:3: [sde] Assuming drive cache: write through [ 11.821205] sde: [ 11.830719] sd 4:0:0:3: [sde] Assuming drive cache: write through [ 11.830804] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 20.146936] eth0: no IPv6 routers present [ 20.932028] usb 1-6: reset high speed USB device using ehci_hcd and address 2 [ 28.933084] usb 1-6: reset high speed USB device using ehci_hcd and address 2 [ 36.928027] usb 1-6: reset high speed USB device using ehci_hcd and address 2 [ 44.928025] usb 1-6: reset high speed USB device using ehci_hcd and address 2 [ 52.928025] usb 1-6: reset high speed USB device using ehci_hcd and address 2 [ 60.928031] usb 1-6: reset high speed USB device using ehci_hcd and address 2 [ 68.920023] usb 1-6: reset high speed USB device using ehci_hcd and address 2 [ 76.936038] usb 1-6: reset high speed USB device using ehci_hcd and address 2 [ 77.143753] CPU0 attaching NULL sched-domain. [ 77.143767] CPU1 attaching NULL sched-domain. [ 77.153179] CPU0 attaching sched-domain: [ 77.153187] domain 0: span 0-1 level SIBLING [ 77.153193] groups: 0 1 [ 77.153200] domain 1: span 0-1 level MC [ 77.153205] groups: 0-1 (__cpu_power = 2048) [ 77.153215] CPU1 attaching sched-domain: [ 77.153219] domain 0: span 0-1 level SIBLING [ 77.153223] groups: 1 0 [ 77.153230] domain 1: span 0-1 level MC [ 77.153234] groups: 0-1 (__cpu_power = 2048) [ 564.253679] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 564.260733] SGI XFS Quota Management subsystem [ 564.280336] JFS: nTxBlock = 8017, nTxLock = 64139 [ 564.336419] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 564.408967] QNX4 filesystem 0.2.3 registered. [ 568.930625] type=1505 audit(1264662176.499:22): operation="profile_replace" pid=11701 name=/sbin/dhclient3 [ 568.931370] type=1505 audit(1264662176.499:23): operation="profile_replace" pid=11701 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 568.931852] type=1505 audit(1264662176.499:24): operation="profile_replace" pid=11701 name=/usr/lib/connman/scripts/dhclient-script [ 571.830695] udev: starting version 147 [ 575.001614] type=1505 audit(1264662182.570:25): operation="profile_replace" pid=11934 name=/usr/share/gdm/guest-session/Xsession [ 575.005012] type=1505 audit(1264662182.574:26): operation="profile_replace" pid=11935 name=/sbin/dhclient3 [ 575.005763] type=1505 audit(1264662182.574:27): operation="profile_replace" pid=11935 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 575.006169] type=1505 audit(1264662182.574:28): operation="profile_replace" pid=11935 name=/usr/lib/connman/scripts/dhclient-script [ 575.034027] type=1505 audit(1264662182.602:29): operation="profile_replace" pid=11936 name=/usr/bin/evince [ 575.046579] type=1505 audit(1264662182.614:30): operation="profile_replace" pid=11936 name=/usr/bin/evince-previewer [ 575.056523] type=1505 audit(1264662182.626:31): operation="profile_replace" pid=11936 name=/usr/bin/evince-thumbnailer [ 575.085209] type=1505 audit(1264662182.654:32): operation="profile_replace" pid=11938 name=/usr/lib/cups/backend/cups-pdf [ 575.086079] type=1505 audit(1264662182.654:33): operation="profile_replace" pid=11938 name=/usr/sbin/cupsd [ 575.101375] type=1505 audit(1264662182.670:34): operation="profile_replace" pid=11939 name=/usr/sbin/tcpdump [ 588.102910] __ratelimit: 12 callbacks suppressed [ 588.102916] type=1505 audit(1264662195.670:39): operation="profile_replace" pid=11971 name=/usr/bin/evince [ 588.106097] type=1505 audit(1264662195.674:40): operation="profile_replace" pid=11971 name=/usr/bin/evince-previewer [ 588.107782] type=1505 audit(1264662195.674:41): operation="profile_replace" pid=11971 name=/usr/bin/evince-thumbnailer [ 588.437081] type=1505 audit(1264662196.006:42): operation="profile_replace" pid=11973 name=/usr/lib/cups/backend/cups-pdf [ 588.437492] type=1505 audit(1264662196.006:43): operation="profile_replace" pid=11973 name=/usr/sbin/cupsd [ 588.526172] type=1505 audit(1264662196.094:44): operation="profile_replace" pid=11974 name=/usr/sbin/tcpdump [ 610.015263] type=1505 audit(1264662217.582:45): operation="profile_replace" pid=13505 name=/usr/lib/cups/backend/cups-pdf [ 610.016165] type=1505 audit(1264662217.586:46): operation="profile_replace" pid=13505 name=/usr/sbin/cupsd [ 635.772589] type=1505 audit(1264662243.342:47): operation="profile_replace" pid=13649 name=/usr/bin/evince [ 635.775393] type=1505 audit(1264662243.342:48): operation="profile_replace" pid=13649 name=/usr/bin/evince-previewer [ 635.778074] type=1505 audit(1264662243.346:49): operation="profile_replace" pid=13649 name=/usr/bin/evince-thumbnailer pe...@peter-desktop:~$ sudo lspci -vnvn > lspci-vnvn.log lspci -vnvn [sudo] password for peter: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314] Subsystem: ASUSTeK Computer Inc. Device [1043:0314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 8 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [80] AGP version 3.5 Status: RQ=8 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: agpgart-via Kernel modules: via-agp 00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:1314] Subsystem: ASUSTeK Computer Inc. Device [1043:1314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:2314] Subsystem: ASUSTeK Computer Inc. Device [1043:2314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: via-agp 00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:4314] Subsystem: ASUSTeK Computer Inc. Device [1043:4314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:7314] Subsystem: ASUSTeK Computer Inc. Device [1043:7314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: f3e00000-f7efffff Prefetchable memory behind bridge: cbd00000-ebcfffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: shpchp 00:0b.0 Multimedia video controller [0400]: Internext Compression Inc iTVC15 MPEG-2 Encoder [4444:0803] (rev 01) Subsystem: Hauppauge computer works Inc. Device [0070:4000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ivtv Kernel modules: ivtv 00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:3149] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at d880 [size=8] Region 1: I/O ports at d800 [size=4] Region 2: I/O ports at d480 [size=8] Region 3: I/O ports at d400 [size=4] Region 4: I/O ports at d080 [size=16] Region 5: I/O ports at ee00 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_via Kernel modules: sata_via 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:0571] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 20 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at fc00 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_via 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. Device [1043:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at dc00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. Device [1043:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at e000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. Device [1043:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at e080 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. Device [1043:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at ec00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20) Subsystem: ASUSTeK Computer Inc. Device [1043:3104] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 128 bytes Interrupt: pin C routed to IRQ 21 Region 0: Memory at f7fff800 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] Subsystem: ASUSTeK Computer Inc. Device [1043:3227] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: i2c-viapro 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60) Subsystem: ASUSTeK Computer Inc. Device [1043:8198] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 22 Region 0: I/O ports at e400 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: VIA 82xx Audio Kernel modules: snd-via82xx 00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 22 Region 0: I/O ports at 1000 [size=256] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: snd-via82xx-modem 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78) Subsystem: ASUSTeK Computer Inc. Device [1043:80ff] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at e800 [size=256] Region 1: Memory at f7fffc00 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: via-rhine Kernel modules: via-rhine 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44A [GeForce 6200] [10de:0221] (rev a1) Subsystem: eVga.com. Corp. Device [3842:a341] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 2: Memory at f5000000 (32-bit, non-prefetchable) [size=16M] Expansion ROM at f7ee0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Kernel modules: nvidiafb pe...@peter-desktop:~$ ProblemType: Bug Architecture: i386 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: peter 1742 F.... pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'V8237'/'VIA 8237 with CMI9761A+ at 0xe400, irq 22' Mixer name : 'C-Media Electronics CMI9761A+' Components : 'AC97a:434d4983' Controls : 41 Simple ctrls : 30 Date: Thu Jan 28 08:09:19 2010 DistroRelease: Ubuntu 9.10 HibernationDevice: RESUME=UUID=ae5a48d5-3772-4a67-8fec-99fcae9bc2c4 InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5) IwConfig: lo no wireless extensions. eth0 no wireless extensions. MachineType: System manufacturer P4V8X-MX Package: linux-image-2.6.31-14-generic 2.6.31-14.48 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=bbf916c3-ef47-4eee-a619-d81fed1f115e ro quiet splash ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-14.48-generic RelatedPackageVersions: linux-backports-modules-2.6.31-14-generic N/A linux-firmware 1.25 RfKill: SourcePackage: linux Uname: Linux 2.6.31-14-generic i686 XsessionErrors: (gnome-settings-daemon:1756): GLib-CRITICAL **: g_propagate_error: assertion `src != NULL' failed (gnome-settings-daemon:1756): GLib-CRITICAL **: g_propagate_error: assertion `src != NULL' failed (polkit-gnome-authentication-agent-1:1832): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed (nautilus:1816): Eel-CRITICAL **: eel_preferences_get_boolean: assertion `preferences_is_initialized ()' failed dmi.bios.date: 07/24/2006 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 080012 dmi.board.asset.tag: 00000000 dmi.board.name: P4V8X-MX dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 2.00 dmi.chassis.asset.tag: 00000000 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: 1.00 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr080012:bd07/24/2006:svnSystemmanufacturer:pnP4V8X-MX:pvr1.00:rvnASUSTeKComputerINC.:rnP4V8X-MX:rvrRev2.00:cvnChassisManufacture:ct3:cvr1.00: dmi.product.name: P4V8X-MX dmi.product.version: 1.00 dmi.sys.vendor: System manufacturer ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 -- WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:52 suspend_test_finish+0x80/0x90() https://bugs.launchpad.net/bugs/513640 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
