Public bug reported:
1,12
[ 1.147557] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.147569] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.147705] mice: PS/2 mouse device common for all mice
[ 1.147965] rtc_cmos 00:03: RTC can wake from S4
[ 1.150153] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.150192] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.150431] device-mapper: uevent: version 1.0.3
[ 1.150669] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
[email protected]
[ 1.150777] device-mapper: multipath: version 1.1.0 loaded
[ 1.150782] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.151060] EISA: Probing bus 0 at eisa.0
[ 1.151102] EISA: Detected 0 cards.
[ 1.151194] cpuidle: using governor ladder
[ 1.151199] cpuidle: using governor menu
[ 1.152296] TCP cubic registered
[ 1.152647] NET: Registered protocol family 10
[ 1.153536] lo: Disabled Privacy Extensions
[ 1.154165] NET: Registered protocol family 17
[ 1.154206] Bluetooth: L2CAP ver 2.13
[ 1.154213] Bluetooth: L2CAP socket layer initialized
[ 1.154218] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.154222] Bluetooth: SCO socket layer initialized
[ 1.154311] Bluetooth: RFCOMM TTY layer initialized
[ 1.154318] Bluetooth: RFCOMM socket layer initialized
[ 1.154322] Bluetooth: RFCOMM ver 1.11
[ 1.154382] Using IPI No-Shortcut mode
[ 1.154527] PM: Resume from disk failed.
[ 1.154552] registered taskstats version 1
[ 1.154754] Magic number: 14:94:896
[ 1.154889] rtc_cmos 00:03: setting system clock to 2010-02-13 17:52:46 UTC
(1266083566)
[ 1.154896] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.154900] EDD information not available.
[ 1.192981] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[ 1.264351] ata2.00: CFA: ASUS-PHISON SSD, TST2.04P, max UDMA/66
[ 1.264359] ata2.00: 15761088 sectors, multi 0: LBA
[ 1.272266] ata2.00: configured for UDMA/66
[ 1.376504] ACPI: Battery Slot [BAT0] (battery present)
[ 1.377180] scsi 1:0:0:0: Direct-Access ATA ASUS-PHISON SSD TST2
PQ: 0 ANSI: 5
[ 1.377455] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.377548] sd 1:0:0:0: [sda] 15761088 512-byte logical blocks: (8.06
GB/7.51 GiB)
[ 1.377654] sd 1:0:0:0: [sda] Write Protect is off
[ 1.377661] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.377715] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.377997] sda: sda1 sda2 < sda5 >
[ 1.380437] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.380468] Freeing unused kernel memory: 540k freed
[ 1.381033] Write protecting the kernel text: 4568k
[ 1.381114] Write protecting the kernel read-only data: 1836k
[ 1.420165] usb 1-8: new high speed USB device using ehci_hcd and address 2
[ 1.602946] usb 1-8: configuration #1 chosen from 1 choice
[ 1.750993] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:16/input/input6
[ 1.751071] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.899774] Linux agpgart interface v0.103
[ 1.907500] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 1.907748] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.955436] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.955460] ATL1E 0000:03:00.0: setting latency timer to 64
[ 1.967306] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 2.021032] [drm] Initialized drm 1.1.0 20060810
[ 2.053174] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.053185] i915 0000:00:02.0: setting latency timer to 64
[ 2.065054] i2c-adapter i2c-1: unable to read EDID block.
[ 2.065065] i915 0000:00:02.0: LVDS-1: no EDID data
[ 2.353705] [drm] DAC-6: set mode 640x480 0
[ 2.449679] i2c-adapter i2c-1: unable to read EDID block.
[ 2.449691] i915 0000:00:02.0: LVDS-1: no EDID data
[ 2.490592] [drm] TV-12: set mode NTSC 480i 0
[ 2.615231] [drm] fb0: inteldrmfb frame buffer device
[ 2.615250] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.688235] render error detected, EIR: 0x00000010
[ 2.688241] page table error
[ 2.688244] PGTBL_ER: 0x00000100
[ 2.688250] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 2.688263] render error detected, EIR: 0x00000010
[ 2.688266] page table error
[ 2.688269] PGTBL_ER: 0x00000100
[ 2.700809] [drm] LVDS-8: set mode 800x480 16
[ 2.743520] Console: switching to colour frame buffer device 100x30
[ 3.225701] PM: Starting manual resume from disk
[ 3.225710] PM: Resume from partition 8:5
[ 3.225715] PM: Checking hibernation image.
[ 3.226278] PM: Resume from disk failed.
[ 3.233117] EXT4-fs (sda1): barriers enabled
[ 3.237103] kjournald2 starting: pid 339, dev sda1:8, commit interval 5
seconds
[ 3.237129] EXT4-fs (sda1): delayed allocation enabled
[ 3.237136] EXT4-fs: file extents enabled
[ 3.237251] EXT4-fs: mballoc enabled
[ 3.237287] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.466753] type=1505 audit(1266083568.809:2): operation="profile_load"
pid=362 name=/usr/share/gdm/guest-session/Xsession
[ 3.473232] type=1505 audit(1266083568.817:3): operation="profile_load"
pid=363 name=/sbin/dhclient3
[ 3.474645] type=1505 audit(1266083568.817:4): operation="profile_load"
pid=363 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.475422] type=1505 audit(1266083568.817:5): operation="profile_load"
pid=363 name=/usr/lib/connman/scripts/dhclient-script
[ 3.503029] type=1505 audit(1266083568.845:6): operation="profile_load"
pid=364 name=/usr/bin/evince
[ 3.525361] type=1505 audit(1266083568.869:7): operation="profile_load"
pid=364 name=/usr/bin/evince-previewer
[ 3.538420] type=1505 audit(1266083568.881:8): operation="profile_load"
pid=364 name=/usr/bin/evince-thumbnailer
[ 3.563320] type=1505 audit(1266083568.905:9): operation="profile_load"
pid=366 name=/usr/lib/cups/backend/cups-pdf
[ 4.006107] Adding 393552k swap on /dev/sda5. Priority:-1 extents:1
across:393552k
[ 4.074480] EXT4-fs (sda1): internal journal on sda1:8
[ 4.259897] udev: starting version 147
[ 4.392156] eeepc_laptop: Eee PC Hotkey Driver
[ 4.392310] eeepc_laptop: Hotkey init flags 0x41
[ 4.393320] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling
anyway
[ 4.393330] eeepc_laptop: Get control methods supported: 0x2101711
[ 4.393454] input: Asus EeePC extra buttons as /devices/virtual/input/input7
[ 4.529532] lp: driver loaded but no devices found
[ 5.049514] rtl8187se: module is from the staging directory, the quality is
unknown, you have been warned.
[ 5.067375] ieee80211_crypt: registered algorithm 'NULL'
[ 5.067383] ieee80211_crypt: registered algorithm 'TKIP'
[ 5.067388] ieee80211_crypt: registered algorithm 'CCMP'
[ 5.067392] ieee80211_crypt: registered algorithm 'WEP'
[ 5.067396]
[ 5.067398] Linux kernel driver for RTL8180 / RTL8185 based WLAN cards
[ 5.067403] Copyright (c) 2004-2005, Andrea Merello
[ 5.067406] r8180: Initializing module
[ 5.067410] r8180: Wireless extensions version 22
[ 5.067414] r8180: Initializing proc filesystem
[ 5.067477] r8180: Configuring chip resources
[ 5.067502] r8180 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.067513] r8180 0000:01:00.0: setting latency timer to 64
[ 5.070147] r8180: Channel plan is 6
[ 5.070150]
[ 5.070155] Dot11d_Init()
[ 5.070163] r8180: MAC controller is a RTL8187SE b/g
[ 5.070167] r8180: This is a PCI NIC
[ 5.072560] r8180: usValue is 0x0
[ 5.072562]
[ 5.127367] r8180: EEPROM version 104
[ 5.132136] r8180: WW:**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!
[ 5.140757] intel_rng: FWH not detected
[ 5.231393] r8180: IRQ 18
[ 5.233111] r8180: Driver probe completed
[ 5.233116]
[ 5.298486] Linux video capture interface: v2.00
[ 5.309896] uvcvideo: Found UVC 1.00 device Digital_Camera (093a:2700)
[ 5.385459] input: Digital_Camera as
/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8
[ 5.385563] usbcore: registered new interface driver uvcvideo
[ 5.385570] USB Video Class driver (v0.1.0)
[ 5.462762] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 5.462826] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.630990] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.732941] psmouse serio1: ID: 10 00 64
[ 6.017999] elantech.c: assuming hardware version 1, firmware version 2.34
[ 6.092448] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input9
[ 6.122203] elantech.c: Synaptics capabilities query result 0x10, 0x02, 0x64.
[ 6.122212] elantech.c: firmware version 2.34 detected, enabling jumpy
cursor workaround
[ 6.637879] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input10
[ 8.467630] alloc irq_desc for 27 on node -1
[ 8.467640] alloc kstat_irqs on node -1
[ 8.467669] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[ 8.467966] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.135061] r8180: Bringing up iface
[ 9.333568] r8180: Card successfully reset
[ 10.071181] r8180: WIRELESS_MODE_G
[ 10.071184]
[ 10.110089] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.561821] __ratelimit: 6 callbacks suppressed
[ 12.561830] type=1505 audit(1266083577.905:12): operation="profile_replace"
pid=820 name=/usr/share/gdm/guest-session/Xsession
[ 12.565847] type=1505 audit(1266083577.909:13): operation="profile_replace"
pid=821 name=/sbin/dhclient3
[ 12.567443] type=1505 audit(1266083577.909:14): operation="profile_replace"
pid=821 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 12.570716] type=1505 audit(1266083577.913:15): operation="profile_replace"
pid=821 name=/usr/lib/connman/scripts/dhclient-script
[ 12.582549] type=1505 audit(1266083577.925:16): operation="profile_replace"
pid=822 name=/usr/bin/evince
[ 12.607526] type=1505 audit(1266083577.949:17): operation="profile_replace"
pid=822 name=/usr/bin/evince-previewer
[ 12.622829] type=1505 audit(1266083577.965:18): operation="profile_replace"
pid=822 name=/usr/bin/evince-thumbnailer
[ 12.642716] type=1505 audit(1266083577.985:19): operation="profile_replace"
pid=824 name=/usr/lib/cups/backend/cups-pdf
[ 12.645414] type=1505 audit(1266083577.989:20): operation="profile_replace"
pid=824 name=/usr/sbin/cupsd
[ 12.650476] type=1505 audit(1266083577.993:21): operation="profile_replace"
pid=825 name=/usr/sbin/tcpdump
[ 15.529625] [drm] DAC-6: set mode 640x480 0
[ 15.649929] [drm] DAC-6: set mode 640x480 0
[ 15.730616] i2c-adapter i2c-1: unable to read EDID block.
[ 15.730626] i915 0000:00:02.0: LVDS-1: no EDID data
[ 15.772435] [drm] TV-12: set mode NTSC 480i 0
[ 15.928023] [drm] TV-12: set mode NTSC 480i 0
[ 16.088999] [drm] DAC-6: set mode 640x480 0
[ 16.272481] [drm] DAC-6: set mode 640x480 0
[ 16.431662] i2c-adapter i2c-1: unable to read EDID block.
[ 16.431674] i915 0000:00:02.0: LVDS-1: no EDID data
[ 16.477225] [drm] TV-12: set mode NTSC 480i 0
[ 16.507275] ppdev: user-space parallel port driver
[ 16.699258] [drm] TV-12: set mode NTSC 480i 0
[ 22.190195] [drm] DAC-6: set mode 640x480 0
[ 22.296316] [drm] DAC-6: set mode 640x480 0
[ 22.360918] i2c-adapter i2c-1: unable to read EDID block.
[ 22.360926] i915 0000:00:02.0: LVDS-1: no EDID data
[ 22.403203] [drm] TV-12: set mode NTSC 480i 0
[ 22.544405] [drm] TV-12: set mode NTSC 480i 0
[ 22.694327] [drm] DAC-6: set mode 640x480 0
[ 22.801167] [drm] DAC-6: set mode 640x480 0
[ 22.867047] i2c-adapter i2c-1: unable to read EDID block.
[ 22.867056] i915 0000:00:02.0: LVDS-1: no EDID data
[ 22.909389] [drm] TV-12: set mode NTSC 480i 0
[ 23.051832] [drm] TV-12: set mode NTSC 480i 0
[ 23.206522] [drm] DAC-6: set mode 640x480 0
[ 23.313302] [drm] DAC-6: set mode 640x480 0
[ 23.379190] i2c-adapter i2c-1: unable to read EDID block.
[ 23.379199] i915 0000:00:02.0: LVDS-1: no EDID data
[ 23.421519] [drm] TV-12: set mode NTSC 480i 0
[ 23.564080] [drm] TV-12: set mode NTSC 480i 0
[ 44.344656] [drm] DAC-6: set mode 640x480 0
[ 44.511713] [drm] DAC-6: set mode 640x480 0
[ 44.595284] i2c-adapter i2c-1: unable to read EDID block.
[ 44.595294] i915 0000:00:02.0: LVDS-1: no EDID data
[ 44.638365] [drm] TV-12: set mode NTSC 480i 0
[ 44.778963] [drm] TV-12: set mode NTSC 480i 0
[ 45.210411] [drm] DAC-6: set mode 640x480 0
[ 45.317533] [drm] DAC-6: set mode 640x480 0
[ 45.383701] i2c-adapter i2c-1: unable to read EDID block.
[ 45.383711] i915 0000:00:02.0: LVDS-1: no EDID data
[ 45.426032] [drm] TV-12: set mode NTSC 480i 0
[ 45.569599] [drm] TV-12: set mode NTSC 480i 0
[ 45.724641] [drm] DAC-6: set mode 640x480 0
[ 45.832047] [drm] DAC-6: set mode 640x480 0
[ 45.898257] i2c-adapter i2c-1: unable to read EDID block.
[ 45.898266] i915 0000:00:02.0: LVDS-1: no EDID data
[ 45.940577] [drm] TV-12: set mode NTSC 480i 0
[ 46.084533] [drm] TV-12: set mode NTSC 480i 0
[ 52.141109] [drm] DAC-6: set mode 640x480 0
[ 52.246661] [drm] DAC-6: set mode 640x480 0
[ 52.311453] i2c-adapter i2c-1: unable to read EDID block.
[ 52.311462] i915 0000:00:02.0: LVDS-1: no EDID data
[ 52.353808] [drm] TV-12: set mode NTSC 480i 0
[ 52.495073] [drm] TV-12: set mode NTSC 480i 0
[ 71.465291] Linking with motorhome: channel is 1
[ 71.485606] Associated successfully
[ 71.485616] Using G rates
[ 71.499279] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 71.527426] Linking with motorhome: channel is 1
[ 71.544882] Associated successfully
[ 71.544891] Using G rates
[ 71.602438] padlock: VIA PadLock not detected.
[ 82.336016] wlan0: no IPv6 routers present
[ 320.418223] PM: Syncing filesystems ... done.
[ 320.420678] PM: Preparing system for mem sleep
[ 320.420686] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 320.427587] Freezing remaining freezable tasks ... (elapsed 0.00 seconds)
done.
[ 320.427703] PM: Entering mem sleep
[ 320.427731] Suspending console(s) (use no_console_suspend to debug)
[ 320.440025] sd 1:0:0:0: [sda] Stopping disk
[ 320.949112] r8180 0000:01:00.0: PCI INT A disabled
[ 320.949123] ACPI handle has no context!
[ 320.964087] ACPI handle has no context!
[ 320.964096] ATL1E 0000:03:00.0: PME# disabled
[ 320.964104] ATL1E 0000:03:00.0: PCI INT A disabled
[ 320.964113] ACPI handle has no context!
[ 320.980147] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 320.996023] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 320.996034] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 320.996043] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 320.996052] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 320.996061] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 320.996094] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 321.035672] i915 0000:00:02.0: PCI INT A disabled
[ 321.048086] PM: suspend devices took 0.624 seconds
[ 321.048290] ehci_hcd 0000:00:1d.7: PME# disabled
[ 321.064457] ACPI: Preparing to enter system sleep state S3
[ 321.184861] Disabling non-boot CPUs ...
[ 321.184890] Back to C!
[ 321.184890] CPU0: Thermal LVT vector (0xfa) already installed
[ 321.184890] Force enabled HPET at resume
[ 321.184890] ACPI: Waking up from system sleep state S3
[ 321.436400] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1
(was 0x100006, writing 0x100002)
[ 321.436442] pcieport-driver 0000:00:1c.0: restoring config space at offset
0x7 (was 0xf0, writing 0x200000f0)
[ 321.436457] pcieport-driver 0000:00:1c.0: restoring config space at offset
0x1 (was 0x100104, writing 0x100504)
[ 321.436519] pcieport-driver 0000:00:1c.1: restoring config space at offset
0x1 (was 0x100107, writing 0x100507)
[ 321.436579] pcieport-driver 0000:00:1c.2: restoring config space at offset
0x1 (was 0x100107, writing 0x100507)
[ 321.436632] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[ 321.436665] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[ 321.436697] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[ 321.436728] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[ 321.436770] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was
0x2900006, writing 0x2900002)
[ 321.436790] ehci_hcd 0000:00:1d.7: PME# disabled
[ 321.436998] r8180 0000:01:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10a)
[ 321.437023] r8180 0000:01:00.0: restoring config space at offset 0x5 (was
0x0, writing 0xfbefc000)
[ 321.437033] r8180 0000:01:00.0: restoring config space at offset 0x4 (was
0x1, writing 0xd801)
[ 321.437042] r8180 0000:01:00.0: restoring config space at offset 0x3 (was
0x0, writing 0x4)
[ 321.437053] r8180 0000:01:00.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100007)
[ 322.858020] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 322.858029] i915 0000:00:02.0: setting latency timer to 64
[ 322.919171] [drm] LVDS-8: set mode 800x480 16
[ 322.939298] pci 0000:00:02.1: PME# disabled
[ 322.939314] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 322.939323] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 322.939360] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 322.939369] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 322.939394] usb usb2: root hub lost power or was reset
[ 322.939418] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 322.939427] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 322.939450] usb usb3: root hub lost power or was reset
[ 322.939471] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 322.939479] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 322.939503] usb usb4: root hub lost power or was reset
[ 322.939523] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 322.939532] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 322.939556] usb usb5: root hub lost power or was reset
[ 322.939576] ehci_hcd 0000:00:1d.7: PME# disabled
[ 322.939583] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 322.939592] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 322.939622] pci 0000:00:1e.0: setting latency timer to 64
[ 322.939637] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 322.939644] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 322.939675] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 322.939683] ATL1E 0000:03:00.0: setting latency timer to 64
[ 322.939694] ATL1E 0000:03:00.0: PME# disabled
[ 322.939702] ATL1E 0000:03:00.0: PME# disabled
[ 322.987306] r8180 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 323.104342] ata2.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
[ 323.104350] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 323.112263] ata2.00: configured for UDMA/66
[ 323.122491] sd 1:0:0:0: [sda] Starting disk
[ 323.232019] usb 1-8: reset high speed USB device using ehci_hcd and address 2
[ 323.506471] PM: resume devices took 2.068 seconds
[ 323.506524] PM: Finishing wakeup.
[ 323.506528] Restarting tasks ... done.
[ 323.902358] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[ 323.924197] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 323.925661] r8180: Bringing up iface
[ 324.124163] r8180: Card successfully reset
[ 324.865114] r8180: WIRELESS_MODE_G
[ 324.865117]
[ 324.990912] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 348.099855] [drm] DAC-6: set mode 640x480 0
[ 348.207471] [drm] DAC-6: set mode 640x480 0
[ 348.273783] i2c-adapter i2c-1: unable to read EDID block.
[ 348.273792] i915 0000:00:02.0: LVDS-1: no EDID data
[ 348.316196] [drm] TV-12: set mode NTSC 480i 0
[ 348.457614] [drm] TV-12: set mode NTSC 480i 0
[ 348.622732] [drm] DAC-6: set mode 640x480 0
[ 348.730804] [drm] DAC-6: set mode 640x480 0
[ 348.795597] i2c-adapter i2c-1: unable to read EDID block.
[ 348.795605] i915 0000:00:02.0: LVDS-1: no EDID data
[ 348.837971] [drm] TV-12: set mode NTSC 480i 0
[ 348.979614] [drm] TV-12: set mode NTSC 480i 0
[ 349.767074] Linking with motorhome: channel is 1
[ 349.784592] Associated successfully
[ 349.784602] Using G rates
[ 349.798238] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 349.908383] [drm] DAC-6: set mode 640x480 0
[ 349.936432] Linking with motorhome: channel is 1
[ 349.953876] Associated successfully
[ 349.953885] Using G rates
[ 350.308369] [drm] DAC-6: set mode 640x480 0
[ 350.397964] i2c-adapter i2c-1: unable to read EDID block.
[ 350.397974] i915 0000:00:02.0: LVDS-1: no EDID data
[ 350.440319] [drm] TV-12: set mode NTSC 480i 0
[ 350.583417] [drm] TV-12: set mode NTSC 480i 0
[ 351.310780] [drm] DAC-6: set mode 640x480 0
[ 351.571084] [drm] DAC-6: set mode 640x480 0
[ 351.660429] i2c-adapter i2c-1: unable to read EDID block.
[ 351.660442] i915 0000:00:02.0: LVDS-1: no EDID data
[ 351.702832] [drm] TV-12: set mode NTSC 480i 0
[ 352.027791] [drm] TV-12: set mode NTSC 480i 0
[ 353.092271] [drm] DAC-6: set mode 640x480 0
[ 353.607214] [drm] DAC-6: set mode 640x480 0
[ 353.850114] i2c-adapter i2c-1: unable to read EDID block.
[ 353.850126] i915 0000:00:02.0: LVDS-1: no EDID data
[ 353.892521] [drm] TV-12: set mode NTSC 480i 0
[ 354.168972] [drm] TV-12: set mode NTSC 480i 0
[ 359.553520] [drm] DAC-6: set mode 640x480 0
[ 359.660573] [drm] DAC-6: set mode 640x480 0
[ 359.725993] i2c-adapter i2c-1: unable to read EDID block.
[ 359.726002] i915 0000:00:02.0: LVDS-1: no EDID data
[ 359.768444] [drm] TV-12: set mode NTSC 480i 0
[ 359.923326] [drm] TV-12: set mode NTSC 480i 0
[ 360.004010] wlan0: no IPv6 routers present
[ 360.143875] [drm] DAC-6: set mode 640x480 0
[ 360.249833] [drm] DAC-6: set mode 640x480 0
[ 360.318343] i2c-adapter i2c-1: unable to read EDID block.
[ 360.318352] i915 0000:00:02.0: LVDS-1: no EDID data
[ 360.360795] [drm] TV-12: set mode NTSC 480i 0
[ 360.502640] [drm] TV-12: set mode NTSC 480i 0
[ 482.970225] [drm] DAC-6: set mode 640x480 0
[ 483.076012] [drm] DAC-6: set mode 640x480 0
[ 483.141220] i2c-adapter i2c-1: unable to read EDID block.
[ 483.141229] i915 0000:00:02.0: LVDS-1: no EDID data
[ 483.183625] [drm] TV-12: set mode NTSC 480i 0
[ 483.327132] [drm] TV-12: set mode NTSC 480i 0
[ 484.702124] [drm] DAC-6: set mode 640x480 0
[ 484.968840] [drm] DAC-6: set mode 640x480 0
[ 485.118910] i2c-adapter i2c-1: unable to read EDID block.
[ 485.118919] i915 0000:00:02.0: LVDS-1: no EDID data
[ 485.161309] [drm] TV-12: set mode NTSC 480i 0
[ 485.302820] [drm] TV-12: set mode NTSC 480i 0
[ 485.525220] [drm] DAC-6: set mode 640x480 0
[ 485.655447] [drm] DAC-6: set mode 640x480 0
[ 485.720382] i2c-adapter i2c-1: unable to read EDID block.
[ 485.720391] i915 0000:00:02.0: LVDS-1: no EDID data
[ 485.762719] [drm] TV-12: set mode NTSC 480i 0
[ 485.904409] [drm] TV-12: set mode NTSC 480i 0
[ 486.397105] [drm] DAC-6: set mode 640x480 0
[ 486.615516] [drm] DAC-6: set mode 640x480 0
[ 486.695389] i2c-adapter i2c-1: unable to read EDID block.
[ 486.695403] i915 0000:00:02.0: LVDS-1: no EDID data
[ 486.737871] [drm] TV-12: set mode NTSC 480i 0
[ 487.017158] [drm] TV-12: set mode NTSC 480i 0
[ 493.872011] [drm] DAC-6: set mode 640x480 0
[ 493.978100] [drm] DAC-6: set mode 640x480 0
[ 494.043031] i2c-adapter i2c-1: unable to read EDID block.
[ 494.043040] i915 0000:00:02.0: LVDS-1: no EDID data
[ 494.085495] [drm] TV-12: set mode NTSC 480i 0
[ 494.227070] [drm] TV-12: set mode NTSC 480i 0
[ 494.754575] [drm] DAC-6: set mode 640x480 0
[ 494.860494] [drm] DAC-6: set mode 640x480 0
[ 494.925451] i2c-adapter i2c-1: unable to read EDID block.
[ 494.925460] i915 0000:00:02.0: LVDS-1: no EDID data
[ 494.967806] [drm] TV-12: set mode NTSC 480i 0
[ 495.109427] [drm] TV-12: set mode NTSC 480i 0
[ 495.459840] [drm] DAC-6: set mode 640x480 0
[ 495.566075] [drm] DAC-6: set mode 640x480 0
[ 495.631007] i2c-adapter i2c-1: unable to read EDID block.
[ 495.631016] i915 0000:00:02.0: LVDS-1: no EDID data
[ 495.673363] [drm] TV-12: set mode NTSC 480i 0
[ 495.814885] [drm] TV-12: set mode NTSC 480i 0
[ 496.155248] [drm] DAC-6: set mode 640x480 0
[ 496.261170] [drm] DAC-6: set mode 640x480 0
[ 496.326111] i2c-adapter i2c-1: unable to read EDID block.
[ 496.326120] i915 0000:00:02.0: LVDS-1: no EDID data
[ 496.368473] [drm] TV-12: set mode NTSC 480i 0
[ 496.510196] [drm] TV-12: set mode NTSC 480i 0
[ 496.918687] [drm] DAC-6: set mode 640x480 0
[ 497.024796] [drm] DAC-6: set mode 640x480 0
[ 497.089807] i2c-adapter i2c-1: unable to read EDID block.
[ 497.089815] i915 0000:00:02.0: LVDS-1: no EDID data
[ 497.132215] [drm] TV-12: set mode NTSC 480i 0
[ 497.273984] [drm] TV-12: set mode NTSC 480i 0
[ 497.989783] [drm] DAC-6: set mode 640x480 0
[ 498.095733] [drm] DAC-6: set mode 640x480 0
[ 498.160705] i2c-adapter i2c-1: unable to read EDID block.
[ 498.160714] i915 0000:00:02.0: LVDS-1: no EDID data
[ 498.203175] [drm] TV-12: set mode NTSC 480i 0
[ 498.345128] [drm] TV-12: set mode NTSC 480i 0
[ 505.481974] [drm] DAC-6: set mode 640x480 0
[ 505.596899] [drm] DAC-6: set mode 640x480 0
[ 511.866801] i2c-adapter i2c-1: unable to read EDID block.
[ 511.866811] i915 0000:00:02.0: LVDS-1: no EDID data
[ 511.909238] [drm] TV-12: set mode NTSC 480i 0
[ 512.050745] [drm] TV-12: set mode NTSC 480i 0
[ 513.903417] [drm] DAC-6: set mode 640x480 0
[ 514.011763] [drm] DAC-6: set mode 640x480 0
[ 514.076542] i2c-adapter i2c-1: unable to read EDID block.
[ 514.076551] i915 0000:00:02.0: LVDS-1: no EDID data
[ 514.118911] [drm] TV-12: set mode NTSC 480i 0
[ 514.260342] [drm] TV-12: set mode NTSC 480i 0
[ 532.085037] [drm] DAC-6: set mode 640x480 0
[ 532.200255] [drm] DAC-6: set mode 640x480 0
[ 532.272497] i2c-adapter i2c-1: unable to read EDID block.
[ 532.272507] i915 0000:00:02.0: LVDS-1: no EDID data
[ 532.314888] [drm] TV-12: set mode NTSC 480i 0
[ 532.462666] [drm] TV-12: set mode NTSC 480i 0
[ 536.011468] [drm] DAC-6: set mode 640x480 0
[ 536.200602] [drm] DAC-6: set mode 640x480 0
[ 538.248495] i2c-adapter i2c-1: unable to read EDID block.
[ 538.248507] i915 0000:00:02.0: LVDS-1: no EDID data
[ 538.290863] [drm] TV-12: set mode NTSC 480i 0
[ 538.432717] [drm] TV-12: set mode NTSC 480i 0
[ 538.616694] [drm] DAC-6: set mode 640x480 0
[ 538.730444] [drm] DAC-6: set mode 640x480 0
[ 538.801992] i2c-adapter i2c-1: unable to read EDID block.
[ 538.802001] i915 0000:00:02.0: LVDS-1: no EDID data
[ 538.844283] [drm] TV-12: set mode NTSC 480i 0
[ 538.985675] [drm] TV-12: set mode NTSC 480i 0
gr...@grant-laptop:~$
ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be
restarted.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: grant 1413 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xf3eb8000 irq 16'
Mixer name : 'Realtek ALC269'
Components : 'HDA:10ec0269,10438330,00100004'
Controls : 13
Simple ctrls : 8
Date: Sun Feb 7 17:34:45 2010
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=UUID=4534c14f-da74-4835-8d4c-4c89b8dd69c6
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5)
MachineType: ASUSTeK Computer INC. 701SD
Package: linux-image-2.6.31-14-generic 2.6.31-14.48
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic
root=UUID=00f3f507-a13f-4441-8b24-4d99741bb705 ro quiet splash
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
RelatedPackageVersions:
linux-backports-modules-2.6.31-14-generic N/A
linux-firmware 1.24
RfKill:
0: eeepc-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
Tags: kernel-oops
Title: WARNING: at
/build/buildd/linux-2.6.31/drivers/gpu/drm/i915/i915_gem_tiling.c:517
i915_gem_set_tiling+0x1b1/0x1c0 [i915]()
Uname: Linux 2.6.31-14-generic i686
dmi.bios.date: 08/30/2008
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 0501
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: 701SD
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: x.xx
dmi.chassis.asset.tag: 0x00000000
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTek Computer INC.
dmi.chassis.version: x.x
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr0501:bd08/30/2008:svnASUSTeKComputerINC.:pn701SD:pvr0501:rvnASUSTeKComputerINC.:rn701SD:rvrx.xx:cvnASUSTekComputerINC.:ct10:cvrx.x:
dmi.product.name: 701SD
dmi.product.version: 0501
dmi.sys.vendor: ASUSTeK Computer INC.
** Affects: ubuntu
Importance: Undecided
Status: New
** Tags: apport-kerneloops i386 kernel-oops
--
WARNING: at
/build/buildd/linux-2.6.31/drivers/gpu/drm/i915/i915_gem_tiling.c:517
i915_gem_set_tiling+0x1b1/0x1c0 [i915]()
https://bugs.launchpad.net/bugs/521532
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
