Info pasted. Btw I had the same problem in Edgy also. I upgraded to see
if it went away in Feisty but it's still there. I don't remember Breezy
having this issue. But I could be mistaken.
0: Analog Devices AD1981A
1: USB Mixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 26 [84%] [-7.50dB] [on]
Front Right: Playback 26 [84%] [-7.50dB] [on]
Simple mixer control 'Master Mono',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 25 [81%] [-9.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 26 [84%] [-7.50dB] [on]
Front Right: Playback 26 [84%] [-7.50dB] [on]
Simple mixer control 'Headphone Jack Sense',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [3.00dB] [on]
Front Right: Playback 25 [81%] [3.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Line Jack Sense',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 25 [81%] [3.00dB] [on] Capture [off]
Front Right: Playback 25 [81%] [3.00dB] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch
cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [-34.50dB] [off]
Front Left: Capture [on]
Front Right: Capture [on]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Video',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch
cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [-34.50dB] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [0.00dB] [on]
Front Right: Capture 0 [0%] [0.00dB] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'External Amplifier',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
00:00.0 0600: 8086:2560 (rev 01)
Subsystem: 1028:0142
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 2.0
00:01.0 0604: 8086:2561 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: f0000000-f7ffffff
00:1d.0 0c03: 8086:24c2 (rev 01) (prog-if 00 [UHCI])
Subsystem: 1028:0142
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ff80 [size=32]
00:1d.1 0c03: 8086:24c4 (rev 01) (prog-if 00 [UHCI])
Subsystem: 1028:0142
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at ff60 [size=32]
00:1d.2 0c03: 8086:24c7 (rev 01) (prog-if 00 [UHCI])
Subsystem: 1028:0142
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ff40 [size=32]
00:1d.7 0c03: 8086:24cd (rev 01) (prog-if 20 [EHCI])
Subsystem: 1028:0142
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at fe300800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 0604: 8086:244e (rev 81) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe100000-fe2fffff
00:1f.0 0601: 8086:24c0 (rev 01)
Flags: bus master, medium devsel, latency 0
00:1f.1 0101: 8086:24cb (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: 1028:0142
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 0c05: 8086:24c3 (rev 01)
Subsystem: 1028:0142
Flags: medium devsel, IRQ 11
I/O ports at dc80 [size=32]
00:1f.5 0401: 8086:24c5 (rev 01)
Subsystem: 1028:0142
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at d800 [size=256]
I/O ports at dc40 [size=64]
Memory at fe300400 (32-bit, non-prefetchable) [size=512]
Memory at fe300000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:00.0 0300: 10de:0172 (rev a3) (prog-if 00 [VGA])
Subsystem: 10de:015a
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Memory at f4000000 (32-bit, prefetchable) [size=64M]
Memory at f3f80000 (32-bit, prefetchable) [size=512K]
[virtual] Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
02:01.0 0280: 104c:9066
Subsystem: 1385:4c00
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at fe1fe000 (32-bit, non-prefetchable) [size=8K]
Memory at fe1c0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [40] Power Management version 2
02:08.0 0200: 8086:1039 (rev 81)
Subsystem: 1028:0142
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at fe1fd000 (32-bit, non-prefetchable) [size=4K]
I/O ports at ecc0 [size=64]
Capabilities: [dc] Power Management version 2
Names of available sound cards:
I82801DBICH4
U0x46d0x8ad
[ 0.000000] Linux version 2.6.20-9-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu3)) #2 SMP Mon Feb 26 03:01:44 UTC 2007 (Ubuntu
2.6.20-9.16-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 00000000000a0000
end: 00000000000a0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000
end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 0000000027e75000
end: 0000000027f75000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 0000000027f75000 size: 0000000000002000
end: 0000000027f77000 type: 4
[ 0.000000] copy_e820_map() start: 0000000027f77000 size: 0000000000021000
end: 0000000027f98000 type: 3
[ 0.000000] copy_e820_map() start: 0000000027f98000 size: 0000000000068000
end: 0000000028000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000
end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000010000
end: 00000000fee10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000
end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000027f75000 (usable)
[ 0.000000] BIOS-e820: 0000000027f75000 - 0000000027f77000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000027f77000 - 0000000027f98000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000027f98000 - 0000000028000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 639MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe710
[ 0.000000] Entering add_active_range(0, 0, 163701) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 163701
[ 0.000000] HighMem 163701 -> 163701
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 163701
[ 0.000000] On node 0 totalpages: 163701
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1246 pages used for memmap
[ 0.000000] Normal zone: 158359 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 DELL ) @
0x000feb90
[ 0.000000] ACPI: RSDT (v001 DELL 4550 0x00000007 ASL 0x00000061) @
0x000fd4f6
[ 0.000000] ACPI: FADT (v001 DELL 4550 0x00000007 ASL 0x00000061) @
0x000fd52e
[ 0.000000] ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @
0xfffd0b8a
[ 0.000000] ACPI: MADT (v001 DELL 4550 0x00000007 ASL 0x00000061) @
0x000fd5a2
[ 0.000000] ACPI: BOOT (v001 DELL 4550 0x00000007 ASL 0x00000061) @
0x000fd60e
[ 0.000000] ACPI: ASF! (v016 DELL 4550 0x00000007 ASL 0x00000061) @
0x000fd636
[ 0.000000] ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @
0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
28000000:d6c00000)
[ 0.000000] Detected 2392.095 MHz processor.
[ 11.015966] Built 1 zonelists. Total pages: 162423
[ 11.015973] Kernel command line:
root=UUID=8caa5411-04d4-4dc3-bc20-0f1ca0021558 ro quiet splash
[ 11.016153] mapped APIC to ffffd000 (fee00000)
[ 11.016156] mapped IOAPIC to ffffc000 (fec00000)
[ 11.016161] Enabling fast FPU save and restore... done.
[ 11.016165] Enabling unmasked SIMD FPU exception support... done.
[ 11.016183] Initializing CPU#0
[ 11.016295] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 11.017962] Console: colour VGA+ 80x25
[ 11.018955] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 11.019927] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 11.037137] Memory: 637916k/654804k available (1979k kernel code, 16292k
reserved, 882k data, 324k init, 0k highmem)
[ 11.037149] virtual kernel memory layout:
[ 11.037150] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 11.037151] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 11.037152] vmalloc : 0xe8800000 - 0xff7fe000 ( 367 MB)
[ 11.037153] lowmem : 0xc0000000 - 0xe7f75000 ( 639 MB)
[ 11.037155] .init : 0xc03d1000 - 0xc0422000 ( 324 kB)
[ 11.037156] .data : 0xc02eed54 - 0xc03cb6d4 ( 882 kB)
[ 11.037157] .text : 0xc0100000 - 0xc02eed54 (1979 kB)
[ 11.037160] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 11.116286] Calibrating delay using timer specific routine.. 4788.17
BogoMIPS (lpj=9576344)
[ 11.116334] Security Framework v1.0.0 initialized
[ 11.116342] SELinux: Disabled at boot.
[ 11.116361] Mount-cache hash table entries: 512
[ 11.116527] CPU: After generic identify, caps: bfebfbff 00000000 00000000
00000000 00000400 00000000 00000000
[ 11.116542] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 11.116545] CPU: L2 cache: 512K
[ 11.116547] CPU: Hyper-Threading is disabled
[ 11.116550] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080
00000400 00000000 00000000
[ 11.116575] Checking 'hlt' instruction... OK.
[ 11.132388] SMP alternatives: switching to UP code
[ 11.132618] Freeing SMP alternatives: 11k freed
[ 11.132720] ACPI: Core revision 20060707
[ 11.162161] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
[ 11.162210] Total of 1 processors activated (4788.17 BogoMIPS).
[ 11.162353] ENABLING IO-APIC IRQs
[ 11.162561] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 11.308320] Brought up 1 CPUs
[ 11.308625] Booting paravirtualized kernel on bare hardware
[ 11.308708] Time: 22:15:52 Date: 02/07/107
[ 11.308753] NET: Registered protocol family 16
[ 11.308874] EISA bus registered
[ 11.308880] ACPI: bus type pci registered
[ 11.334881] PCI: PCI BIOS revision 2.10 entry at 0xfbe6d, last bus=2
[ 11.334884] PCI: Using configuration type 1
[ 11.334886] Setting up standard PCI resources
[ 11.368966] ACPI: Interpreter enabled
[ 11.368971] ACPI: Using IOAPIC for interrupt routing
[ 11.373549] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.373559] PCI: Probing PCI hardware (bus 00)
[ 11.373581] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 11.374009] * The chipset may have PM-Timer Bug. Due to workarounds for a
bug,
[ 11.374011] * this clock source is slow. If you are sure your timer does not
have
[ 11.374012] * this bug, please use "acpi_pm_good" to disable the workaround
[ 11.374059] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 11.374063] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[ 11.374305] Boot video device is 0000:01:00.0
[ 11.374461] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled,
disabling
[ 11.374532] PCI: Transparent bridge - 0000:00:1e.0
[ 11.374562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.415508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 11.430835] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 11.431605] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 11.432392] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 11.433151] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 11.433922] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 11.434702] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15)
*0, disabled.
[ 11.435474] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 11.436237] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 11.436414] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 11.436426] pnp: PnP ACPI init
[ 11.463930] pnp: PnP ACPI: found 10 devices
[ 11.463937] PnPBIOS: Disabled by ACPI PNP
[ 11.464001] PCI: Using ACPI for IRQ routing
[ 11.464005] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 11.477262] pnp: 00:09: ioport range 0x800-0x85f could not be reserved
[ 11.477266] pnp: 00:09: ioport range 0xc00-0xc7f has been reserved
[ 11.477269] pnp: 00:09: ioport range 0x860-0x8ff could not be reserved
[ 11.477586] PCI: Bridge: 0000:00:01.0
[ 11.477588] IO window: disabled.
[ 11.477594] MEM window: fc000000-fdffffff
[ 11.477599] PREFETCH window: f0000000-f7ffffff
[ 11.477604] PCI: Bridge: 0000:00:1e.0
[ 11.477607] IO window: e000-efff
[ 11.477613] MEM window: fe100000-fe2fffff
[ 11.477617] PREFETCH window: disabled.
[ 11.477637] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 11.477674] NET: Registered protocol family 2
[ 11.516352] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 11.516630] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 11.518009] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 11.518918] TCP: Hash tables configured (established 131072 bind 65536)
[ 11.518923] TCP reno registered
[ 11.528475] checking if image is initramfs... it is
[ 12.158769] Freeing initrd memory: 6706k freed
[ 12.159059] Simple Boot Flag at 0x7a set to 0x1
[ 12.159337] audit: initializing netlink socket (disabled)
[ 12.159358] audit(1173305753.220:1): initialized
[ 12.159543] VFS: Disk quotas dquot_6.5.1
[ 12.159568] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 12.159636] io scheduler noop registered
[ 12.159640] io scheduler anticipatory registered
[ 12.159643] io scheduler deadline registered
[ 12.159654] io scheduler cfq registered (default)
[ 12.159980] isapnp: Scanning for PnP cards...
[ 12.513981] isapnp: No Plug & Play device found
[ 12.549513] Real Time Clock Driver v1.12ac
[ 12.549576] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 12.549700] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 12.550633] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 12.550947] mice: PS/2 mouse device common for all mice
[ 12.551644] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 12.551951] input: Macintosh mouse button emulation as /class/input/input0
[ 12.551993] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 12.551998] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 12.552418] PNP: No PS/2 controller found. Probing ports directly.
[ 12.556081] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.556090] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 12.556286] EISA: Probing bus 0 at eisa.0
[ 12.556324] EISA: Detected 0 cards.
[ 12.586438] TCP cubic registered
[ 12.586450] NET: Registered protocol family 1
[ 12.586457] NET: Registered protocol family 8
[ 12.586460] NET: Registered protocol family 20
[ 12.586498] Using IPI No-Shortcut mode
[ 12.586577] ACPI: (supports S0 S1 S3 S4 S5)
[ 12.586629] Magic number: 15:559:299
[ 12.587300] Freeing unused kernel memory: 324k freed
[ 12.588071] Time: tsc clocksource has been installed.
[ 13.847594] Capability LSM initialized
[ 13.891910] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor
Device is not present [20060707]
[ 14.455548] usbcore: registered new interface driver usbfs
[ 14.455583] usbcore: registered new interface driver hub
[ 14.455611] usbcore: registered new device driver usb
[ 14.456670] USB Universal Host Controller Interface driver v3.0
[ 14.456737] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 14.456751] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 14.456755] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.456930] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 14.456958] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[ 14.457088] usb usb1: configuration #1 chosen from 1 choice
[ 14.457119] hub 1-0:1.0: USB hub found
[ 14.457130] hub 1-0:1.0: 2 ports detected
[ 14.560110] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 17
[ 14.560126] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 14.560130] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.560157] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 14.560186] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 14.560302] usb usb2: configuration #1 chosen from 1 choice
[ 14.560333] hub 2-0:1.0: USB hub found
[ 14.560344] hub 2-0:1.0: 2 ports detected
[ 14.570687] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 14.570692] e100: Copyright(c) 1999-2006 Intel Corporation
[ 14.657079] Floppy drive(s): fd0 is 1.44M
[ 14.664103] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 14.664118] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 14.664123] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.664151] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 14.664181] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 14.664293] usb usb3: configuration #1 chosen from 1 choice
[ 14.664325] hub 3-0:1.0: USB hub found
[ 14.664337] hub 3-0:1.0: 2 ports detected
[ 14.691670] FDC 0 is a post-1991 82077
[ 14.770152] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) ->
IRQ 19
[ 14.770176] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 14.770180] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 14.770245] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 4
[ 14.770297] ehci_hcd 0000:00:1d.7: debug port 1
[ 14.770304] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 14.770318] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe300800
[ 14.774216] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 14.774359] usb usb4: configuration #1 chosen from 1 choice
[ 14.774395] hub 4-0:1.0: USB hub found
[ 14.774406] hub 4-0:1.0: 6 ports detected
[ 14.799932] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 14.876131] ICH4: IDE controller at PCI slot 0000:00:1f.1
[ 14.876143] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 14.876150] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 18
[ 14.876163] ICH4: chipset revision 1
[ 14.876166] ICH4: not 100% native mode: will probe irqs later
[ 14.876178] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA,
hdb:DMA
[ 14.876195] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA,
hdd:DMA
[ 14.876207] Probing IDE interface ide0...
[ 15.164020] hda: Maxtor 6E030L0, ATA DISK drive
[ 15.443991] hdb: HDS722525VLAT80, ATA DISK drive
[ 15.500302] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 15.500664] Probing IDE interface ide1...
[ 15.915789] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 16.107779] usb 2-1: configuration #1 chosen from 1 choice
[ 16.235924] hdc: TOSHIBA DVD-ROM SD-R5112, ATAPI CD/DVD-ROM drive
[ 16.347744] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 16.521597] usb 2-2: configuration #1 chosen from 1 choice
[ 16.683860] hdd: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
[ 16.740350] ide1 at 0x170-0x177,0x376 on irq 15
[ 16.747771] SCSI subsystem initialized
[ 16.753198] libata version 2.00 loaded.
[ 16.756909] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 16.779341] usb 1-1: new low speed USB device using uhci_hcd and address 3
[ 16.779454] e100: eth0: e100_probe: addr 0xfe1fd000, irq 20, MAC addr
00:07:E9:D2:F8:EE
[ 16.787391] hda: max request size: 128KiB
[ 16.803000] hda: 60058656 sectors (30750 MB) w/2048KiB Cache,
CHS=59582/16/63, UDMA(100)
[ 16.806123] hda: cache flushes supported
[ 16.806189] hda: hda1 hda2 hda3 < hda5 >
[ 16.830233] hdb: max request size: 512KiB
[ 16.837912] hdb: 390721968 sectors (200049 MB) w/7938KiB Cache,
CHS=24321/255/63, UDMA(100)
[ 16.838249] hdb: cache flushes supported
[ 16.838284] hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 > hdb4
[ 16.902331] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache,
UDMA(33)
[ 16.902345] Uniform CD-ROM driver Revision: 3.20
[ 16.930859] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
[ 16.958183] usb 1-1: configuration #1 chosen from 1 choice
[ 16.971296] usbcore: registered new interface driver hiddev
[ 16.987510] input: HP HP USB WHEEL MOUSE as /class/input/input1
[ 16.987536] input: USB HID v1.00 Mouse [HP HP USB WHEEL MOUSE] on
usb-0000:00:1d.1-2
[ 17.001231] input: CHESEN PS2 to USB Converter as /class/input/input2
[ 17.001253] input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on
usb-0000:00:1d.0-1
[ 17.025213] input: CHESEN PS2 to USB Converter as /class/input/input3
[ 17.025257] input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on
usb-0000:00:1d.0-1
[ 17.025277] usbcore: registered new interface driver usbhid
[ 17.025282] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 17.326589] Attempting manual resume
[ 17.326594] swsusp: Resume From Partition 3:66
[ 17.326596] PM: Checking swsusp image.
[ 17.327218] PM: Resume from disk failed.
[ 17.363793] kjournald starting. Commit interval 5 seconds
[ 17.363809] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.627096] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 25.387128] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 25.389120] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.400496] Linux agpgart interface v0.101 (c) Dave Jones
[ 25.402357] agpgart: Detected an Intel 845G Chipset.
[ 25.426645] agpgart: AGP aperture is 256M @ 0xe0000000
[ 25.463553] NET: Registered protocol family 17
[ 25.994599] iTCO_vendor_support: vendor-support=0
[ 25.995868] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 25.995970] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
[ 25.996014] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 26.015994] intel_rng: Firmware space is locked read-only. If you can't or
[ 26.015996] intel_rng: don't want to disable this in firmware setup, and if
[ 26.015998] intel_rng: you are certain that your system has a functional
[ 26.016000] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 26.304042] input: PC Speaker as /class/input/input4
[ 26.592412] acx: Loaded combined PCI/USB driver, firmware_ver=default
[ 26.592417] acx: compiled to use 32bit I/O access. I/O timing issues might
occur, such as non-working firmware upload. Report them
[ 26.594057] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) ->
IRQ 21
[ 26.594083] acx: found ACX111-based wireless network card at 0000:02:01.0,
irq:21, phymem1:0xFE1FE000, phymem2:0xFE1C0000, mem1:0xe8980000,
mem1_size:8192, mem2:0xe8a80000, mem2_size:131072
[ 26.595092] acx: loading firmware for acx1111 chipset with radio ID 16
[ 26.739005] Linux video capture interface: v2.00
[ 26.805689] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5XX camera
found.(ZC3XX)
[ 27.100969] nvidia: module license 'NVIDIA' taints kernel.
[ 27.530852] parport: PnPBIOS parport detected.
[ 27.530910] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
[ 27.892580] usbcore: registered new interface driver gspca
[ 27.892586] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12
registered
[ 27.942681] usbcore: registered new interface driver snd-usb-audio
[ 28.098993] NVS_vendor_offs:01CD probe_delay:200 eof_memory:1114112
[ 28.098999] CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00
PHY:05 Temp:01
[ 28.099002] AntennaID:00 Len:02 Data:01 02
[ 28.099006] PowerLevelID:01 Len:02 Data:001E 000A
[ 28.099010] DataRatesID:02 Len:05 Data:02 04 11 22 44
[ 28.099015] DomainID:03 Len:06 Data:41 20 30 31 32 40
[ 28.099022] ProductID:04 Len:09 Data:TI ACX100
[ 28.099024] ManufacturerID:05 Len:07 Data:TI Test
[ 28.158510] acx: === chipset TNETW1130, radio type 0x16 (Radia), form factor
0x01 ((mini-)PCI / CardBus), EEPROM version 0x05: uploaded firmware 'Rev
1.2.1.34' ===
[ 28.158669] acx v0.3.36: net device wlan0, driver compiled against wireless
extensions 21 and Linux 2.6.20-9-generic
[ 28.158742] usbcore: registered new interface driver acx_usb
[ 28.158914] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 28.159297] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov
9 17:38:10 PST 2006
[ 28.160471] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) ->
IRQ 22
[ 28.160506] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 28.478472] intel8x0_measure_ac97_clock: measured 56127 usecs
[ 28.478478] intel8x0: clocking to 48000
[ 28.640307] fuse init (API version 7.8)
[ 28.657498] lp0: using parport0 (interrupt-driven).
[ 28.694665] Adding 1028152k swap on
/dev/disk/by-uuid/74fd7aca-bc92-4e3c-9041-b027c67ef75a. Priority:-1 extents:1
across:1028152k
[ 28.841615] EXT3 FS on hdb1, internal journal
[ 29.267947] NET: Registered protocol family 10
[ 29.268055] lo: Disabled Privacy Extensions
[ 29.268194] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.582347] kjournald starting. Commit interval 5 seconds
[ 30.582549] EXT3 FS on hdb4, internal journal
[ 30.582555] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.679405] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 30.722977] NTFS volume version 3.1.
[ 30.766542] NTFS volume version 3.1.
[ 30.808722] NTFS volume version 3.1.
[ 34.973326] No dock devices found.
[ 35.038156] ibm_acpi: ec object not found
[ 35.138210] input: Power Button (FF) as /class/input/input5
[ 35.151139] ACPI: Power Button (FF) [PWRF]
[ 35.193394] input: Power Button (CM) as /class/input/input6
[ 35.206207] ACPI: Power Button (CM) [VBTN]
[ 35.245713] Using specific hotkey driver
[ 37.075336] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 37.075737] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 37.075955] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 37.282727] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0]
forgot to specify physical device; fix it!
[ 37.284933] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0]
forgot to specify physical device; fix it!
[ 37.286918] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0]
forgot to specify physical device; fix it!
[ 37.781877] ppdev: user-space parallel port driver
[ 39.554870] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 39.554877] apm: overridden by ACPI.
[ 39.729283] eth0: no IPv6 routers present
[ 45.881326] Bluetooth: Core ver 2.11
[ 45.881868] NET: Registered protocol family 31
[ 45.881873] Bluetooth: HCI device and connection manager initialized
[ 45.881878] Bluetooth: HCI socket layer initialized
[ 45.948933] Bluetooth: L2CAP ver 2.8
[ 45.948938] Bluetooth: L2CAP socket layer initialized
[ 45.987035] Bluetooth: RFCOMM socket layer initialized
[ 45.987170] Bluetooth: RFCOMM TTY layer initialized
[ 45.987173] Bluetooth: RFCOMM ver 1.8
[ 59.631198] eth0: no IPv6 routers present
CPU0
0: 418963 IO-APIC-edge timer
1: 2 IO-APIC-edge i8042
6: 5 IO-APIC-edge floppy
7: 0 IO-APIC-edge parport0
8: 3 IO-APIC-edge rtc
9: 1 IO-APIC-fasteoi acpi
12: 4 IO-APIC-edge i8042
14: 52284 IO-APIC-edge ide0
15: 28686 IO-APIC-edge ide1
16: 166421 IO-APIC-fasteoi uhci_hcd:usb1, nvidia
17: 11262 IO-APIC-fasteoi uhci_hcd:usb2
18: 0 IO-APIC-fasteoi uhci_hcd:usb3
19: 4 IO-APIC-fasteoi ehci_hcd:usb4
20: 50716 IO-APIC-fasteoi eth0
21: 10754 IO-APIC-fasteoi wlan0
22: 491 IO-APIC-fasteoi Intel 82801DB-ICH4
NMI: 0
LOC: 418897
ERR: 0
MIS: 0
--
Constant tapping sound from speakers
https://launchpad.net/bugs/90417
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
