I have installed Ubuntu 9.10 on my Acer 5315 laptop.The cooling fan
doesn't start so after 10-15 min. the laptop overheats and shuts down.
Here's some info on my laptop:
------------------------------------------------------------------------
uname -r
2.6.31-16-generic
------------------------------------------------------------------------
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated
Graphics Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface
Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE
Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev
03)
05:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast
Ethernet PCI Express (rev 02)
06:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless
Network Adapter (rev 01)
------------------------------------------------------------------------
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic (bui...@rothera) (gcc version 4.4.1
(Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 (Ubuntu
2.6.31-16.53-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f4fe000 (usable)
[ 0.000000] BIOS-e820: 000000007f4fe000 - 000000007f509000 (reserved)
[ 0.000000] BIOS-e820: 000000007f509000 - 000000007f552000 (usable)
[ 0.000000] BIOS-e820: 000000007f552000 - 000000007f555000 (reserved)
[ 0.000000] BIOS-e820: 000000007f555000 - 000000007f5bb000 (usable)
[ 0.000000] BIOS-e820: 000000007f5bb000 - 000000007f5bf000 (reserved)
[ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f686000 (usable)
[ 0.000000] BIOS-e820: 000000007f686000 - 000000007f6bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6bf000 - 000000007f700000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7f686 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 4 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==>
(reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f4fe000 (usable)
[ 0.000000] modified: 000000007f4fe000 - 000000007f509000 (reserved)
[ 0.000000] modified: 000000007f509000 - 000000007f552000 (usable)
[ 0.000000] modified: 000000007f552000 - 000000007f555000 (reserved)
[ 0.000000] modified: 000000007f555000 - 000000007f5bb000 (usable)
[ 0.000000] modified: 000000007f5bb000 - 000000007f5bf000 (reserved)
[ 0.000000] modified: 000000007f5bf000 - 000000007f686000 (usable)
[ 0.000000] modified: 000000007f686000 - 000000007f6bf000 (ACPI NVS)
[ 0.000000] modified: 000000007f6bf000 - 000000007f700000 (ACPI data)
[ 0.000000] modified: 000000007f700000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 3781a000 - 37fef876
[ 0.000000] Allocated new RAMDISK: 008ad000 - 01082876
[ 0.000000] Move RAMDISK from 000000003781a000 - 0000000037fef875 to 008ad000 -
01082875
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 7f6fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 7f6fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 MSFT
01000013)
[ 0.000000] ACPI: DSDT 7f6f4000 08517 (v01 ACRSYS ACRPRDCT 00000001 MSFT
01000013)
[ 0.000000] ACPI: FACS 7f689000 00040
[ 0.000000] ACPI: APIC 7f6f3000 00068 (v02 ACRSYS ACRPRDCT 00000001 MSFT
01000013)
[ 0.000000] ACPI: MCFG 7f6f2000 0003C (v01 ACRSYS ACRPRDCT 00000001 MSFT
01000013)
[ 0.000000] ACPI: SLIC 7f6f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 MSFT
01000013)
[ 0.000000] ACPI: HPET 7f6f0000 00038 (v01 ACRSYS ACRPRDCT 00000001 MSFT
01000013)
[ 0.000000] ACPI: SSDT 7f6ef000 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.000000] ACPI: SSDT 7f6ee000 004C4 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 7f6ed000 00232 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 -
00008a80a0]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 -
0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac19c] BRK ==> [00008a9000 - 00008ac19c]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0001082876] NEW RAMDISK ==> [00008ad000 -
0001082876]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00fe1b0] fe1b0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f686
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f4fe
[ 0.000000] 0: 0x0007f509 -> 0x0007f552
[ 0.000000] 0: 0x0007f555 -> 0x0007f5bb
[ 0.000000] 0: 0x0007f5bf -> 0x0007f686
[ 0.000000] On node 0 totalpages: 521743
[ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1083000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292216 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
80000000:60000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c207d000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages:
517665
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic
root=UUID=fa426f01-e4a3-4380-be28-8cbe263e2999 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10437240 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory
cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f686)
[ 0.000000] Memory: 2042732k/2087448k available (4566k kernel code, 43372k
reserved, 2142k data, 540k init, 1178072k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.153 MHz processor.
[ 0.001505] Console: colour VGA+ 80x25
[ 0.001510] console [tty0] enabled
[ 0.001682] hpet clockevent registered
[ 0.001686] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001693] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3990.30 BogoMIPS (lpj=7980612)
[ 0.001713] Security Framework initialized
[ 0.001735] AppArmor: AppArmor initialized
[ 0.001742] Mount-cache hash table entries: 512
[ 0.001884] Initializing cgroup subsys ns
[ 0.001888] Initializing cgroup subsys cpuacct
[ 0.001892] Initializing cgroup subsys memory
[ 0.001899] Initializing cgroup subsys freezer
[ 0.001902] Initializing cgroup subsys net_cls
[ 0.001917] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001920] CPU: L2 cache: 1024K
[ 0.001924] mce: CPU supports 6 MCE banks
[ 0.001933] CPU0: Thermal monitoring enabled (TM1)
[ 0.001937] using mwait in idle threads.
[ 0.001945] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001955] ... version: 2
[ 0.001956] ... bit width: 40
[ 0.001958] ... generic counters: 2
[ 0.001960] ... value mask: 000000ffffffffff
[ 0.001962] ... max period: 000000007fffffff
[ 0.001964] ... fixed-purpose counters: 3
[ 0.001965] ... counter mask: 0000000700000003
[ 0.001970] Checking 'hlt' instruction... OK.
[ 0.016826] SMP alternatives: switching to UP code
[ 0.024007] ACPI: Core revision 20090521
[ 0.040438] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080579] CPU0: Intel(R) Celeron(R) CPU 550 @ 2.00GHz stepping 01
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (3990.30 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] Booting paravirtualized kernel on bare hardware
[ 0.084001] regulator: core version 0.5
[ 0.084001] Time: 23:36:47 Date: 02/20/10
[ 0.084001] NET: Registered protocol family 16
[ 0.084001] EISA bus registered
[ 0.084001] ACPI: bus type pci registered
[ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.084001] PCI: MCFG area at e0000000 reserved in E820
[ 0.084001] PCI: Using MMCONFIG for extended config space
[ 0.084001] PCI: Using configuration type 1 for base access
[ 0.084001] bio: create slab <bio-0> at 0
[ 0.084001] ACPI: EC: Look up EC in DSDT
[ 0.086356] ACPI: BIOS _OSI(Linux) query ignored
[ 0.088490] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.108131] ACPI: Interpreter enabled
[ 0.108136] ACPI: (supports S0 S3 S4 S5)
[ 0.108157] ACPI: Using IOAPIC for interrupt routing
[ 0.163242] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.163244] ACPI: EC: driver started in interrupt mode
[ 0.163649] ACPI: No dock devices found.
[ 0.164298] ACPI Warning: \_SB_.PCI0._OSC: Parameter count mismatch - ASL
declared 5, ACPI requires 4 20090521 nspredef-328
[ 0.164306] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.164408] pci 0000:00:02.0: reg 10 64bit mmio: [0x94000000-0x940fffff]
[ 0.164416] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
[ 0.164422] pci 0000:00:02.0: reg 20 io port: [0x5110-0x5117]
[ 0.164468] pci 0000:00:02.1: reg 10 64bit mmio: [0x000000-0x0fffff]
[ 0.164593] pci 0000:00:1a.0: reg 20 io port: [0x50c0-0x50df]
[ 0.164664] pci 0000:00:1a.1: reg 20 io port: [0x50a0-0x50bf]
[ 0.164743] pci 0000:00:1a.7: reg 10 32bit mmio: [0x98304c00-0x98304fff]
[ 0.164815] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.164820] pci 0000:00:1a.7: PME# disabled
[ 0.164880] pci 0000:00:1b.0: reg 10 64bit mmio: [0x98300000-0x98303fff]
[ 0.164948] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.164953] pci 0000:00:1b.0: PME# disabled
[ 0.165049] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.165054] pci 0000:00:1c.0: PME# disabled
[ 0.165154] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.165159] pci 0000:00:1c.1: PME# disabled
[ 0.165258] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.165263] pci 0000:00:1c.2: PME# disabled
[ 0.165363] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.165368] pci 0000:00:1c.3: PME# disabled
[ 0.165442] pci 0000:00:1d.0: reg 20 io port: [0x5080-0x509f]
[ 0.165514] pci 0000:00:1d.1: reg 20 io port: [0x5060-0x507f]
[ 0.165587] pci 0000:00:1d.2: reg 20 io port: [0x5040-0x505f]
[ 0.165665] pci 0000:00:1d.7: reg 10 32bit mmio: [0x98304800-0x98304bff]
[ 0.165735] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.165741] pci 0000:00:1d.7: PME# disabled
[ 0.165925] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
[ 0.165930] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.165936] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask
0003)
[ 0.165941] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask
0007)
[ 0.165999] pci 0000:00:1f.1: reg 10 io port: [0x5108-0x510f]
[ 0.166008] pci 0000:00:1f.1: reg 14 io port: [0x5124-0x5127]
[ 0.166016] pci 0000:00:1f.1: reg 18 io port: [0x5100-0x5107]
[ 0.166025] pci 0000:00:1f.1: reg 1c io port: [0x5120-0x5123]
[ 0.166034] pci 0000:00:1f.1: reg 20 io port: [0x50e0-0x50ef]
[ 0.166116] pci 0000:00:1f.2: reg 10 io port: [0x50f8-0x50ff]
[ 0.166124] pci 0000:00:1f.2: reg 14 io port: [0x511c-0x511f]
[ 0.166133] pci 0000:00:1f.2: reg 18 io port: [0x50f0-0x50f7]
[ 0.166142] pci 0000:00:1f.2: reg 1c io port: [0x5118-0x511b]
[ 0.166150] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f]
[ 0.166159] pci 0000:00:1f.2: reg 24 32bit mmio: [0x98304000-0x983047ff]
[ 0.166206] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.166211] pci 0000:00:1f.2: PME# disabled
[ 0.166247] pci 0000:00:1f.3: reg 10 32bit mmio: [0x98305000-0x983050ff]
[ 0.166275] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
[ 0.166370] pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
[ 0.166376] pci 0000:00:1c.0: bridge 32bit mmio: [0x97300000-0x982fffff]
[ 0.166385] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x90000000-0x90ffffff]
[ 0.166451] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.166456] pci 0000:00:1c.1: bridge 32bit mmio: [0x96300000-0x972fffff]
[ 0.166464] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x91000000-0x91ffffff]
[ 0.166675] pci 0000:05:00.0: reg 10 64bit mmio: [0x95200000-0x9520ffff]
[ 0.166895] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.166906] pci 0000:05:00.0: PME# disabled
[ 0.167012] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 0.167018] pci 0000:00:1c.2: bridge 32bit mmio: [0x95200000-0x962fffff]
[ 0.167026] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x92000000-0x92ffffff]
[ 0.167104] pci 0000:06:00.0: reg 10 64bit mmio: [0x94100000-0x9410ffff]
[ 0.167286] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
[ 0.167291] pci 0000:00:1c.3: bridge 32bit mmio: [0x94100000-0x951fffff]
[ 0.167300] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x93000000-0x93ffffff]
[ 0.167374] pci 0000:00:1e.0: transparent bridge
[ 0.167422] pci_bus 0000:00: on NUMA node 0
[ 0.167428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.167634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.167737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.167820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.167904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.175117] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.175244] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.175367] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.175490] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.175615] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0,
disabled.
[ 0.175738] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.175861] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.175987] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.176191] SCSI subsystem initialized
[ 0.176245] libata version 3.00 loaded.
[ 0.176311] usbcore: registered new interface driver usbfs
[ 0.176327] usbcore: registered new interface driver hub
[ 0.176348] usbcore: registered new device driver usb
[ 0.176514] ACPI: WMI: Mapper loaded
[ 0.176516] PCI: Using ACPI for IRQ routing
[ 0.176768] Bluetooth: Core ver 2.15
[ 0.176793] NET: Registered protocol family 31
[ 0.176795] Bluetooth: HCI device and connection manager initialized
[ 0.176797] Bluetooth: HCI socket layer initialized
[ 0.176799] NetLabel: Initializing
[ 0.176801] NetLabel: domain hash size = 128
[ 0.176802] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.176814] NetLabel: unlabeled traffic allowed by default
[ 0.176842] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.176847] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.181399] pnp: PnP ACPI init
[ 0.181421] ACPI: bus type pnp registered
[ 0.182538] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13
(0x1000-0x1fff), disabling
[ 0.204249] pnp: PnP ACPI: found 9 devices
[ 0.204251] ACPI: ACPI bus type pnp unregistered
[ 0.204255] PnPBIOS: Disabled by ACPI PNP
[ 0.204268] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.204271] system 00:01: ioport range 0x610-0x610 has been reserved
[ 0.204274] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.204277] system 00:01: ioport range 0x810-0x817 has been reserved
[ 0.204279] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.204282] system 00:01: ioport range 0x500-0x53f has been reserved
[ 0.204285] system 00:01: ioport range 0xff2c-0xff2f has been reserved
[ 0.204289] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.204292] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.204295] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.204298] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.204300] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.204303] system 00:01: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.204306] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.204309] system 00:01: iomem range 0x32000000-0x320000ff could not be
reserved
[ 0.238973] AppArmor: AppArmor Filesystem Enabled
[ 0.239046] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.239050] pci 0000:00:1c.0: IO window: 0x4000-0x4fff
[ 0.239058] pci 0000:00:1c.0: MEM window: 0x97300000-0x982fffff
[ 0.239063] pci 0000:00:1c.0: PREFETCH window: 0x00000090000000-0x00000090ffffff
[ 0.239072] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.239075] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.239082] pci 0000:00:1c.1: MEM window: 0x96300000-0x972fffff
[ 0.239087] pci 0000:00:1c.1: PREFETCH window: 0x00000091000000-0x00000091ffffff
[ 0.239096] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[ 0.239099] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.239106] pci 0000:00:1c.2: MEM window: 0x95200000-0x962fffff
[ 0.239111] pci 0000:00:1c.2: PREFETCH window: 0x00000092000000-0x00000092ffffff
[ 0.239120] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[ 0.239124] pci 0000:00:1c.3: IO window: 0x1000-0x1fff
[ 0.239131] pci 0000:00:1c.3: MEM window: 0x94100000-0x951fffff
[ 0.239136] pci 0000:00:1c.3: PREFETCH window: 0x00000093000000-0x00000093ffffff
[ 0.239144] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 0.239146] pci 0000:00:1e.0: IO window: disabled
[ 0.239152] pci 0000:00:1e.0: MEM window: disabled
[ 0.239157] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.239173] alloc irq_desc for 17 on node -1
[ 0.239175] alloc kstat_irqs on node -1
[ 0.239181] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.239187] pci 0000:00:1c.0: setting latency timer to 64
[ 0.239196] alloc irq_desc for 16 on node -1
[ 0.239198] alloc kstat_irqs on node -1
[ 0.239201] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.239206] pci 0000:00:1c.1: setting latency timer to 64
[ 0.239215] alloc irq_desc for 18 on node -1
[ 0.239216] alloc kstat_irqs on node -1
[ 0.239220] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.239225] pci 0000:00:1c.2: setting latency timer to 64
[ 0.239234] alloc irq_desc for 19 on node -1
[ 0.239235] alloc kstat_irqs on node -1
[ 0.239238] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.239243] pci 0000:00:1c.3: setting latency timer to 64
[ 0.239252] pci 0000:00:1e.0: setting latency timer to 64
[ 0.239257] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.239259] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.239262] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
[ 0.239264] pci_bus 0000:02: resource 1 mem: [0x97300000-0x982fffff]
[ 0.239267] pci_bus 0000:02: resource 2 pref mem [0x90000000-0x90ffffff]
[ 0.239269] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
[ 0.239271] pci_bus 0000:04: resource 1 mem: [0x96300000-0x972fffff]
[ 0.239274] pci_bus 0000:04: resource 2 pref mem [0x91000000-0x91ffffff]
[ 0.239276] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff]
[ 0.239278] pci_bus 0000:05: resource 1 mem: [0x95200000-0x962fffff]
[ 0.239281] pci_bus 0000:05: resource 2 pref mem [0x92000000-0x92ffffff]
[ 0.239283] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff]
[ 0.239286] pci_bus 0000:06: resource 1 mem: [0x94100000-0x951fffff]
[ 0.239288] pci_bus 0000:06: resource 2 pref mem [0x93000000-0x93ffffff]
[ 0.239290] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 0.239293] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
[ 0.239326] NET: Registered protocol family 2
[ 0.239411] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.239696] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.240240] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.240589] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.240592] TCP reno registered
[ 0.240707] NET: Registered protocol family 1
[ 0.240780] Trying to unpack rootfs image as initramfs...
[ 0.441148] Freeing initrd memory: 8022k freed
[ 0.446505] cpufreq-nforce2: No nForce2 chipset.
[ 0.446534] Scanning for low memory corruption every 60 seconds
[ 0.446635] audit: initializing netlink socket (disabled)
[ 0.446655] type=2000 audit(1266709007.443:1): initialized
[ 0.455471] highmem bounce pool size: 64 pages
[ 0.455477] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.456714] VFS: Disk quotas dquot_6.5.2
[ 0.456766] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.457244] fuse init (API version 7.12)
[ 0.457317] msgmni has been set to 1706
[ 0.457482] alg: No test for stdrng (krng)
[ 0.457493] io scheduler noop registered
[ 0.457495] io scheduler anticipatory registered
[ 0.457497] io scheduler deadline registered
[ 0.457536] io scheduler cfq registered (default)
[ 0.457549] pci 0000:00:02.0: Boot video device
[ 0.458012] alloc irq_desc for 24 on node -1
[ 0.458014] alloc kstat_irqs on node -1
[ 0.458027] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.458039] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.458201] alloc irq_desc for 25 on node -1
[ 0.458203] alloc kstat_irqs on node -1
[ 0.458212] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.458224] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.458381] alloc irq_desc for 26 on node -1
[ 0.458383] alloc kstat_irqs on node -1
[ 0.458392] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.458404] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.458568] alloc irq_desc for 27 on node -1
[ 0.458570] alloc kstat_irqs on node -1
[ 0.458579] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.458590] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.458814] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.458827] Firmware did not grant requested _OSC control
[ 0.458846] Firmware did not grant requested _OSC control
[ 0.458858] Firmware did not grant requested _OSC control
[ 0.459065] Firmware did not grant requested _OSC control
[ 0.459093] Firmware did not grant requested _OSC control
[ 0.459105] Firmware did not grant requested _OSC control
[ 0.459118] Firmware did not grant requested _OSC control
[ 0.459130] Firmware did not grant requested _OSC control
[ 0.459145] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.464765] ACPI: AC Adapter [AC] (on-line)
[ 0.464829] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.464832] ACPI: Power Button [PWRF]
[ 0.464883] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0C:00/input/input1
[ 0.464885] ACPI: Power Button [PWRB]
[ 0.464922] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0D:00/input/input2
[ 0.464966] ACPI: Lid Switch [LID0]
[ 0.465007] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0E:00/input/input3
[ 0.465010] ACPI: Sleep Button [SLPB]
[ 0.465967] Monitor-Mwait will be used to enter C-1 state
[ 0.466007] Monitor-Mwait will be used to enter C-2 state
[ 0.466025] Monitor-Mwait will be used to enter C-3 state
[ 0.466032] Marking TSC unstable due to TSC halts in idle
[ 0.466065] Switched to high resolution mode on CPU 0
[ 0.466078] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.466101] processor LNXCPU:00: registered as cooling_device0
[ 0.466105] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.506705] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.506713] ACPI: Thermal Zone [TZ01] (40 C)
[ 0.506758] isapnp: Scanning for PnP cards...
[ 0.861135] isapnp: No Plug & Play device found
[ 1.132094] ACPI: Battery Slot [BAT0] (battery present)
[ 1.132226] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.133360] brd: module loaded
[ 1.133733] loop: module loaded
[ 1.133798] input: Macintosh mouse button emulation as
/devices/virtual/input/input4
[ 1.133867] ahci 0000:00:1f.2: version 3.0
[ 1.133884] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.133924] alloc irq_desc for 28 on node -1
[ 1.133927] alloc kstat_irqs on node -1
[ 1.133939] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.134017] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x3 impl
SATA mode
[ 1.134021] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
ems
[ 1.134026] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.140081] scsi0 : ahci
[ 1.140181] scsi1 : ahci
[ 1.140226] scsi2 : ahci
[ 1.140343] ata1: SATA max UDMA/133 abar m2...@0x98304000 port 0x98304100 irq 28
[ 1.140347] ata2: SATA max UDMA/133 abar m2...@0x98304000 port 0x98304180 irq 28
[ 1.140349] ata3: DUMMY
[ 1.140398] ata_piix 0000:00:1f.1: version 2.13
[ 1.140408] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.140448] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.140537] scsi3 : ata_piix
[ 1.140606] scsi4 : ata_piix
[ 1.141156] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50e0 irq 14
[ 1.141160] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50e8 irq 15
[ 1.141865] Fixed MDIO Bus: probed
[ 1.141897] PPP generic driver version 2.4.2
[ 1.141993] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.142012] alloc irq_desc for 21 on node -1
[ 1.142014] alloc kstat_irqs on node -1
[ 1.142020] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 1.142037] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.142040] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.142086] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.146009] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.146016] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.146231] ehci_hcd 0000:00:1a.7: irq 21, io mem 0x98304c00
[ 1.160018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.160088] usb usb1: configuration #1 chosen from 1 choice
[ 1.160115] hub 1-0:1.0: USB hub found
[ 1.160123] hub 1-0:1.0: 4 ports detected
[ 1.160178] alloc irq_desc for 23 on node -1
[ 1.160180] alloc kstat_irqs on node -1
[ 1.160185] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.160196] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.160200] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.160228] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.164137] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.164144] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.164158] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x98304800
[ 1.180014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.180068] usb usb2: configuration #1 chosen from 1 choice
[ 1.180094] hub 2-0:1.0: USB hub found
[ 1.180100] hub 2-0:1.0: 6 ports detected
[ 1.180154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.180172] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.180201] alloc irq_desc for 20 on node -1
[ 1.180203] alloc kstat_irqs on node -1
[ 1.180209] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.180216] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.180220] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.180250] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.180287] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050c0
[ 1.180361] usb usb3: configuration #1 chosen from 1 choice
[ 1.180384] hub 3-0:1.0: USB hub found
[ 1.180390] hub 3-0:1.0: 2 ports detected
[ 1.180432] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.180439] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.180443] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.180472] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.180501] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050a0
[ 1.180577] usb usb4: configuration #1 chosen from 1 choice
[ 1.180599] hub 4-0:1.0: USB hub found
[ 1.180605] hub 4-0:1.0: 2 ports detected
[ 1.180647] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.180656] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.180659] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.180683] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.180713] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
[ 1.180782] usb usb5: configuration #1 chosen from 1 choice
[ 1.180805] hub 5-0:1.0: USB hub found
[ 1.180811] hub 5-0:1.0: 2 ports detected
[ 1.180851] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.180857] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.180861] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.180888] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.180926] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
[ 1.180994] usb usb6: configuration #1 chosen from 1 choice
[ 1.181020] hub 6-0:1.0: USB hub found
[ 1.181026] hub 6-0:1.0: 2 ports detected
[ 1.181066] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 1.181075] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.181079] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.181106] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.181134] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005040
[ 1.181202] usb usb7: configuration #1 chosen from 1 choice
[ 1.181225] hub 7-0:1.0: USB hub found
[ 1.181232] hub 7-0:1.0: 2 ports detected
[ 1.181317] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq
1,12
[ 1.217935] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.217940] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.217995] mice: PS/2 mouse device common for all mice
[ 1.218112] rtc_cmos 00:03: RTC can wake from S4
[ 1.218141] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.218173] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.218268] device-mapper: uevent: version 1.0.3
[ 1.218350] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
[email protected]
[ 1.219982] device-mapper: multipath: version 1.1.0 loaded
[ 1.219985] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.220100] EISA: Probing bus 0 at eisa.0
[ 1.220107] Cannot allocate resource for EISA slot 1
[ 1.220109] Cannot allocate resource for EISA slot 2
[ 1.220111] Cannot allocate resource for EISA slot 3
[ 1.220113] Cannot allocate resource for EISA slot 4
[ 1.220115] Cannot allocate resource for EISA slot 5
[ 1.220129] EISA: Detected 0 cards.
[ 1.220203] cpuidle: using governor ladder
[ 1.220370] cpuidle: using governor menu
[ 1.220770] TCP cubic registered
[ 1.220900] NET: Registered protocol family 10
[ 1.221258] lo: Disabled Privacy Extensions
[ 1.221499] NET: Registered protocol family 17
[ 1.221516] Bluetooth: L2CAP ver 2.13
[ 1.221517] Bluetooth: L2CAP socket layer initialized
[ 1.221520] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.221521] Bluetooth: SCO socket layer initialized
[ 1.221559] Bluetooth: RFCOMM TTY layer initialized
[ 1.221562] Bluetooth: RFCOMM socket layer initialized
[ 1.221563] Bluetooth: RFCOMM ver 1.11
[ 1.221592] Using IPI No-Shortcut mode
[ 1.221655] PM: Resume from disk failed.
[ 1.221666] registered taskstats version 1
[ 1.221767] Magic number: 14:499:656
[ 1.221858] rtc_cmos 00:03: setting system clock to 2010-02-20 23:36:48 UTC
(1266709008)
[ 1.221861] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.221863] EDD information not available.
[ 1.248312] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[ 1.315648] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
[ 1.328312] ata4.00: configured for UDMA/33
[ 1.460061] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.460088] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.460706] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.500023] Clocksource tsc unstable (delta = -213141998 ns)
[ 1.513828] ata1.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
[ 1.513831] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.514749] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.514912] ata1.00: configured for UDMA/133
[ 1.528156] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5
[ 1.528275] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.528310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111
GiB)
[ 1.528350] sd 0:0:0:0: [sda] Write Protect is off
[ 1.528353] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.528373] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.528485] sda: sda1 sda2 sda3
[ 1.532070] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WP03 PQ: 0 ANSI: 5
[ 1.543021] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 1.543025] Uniform CD-ROM driver Revision: 3.20
[ 1.543100] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.543137] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.545145] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.545159] Freeing unused kernel memory: 540k freed
[ 1.545428] Write protecting the kernel text: 4568k
[ 1.545455] Write protecting the kernel read-only data: 1836k
[ 1.704691] Linux agpgart interface v0.103
[ 1.707428] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 1.707655] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 1.711023] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 1.833447] [drm] Initialized drm 1.1.0 20060810
[ 1.847023] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.847029] i915 0000:00:02.0: setting latency timer to 64
[ 1.849033] alloc irq_desc for 29 on node -1
[ 1.849036] alloc kstat_irqs on node -1
[ 1.849047] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 1.955453] tg3.c:v3.99 (April 20, 2009)
[ 1.955514] tg3 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.955530] tg3 0000:05:00.0: setting latency timer to 64
[ 1.960093] tg3 0000:05:00.0: PME# disabled
[ 2.366931] [drm] TV-14: set mode NTSC 480i 0
[ 2.495618] [drm] fb0: inteldrmfb frame buffer device
[ 2.713192] acpi device:3c: registered as cooling_device1
[ 2.713428] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/input/input6
[ 2.713466] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 2.713487] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.784887] [drm] LVDS-8: set mode 1280x800 17
[ 2.808854] Console: switching to colour frame buffer device 160x50
[ 2.882351] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address
00:1b:38:d3:b5:76
[ 2.882354] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 2.882357] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.882359] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.018532] xor: automatically using best checksumming function: pIII_sse
[ 3.036008] pIII_sse : 6885.000 MB/sec
[ 3.036010] xor: using function: pIII_sse (6885.000 MB/sec)
[ 3.038722] device-mapper: dm-raid45: initialized v0.2594b
[ 3.238776] PM: Starting manual resume from disk
[ 3.238780] PM: Resume from partition 8:2
[ 3.238782] PM: Checking hibernation image.
[ 3.238983] PM: Resume from disk failed.
[ 3.242320] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.242324] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.269946] EXT4-fs (sda1): barriers enabled
[ 3.944205] kjournald2 starting: pid 385, dev sda1:8, commit interval 5 seconds
[ 3.944225] EXT4-fs (sda1): delayed allocation enabled
[ 3.944229] EXT4-fs: file extents enabled
[ 3.945665] EXT4-fs: mballoc enabled
[ 3.945679] EXT4-fs (sda1): recovery complete
[ 3.946122] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 14.830240] udev: starting version 147
[ 14.850895] Adding 4192956k swap on /dev/sda2. Priority:-1 extents:1
across:4192956k
[ 14.894612] lp: driver loaded but no devices found
[ 15.109462] EXT4-fs (sda1): internal journal on sda1:8
[ 15.255836] cfg80211: Calling CRDA to update world regulatory domain
[ 15.320854] cfg80211: World regulatory domain updated:
[ 15.320857] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.320860] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.320863] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.320865] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.320867] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.320870] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.332771] ath5k 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 15.332787] ath5k 0000:06:00.0: setting latency timer to 64
[ 15.332828] ath5k 0000:06:00.0: registered as 'phy0'
[ 15.387374] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 15.421844] acer-wmi: Brightness must be controlled by generic video driver
[ 15.460109] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.631191] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.631232] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.635278] ath: EEPROM regdomain: 0x65
[ 15.635282] ath: EEPROM indicates we should expect a direct regpair map
[ 15.635285] ath: Country alpha2 being used: 00
[ 15.635287] ath: Regpair used: 0x65
[ 15.646694] phy0: Selected rate control algorithm 'minstrel'
[ 15.647295] Registered led device: ath5k-phy0::rx
[ 15.647310] Registered led device: ath5k-phy0::tx
[ 15.647313] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 15.705227] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 16.096111] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[ 16.129269] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio1/input/input9
[ 17.956326] kjournald starting. Commit interval 5 seconds
[ 17.956635] EXT3 FS on sda3, internal journal
[ 17.956640] EXT3-fs: mounted filesystem with writeback data mode.
[ 18.186920] tg3 0000:05:00.0: PME# disabled
[ 18.187142] alloc irq_desc for 30 on node -1
[ 18.187144] alloc kstat_irqs on node -1
[ 18.187174] tg3 0000:05:00.0: irq 30 for MSI/MSI-X
[ 18.324508] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.422125] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.220774] [drm] TV-14: set mode NTSC 480i 0
[ 19.492545] [drm] TV-14: set mode NTSC 480i 0
[ 19.855623] [drm] TV-14: set mode NTSC 480i 0
[ 20.061900] [drm] TV-14: set mode NTSC 480i 0
[ 20.301655] ppdev: user-space parallel port driver
[ 26.142860] [drm] TV-14: set mode NTSC 480i 0
[ 26.285406] [drm] TV-14: set mode NTSC 480i 0
[ 26.746752] [drm] TV-14: set mode NTSC 480i 0
[ 26.890062] [drm] TV-14: set mode NTSC 480i 0
[ 46.502866] wlan0: authenticate with AP 00:18:f8:cc:b1:c4
[ 46.513885] wlan0: authenticated
[ 46.513890] wlan0: associate with AP 00:18:f8:cc:b1:c4
[ 46.516240] wlan0: RX AssocResp from 00:18:f8:cc:b1:c4 (capab=0x411 status=0
aid=1)
[ 46.516243] wlan0: associated
[ 46.516922] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 46.580030] padlock: VIA PadLock not detected.
[ 57.452042] wlan0: no IPv6 routers present
[ 191.387431] ath5k phy0: unsupported jumbo
---------------------------------------------------------------------------------
If you need more info please ask!
Best regards
PereUbu
--
Laptop Acer Aspire 5315 under ubuntu 8.10 overheats and switched off. Help
please =)
https://bugs.launchpad.net/bugs/407780
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
