While almost none of them work, most of the USB devices are plugged in, but I try to plug in a USB headset and my system becomes very unstable.
This was not an issue with Ubuntu 9.04. 2.6.31-20-generic lspci 00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1) 00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1) 00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2) 00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1) 00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1) 00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1) 00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1) 00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1) 00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1) 00:09.0 RAID bus controller: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (RAID mode) (rev a2) 00:0a.0 Ethernet controller: nVidia Corporation MCP77 Ethernet (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1) 00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1) 00:13.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1) 00:14.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:05.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 70) 02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200] (rev a2) 03:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GT] (rev a2) 06:00.0 Communication controller: Conexant Systems, Inc. Device 2f82 lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 03f0:2b11 Hewlett-Packard PSC 2170 series Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 046d:08c1 Logitech, Inc. QuickCam Fusion Bus 002 Device 003: ID 058f:6377 Alcor Micro Corp. Multimedia Card Reader Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub After plugging Logitech USB headset: lsusb Bus 003 Device 002: ID 046d:0a01 Logitech, Inc. USB Headset Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 03f0:2b11 Hewlett-Packard PSC 2170 series Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 046d:08c1 Logitech, Inc. QuickCam Fusion Bus 002 Device 003: ID 058f:6377 Alcor Micro Corp. Multimedia Card Reader Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg [11847.837695] usb 3-4: new full speed USB device using ohci_hcd and address 2 [11848.311592] usb 3-4: configuration #1 chosen from 1 choice [11848.564610] usbcore: registered new interface driver hiddev [11848.578512] input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.3/input/input7 [11848.578655] generic-usb 0003:046D:0A01.0001: input,hidraw0: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:02.0-4/input3 [11848.578689] usbcore: registered new interface driver usbhid [11848.578695] usbhid: v2.6:USB HID core driver [11854.880170] ALSA usbaudio.c:928: timeout: still 3 active urbs.. [11860.881527] ALSA usbaudio.c:928: timeout: still 8 active urbs.. Unplug and replugin: 11854.880170] ALSA usbaudio.c:928: timeout: still 3 active urbs.. [11860.881527] ALSA usbaudio.c:928: timeout: still 8 active urbs.. [11974.133794] usb 3-4: USB disconnect, address 2 lsusb <No output> ^C^C^C^C^C^C^CZ^Z^Z^Z^Z^Z^Z^Z^Z <getting nowhere> [ 600.720725] [<c01e6055>] nameidata_to_filp+0x55/0x70 [ 600.720732] [<c0210170>] ? blkdev_open+0x0/0xb0 [ 600.720740] [<c01f3daa>] do_filp_open+0x53a/0x890 [ 600.720750] [<c01deeea>] ? __free_slab+0x8a/0x100 [ 600.720758] [<c01f0b25>] ? getname+0x25/0xf0 [ 600.720766] [<c01e5b90>] do_sys_open+0x50/0x150 [ 600.720775] [<c01652f1>] ? do_gettimeofday+0x11/0x40 [ 600.720783] [<c01e5cf9>] sys_open+0x29/0x40 [ 600.720789] [<c01033ac>] syscall_call+0x7/0xb [ 600.720820] INFO: task devkit-disks-da:2181 blocked for more than 120 seconds. [ 600.720827] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 600.720832] devkit-disks- D c08185c0 0 2181 2176 0x00000000 [ 600.720842] ec955bb0 00000082 f6678000 c08185c0 f65b4df8 c08185c0 4e5a3675 0000001d [ 600.720855] c08185c0 c08185c0 f65b4df8 c08185c0 00000003 0000001d c08185c0 ebacac40 [ 600.720869] f65b4b60 ec955c60 7fffffff ec955c64 ec955c0c c05727f5 f6accc00 f35d04b8 [ 600.720882] Call Trace: [ 600.720890] [<c05727f5>] schedule_timeout+0x185/0x200 [ 600.720899] [<c0315ebd>] ? kobject_put+0x1d/0x50 [ 600.720908] [<c03b6818>] ? scsi_dispatch_cmd+0x158/0x260 [ 600.720916] [<c030b17e>] ? blk_add_timer+0x6e/0xc0 [ 600.720924] [<c0573f23>] ? _spin_lock_irq+0x13/0x20 [ 600.720932] [<c03bc8cd>] ? scsi_request_fn+0xbd/0x4b0 [ 600.720939] [<c0572512>] wait_for_common+0xa2/0x120 [ 600.720947] [<c013c4c0>] ? default_wake_function+0x0/0x10 [ 600.720955] [<c0572622>] wait_for_completion+0x12/0x20 [ 600.720963] [<c030a455>] blk_execute_rq+0x75/0xd0 [ 600.720971] [<c030a310>] ? blk_end_sync_rq+0x0/0x30 [ 600.720979] [<c0306f7d>] ? get_request_wait+0x1d/0x160 [ 600.720988] [<c03074bb>] ? blk_get_request+0x5b/0x80 [ 600.720996] [<c03bdd62>] scsi_execute+0xb2/0x140 [ 600.721003] [<c03bdf95>] scsi_execute_req+0x85/0x140 [ 600.721011] [<c03c6390>] sd_spinup_disk+0x80/0x4f0 [ 600.721018] [<c03c8c17>] ? sd_revalidate_disk+0x67/0x2b0 [ 600.721027] [<c03c8c42>] sd_revalidate_disk+0x92/0x2b0 [ 600.721036] [<c01fa8b0>] ? iput+0x20/0x60 [ 600.721045] [<c02337b0>] rescan_partitions+0x80/0x330 [ 600.721053] [<c0316022>] ? kobject_get+0x12/0x20 [ 600.721062] [<c03c628f>] ? sd_open+0x12f/0x1b0 [ 600.721069] [<c020ff90>] __blkdev_get+0x140/0x310 [ 600.721077] [<c021016a>] blkdev_get+0xa/0x10 [ 600.721084] [<c02101ce>] blkdev_open+0x5e/0xb0 [ 600.721091] [<c01e5df9>] __dentry_open+0xb9/0x230 [ 600.721099] [<c01e6055>] nameidata_to_filp+0x55/0x70 [ 600.721106] [<c0210170>] ? blkdev_open+0x0/0xb0 [ 600.721113] [<c01f3daa>] do_filp_open+0x53a/0x890 [ 600.721122] [<c03b6060>] ? scsi_device_put+0x30/0x50 [ 600.721130] [<c03c54f5>] ? scsi_disk_put+0x35/0x40 [ 600.721139] [<c01fa8b0>] ? iput+0x20/0x60 [ 600.721147] [<c01e5b90>] do_sys_open+0x50/0x150 [ 600.721156] [<c01652f1>] ? do_gettimeofday+0x11/0x40 [ 600.721163] [<c01e5cf9>] sys_open+0x29/0x40 [ 600.721171] [<c01033ac>] syscall_call+0x7/0xb [ 720.720247] INFO: task scsi_eh_7:433 blocked for more than 120 seconds. [ 720.720254] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 720.720260] scsi_eh_7 D c08185c0 0 433 2 0x00000000 [ 720.720269] f6645e60 00000046 00000001 c08185c0 f675cdf8 c08185c0 82444f75 00000024 [ 720.720281] c08185c0 c08185c0 f675cdf8 c08185c0 82441cc6 00000024 c08185c0 ec8ee540 [ 720.720292] f675cb60 f6a81b30 7fffffff f6a81b34 f6645ebc c05727f5 f6645e8c b3ac2bc0 [ 720.720306] Call Trace: [ 720.720320] [<c05727f5>] schedule_timeout+0x185/0x200 [ 720.720330] [<c0127b68>] ? default_spin_lock_flags+0x8/0x10 [ 720.720340] [<c0315ebd>] ? kobject_put+0x1d/0x50 [ 720.720346] [<c0572512>] wait_for_common+0xa2/0x120 [ 720.720356] [<c013c4c0>] ? default_wake_function+0x0/0x10 [ 720.720362] [<c0572622>] wait_for_completion+0x12/0x20 [ 720.720392] [<f80f38c8>] command_abort+0x78/0xa0 [usb_storage] [ 720.720400] [<c03ba8aa>] scsi_eh_abort_cmds+0xca/0x170 [ 720.720407] [<c0127b68>] ? default_spin_lock_flags+0x8/0x10 [ 720.720414] [<c03bb621>] scsi_unjam_host+0x91/0x1e0 [ 720.720419] [<c057209c>] ? schedule+0x40c/0x730 [ 720.720428] [<c03bb770>] ? scsi_error_handler+0x0/0x130 [ 720.720434] [<c03bb84f>] scsi_error_handler+0xdf/0x130 [ 720.720442] [<c015be8c>] kthread+0x7c/0x90 [ 720.720448] [<c015be10>] ? kthread+0x0/0x90 [ 720.720454] [<c0104047>] kernel_thread_helper+0x7/0x10 -- [Karmic] USB device not recognized or automounted at boot-up https://bugs.launchpad.net/bugs/445160 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
