Dear Sir
Thanks for your response. I have attached the information that you requested
below. It is only Suspend that will not work, not Suspend and Hibernate as I
stated in my bug report. My apologies for this. I would also like to add that
I am sharing the same Logical Volume for the Ubuntu installation with Open Suse
and am have a Broadcom 4319 chipset for the wireless card. Not sure if this
affects the suspend function in any way? Thanks again for your attention to
the matter.
Regards
Preeth Parthasarathy.
uname -a: -
Linux preetha 2.6.20-10-generic #2 SMP Sun Mar 11 19:49:03 UTC 2007
x86_64 GNU/Linux
dmesg: -
(lpj=8764137)
[ 33.591749] Security Framework v1.0.0 initialized
[ 33.591756] SELinux: Disabled at boot.
[ 33.591782] Mount-cache hash table entries: 256
[ 33.591955] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 33.591958] CPU: L2 Cache: 1024K (64 bytes/line)
[ 33.591961] CPU 0/0 -> Node 0
[ 33.591982] SMP alternatives: switching to UP code
[ 33.592335] Freeing SMP alternatives: 28k freed
[ 33.592448] Early unpacking initramfs... done
[ 33.888778] ACPI: Core revision 20060707
[ 33.889011] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 34.570026] Using local APIC timer interrupts.
[ 34.615634] result 12436723
[ 34.615636] Detected 12.436 MHz APIC timer.
[ 34.617947] Brought up 1 CPUs
[ 34.617989] testing NMI watchdog ... OK.
[ 34.657964] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 34.657966] time.c: Detected 2188.863 MHz processor.
[ 34.658270] Time: 13:45:11 Date: 02/15/107
[ 34.658309] NET: Registered protocol family 16
[ 34.658394] ACPI: bus type pci registered
[ 34.658402] PCI: Using configuration type 1
[ 34.660305] ACPI: Interpreter enabled
[ 34.660307] ACPI: Using IOAPIC for interrupt routing
[ 34.660735] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 34.660739] PCI: Probing PCI hardware (bus 00)
[ 34.662341] Boot video device is 0000:01:05.0
[ 34.662980] PCI: Transparent bridge - 0000:00:14.4
[ 34.663075] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 34.665007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 34.665817] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 34.666011] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 34.666206] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 34.666397] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 34.666589] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 34.666779] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 34.666970] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 34.667160] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 34.705848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 34.706086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 34.706506] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 34.706517] pnp: PnP ACPI init
[ 34.733749] pnp: PnP ACPI: found 10 devices
[ 34.733796] PCI: Using ACPI for IRQ routing
[ 34.733799] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 34.733806] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 34.733808] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 34.734079] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 34.734082] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[ 34.734084] pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 34.734087] pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 34.734089] pnp: 00:08: ioport range 0x870-0x87f has been reserved
[ 34.734316] PCI: Bridge: 0000:00:01.0
[ 34.734319] IO window: 9000-9fff
[ 34.734322] MEM window: c0100000-c01fffff
[ 34.734325] PREFETCH window: c8000000-cfffffff
[ 34.734327] PCI: Bridge: 0000:00:05.0
[ 34.734328] IO window: disabled.
[ 34.734331] MEM window: disabled.
[ 34.734332] PREFETCH window: disabled.
[ 34.734338] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[ 34.734340] IO window: 0000a400-0000a4ff
[ 34.734345] IO window: 0000a800-0000a8ff
[ 34.734351] PREFETCH window: 88000000-8bffffff
[ 34.734356] MEM window: 8c000000-8fffffff
[ 34.734361] PCI: Bridge: 0000:00:14.4
[ 34.734364] IO window: a000-afff
[ 34.734371] MEM window: c0200000-c02fffff
[ 34.734376] PREFETCH window: 88000000-8bffffff
[ 34.734393] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 34.734418] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 34.734490] NET: Registered protocol family 2
[ 34.769714] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 34.770330] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 34.774861] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 34.775992] TCP: Hash tables configured (established 262144 bind 65536)
[ 34.775995] TCP reno registered
[ 34.785750] checking if image is initramfs... it is
[ 35.348695] Freeing initrd memory: 7500k freed
[ 35.357493] audit: initializing netlink socket (disabled)
[ 35.357507] audit(1173966310.220:1): initialized
[ 35.357652] VFS: Disk quotas dquot_6.5.1
[ 35.357669] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 35.357716] io scheduler noop registered
[ 35.357718] io scheduler anticipatory registered
[ 35.357720] io scheduler deadline registered
[ 35.357731] io scheduler cfq registered (default)
[ 35.357962] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 35.357981] assign_interrupt_mode Found MSI capability
[ 35.357984] Allocate Port Service[0000:00:05.0:pcie00]
[ 35.378334] Real Time Clock Driver v1.12ac
[ 35.378374] Linux agpgart interface v0.101 (c) Dave Jones
[ 35.378377] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 35.378849] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) ->
IRQ 17
[ 35.378858] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 35.378922] mice: PS/2 mouse device common for all mice
[ 35.379415] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 35.379618] input: Macintosh mouse button emulation as /class/input/input0
[ 35.379648] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 35.379652] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 35.379925] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64
irq 1,12
[ 35.396968] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 35.413716] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 35.413720] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 35.413723] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 35.413725] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 35.413727] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 35.413813] TCP cubic registered
[ 35.413821] NET: Registered protocol family 1
[ 35.413827] NET: Registered protocol family 8
[ 35.413828] NET: Registered protocol family 20
[ 35.414831] ACPI: (supports S0 S3 S4 S5)
[ 35.414870] Magic number: 15:720:786
[ 35.414955] hash matches device ptyq8
[ 35.414983] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 35.415083] Freeing unused kernel memory: 304k freed
[ 35.428751] input: AT Translated Set 2 keyboard as /class/input/input1
[ 36.587545] Capability LSM initialized
[ 36.598938] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
[EMAIL PROTECTED]
[ 36.627141] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 36.627147] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 36.636893] ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active
threshold [0] [20060707]
[ 36.639185] ACPI: Thermal Zone [THRM] (0 C)
[ 36.682186] md: linear personality registered for level -1
[ 36.684183] md: multipath personality registered for level -4
[ 36.685829] md: raid0 personality registered for level 0
[ 36.687991] md: raid1 personality registered for level 1
[ 36.689541] raid5: automatically using best checksumming function:
generic_sse
[ 36.706267] generic_sse: 6419.000 MB/sec
[ 36.706269] raid5: using function: generic_sse (6419.000 MB/sec)
[ 36.774168] raid6: int64x1 2011 MB/s
[ 36.842036] raid6: int64x2 2708 MB/s
[ 36.909920] raid6: int64x4 2807 MB/s
[ 36.977797] raid6: int64x8 1939 MB/s
[ 37.045689] raid6: sse2x1 2805 MB/s
[ 37.113572] raid6: sse2x2 3760 MB/s
[ 37.181443] raid6: sse2x4 4053 MB/s
[ 37.181444] raid6: using algorithm sse2x4 (4053 MB/s)
[ 37.181447] md: raid6 personality registered for level 6
[ 37.181449] md: raid5 personality registered for level 5
[ 37.181450] md: raid4 personality registered for level 4
[ 37.197227] md: raid10 personality registered for level 10
[ 37.582997] usbcore: registered new interface driver usbfs
[ 37.583018] usbcore: registered new interface driver hub
[ 37.583038] usbcore: registered new device driver usb
[ 37.583669] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 37.583706] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) ->
IRQ 19
[ 37.583722] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 37.583929] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 1
[ 37.583950] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000
[ 37.618506] SCSI subsystem initialized
[ 37.623013] libata version 2.00 loaded.
[ 37.656979] usb usb1: configuration #1 chosen from 1 choice
[ 37.657005] hub 1-0:1.0: USB hub found
[ 37.657019] hub 1-0:1.0: 4 ports detected
[ 37.742557] ieee1394: Initialized config rom entry `ip1394'
[ 37.760596] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) ->
IRQ 19
[ 37.760619] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 37.760640] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 2
[ 37.760659] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000
[ 37.768882] 8139too Fast Ethernet driver 0.9.28
[ 37.820537] usb usb2: configuration #1 chosen from 1 choice
[ 37.820564] hub 2-0:1.0: USB hub found
[ 37.820581] hub 2-0:1.0: 4 ports detected
[ 37.924389] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) ->
IRQ 19
[ 37.924407] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 37.924429] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 3
[ 37.924490] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000
[ 37.924503] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 37.924590] usb usb3: configuration #1 chosen from 1 choice
[ 37.924615] hub 3-0:1.0: USB hub found
[ 37.924623] hub 3-0:1.0: 8 ports detected
[ 38.029093] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 38.029114] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) ->
IRQ 16
[ 38.029126] ATIIXP: chipset revision 0
[ 38.029127] ATIIXP: not 100% native mode: will probe irqs later
[ 38.029137] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA,
hdb:pio
[ 38.029153] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA,
hdd:pio
[ 38.029163] Probing IDE interface ide0...
[ 38.315916] hda: FUJITSU MHV2120AT PL, ATA DISK drive
[ 38.990028] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 38.990203] Probing IDE interface ide1...
[ 39.237871] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 39.451963] usb 1-1: configuration #1 chosen from 1 choice
[ 39.725458] hdc: TSSTcorpCD/DVDW TS-L532M, ATAPI CD/DVD-ROM drive
[ 39.756982] usb 1-4: new full speed USB device using ohci_hcd and address 4
[ 39.970120] usb 1-4: configuration #1 chosen from 1 choice
[ 40.272075] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 40.396011] ide1 at 0x170-0x177,0x376 on irq 15
[ 40.396826] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 23 (level, low) ->
IRQ 23
[ 40.447167] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23]
MMIO=[c0209000-c02097ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 40.447329] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 40.448008] eth0: RealTek RTL8139 at 0xffffc2000004c400, 00:0f:b0:bd:a9:69,
IRQ 22
[ 40.448011] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 40.449473] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 40.455746] hda: max request size: 128KiB
[ 40.455767] hda: 234441648 sectors (120034 MB) w/8192KiB Cache,
CHS=65535/16/63, UDMA(100)
[ 40.478139] usb 2-3: configuration #1 chosen from 1 choice
[ 40.482065] hub 2-3:1.0: USB hub found
[ 40.484034] hub 2-3:1.0: 3 ports detected
[ 40.534142] hda: cache flushes supported
[ 40.534191] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
[ 40.622643] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, DMA
[ 40.622650] Uniform CD-ROM driver Revision: 3.20
[ 40.799519] usb 2-3.1: new full speed USB device using ohci_hcd and address 3
[ 40.905436] usb 2-3.1: configuration #1 chosen from 1 choice
[ 40.970366] Attempting manual resume
[ 40.970370] swsusp: Resume From Partition 3:7
[ 40.970372] PM: Checking swsusp image.
[ 40.975038] PM: Resume from disk failed.
[ 40.981914] ReiserFS: hda3: found reiserfs format "3.6" with standard journal
[ 40.981923] ReiserFS: hda3: using ordered data mode
[ 40.991207] ReiserFS: hda3: journal params: device hda3, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[ 40.993042] ReiserFS: hda3: checking transaction log (hda3)
[ 41.034095] ReiserFS: hda3: Using r5 hash to sort names
[ 41.118996] usb 2-3.3: new low speed USB device using ohci_hcd and address 4
[ 41.225907] usb 2-3.3: configuration #1 chosen from 1 choice
[ 41.229818] usbcore: registered new interface driver hiddev
[ 41.233912] input: Dell Dell USB Keyboard Hub as /class/input/input2
[ 41.233923] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on
usb-0000:00:13.1-3.1
[ 41.242823] input: Dell Dell USB Keyboard Hub as /class/input/input3
[ 41.242829] input: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on
usb-0000:00:13.1-3.1
[ 41.247831] input: Logitech Optical USB Mouse as /class/input/input4
[ 41.247845] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on
usb-0000:00:13.1-3.3
[ 41.247851] usbcore: registered new interface driver usbhid
[ 41.247853] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 41.713774] ieee1394: Host added: ID:BUS[0-00:1023] GUID[5c3f02005616407d]
[ 43.437168] eth1: link up, 10Mbps, half-duplex, lpa 0x0000
[ 45.126092] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 45.282997] NET: Registered protocol family 17
[ 45.376871] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.445196] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 45.473854] ieee80211_crypt: registered algorithm 'NULL'
[ 45.475835] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 45.475837] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL
PROTECTED]>
[ 45.939549] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 45.939553] sdhci: Copyright(c) Pierre Ossman
[ 45.939587] sdhci: SDHCI controller found at 0000:06:04.4 [104c:8034] (rev 0)
[ 45.939611] ACPI: PCI Interrupt 0000:06:04.4[A] -> GSI 20 (level, low) ->
IRQ 20
[ 45.939680] mmc0: SDHCI at 0xc020a000 irq 20 DMA
[ 45.943730] mmc1: SDHCI at 0xc0209c00 irq 20 DMA
[ 45.943764] mmc2: SDHCI at 0xc0209800 irq 20 DMA
[ 46.065062] Yenta: CardBus bridge found at 0000:06:04.0 [103c:30a4]
[ 46.065089] Yenta: Enabling burst memory read transactions
[ 46.065095] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 46.065097] Yenta: Routing CardBus interrupts to ISA
[ 46.065103] Yenta TI: socket 0000:06:04.0, mfunc 0x00a61b22, devctl 0x64
[ 46.294465] Yenta: ISA IRQ mask 0x0ef8, PCI irq 20
[ 46.294471] Socket status: 30000411
[ 46.294474] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 46.294478] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 46.294480] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 46.497714] bcm43xx driver
[ 46.497814] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) ->
IRQ 21
[ 46.805139] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps:
0xa04713/0x200000
[ 46.873094] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[ 46.937577] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev
3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8604
[ 46.937599] usbcore: registered new interface driver usblp
[ 46.937602] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 46.962089] input: PC Speaker as /class/input/input6
[ 47.028876] ACPI: PCI Interrupt 0000:06:04.3[B] -> GSI 23 (level, low) ->
IRQ 23
[ 47.239980] pccard: PCMCIA card inserted into slot 0
[ 47.252241] Bluetooth: Core ver 2.11
[ 47.252294] NET: Registered protocol family 31
[ 47.252296] Bluetooth: HCI device and connection manager initialized
[ 47.252299] Bluetooth: HCI socket layer initialized
[ 48.048027] Bluetooth: HCI USB driver ver 2.9
[ 48.098794] usbcore: registered new interface driver hci_usb
[ 48.192526] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) ->
IRQ 17
[ 48.266185] cs: memory probe 0x88000000-0x8bffffff: excluding
0x88000000-0x8bffffff
[ 48.266204] cs: memory probe 0xc0200000-0xc02fffff: excluding
0xc0200000-0xc020ffff
[ 48.277491] pcmcia: registering new device pcmcia0.0
[ 48.483459] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) ->
IRQ 17
[ 48.556744] airo(): Probing for PCI adapters
[ 48.593659] MC'97 0 converters and GPIO not ready (0x1)
[ 48.596976] airo(): Finished probing for PCI adapters
[ 48.602449] pcmcia: request for exclusive IRQ could not be fulfilled.
[ 48.602453] pcmcia: the driver needs updating to supported shared IRQ lines.
[ 49.793572] airo(eth2): cmd:111 status:7f11 rsp0:2 rsp1:0 rsp2:0
[ 49.793582] airo(eth2): Doing fast bap_reads
[ 49.855511] airo(eth2): WPA is supported.
[ 49.857571] airo(eth2): MAC enabled 0:f:f8:4e:e8:15
[ 49.858151] eth2: index 0x05: , Vpp 5.0, irq 20, io 0xa100-0xa13f
[ 49.984841] lp: driver loaded but no devices found
[ 50.035206] Adding 1461872k swap on
/dev/disk/by-uuid/64d0356b-3f0c-45a2-a704-2f609af315f9. Priority:-1 extents:1
across:1461872k
[ 71.942506] ReiserFS: dm-8: found reiserfs format "3.6" with standard journal
[ 71.942520] ReiserFS: dm-8: using ordered data mode
[ 71.942851] ReiserFS: dm-8: journal params: device dm-8, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[ 71.944726] ReiserFS: dm-8: checking transaction log (dm-8)
[ 71.989135] ReiserFS: dm-8: Using r5 hash to sort names
[ 72.023862] ReiserFS: dm-9: found reiserfs format "3.6" with standard journal
[ 72.023876] ReiserFS: dm-9: using ordered data mode
[ 72.024149] ReiserFS: dm-9: journal params: device dm-9, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[ 72.026054] ReiserFS: dm-9: checking transaction log (dm-9)
[ 72.043770] ReiserFS: dm-9: Using r5 hash to sort names
[ 72.064889] ReiserFS: dm-10: found reiserfs format "3.6" with standard
journal
[ 72.064905] ReiserFS: dm-10: using ordered data mode
[ 72.065183] ReiserFS: dm-10: journal params: device dm-10, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 72.067142] ReiserFS: dm-10: checking transaction log (dm-10)
[ 72.118662] ReiserFS: dm-10: Using r5 hash to sort names
[ 72.164629] ReiserFS: dm-11: found reiserfs format "3.6" with standard
journal
[ 72.164644] ReiserFS: dm-11: using ordered data mode
[ 72.164913] ReiserFS: dm-11: journal params: device dm-11, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 72.166654] ReiserFS: dm-11: checking transaction log (dm-11)
[ 72.211043] ReiserFS: dm-11: Using r5 hash to sort names
[ 80.594027] Using specific hotkey driver
[ 80.662856] ACPI: AC Adapter [ACAD] (on-line)
[ 80.672483] No dock devices found.
[ 80.747915] input: Power Button (FF) as /class/input/input7
[ 80.757784] ACPI: Power Button (FF) [PWRF]
[ 80.784792] input: Sleep Button (FF) as /class/input/input8
[ 80.794685] ACPI: Sleep Button (FF) [SLPF]
[ 80.821654] input: Lid Switch as /class/input/input9
[ 80.831454] ACPI: Lid Switch [LID]
[ 80.858499] input: Power Button (CM) as /class/input/input10
[ 80.868291] ACPI: Power Button (CM) [PWRB]
[ 80.923692] ibm_acpi: ec object not found
[ 80.985406] ACPI: Battery Slot [BAT1] (battery present)
[ 80.995045] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 81.147560] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-40
processors (version 2.00.00)
[ 81.147606] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x4
[ 81.147608] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6
[ 81.147610] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8
[ 81.147612] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0xa
[ 81.147614] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x16
[ 81.148499] powernow-k8: ph2 null fid transition 0xe
[ 97.740013] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 98.942513] ppdev: user-space parallel port driver
[ 101.033117] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 105.430437] Bluetooth: L2CAP ver 2.8
[ 105.430441] Bluetooth: L2CAP socket layer initialized
[ 105.433490] Bluetooth: RFCOMM socket layer initialized
[ 105.433507] Bluetooth: RFCOMM TTY layer initialized
[ 105.433509] Bluetooth: RFCOMM ver 1.8
[ 106.937459] NET: Registered protocol family 10
[ 106.937522] lo: Disabled Privacy Extensions
[ 110.470873] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 110.526512] ISO 9660 Extensions: RRIP_1991A
[ 110.899894] eth1: no IPv6 routers present
[ 110.926033] eth2: no IPv6 routers present
[ 111.575742] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 128.496033] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 138.161752] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 146.604416] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 164.152708] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 240.256377] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 311.089018] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 357.130722] Using specific hotkey driver
[ 357.234038] ibm_acpi: ec object not found
[ 357.343167] pcc_acpi: loading...
[ 357.354386] wmi_add device=ffff81007c972000
[ 357.355099] calling WQBA
[ 417.083344] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 473.587737] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 545.415969] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 601.998321] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 656.880621] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 716.268064] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 716.372524] Netfilter messages via NETLINK v0.30.
[ 716.671087] nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
[ 718.290659] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 723.647312] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=202.97.238.130
DST=67.176.170.195 LEN=485 TOS=0x00 PREC=0x00 TTL=44 ID=0 DF PROTO=UDP
SPT=54003 DPT=1027 LEN=465
[ 723.654847] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=202.97.238.130
DST=67.176.170.195 LEN=485 TOS=0x00 PREC=0x00 TTL=44 ID=0 DF PROTO=UDP
SPT=54003 DPT=1027 LEN=465
[ 793.383919] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 796.570153] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=221.208.208.101
DST=67.176.170.195 LEN=486 TOS=0x00 PREC=0x00 TTL=43 ID=0 DF PROTO=UDP
SPT=45874 DPT=1027 LEN=466
[ 800.738871] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=61.238.56.238
DST=67.176.170.195 LEN=90 TOS=0x00 PREC=0x00 TTL=110 ID=48907 PROTO=UDP
SPT=9708 DPT=6881 LEN=70
[ 806.217189] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=61.238.56.238
DST=67.176.170.195 LEN=126 TOS=0x00 PREC=0x00 TTL=110 ID=57916 PROTO=UDP
SPT=9708 DPT=6881 LEN=106
[ 835.378262] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=1749 DF PROTO=TCP
SPT=80 DPT=47567 WINDOW=15325 RES=0x00 ACK URGP=0
[ 835.497875] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=44502 DF PROTO=TCP
SPT=80 DPT=47567 WINDOW=15325 RES=0x00 ACK URGP=0
[ 835.737120] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=30937 DF PROTO=TCP
SPT=80 DPT=47567 WINDOW=15325 RES=0x00 ACK URGP=0
[ 836.215779] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=13792 DF PROTO=TCP
SPT=80 DPT=47567 WINDOW=15325 RES=0x00 ACK URGP=0
[ 837.172911] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=49646 DF PROTO=TCP
SPT=80 DPT=47567 WINDOW=15325 RES=0x00 ACK URGP=0
[ 838.153959] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available
or load failed.
[ 838.489441] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=35839 DF PROTO=TCP
SPT=80 DPT=55997 WINDOW=5762 RES=0x00 ACK URGP=0
[ 838.848122] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=8966 DF PROTO=TCP
SPT=80 DPT=55997 WINDOW=5762 RES=0x00 ACK URGP=0
[ 839.087359] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=36105 DF PROTO=TCP
SPT=80 DPT=47567 WINDOW=15325 RES=0x00 ACK URGP=0
[ 839.565835] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=5135 DF PROTO=TCP
SPT=80 DPT=55997 WINDOW=5762 RES=0x00 ACK URGP=0
[ 841.002352] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=40752 DF PROTO=TCP
SPT=80 DPT=55997 WINDOW=5762 RES=0x00 ACK URGP=0
[ 842.916266] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=24141 DF PROTO=TCP
SPT=80 DPT=47567 WINDOW=15325 RES=0x00 ACK URGP=0
[ 844.264776] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=24667 DF PROTO=TCP
SPT=80 DPT=55997 WINDOW=5762 RES=0x00 ACK URGP=0
[ 857.036232] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=51904 DF PROTO=TCP
SPT=80 DPT=55997 WINDOW=5762 RES=0x00 ACK URGP=0
[ 857.993568] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=9678 DF PROTO=TCP
SPT=80 DPT=47567 WINDOW=15325 RES=0x00 ACK URGP=0
[ 872.233385] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=26238 DF PROTO=TCP
SPT=80 DPT=55997 WINDOW=5762 RES=0x00 ACK URGP=0
[ 877.806184] Inbound IN=eth1 OUT=
MAC=00:0f:b0:bd:a9:69:00:01:5c:22:54:c2:08:00 SRC=130.57.5.25
DST=67.176.170.195 LEN=41 TOS=0x00 PREC=0x00 TTL=113 ID=44736 DF PROTO=TCP
SPT=80 DPT=47567 WIN
-------------------------------------------------------------------------------
lspci -vvnn
-----------
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950]
(rev 01)
Subsystem: Hewlett-Packard Company Unknown device [103c:30a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:05.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:5a37]
(prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host
Controller [1002:4374] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller
[1002:4374]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host
Controller [1002:4375] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller
[1002:4375]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host
Controller [1002:4373] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller
[1002:4373]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller
[1002:4372] (rev 11)
Subsystem: Hewlett-Packard Company Unknown device [103c:30a4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 8400 [size=16]
Region 1: Memory at c0003000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:14.1 IDE interface [0101]: ATI Technologies Inc Standard Dual Channel PCI
IDE Controller ATI [1002:4376] (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device [103c:30a4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8410 [size=16]
Capabilities: <access denied>
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
[1002:4377]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
[1002:4371] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c0200000-c02fffff
Prefetchable memory behind bridge: 88000000-8bffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400
AC'97 Audio Controller [1002:4370] (rev 02)
Subsystem: Hewlett-Packard Company Unknown device [103c:30a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c0003400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:14.6 Modem [0703]: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller
[1002:4378] (rev 02) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company Unknown device [103c:30a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c0003800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc ATI Radeon
XPRESS 200M 5955 (PCIE) [1002:5955] (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company Unknown device [103c:30a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 7
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
06:02.0 Network controller [0280]: Broadcom Corporation BCM4311 [AirForce 54g]
802.11a/b/g PCI Express Transceiver [14e4:4319] (rev 02)
Subsystem: Hewlett-Packard Company Unknown device [103c:1358]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: Memory at c0204000 (32-bit, non-prefetchable) [size=8K]
06:04.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus
Controller [104c:8031]
Subsystem: Hewlett-Packard Company Unknown device [103c:30a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0208000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
Memory window 0: 88000000-8bfff000 (prefetchable)
Memory window 1: 8c000000-8ffff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite+
16-bit legacy interface ports at 0001
06:04.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394
Host Controller [104c:8032] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:30a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 23
Region 0: Memory at c0209000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
06:04.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated
FlashMedia Controller [104c:8033]
Subsystem: Hewlett-Packard Company Unknown device [103c:30a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 23
Region 0: Memory at c0206000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
06:04.4 Generic system peripheral [0805]: Texas Instruments
PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034]
Subsystem: Hewlett-Packard Company Unknown device [103c:30a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c020a000 (32-bit, non-prefetchable) [size=256]
Region 1: Memory at c0209c00 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at c0209800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
06:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Hewlett-Packard Company Unknown device [103c:30a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at c020a400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
> From: [EMAIL PROTECTED]> Date: Tue, 13 Mar 2007 17:45:44 +0000> Subject: [Bug
> 91968] Re: Suspend and Hibernate do not work in HP Pavilion dv5000> To:
> [EMAIL PROTECTED]> > Thanks for taking the time to report this bug and
> helping to make Ubuntu better. Unfortunately we can't fix it, because your
> description doesn't yet have enough information.> Please include the
> following additional information, if you have not already done so (please pay
> attention to lspci's additional options), as required by the Ubuntu Kernel
> Team:> 1. Please include the output of the command 'uname -a' in your next
> response. It should be one, long line of text which includes the exact kernel
> version you're running, as well as the CPU architecture.> 2. Please run the
> command 'dmesg > dmesg.log' and attach the resulting file 'dmesg.log' to this
> bug report.> 3. Please run the command 'lspci -vvnn > lspci-vvnn.log' and
> attach the resulting file 'lspci-vvnn.log' to this bug report.> For your
> reference, the full description of procedures for kernel-related bug reports
> is available at http://wiki.ubuntu.com/DebuggingKernelProblems . Thanks in
> advance!> > ** Changed in: Ubuntu> Assignee: (unassigned) => Brian
> Murray> Status: Unconfirmed => Needs Info> > -- > Suspend and
> Hibernate do not work in HP Pavilion dv5000> https://launchpad.net/bugs/91968
_________________________________________________________________
Discover the new Windows Vista
http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE
--
Suspend and Hibernate do not work in HP Pavilion dv5000
https://launchpad.net/bugs/91968
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
