Public bug reported:
Binary package hint: debian-installer
so the problem is:
I have HP310 G5 (sata software raid in bios turned off)
im trying install ubuntu on softraid (mdadm) and as result I have 2 critical
bugs (regressions since 8.04)
i did dd if=/dev/zero of=/dev/sdX bs=10M on both SATA disks before
installation
my layout is simple, its /boot ext2 , / ext4 (lvm2), swap (lvm2)
and disk has parted to (both sata disks)
300M (for /boot) [raid0]
400G (lvm2 VolumeGroup1)[raid0]
1. after boot, i have lost my /boot, im expecting to get /dev/md0 but have
/dev/md1p1 instead ?!?! with BROKEN raid for /boot. /dev/md1 with lvm2 works ok
2. in system log too many messages about incorrect partitions sizes and
overlaps etc. this looks like installer make incorrect partitioning.
when partitioning its produce sizes of partitions smaller ~1M and leave
free space over md volumes, in 8.04 all ok here
NB: installation same way with 8.04 on same hardware step by step = 100%
success, no problems
** Affects: debian-installer (Ubuntu)
Importance: Undecided
Status: New
--
debian-installer lucid soft raid1+lvm2 incorrect part sizes and unable boot
https://bugs.launchpad.net/bugs/559887
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
