Hi, I tried to upgrade to 10.04 LTS beta but upgrade failed miserably. Upgrade didn't detect dmraid and as consequence didn't come up after reboot. I downgraded back to 8.04 LTS ...
See bug #560748 Br Pekka On Tue, 2010-04-06 at 20:51 +0000, Phillip Susi wrote: > Can you test with Karmic or a Lucid Beta? 8.04 is quite old now so this > has probably been fixed. > > -- > udev fails to create UUID's under /dev/disk/by-uuid > https://bugs.launchpad.net/bugs/378429 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “dmraid” package in Ubuntu: Incomplete > > Bug description: > I've discovered recently that I can't get my hard disks properly identified > by udev. I did not notice this earlier as it was working until I tried to > upgrade to 9.04 Intrepid (which failed for other reasons causing rollback). > The system originated from 7.10 from which I upgraded until 9.04. > > I tried live-cd's of 7.10, 8.04 and 8.10; none of these contain udev which > would create /dev/disk/by-uuid directory and UUID entries within. The only > directories I can find are /dev/disk/by-path and /dev/disk/by-id. > > I have fakeraid configuration and the missing /dev/disk/by-uuid/ directory > appears when I install dmraid. However the directory is gone after reboot. > The only way to refer to disks is to use /dev/mapper/xxx notation. > > My mobo is asus m2n which contains NVIDIA nForce 430 circuit. I've 4 > identical sata disks which are in fakeraid 0+1 configuration. Below is a > snapshot of udevadm info (on 8.04, 2.5.24-24 kernel): > > r...@home-ws1:/# udevadm info --attribute-walk -n > /dev/disk/by-id/ata-WDC_WD2500AAJS-00VTA0_WD-WMART1409195 > > Udevinfo starts with the device specified by the devpath and then > walks up the chain of parent devices. It prints for every device > found, all possible attributes in the udev rules key format. > A rule to match, can be composed by the attributes of the device > and the attributes from one single parent device. > > looking at device '/block/sdc': > KERNEL=="sdc" > SUBSYSTEM=="block" > DRIVER=="" > ATTR{dev}=="8:32" > ATTR{range}=="16" > ATTR{removable}=="0" > ATTR{size}=="488397168" > ATTR{stat}==" 12300 18464 494003 80432 12347 18560 > 247632 153328 0 44472 233816" > ATTR{capability}=="12" > > looking at parent device > '/devices/pci0000:00/0000:00:08.1/host2/target2:0:0/2:0:0:0': > KERNELS=="2:0:0:0" > SUBSYSTEMS=="scsi" > DRIVERS=="sd" > ATTRS{device_blocked}=="0" > ATTRS{type}=="0" > ATTRS{scsi_level}=="6" > ATTRS{vendor}=="ATA " > ATTRS{model}=="WDC WD2500AAJS-0" > ATTRS{rev}=="01.0" > ATTRS{state}=="running" > ATTRS{timeout}=="30" > ATTRS{iocounterbits}=="32" > ATTRS{iorequest_cnt}=="0x605b" > ATTRS{iodone_cnt}=="0x605b" > ATTRS{ioerr_cnt}=="0x0" > ATTRS{modalias}=="scsi:t-0x00" > ATTRS{evt_media_change}=="0" > ATTRS{queue_depth}=="1" > ATTRS{queue_type}=="none" > > looking at parent device > '/devices/pci0000:00/0000:00:08.1/host2/target2:0:0': > KERNELS=="target2:0:0" > SUBSYSTEMS=="" > DRIVERS=="" > > looking at parent device '/devices/pci0000:00/0000:00:08.1/host2': > KERNELS=="host2" > SUBSYSTEMS=="" > DRIVERS=="" > > looking at parent device '/devices/pci0000:00/0000:00:08.1': > KERNELS=="0000:00:08.1" > SUBSYSTEMS=="pci" > DRIVERS=="sata_nv" > ATTRS{vendor}=="0x10de" > ATTRS{device}=="0x03f6" > ATTRS{subsystem_vendor}=="0x1043" > ATTRS{subsystem_device}=="0x8234" > ATTRS{class}=="0x010485" > ATTRS{irq}=="23" > ATTRS{local_cpus}=="03" > ATTRS{modalias}=="pci:v000010DEd000003F6sv00001043sd00008234bc01sc04i85" > ATTRS{numa_node}=="-1" > ATTRS{enable}=="1" > ATTRS{broken_parity_status}=="0" > ATTRS{msi_bus}=="" > > looking at parent device '/devices/pci0000:00': > KERNELS=="pci0000:00" > SUBSYSTEMS=="" > DRIVERS=="" > > ===================================================== > > The kernel info > Linux home-ws1 2.6.24-24-generic #1 SMP Wed Apr 15 15:11:35 UTC 2009 x86_64 > GNU/Linux > > ===================================================== > > Version signature > Ubuntu 2.6.24-24.53-generic > > ===================================================== > > System info > r...@home-ws1:/# sudo lspci -vnvn > 00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller > [10de:03ea] (rev a1) > Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8234] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: [44] HyperTransport: Slave or Primary Interface > Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL- > Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- > <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- > Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit > DwFcInEn- LWO=16bit DwFcOutEn- > Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ > <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- > Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit > DwFcInEn- LWO=8bit DwFcOutEn- > Revision ID: 1.03 > Link Frequency 0: 1.0GHz > Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- > Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- > Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- > Link Frequency 1: 200MHz > Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- > Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- > 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- > Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- > SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- > Prefetchable memory behind bridge Upper: 00-00 > Bus Number: 00 > Capabilities: [dc] HyperTransport: MSI Mapping > > 00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] > (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8234] > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 > Region 0: I/O ports at 0900 [size=256] > > 00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8234] > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at cc00 [size=64] > Region 4: I/O ports at 0600 [size=64] > Region 5: I/O ports at 0700 [size=64] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller > [10de:03f5] (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8234] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > > 00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller > [10de:03f1] (rev a3) (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8234] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 22 > Region 0: Memory at df6ff000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller > [10de:03f2] (rev a3) (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8234] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin B routed to IRQ 23 > Region 0: Memory at df6fec00 (32-bit, non-prefetchable) [size=256] > Capabilities: [44] Debug port > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME+ > > 00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] > (rev a1) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=02, sec-latency=64 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: df700000-dfefffff > Prefetchable memory behind bridge: be000000-bfffffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [b8] Subsystem: nVidia Corporation Unknown device > [10de:cb84] > Capabilities: [8c] HyperTransport: MSI Mapping > > 00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio > [10de:03f0] (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8234] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 (500ns min, 1250ns max) > Interrupt: pin B routed to IRQ 22 > Region 0: Memory at df6f8000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 > Enable- > Address: 0000000000000000 Data: 0000 > Masking: 00000000 Pending: 00000000 > Capabilities: [6c] HyperTransport: MSI Mapping > > 00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev > a2) (prog-if 8a [Master SecP PriP]) > Subsystem: Unknown device [f043:8234] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 (750ns min, 250ns max) > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) > [disabled] [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) > [disabled] [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) > [disabled] [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) > [disabled] [size=1] > Region 4: I/O ports at ffa0 [size=16] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8234] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 (250ns min, 5000ns max) > Interrupt: pin A routed to IRQ 508 > Region 0: Memory at df6fd000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at c480 [size=8] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 > Enable+ > Address: 00000000fee0300c Data: 4189 > Masking: 000000fe Pending: 00000000 > Capabilities: [6c] HyperTransport: MSI Mapping > > 00:08.0 RAID bus controller [0104]: nVidia Corporation MCP61 SATA Controller > [10de:03f6] (rev a2) (prog-if 85) > Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8234] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 20 > Region 0: I/O ports at c400 [size=8] > Region 1: I/O ports at c080 [size=4] > Region 2: I/O ports at c000 [size=8] > Region 3: I/O ports at bc00 [size=4] > Region 4: I/O ports at b880 [size=16] > Region 5: Memory at df6fc000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 > Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [cc] HyperTransport: MSI Mapping > > 00:08.1 RAID bus controller [0104]: nVidia Corporation MCP61 SATA Controller > [10de:03f6] (rev a2) (prog-if 85) > Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8234] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin B routed to IRQ 23 > Region 0: I/O ports at b800 [size=8] > Region 1: I/O ports at b480 [size=4] > Region 2: I/O ports at b400 [size=8] > Region 3: I/O ports at b080 [size=4] > Region 4: I/O ports at b000 [size=16] > Region 5: Memory at df6ef000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 > Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [cc] HyperTransport: MSI Mapping > > 00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge > [10de:03e8] (rev a2) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: dff00000-dfffffff > Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > Capabilities: [40] Subsystem: nVidia Corporation Unknown device > [10de:0000] > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 > Enable- > Address: 00000000fee0300c Data: 4151 > Capabilities: [60] HyperTransport: MSI Mapping > Capabilities: [80] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 > Link: Latency L0s <512ns, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x16 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- > Slot: Number 1, PowerLimit 75.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Off, PwrInd On, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > > 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge > [10de:03e9] (rev a2) (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Subsystem: nVidia Corporation Unknown device > [10de:0000] > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 > Enable- > Address: 00000000fee0300c Data: 4159 > Capabilities: [60] HyperTransport: MSI Mapping > Capabilities: [80] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 > Link: Latency L0s <512ns, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- > Slot: Number 2, PowerLimit 10.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Off, PwrInd On, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > > 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge > [10de:03e9] (rev a2) (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Subsystem: nVidia Corporation Unknown device > [10de:0000] > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 > Enable- > Address: 00000000fee0300c Data: 4161 > Capabilities: [60] HyperTransport: MSI Mapping > Capabilities: [80] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 > Link: Latency L0s <512ns, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- > Slot: Number 3, PowerLimit 10.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Off, PwrInd On, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Capabilities: [80] HyperTransport: Host or Secondary Interface > !!! Possibly incomplete decoding > Command: WarmRst+ DblEnd- > Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 > Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Revision ID: 1.02 > > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Address Map [1022:1101] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] DRAM Controller [1022:1102] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Miscellaneous Control [1022:1103] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Capabilities: [f0] #0f [0010] > > 01:08.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c475 [1180:0475] (rev 81) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 168 > Interrupt: pin A routed to IRQ 19 > Region 0: Memory at df700000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=01, secondary=02, subordinate=05, sec-latency=176 > Memory window 0: 88000000-8bfff000 (prefetchable) > Memory window 1: 8c000000-8ffff000 > I/O window 0: 0000d000-0000d0ff > I/O window 1: 0000d400-0000d4ff > BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ > 16-bit legacy interface ports at 0001 > > 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213 > Multiprotocol MAC/baseband processor [168c:0013] (rev 01) > Subsystem: D-Link System Inc D-Link AirPlus DWL-G650 Wireless Cardbus > Adapter(rev.C) [1186:3a12] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 128 bytes > Interrupt: pin A routed to IRQ 19 > Region 0: Memory at 8c000000 (32-bit, non-prefetchable) [size=64K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV630 [Radeon > HD 2600XT] [1002:9588] (prog-if 00 [VGA controller]) > Subsystem: PC Partner Limited Unknown device [174b:e540] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M] > Region 2: Memory at dfff0000 (64-bit, non-prefetchable) [size=64K] > Region 4: I/O ports at e800 [size=256] > Expansion ROM at dffc0000 [disabled] [size=128K] > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express Legacy Endpoint IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ > Device: Latency L0s <4us, L1 unlimited > Device: AtnBtn- AtnInd- PwrInd- > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 > Link: Latency L0s <64ns, L1 <1us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x16 > Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 > Enable- > Address: 0000000000000000 Data: 0000 > > 03:00.1 Audio device [0403]: ATI Technologies Inc RV630/M76 audio device > [Radeon HD 2600 Series] [1002:aa08] > Subsystem: PC Partner Limited Unknown device [174b:aa08] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 18 > Region 0: Memory at dffec000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express Legacy Endpoint IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ > Device: Latency L0s <4us, L1 unlimited > Device: AtnBtn- AtnInd- PwrInd- > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 > Link: Latency L0s <64ns, L1 <1us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x16 > Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 > Enable- > Address: 0000000000000000 Data: 0000 > > To unsubscribe from this bug, go to: > https://bugs.launchpad.net/ubuntu/+source/dmraid/+bug/378429/+subscribe -- udev fails to create UUID's under /dev/disk/by-uuid https://bugs.launchpad.net/bugs/378429 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
